Bio-coloration of bacterial cellulose assisted by immobilized laccase

Surface Gelatin-Coated β-Mannanase-Immobilized Lignin for Delayed Release of β-Mannanase to Remediate Guar-Based Fracturing Fluid Damage

Herein, we developed an efficient and convenient method to address the problem of thickener decomposition in the low- permeability oilfield production process. It is crucial to design breakers that reduce viscosity by delaying thickener decomposition in appropriate environments. By using lignin in biomass as a substrate for β-mannanase immobilization (MIL), we fabricated a gel breaker, surface gelatin-coated β-mannanase-immobilized lignin (Ge@MIL). Through experiments and performance tests, we confirmed that the prepared Ge@MIL can release enzymes at a specific temperature, meanwhile having temperature-sensitive phase change properties and biodegradability. The results also show the tight tuning over the surface coating of Ge@MIL by a water-in-oil emulsion. Therefore, the prepared Ge@MIL has a promising application in the field of oil extraction as a green and efficient temperature-sensitive sustained-release capsule.

Production of coffee-dyed bacterial cellulose as a bio-leather and using it as a dye adsorbent

Owing to its sustainability and environmentally friendliness, bacterial cellulose (BC) has received attention as a zero-waste textile material. Since the color of original BC was mostly yellowish white, a dyeing process is necessary to suggest BC as a textile. Thus, this study aimed to suggest a natural dyeing method using coffee to produce an eco-friendly coffee-dyed bacterial cellulose (BC-COF) bio-leather and to propose a reusing method as a dye adsorbent. To determine the dyeing and mordanting conditions with the highest color strength value, parameters such as dyeing temperature, time, mordanting methods were evaluated. Fourier-transform infrared spectroscopy and X-ray diffraction analysis confirmed that BC-COF was successfully colorized with coffee without changing its chemical and crystalline structures. In addition, field-emission scanning electron microscopy and Brunauer-Emmett-Teller surface area analysis confirmed that coffee molecules were successfully incorporated into fiber structures of BC. The effects of pH, concentration, temperature, and time on the adsorption of methylene blue dye using BC-COF bio-leather were also evaluated using ultraviolet-visible spectroscopy and zeta potential measurement. The results showed that BC-COF was found to be most effective when pH 6 of methylene blue solution with a concentration of 50 mg/L was adsorbed for 30 minutes at 25°C. Moreover, BC-COF could be reused for multiple times and had better dye adsorption rate compared to the original BC. From the results, it was confirmed that BC-COF could be employed as a dye adsorbent.

Characterization of Bioactive Colored Materials Produced from Bacterial Cellulose and Bacterial Pigments

A Bacterial Cellulose (BC) film was developed and characterized as a potential functional bioactive material. BC films, obtained from a microbial consortium of bacteria and yeast species, were functionalized with the bacterial pigment prodigiosin, produced by Serratia plymuthica, and flexirubin-type pigment, from Chryseobacterium shigense, which exhibit a wide range of biological properties. BC was successfully functionalized at 15% over the weight of the fiber at 40 °C during 60 min, and a color strength of 1.00 ± 0.01 was obtained for BC_prodigiosin and 0.38 ± 0.02 for BC_flexirubin-type pigment. Moreover, the BC films showed moderate hydrophilic character following alkaline treatment, which was maintained after both pigments were incorporated. The porosity and mechanical performance of the functionalized BC samples also remained unaffected. Furthermore, the BC samples functionalized with prodigiosin presented antibacterial activity and were able to inhibit the growth of pathogenic bacteria Staphylococcus aureus and Pseudomonas aeruginosa, with inhibition rates of 97.89 ± 0.60% and 85.12 ± 0.17%, respectively, while BC samples functionalized with flexirubin-type pigment exhibited the highest antioxidant activity, at 38.96 ± 0.49%. This research provides an eco-friendly approach to grant BC film-based material with color and advantageous bioactive properties, which can find application in several fields, especially for medical purposes.

Application of Bacterial Cellulose in the Textile and Shoe Industry: Development of Biocomposites

Several studies report the potential of bacterial cellulose (BC) in the fashion and leather industries. This work aimed at the development of BC-based composites containing emulsified acrylated epoxidized soybean oil (AESO) that are polymerized with the redox initiator system hydrogen peroxide (H2O2) and L-ascorbic acid and ferrous sulfate as a catalyst. BC was fermented under static culture. The polymerization of the emulsified organic droplets was tested before and after their incorporation into BC by exhaustion. The composites were then finished with an antimicrobial agent (benzalkonium chloride) and dyed. The obtained composites were characterized in terms of wettability, water vapor permeability (WVP), mechanical, thermal and antimicrobial properties. When AESO emulsion was polymerized prior to the exhaustion process, the obtained composites showed higher WVP, tensile strength and thermal stability. Meanwhile, post-exhaustion polymerized AESO conferred the composite higher hydrophobicity and elongation. The composites finished with the antimicrobial agent showed activity against S. aureus. Finally, intense colors were obtained more uniformly when they were incorporated simultaneously with the emulsified AESO with all the dyes tested.

Exploring current tendencies in techniques and materials for immobilization of laccases - A review

Nanotechnology has transformed the science behind many biotechnological sectors, and applied bio-catalysis is not the exception. In 2017, the enzyme industry was valued at more than 7 billion USD and projected to 10.5 billion by 2024. The laccase enzyme is an oxidoreductase capable of oxidizing phenolic and non-phenolic compounds that have been considered an essential tool in the fields currently known as white biotechnology and green chemistry. Laccase is one of the most robust biocatalysts due to its wide applications in different environmental processes such as detecting and treating chemical pollutants and dyes and pharmaceutical removal. However, these biocatalytic processes are usually limited by the lack of stability of the enzyme, the half-life time, and the application feasibility at an industrial scale. Physical or chemical approaches have performed different laccase's immobilization methods to improve its catalytic properties and reuse. Emerging technologies have been proven to reduce the manufacturing process cost and increase application feasibility while looking for ecological and economical materials that can be used as support. Therefore, this review discusses the trends of enzyme immobilization recently studied, analyzing biomaterials and agro-industrial waste used for that intention, their advantages, and disadvantages. Finally, the work also highlights the performance obtained with these materials and current challenges and potential alternatives.

A platform for functionalization of cellulose, chitin/chitosan, alginate with polydopamine: A review on fundamentals and technical applications

Nature provides concepts and materials with interesting functionalities to be implemented in innovative and sustainable materials. In this review, it is illustrated how the combination of biological macromolecules, i.e. polydopamine and polysaccharides (cellulose, chitin/chitosan, alginate), enables to create functional materials with controlled properties. The mussel-adhesive properties rely on the secretion of proteins having 3,4-dihydroxyphenylalanine amino acid with catechol groups. Fundamental understanding on the biological functionality and interaction mechanisms of dopamine in the mussel foot plaque is presented in parallel with the development of synthetic analogues through extraction or chemical polymer synthesis. Subsequently, modification of cellulose, chitin/chitosan or alginate and their nanoscale structures with polydopamine is discussed for various technical applications, including bio- and nanocomposites, films, filtration or medical membranes, adhesives, aerogels, or hydrogels. The presence of polydopamine stretches far beyond surface adhesive properties, as it can be used as an intermediate to provide additional performance of hydrophobicity, self-healing, antimicrobial, photocatalytic, sensoric, adsorption, biocompatibility, conductivity, coloring or mechanical properties. The dopamine-based 'green' chemistry can be extended towards generalized catechol chemistry for modification of polysaccharides with tannic acid, caffeic acid or laccase-mediated catechol functionalization. Therefore, the modification of polysaccharides with polydopamine or catechol analogues provides a general platform for sustainable material functionalization.

Lignocellulosic fibres surface interactions in enzymatic reaction using data-mining

Lignocellulosic fibres modification focused so far essentially on the resulting material properties to create functional fibres instead of determining the reaction influencing parameters. Using a data-mining algorithm, surface chemical composition of the fibres after modifications was compared to multiple signals. A 24 h reaction at either 25 °C or 60 °C, pH5 was conducted in presence of trans-ferulic acid, laccase, and lignocellulosic fibres (flax, hemp, or cellulose) having different chemical surface composition. Dimers and trimers were detected in variable concentrations in the reaction filtrate and extractive. At 25 °C, crystalline cellulose, amorphous cellulose, xylans, mannans, and lignins were well correlated to specific reaction products while at 60 °C, only lignins and xylan were found correlated to reaction products. Fibres surface composition affected the extractive profile. Lignocellulosic surface composition influence on the product formed was unveiled using a data mining approach. This study presents a way to unveil non-evident chemical interface interaction in reactions.

Magnetically Responsive PA6 Microparticles with Immobilized Laccase Show High Catalytic Efficiency in the Enzymatic Treatment of Catechol

Herewith we report the first attempt towards non-covalent immobilization of Trametes versicolor laccase on neat and magnetically responsive highly porous polyamide 6 (PA6) microparticles and their application for catechol oxidation. Four polyamide supports, namely neat PA6 and such carrying Fe, phosphate-coated Fe and Fe3O4 cores were synthesized in suspension by activated anionic ring-opening polymerization (AAROP) of ε-caprolactam (ECL). Enzyme adsorption efficiency up to 92% was achieved in the immobilization process. All empty supports and PA6 laccase complexes were characterized by spectral and synchrotron WAXS/SAXS analyses. The activity of the immobilized laccase was evaluated using 2,2’-Azino-bis-(3- ethylbenzothiazoline-6-sulfonic acid (ABTS) and compared to the native enzyme. The PA6 laccase conjugates displayed up to 105% relative activity at room temperature, pH 4, 40 °C and 20 mM ionic strength (citrate buffer). The kinetic parameters of the ABTS oxidation were also determined. The reusability of the immobilized laccase-conjugates was proven for five consecutive oxidation cycles of catechol.

Current progress on the production, modification, and applications of bacterial cellulose

Adoption of biomass for the development of biobased products has become a routine agenda in evolutionary metabolic engineering. Cellulose produced by bacteria is a "rising star" for this sustainable development. Unlike plant cellulose, bacterial cellulose (BC) shows several unique properties like a high degree of crystallinity, high purity, high water retention, high mechanical strength, and enhanced biocompatibility. Favored with those extraordinary properties, BC could serve as ideal biomass for the development of various industrial products. However, a low yield and the requirement for large growth media have been a persistent challenge in mass production of BC. A significant number of techniques has been developed in achieving efficient BC production. This includes the modification of bioreactors, fermentation parameters, and growth media. In this article, we summarize progress in metabolic engineering in order to solve BC growth limitation. This article emphasizes current engineered BC production by using various bioreactors, as well as highlighting the structure of BC fermented by different types of engineered-bioreactors. The comprehensive overview of the future applications of BC, aims to provide readers with insight into new economic opportunities of BC and their modifiable properties for various industrial applications. Modifications in chemical composition, structure, and genetic regulation, which preceded the advancement of BC applications, were also emphasized.

Functionalization of Bacterial Cellulose Nonwoven by Poly(fluorophenol) to Improve Its Hydrophobicity and Durability

The present study aims to improve the hydrophobicity and durability of bacterial cellulose (BC) nonwoven by functionalization with poly(fluorophenol). To this end, laccase was first entrapped onto BC and then used to polymerize the fluorophenol {4-[4-(trifluoromethyl) phenoxy] phenol} in-situ. The polymerization of fluorophenol by laccase was confirmed through 1H NMR and MALDI-TOF analyses. The effect of poly(fluorophenol) on BC nonwoven was determined by evaluation of the surface hydrophobicity and olephobicity properties such as water contact angle (WCA), oil contact angle (OCA), surface energy and water/oil absorption time. After BC functionalization with poly(fluorophenol) (20 mM), the WCA increased from 54.5 ± 1.2° to 120 ± 1.5° while the surface energy decreased (11.58 ± 1.4 mN/m). The OCA was also increased from 46.5 ± 2.5° to 87 ± 2° along to the decrease of surface energy (8.7 ± 1.5°). X-ray photoelectron spectroscopy (XPS) analysis confirmed an increase in the fluorine content in BC from 5.27 to 17.57%. The findings confirmed the polymerization of fluorophenol by laccase and its entrapment onto a BC nanofiber structure. The durability of the functionalization with poly(fluorophenol) was confirmed by evaluating the washing fastness, tensile strength after washing and dimensional stability. The results indicate that the functionalized BC nonwoven had higher tensile strength (×10 times) and better dimensional stability (30%) than the non-functionalized BC nonwoven material.

Effect of Additives on the in situ Laccase-Catalyzed Polymerization of Aniline Onto Bacterial Cellulose

Laccase-mediated systems are a green route to accelerate the oxidation of aniline and obtain polyaniline with conductive properties. The synthesis of green polyaniline (emeraldine salt) was herein improved by the inclusion of additives like sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and potassium hexacyanoferrate (II) (KHCF) in the medium. The aniline polymerization was confirmed by the detection of the absorption band typical of emeraldine salt at 420 nm, typical of the semiquinoid radical cation, and of the polaron absorption band at 700-800 nm, corresponding to the distinctive signal of doped or partial doped aniline. The oligomers and/or polymers obtained were characterized by spectrometry techniques, namely ¹H NMR and MALDI-TOF, and the bacterial cellulose (BC) conductivity was assessed by means of a four-point probe electrical conductivity technique. The best polymerization results were obtained with 5 mM AOT, 10 mM KHCF, and 25 U/mL of laccase. The synergistic effect between both additives in the presence of a catalyst leads to obtaining BC samples coated with green polyaniline with promising electric conductive properties.

Conductive bacterial cellulose by in situ laccase polymerization of aniline

Conductive and colored bacterial cellulose (BC) was developed by entrapment of polyaniline (PANi) onto dry BC membranes. The polyaniline was produced by in situ green polymerization of aniline by Myceliophthora thermophila laccase at pH = 4, 25°C, in the presence of a mediator, 1-hydroxybenzotriazol (HBT), using two different reactors, a water bath (WB) and an ultrasonic bath (US). MALDI-TOF and 1H NMR characterization of the experiment solutions confirmed the efficient polymerization of aniline by laccase. The dried BC membranes with entrapped polyaniline showed electrical conductive behavior and strong coloration, opening novel routes for the exploitation of functionalized bacterial cellulose as a green material for technical textiles, wearables, and other applications.

Enzyme-Lignin Nanocapsules Are Sustainable Catalysts and Vehicles for the Preparation of Unique Polyvalent Bioinks

Reactive lignin nanocapsules catalyze a pigmentation reaction to furnish an innovative type of sustainable polyvalent bioink. In this nanodevice, the pigment, vehicle, binder, and additive are included in a single confined spherical space. Bioinks with different shades of color, black, gray, yellow-like, pink-like, and red/brown hues, have been prepared by selecting the reactants and the pigmentation process. Lignin nanocapsules play multiple functions in the support and activation of the enzyme necessary for the synthesis of pigments. Lignin nanocapsules protected the melanin pigment from alkaline and UV-degradation treatment.