Morphology controlled synthesis of 2-D Ni–Ni3S2 and Ni3S2 nanostructures on Ni foam towards oxygen evolution reaction

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

High-Alkaline Water-Splitting Activity of Mesoporous 3D Heterostructures: An Amorphous-Shell@Crystalline-Core Nano-Assembly of Co-Ni-Phosphate Ultrathin-Nanosheets and V- Doped Cobalt-Nitride Nanowires

Introducing amorphous and ultrathin nanosheets of transition bimetal phosphate arrays that are highly active in the oxygen evolution reaction (OER) as shells over an electronically modulated crystalline core with low hydrogen absorption energy for an excellent hydrogen evolution reaction (HER) can boost the sluggish kinetics of the OER and HER in alkaline electrolytes. Therefore, in this study, ultrathin and amorphous cobalt-nickel-phosphate (CoNiPOx ) nanosheet arrays are deposited over vanadium (V)-doped cobalt-nitride (V3% -Co4 N) crystalline core nanowires to obtain amorphous-shell@crystalline-core mesoporous 3D-heterostructures (CoNiPOx @V-Co4 N/NF) as bifunctional electrocatalysts. The optimized electrocatalyst shows extremely low HER and OER overpotentials of 53 and 270 mV at 10 mA cm-2 , respectively. The CoNiPOx @V3% -Co4 N/NF (+/-) electrolyzer utilizing the electrocatalyst as both anode and cathode demonstrates remarkable overall water-splitting activity, requiring a cell potential of only 1.52 V at 10 mA cm-2 , 30 mV lower than that of the RuO2 /NF (+)/20%-Pt/C/NF (-) electrolyzer. Such impressive bifunctional activities can be attributed to abundant active sites, adjusted electronic structure, lower charge-transfer resistance, enhanced electrochemically active surface area (ECSA), and surface- and volume-confined electrocatalysis resulting from the synergistic effects of the crystalline V3% -Co4 N core and amorphous CoNiPOx shells boosting water splitting in alkaline media.

Carbon Transition-metal Oxide Electrodes: Understanding the Role of Surface Engineering for High Energy Density Supercapacitors

Supercapacitors store electrical energy by ion adsorption at the interface of the electrode-electrolyte (electric double layer capacitance, EDLC) or through faradaic process involving direct transfer of electrons via oxidation/reduction reactions at one electrode to the other (pseudocapacitance). The present minireview describes the recent developments and progress of carbon-transition metal oxides (C-TMO) hybrid materials that show great promise as an efficient electrode towards supercapacitors among various material types. The review describes the synthetic methods and electrode preparation techniques along with the changes in the physical and chemical properties of each component in the hybrid materials. The critical factors in deriving both EDLC and pseudocapacitance storage mechanisms are also identified in the hope of pointing to the successful hybrid design principles. For example, a robust carbon-metal oxide interaction was identified as most important in facilitating the charge transfer process and activating high energy storage mechanism, and thus methodologies to establish a strong carbon-metal oxide contact are discussed. Finally, this article concludes with suggestions for the future development of the fabrication of high-performance C-TMO hybrid supercapacitor electrodes.

2D Free-Standing Nitrogen-Doped Ni-Ni3 S2 @Carbon Nanoplates Derived from Metal-Organic Frameworks for Enhanced Oxygen Evolution Reaction

2D metal-organic frameworks (2D MOFs) are promising templates for the fabrication of carbon supported 2D metal/metal sulfide nanocomposites. Herein, controllable synthesis of a newly developed 2D Ni-based MOF nanoplates in well-defined rectangle morphology is first realized via a pyridine-assisted bottom-up solvothermal treatment of NiSO₄ and 4,4'-bipyridine. The thickness of the MOF nanoplates can be controlled to below 20 nm, while the lateral size can be tuned in a wide range with different amounts of pyridine. Subsequent pyrolysis treatment converts the MOF nanoplates into 2D free-standing nitrogen-doped Ni-Ni₃ S₂ @carbon nanoplates. The obtained Ni-Ni₃ S₂ nanoparticles encapsulated in the N-doped carbon matrix exhibits high electrocatalytic activity in oxygen evolution reaction. A low overpotential of 284.7 mV at a current density of 10 mA cm^-2 is achieved in alkaline solution, which is among the best reported performance of substrate-free nickel sulfides based nanomaterials.

Electrocatalytic Water Splitting through the Ni x S y Self-Grown Superstructures Obtained via a Wet Chemical Sulfurization Process

We report water-splitting application of chemically stable self-grown nickel sulfide (Ni _x S _y ) electrocatalysts of different nanostructures including rods, flakes, buds, petals, etc., synthesized by a hydrothermal method on a three-dimensional Ni foam (NiF) in the presence of different sulfur-ion precursors, e.g., thioacetamide, sodium thiosulfate, thiourea, and sodium sulfide. The S^2- ions are produced after decomposition from respective sulfur precursors, which, in general, react with oxidized Ni²⁺ ions from the NiF at optimized temperatures and pressures, forming the Ni _x S _y superstructures. These Ni _x S _y electrocatalysts are initially screened for their structure, morphology, phase purity, porosity, and binding energy by means of various sophisticated instrumentation technologies. The as-obtained Ni _x S _y electrocatalyst from sodium thiosulfate endows an overpotential of 200 mV. The oxygen evolution overpotential results of Ni _x S _y electrocatalysts are comparable or superior to those reported previously for other self-grown Ni _x S _y superstructure morphologies.

Morphology and electronic structure modulation induced by fluorine doping in nickel-based heterostructures for robust bifunctional electrocatalysis

Fabrication of advanced electrocatalysts with high activity and durability is urgently needed to achieve energy conversion and pollution treatment at the same time. Herein, we highlight a fluorine-doped nickel-based heterostructure, in which fluorine doping displays a dual effect in Ni(OH)2 nanosheets/Ni3S2 heteronanorods. On the one hand, fluorine doping can facilitate the formation of Ni(OH)2 nanosheets/Ni3S2 heteronanorods through one-step in situ growth on nickel foams. The unique heterostructure enables good exposure of abundant active sites and highly active heterointerfaces. On the other hand, the uniform incorporation of fluorine can effectively modulate the electron density at the Fermi level of Ni3S2, contributing to the improved electrical conductivity and charge transfer efficiency, further improving the electrocatalytic activity in the oxygen evolution reaction (OER) and urea oxidation reaction (UOR). The optimal heterostructure presents a low overpotential of 360 mV to reach the OER current density of 100 mA cm-2. Finally, this heterostructure also displays a superior UOR anodic peak current of about 322.9 mA cm-2, almost the highest value at the anodic peak compared to the literature.

Metallic Ni3S2 Films Grown by Atomic Layer Deposition as an Efficient and Stable Electrocatalyst for Overall Water Splitting

We describe the direct preparation of crystalline Ni₃S₂ thin films via atomic layer deposition (ALD) techniques at temperatures as low as 250 °C without postthermal treatments. A new ALD chemistry is proposed using bis(1-dimethylamino-2-methyl-2-butoxy) nickel(II) [Ni(dmamb)₂] and H₂S as precursors. Homogeneous and conformal depositions of Ni₃S₂ films were achieved on 4 in. wafers (both metal and oxide substrates, including Au and SiO₂). The resulting crystalline Ni₃S₂ layers exhibited highly efficient and stable performance as electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in alkaline solutions, with a low overpotential of 300 mV and a high turnover frequency for HER and an overpotential of 400 mV for OER (at a current density of 10 mA/cm²). Using our Ni₃S₂ films as both the cathode and the anode, two-electrode full-cell electrolyzers were constructed, which showed stable operation for 100 h at a current density of 10 mA/cm². The proposed ALD electrocatalysts on planar surfaces exhibited the best performance among Ni₃S₂ materials for overall water splitting recorded to date.

Geometrically intricate sheet-on-pillar/flake hierarchy embracing cobaltosic and manganese oxides over flexible carbon scaffold for binder-free high-energy-density supercapacitor

Sheet-on-rod/flake hierarchy embracing Co₃O₄ and MnO₂ on carbon fabric is used for binder-free high-energy-density supercapacitor. Electrochemical behaviour is illuminated on the basis of shape-porosity-property correlation.

Swift tuning from spherical molybdenum microspheres to hierarchical molybdenum disulfide nanostructures by switching from solvothermal to hydrothermal synthesis route

Herein, we report the synthesis of metallic molybdenum microspheres and hierarchical MoS₂ nanostructures by facile template-free solvothermal and hydrothermal approach, respectively. The morphological transition of the Mo microspheres to hierarchical MoS₂ nanoflower architectures is observed to be accomplished with change in solvent from ethylenediamine to water. The resultant marigold flower-like MoS₂ nanostructures are few layers thick with poor crystallinity while spherical ball-like molybdenum microspheres exhibit better crystalline nature. This is the first report pertaining to the synthesis of Mo microspheres and MoS₂ nanoflowers without using any surfactant, template or substrate in hydro/solvothermal regime. It is opined that such nanoarchitectures of MoS₂ are useful candidates for energy related applications such as hydrogen evolution reaction, Li ion battery and pseudocapacitors. Inquisitively, metallic Mo can potentially act as catalyst as well as fairly economical Surface Enhanced Raman Spectroscopy (SERS) substrate in biosensor applications.

Nanostructured materials on 3D nickel foam as electrocatalysts for water splitting

Highly efficient and low-cost electrocatalysts are essential for water spitting via electrolysis in an economically viable fashion. However, the best catalytic performance is found with noble metal-based electrocatalysts, which presents a formidable obstacle for the commercial success of electrolytic water splitting-based H₂ production due to their relatively high cost and scarcity. Therefore, the development of alternative inexpensive earth-abundant electrode materials with excellent electrocatalytic properties is of great urgency. In general, efficient electrocatalysts must possess several key characteristics such as low overpotential, good electrocatalytic activity, high stability, and low production costs. Direct synthesis of nanostructured catalysts on a conducting substrate may potentially improve the performance of the resultant electrocatalysts because of their high catalytic surface areas and the synergistic effect between the electrocatalyst and the conductive substrate. In this regard, three dimensional (3D) nickel foams have been advantageously utilized as electrode substrates as they offer a large active surface area and a highly conductive continuous porous 3D network. In this review, we discuss the most recent developments in nanostructured materials directly synthesized on 3D nickel foam as potential electrode candidates for electrochemical water electrolysis, namely, the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). We also provide perspectives and outlooks for catalysts grown directly on 3D conducting substrates for future sustainable energy technologies.