A comparison of biofiltration performance based on bacteria and fungi for treating toluene vapors from airflow

A comparison of the performance of bacterial biofilters and fungal-bacterial coupled biofilters in BTEp-X removal

Background

Conventional biofilters, which rely on bacterial activity, face challenges in eliminating hydrophobic compounds, such as aromatic compounds. This is due to the low solubility of these compounds in water, which makes them difficult to absorb by bacterial biofilms. Furthermore, biofilter operational stability is often hampered by acidification and drying out of the filter bed.

Methods

Two bioreactors, a bacterial biofilter (B-BF) and a fungal-bacterial coupled biofilter (F&B-BF) were inoculated with activated sludge from the secondary sedimentation tank of the Sinopec Yangzi Petrochemical Company wastewater treatment plant located in Nanjing, China. For approximately 6 months of operation, a F&B-BF was more effective than a B-BF in eliminating a gas-phase mixture containing benzene, toluene, ethylbenzene, and para-xylene (BTEp-X).

Results

After operating for four months, the F&B-BF showed higher removal efficiencies for toluene (T), ethylbenzene (E), benzene (B), and para-X (p-Xylene), at 96.9%, 92.6%, 83.9%, and 83.8%, respectively, compared to those of the B-BF (90.1%, 78.7%, 64.8%, and 59.3%). The degradation activity order for B-BF and F&B-BF was T > E > B > p-X. Similarly, the rates of mineralization for BTEp-X in the F&B-BF were 74.9%, 66.5%, 55.3%, and 45.1%, respectively, which were higher than those in the B-BF (56.5%, 50.8%, 43.8%, and 30.5%). Additionally, the F&B-BF (2 days) exhibited faster recovery rates than the B-BF (5 days).

Conclusions

It was found that a starvation protocol was beneficial for the stable operation of both the B-BF and F&B-BF. Community structure analysis showed that the bacterial genus Pseudomonas and the fungal genus Phialophora were both important in the degradation of BTEp-X. The fungal-bacterial consortia can enhance the biofiltration removal of BTEp-X vapors.

Low cost and renewable H2S-biofilter inoculated with Trichoderma harzianum

The use of biogas to produce hydrogen is currently gaining more attention. One of the drawbacks for the valorization of biogas is the presence of H2S, a hazardous molecule that can cause damage in the metallic internal structures of industries. In this study, the H2S-removal performance of a fungi-based biofilter was investigated. First, an H2S-resistant fungal species was isolated from an industrial digestate and identified as Trichoderma harzianum. The capacity of this microorganism to metabolize H2S in a mineral medium was confirmed. Then, a bioreactor was constructed and put in place to monitor the elimination of gaseous H2S. A mix of cardboard, perlite, woodchips, and wood pellets was used as filling. Microbial development and the outlet gas composition were monitored during a 60-day experimental process during which H2S was completely removed. 97% of the introduced sulphur was detected in the used filling material (fungal species + packing material) by elemental analysis. 24% of the detected sulphur was identified by ion-exchange chromatography as SO42-. Elemental analysis, gas chromatography, and ion-exchange chromatography were used to determine the bioreactor sulphur balance. Metagenomic analysis underlined that H2S elimination was due to the presence of Trichoderma harzianum with a H2S-specific bacterial consortium.

Effect of inoculum type, packing material and operational conditions on the biofiltration of a mixture of hydrophobic volatile organic compounds in air

The emission of volatile organic compounds (VOCs) into the atmosphere causes negative environmental and health effects. Biofiltration is known to be an efficient and cost-effective treatment technology for the removal of VOCs in waste gas streams. However, little is known on the removal of VOC mixtures and the effect of operational conditions, particularly for hydrophobic VOCs, and on the microbial populations governing the biofiltration process. In this study, we evaluated the effect of inoculum type (acclimated activated sludge (A-AS) versus Rhodococcus erythropolis) and packing material (mixture of compost and wood chips (C + WC) versus expanded perlite) on the removal of a mixture of hydrophobic VOCs (toluene, cyclohexane and hexane) in three biofilters (BFs), i.e., BF1: C + WC and R. erythropolis; BF2: C + WC and A-AS; and BF3: expanded perlite and R. erythropolis. The BFs were operated for 374 days at varying inlet loads (ILs) and empty bed residence times (EBRTs). The results showed that the VOCs were removed in the following order: toluene > cyclohexane > hexane, which corresponds to their air-water partitioning coefficient and thus bioavailability of each VOC. Toluene is the most hydrophilic VOC, while hexane is the most hydrophobic. BF2 outperformed BF1 and BF3 in each operational phase, with average maximum elimination capacities (ECmax) of 21 ± 3 g toluene m-3 h-1 (removal efficiency (RE): 100 %; EBRT: 82 s), 11 ± 2 g cyclohexane m-3 h-1 (RE: 86 ± 6 %; EBRT: 163 s) and 6.2 ± 0.9 g hexane m-3 h-1 (RE: 96 ± 4 %; EBRT: 245 s). Microbial analysis showed that despite having different inocula, the genera Rhodococcus, Mycobacterium and/or Pseudonocardia dominated in all BFs but at different relative abundances. This study provides new insights into the removal of difficult-to-degrade VOC mixtures with limited research to date on biofiltration.

Effects of Water Content and Irrigation of Packing Materials on the Performance of Biofilters and Biotrickling Filters: A Review

Biofilters (BFs) and biotrickling filters (BTFs) are two types of bioreactors used for treatment of volatile organic compounds (VOCs). Both BFs and BTFs use packing materials in which various microorganisms are immobilised. The water phase in BFs is stationary and used to maintain the humidity of packing materials, while BTFs have a mobile liquid phase. Optimisation of irrigation of packing materials is crucial for effective performance of BFs and BTFs. A literature review is presented on the influence of water content of packing materials on the biofiltration efficiency of various pollutants. Different configurations of BFs and BTFs and their influence on moisture distribution in packing materials were discussed. The review also presents various packing materials and their irrigation control strategies applied in recent biofiltration studies. The sources of this review included recent research articles from scientific journals and several review articles discussing BFs and BTFs.

Kinetics and equilibrium study for the biosorption of lanthanum by Penicillium simplicissimum INCQS 40,211

Lanthanum (La) is a light rare-earth element that plays an essential role in manufacturing technological products, clean technologies, medical products, electron cathodes, scintillators, fluorescent lamps, and fertilizers. This study is the first investigation of La³⁺ biosorption using inactive lyophilized biomass from Penicillium simplicissimum INCQS 40,211. The maximum sorption capacity (q_max) for P. simplicissimum was 7.81 mg g^-1. La ³⁺ biosorption followed the Freundlich model, where the biosorption system possibly multilayer coverage of P. simplicissimum by lanthanum ions. The kinetic data for the adsorption process obeyed a pseudo-second-order (R ² > 0.92), indicating chemical sorption. The results indicated that inactive lyophilized biomass from Penicillium simplicissimum INCQS 40211are an excellent candidate for removing light rare-earth elements from aquatic environments.

Biological-based methods for the removal of volatile organic compounds (VOCs) and heavy metals

The current scenario of increased population and industrial advancement leads to the spoliation of freshwater and tapper of the quality of water. These results decrease in freshwater bodies near all of the areas. Besides, organic and inorganic compounds discharged from different sources into the available natural water bodies are the cause of pollution. The occurrence of heavy metals in water and volatile organic compounds (VOCs) in the air is responsible for a vast range of negative impacts on the atmosphere and human health. Nonetheless, high uses of heavy metals for human purposes may alter the biochemical and geochemical equilibrium. The major air contaminants which are released into the surroundings known as VOCs are produced through different kinds of sources, such as petrochemical and pharmaceutical industries. VOCs are known to cause various health hazards. VOCs are a pivotal group of chemicals that evaporate readily at room temperature. To get over this problem, biofiltration technology has been evolved for the treatment of heavy metals using biological entities such as plants, algae, fungi, and bacteria. Biofiltration technology is a beneficial and sustainable method for the elimination of toxic pollutants from the aquatic environment. Various types of biological technologies ranging from biotrickling filters to biofilters have been developed and they are cost-effective, simple to fabricate, and easy to perform. A significant advantage of this process is the pollutant that is transformed into biodegradable trashes which can decompose within an average time period, thus yielding no secondary pollutants. The aim of this article is to scrutinize the role of biofiltration in the removal of heavy metals in wastewater and VOCs and also to analyze the recent bioremediation technologies and methods.