Sonocatalytic degradation of humic acid by N-doped TiO2 nano-particle in aqueous solution

Magnetic Fe-doped TiO2@Fe3O4 for metronidazole degradation in aqueous solutions: Characteristics and efficacy assessment

Antibiotics present in aquatic environments can contribute to the emergence of antibiotic-resistant bacterial strains, posing potential threats to public health. Therefore, efficient strategies to remove these compounds from water systems are essential to reduce both ecological and human health risks. This research aimed to assess the photocatalytic removal efficiency of metronidazole (MET) from an aqueous solution using a 15-W bare UVC lamp and magnetic nanocatalysts (Fe-doped TiO2@Fe3O4), which were synthesized using the sol-gel technique. Furthermore, scanning electron microscopy with integrated energy dispersive X-ray analysis (SEM/EDX), X-ray diffractometry (XRD), Differential reflectance spectroscopy (DRS), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FTIR) analysis were carried out to characterize the synthesized nanocatalysts. The influence of several factors, such as pH, initial MET, and nanocatalysts concentrations during reaction times of 15-120 min, was studied. The characterization results confirmed that Fe and Ti were successfully integrated into the Fe- doped TiO2@Fe3O4 nanocomposite. Highest MET degradation efficiency (99.37 %) was observed at a pH of 3, with an initial MET concentration of 60 mg/L, nanoparticle dosage of 800 mg/L, and a reaction time of 90 min. The stability of the nanocatalyst was acceptable. The results suggest that OH ions may play a crucial role in the degradation of MET demonstrating photocatalytic degradation can be an effective way to remove MET from water resources. This research sets a precedent for future endeavors aimed at harnessing photocatalysis for environmental remediation of pharmaceutical pollutants.

A systematic review of photocatalytic degradation of humic acid in aqueous solution using nanoparticles

OBJECTIVES

Humic acid (HA) compounds in the disinfection processes of drinking water and wastewater are considered as precursors of highly toxic, carcinogenic and mutagenic disinfectant by-products. The aim of this study was to systematically review all research studies on the photocatalytic degradation of humic acid and to evaluate the laboratory conditions and results of these studies.

CONTENT

The present systematic review was performed by searching the Scopus, PubMed, and web of science databases until December 2021. The parameters of type of catalyst, catalyst size, optimum pH, optimum initial concentration of humic Acid, optimum catalyst concentration, optimum time, light used and removal efficiency were investigated.

SUMMARY

395 studies were screened and using the inclusion and exclusion criteria, in total, 20 studies met our inclusion criteria and provided the information necessary to Photocatalytic degradation of humic acid by nanoparticles. In the investigated studies, the percentage of photocatalytic degradation of humic acid by nanoparticles was reported to be above 70%, and in some studies, the removal efficiency had reached 100%.

OUTLOOK

From the results of this systematic review, it was concluded that the photocatalytic process using nanoparticles has a high effect on the degradation of humic acid.

Synthesis of Fe-TiO2@Fe3O4 magnetic nanoparticles as a recyclable sonocatalyst for the degradation of 2, 4-dichlorophenol

2, 4-Dichlorophenol is a type of chlorophenol that, even at low concentrations, causes adverse effects such as anemia, coma, weakening of the nervous system, and cancer in humans and other organisms. Therefore, the aim of this study was to synthesize the Fe-TiO₂@Fe₃O₄ sonocatalyst and to assess the removal efficiency of 2, 4-dichlorophenol using this sonocatalyst. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), value-stream mapping (VSM), Brunauer Emmett Teller (BET), and diffuse reflectance spectroscopy (DRS) analyses were performed for characterizing the synthesized nanoparticles. The effect of different factors, such as pH (3-9), initial concentration 2, 4-dichlorophenol (20-80 mg/L), and level of nanoparticles (200-600 mg/L) at different time points (15-90 min), was assessed on sonocatalytic removal of 2, 4-dichlorophenol, and then the reaction kinetics, process mechanism, and stability of the synthesized nanoparticles were determined under optimal conditions. The highest removal efficiency of 2, 4-dichlorophenol and constant reaction rate was obtained at pH of 5, the initial concentration of 20 mg/L, and the nanoparticles dose of 400 mg/L under ultrasound with a frequency of 35 kHz following the reaction time of 90 min. The maximum mineralization efficiency (total organic carbon TOC) under optimal conditions was 81%. Analysis of the degradation kinetics indicated that the 2, 4-dichlorophenol degradation can follow a first-order reaction. The stability of the synthesized sonocatalyst decreased by 91% after 5 re-uses. This study confirmed the efficiency of the Fe-TiO₂@Fe₃O₄ sonocatalytic process in the degradation and mineralization of 2, 4-dichlorophenol.

Simple Quaternary Templating Systems for Direct Synthesis of Unique SBA-15 Mesopore Frameworks Embedded with High-Content TiO2 Nanoparticles as High-Performance Photocatalysts

This work presents a simple P123-based quaternary templating system using titanyl sulfate (TS) as the TiO₂ precursor and self-contained sulfuric acid as the catalyst (TS/TEOS/P123/H₂O). A unique structural configuration of SBA-15-type mesopore frameworks embedded with high-content TiO₂ nanoparticles can be directly obtained. Even with a high TiO₂ content (29.1 wt %), well-defined mesostructures free of pore blocking can be secured. A new structural formation mechanism is unveiled: a self-assembly process between inorganic species and P123 micelles yields ordered mesostructures catalyzed by self-contained TS in the low-temperature step, while sol-gel reaction and crystallization of TS coincide with processes of mesostructural re-organization and partial evacuation of P123 from mesopores. The incorporation of high-content TiO₂ nanoparticles into mesopore frameworks mainly happens during the hydrothermal treatment step. Not surprisingly, thanks to well-defined mesostructures containing high-content accessible TiO₂ nanoparticles, such TiO₂/SBA-15 composites show high activity and good reusability in photodegrading Rhodamine B and humic acids and photoreducing highly toxic Cr⁶⁺ in water under UV irradiation.

Novel catalytic degradation of Diazinon with ozonation/mg-Al layered double hydroxides: optimization, modeling, and dispersive liquid-liquid microextraction

PURPOSE

In this study MgAl- layered double hydroxides (MgAl-LDH) nanoparticles were prepared by a simple and fast co-precipitation method and used as a catalyst in the ozonation process to degrade diazinon from aqueous solutions.

METHODS

The structure of the synthesized MgAl-LDH was investigated by X-ray diffraction pattern (XRD) and field emission scanning electron microscope-energy dispersive spectroscopy (FESEM-EDX). The response surface methodology (RSM) was used to investigate the effects of different parameters including of reaction time, initial diazinon concentration, pH, and LDH dose on the removal of diazinon by MgAl-LDH catalytic ozonation process. Central Composite Design (CCD) was employed for the optimization and modeling of the process. Dispersive liquid-liquid microextraction (DLLME) method was used to extract diazinon from aqueous samples. The GC-Mass analysis was performed to determine intermediate compounds during diazinon degradation reactions. To evaluate the process performance, TOC and COD removal were measured under optimum conditions.

RESULTS

The highest removal efficiency of 92% was observed in optimum conditions as follow; initial diazinon concentration: 120 mg/L, pH: 8.25, LDH dose: 750 mg/L, and reaction time: 70 min. The quadratic model was obtained with a good fit. The removal of COD and TOC were 80% and 74%, respectively.

CONCLUSION

This process can be suggested and used in the treatment of various industrial wastewaters.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00687-w.

Evaluation of Sonocatalytic and Photocatalytic Processes Efficiency for Degradation of Humic Compounds Using Synthesized Transition-Metal-Doped ZnO Nanoparticles in Aqueous Solution

The existence of a humic substance in water causes the growth of microorganisms and reduces the quality of water; therefore, the removal of these materials is crucial. Here, the ZnO nanoparticles doped using transition metals, copper (Cu) and manganese (Mn), were used as an effective catalyst for photocatalytic removal of humic substances in an aqueous environment under ultraviolet, visible light, and light-emitting diode irradiations. Also, we study the effect of the sonocatalytic method. A solvothermal procedure is used for doping, and the Cu- and Mn-doped ZnO nanocatalyst were characterized by means of FTIR, XRD, AFM, SEM, and EDAX analyses. We investigate the effect of operational variables, including doping ratio, initial pH, catalyst dose, initial HS content, and illuminance on the removal efficiency of the processes. The findings of the analyses used for the characterization of the nanoparticles illustrate the appropriate synthesis of the Cu- and Mn-doped ZnO nanocatalysts. We observe the highest removal efficiency rate under acidic conditions and the process efficiency decreased with increasing solution pH, when we tested it in the range of 3–7. Photocatalytic decomposition of HS increases with a rise in catalyst dose, but an increase in initial HS content results in decreasing the removal efficiency. We observe the highest photocatalytic degradation of humic acid while using the visible light, and the highest removal efficiency is obtained using Cu.ZnO. The Cu.ZnO also shows better performance under ultraviolet irradiation compared to other agents.

Efficiency of Photocatalytic Degradation of Humic Acid Using Magnetic Nanoparticles (Fe-doped TiO2@Fe3O4) in Aqueous Solutions

Background: Among water pollutants, Natural Organic Matters (NOMs) are highly important for making problems in water treatment plants. Objectives: The main objective of this study was to investigate the efficiency of photocatalytic degradation of humic acid using magnetic nanoparticles (Fe-doped TiO2@Fe3O4) in aqueous solutions. Methods: In the present experiment, Fe-doped TiO2@Fe3O4 nanoparticles were synthesized by the sol-gel method, and SEM, XRD, and DRS analyzes were utilized to characterize the synthesized nanoparticles. The effects of various variables, including pH (3 - 11), initial concentration of humic acid (20 - 80 mg/L), and concentration of nanoparticles (250 - 2000 mg/L) at different reaction times (15 - 60 min) were investigated on the photocatalytic degradation of humic acid. Results: The maximum degradation efficiency of humic acid at pH 3, the initial humic acid concentration of 5 mg/L, nanoparticle dose of 400 mg/L, and reaction time of 60 min using a 15-W bare UV lamp. Conclusions: Due to the high efficiency of photocatalytic degradation, it is proposed to use for the removal of humic acid from water resources.

Performance of granular ferric hydroxide process for removal of humic acid substances from aqueous solution based on experimental design and response surface methodology

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic acid (HA) by granular ferric hydroxide (GFH) from aqueous solutions. The variables of pH (3–11), contact time (15–120 min), adsorbent dose (1–5 g/L) and initial concentration of humic acid (5–20 mg/L) were examined. The adsorption isotherms and kinetics of humic acid substances on granular ferric hydroxide (GFH) were studied. Also the design of the experiments was performed using R software by the CCD (central composite design) method. Variance analysis (ANOVA) was used as the statistical response analysis method. Result of this study proved the optimal values of the independent variables of the adsorbent dose, contact time, initial concentration of humic acid and pH were 4 g/L, 93.75 min, 16.25 mg/L, and 5, respectively. The experimental data followed the Langmuir isotherm and pseudo-second kinetic model. Based on the response surface methodology, higher HA removal efficiencies were obtained with acidic condition, longer reaction time, and appropriated loading amount of GFH.

Removal of precursors and disinfection by-products (DBPs) by membrane filtration from water; a review

Disinfection by-products (DBPs) have heterogeneous structures which are suspected carcinogens as a result of reactions between NOMs (Natural Organic Matter) and oxidants/disinfectants such as chlorine. Because of variability in DBPs characteristics, eliminate completely from drinking water by single technique is impossible. The current article reviews removal of the precursors and DBPs by different membrane filtration methods such as Microfiltration (MF), Ultrafiltration (UF), Nanofiltration (NF) and Reverse Osmosis (RO) techniques. Also, we provide an overview of existing and potentially Membrane filtration techniques, highlight their strengths and drawbacks. MF membranes are a suitable alternative to remove suspended solids and colloidal materials. However, NOMs fractions are effectively removed by negatively charged UF membrane. RO can remove both organic and inorganic DBPs and precursors simultaneously. NF can be used to remove compounds from macromolecular size to multivalent ions.

A novel technique for detoxification of phenol from wastewater: Nanoparticle Assisted Nano Filtration (NANF)

BACKGROUND

Phenol is one of the most versatile and important organic compound. It is also a growing concern as water pollutants due to its high persistence and toxicity. Removal of Phenol from wastewaters was investigated using a novel nanoparticle adsorption and nanofiltration technique named as Nanoparticle Assisted Nano Filtration (NANF).

METHODS

The nanoparticle used for NANF study were silver nanoparticles and synthesized to three distinct average particle sizes of 10 nm, 40 nm and 70 nm. The effect of nanoparticle size, their concentrations and their tri and diparticle combinations upon phenol removal were studied.

RESULTS

Total surface areas (TSA) for various particle size and concentrations have been calculated and the highest was 4710 × 10(12 )nm(2 )for 10 nm particles and 180 ppm concentration while the lowest was for 2461 × 10(11) for 70 nm and 60 ppm concentrations. Tri and diparticle studies showed more phenol removal % than that of their individual particles, particularly for using small particles on large membrane pore size and large particles at low concentrations. These results have also been confirmed with COD and toxicity removal studies.

CONCLUSIONS

The combination of nanoparticles adsorption and nanofiltration results in high phenol removal and mineralization, leading to the conclusion that NANF has very high potential for treating toxic chemical wastewaters.