Degradation of oil products in a soil from a Russian Barents hot-spot during electrodialytic remediation

Comparison of 2- and 3-compartment electrodialytic remediation cells for oil polluted soil from northwest Russia

Electrodialytic remediation is a method based on electrokinetics, in which an electric field of low intensity increases the availability of pollutants in solid waste materials. The electric field induces processes that mobilise and transport inorganic and organic pollutants. The transport of ions in the electrodialytic cell is controlled by employing ion-exchange membranes, allowing separation of the electrodes from the solids. In this study, using a two cell design, electrodialytic experiments were conducted to compare remediation of a heavily oil-polluted soil from Arkhangelsk, Russia. The 2-compartment cell has not previously been employed for electrodialytic removal of organic pollutants and was tested along with the traditional 3-compartment design. The influence of experimental variables (current density, remediation time, stirring and light) and settings on the two cell designs was investigated. The highest removal (77%) of total hydrocarbons (THC) was observed in the 3-compartment cell at high current density (0.68 mA/cm²), longer remediation time (28 days), stirring and exposure to daylight. High current density and stirring increased the removal efficiencies in both cell designs. Within the studied experimental domain, the removal efficiencies in the 3-compartment cell (10-77%) were, however, higher than those observed in the 2-compartment cell (0-38%).

Simultaneous electrodialytic removal of PAH, PCB, TBT and heavy metals from sediments

Contaminated sediments are remediated in order to protect human health and the environment, with the additional benefit of using the treated sediments for other activities. Common for many polluted sediments is the contamination with several different pollutants, making remediation challenging with the need of different remedial actions for each pollutant. In this study, electrodialytic remediation (EDR) of sediments was found effective for simultaneous removal of heavy metals and organic pollutants for sediments from Arctic regions - Sisimiut in Greenland and Hammerfest in Norway. The influence of sediment properties and experimental settings on the remediation process was studied by employing multivariate analysis. The importance of the variables studied varied with the pollutant and based on these results it was possible to assess removal processes for the different pollutants. Desorption was found to be important for the removal of heavy metals and TBT, while photolysis was significant for removal of PAH, PCB and TBT. In addition, dechlorination was found to be important for the removal of PCB. The highest removal efficiencies were found for heavy metals, TBT and PCB (>40%) and lower removal efficiencies for PAH (<35%).