CBCT analysis of the tissue thickness at immediate implant placement with contour augmentation in the maxillary anterior zone: a 1-year prospective clinical study

A preliminary investigation into the impact of soft tissue augmentation-based periodontal phenotype modification therapy for patients exhibiting class III decompensation

BACKGROUND

Patients with skeletal angle Class III malocclusion usually have inadequate hard and soft tissue volume at the mandibular anterior teeth. The labial proclination at the teeth may lead to gingival recession. The purpose of this study was to explore whether periodontal phenotype modification therapy with soft tissue augmentation (PhMT-s) can prevent gingival recession in these patients.

METHODS

Four patients with skeletal Class III malocclusion and a thin periodontal phenotype underwent surgical-orthodontic treatment. Prior to tooth movement, they underwent a minimally invasive vestibular incision with subperiosteal tunnel access combined with autogenous connective tissue grafts for periodontal phenotype modification with soft tissue augmentation (PhMT-s). The labial gingival thickness of the anterior mandibular teeth was measured at three distinct levels: at the cementoenamel junction (GT0), 3 mm apical to the CEJ (GT3), and 6 mm apical to the CEJ (GT6). These measurements were taken at baseline, three months following PhMT-s, and after tooth decompensation. Additionally, a biopsy sample was obtained from the PhMT-s site of one patient. All sections were subsequently stained using hematoxylin and eosin, Masson trichrome, Sirius Red, and immunohistochemistry.

RESULTS

The thickness of the labial gingiva was increased about 0.42 to 2.00 mm after PhMT-s. At the end of pre-orthognathic surgical orthodontic treatment, the thickness of the labial gingiva was increased about - 0.14 to 1.32 mm compared to the baseline and no gingival recession occurred after the pre-orthognathic surgical orthodontic treatment. The histologic results demonstrated that the grafts obtained from the PhMT-s site exhibited increased deposition of collagen fibers. Moreover, the proportion of type III collagen increased and the grafts displayed significantly reduced positive expression of CD31 and OCN.

CONCLUSIONS

PhMT-s increased the thickness of the soft tissue, stabilizing the gingival margin for teeth exhibiting a thin periodontal phenotype and undergoing labial movement. This is attributed to the increased deposition of collagen fibers.

Integrated correlation analysis of the thickness of buccal bone and gingiva of maxillary incisors

OBJECTIVE

This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants.

METHODOLOGY

Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters.

RESULTS

The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%).

CONCLUSION

Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

Immediate versus delayed implant placement of novel fully tapered tissue-level implants - A retrospective multicenter clinical study

OBJECTIVES

To compare the clinical and radiological outcomes of novel fully tapered tissue-level implants in immediate implant placement (type 1) versus late implant placement (type 4) for the first time.

MATERIALS AND METHODS

For this clinical study, 318 fully tapered tissue-level implants in 65 patients were inserted immediately (n = 68 implants) or late (n = 250 implants) in two different centers. Implant survival and success rates and marginal bone levels were analyzed.

RESULTS

After a mean follow-up of 12.0 ± 5 months, implant survival rates were 97.8% for all implants. No statistically significant difference in implant survival rates between type 1 and type 4 could be detected (98.5% vs 97.6%, HR 0.70, 95%-CI 0.084-5.81). Neither for implant length (HR 0.53, 95%-CI 0.055-5.08) nor for implant width (HR 0.27, CI 0.028-2.55), a significant influence on implant survival could be detected. Type of used biomaterial for filling the gap and immediate loading showed no effect on implant survival. Mean marginal bone loss was 0.02 ± 0.05 mm for type 1 and 0.04 ± 0.1 for type 4.

CONCLUSIONS

Within the limitations of this retrospective study and the short follow-up, the results demonstrated comparable high survival and success rates and stable marginal bone levels for type 1 and type 4 placement of this novel tissue-level implant (no clinical trial registration as retrospective study design).

The influence of connective tissue grafting on the reconstruction of a missing facial bone wall using immediate implant placement and simultaneous bone reconstruction: a retrospective long-term cohort study

PURPOSE

This retrospective cohort study evaluates the influence of connective tissue grafts (CTG) on bone regeneration at implant sites with total loss of the buccal bone wall treated with flapless immediate implant placement (IIP) and reconstruction with autogenous bone chips (AB) within a follow-up of up to 13 years.

METHODS

Sixty implants were inserted in 55 patients in sites with total loss of the buccal bone wall between 2008 and 2021. The implants were inserted and the buccal gaps were grafted by AB. A subgroup of 34 sites was grafted additionally with CTG using tunnel technique. Primary outcome was the vertical bone regeneration in height and thickness. Secondary outcome parameters were interproximal marginal bone level, recession, soft tissue esthetics (PES), width of keratinized mucosa (KMW) and probing depths (PPD).

RESULTS

Mean follow-up period was 60.8 months. In 55 sites a complete vertical bone regeneration was documented. The mean buccal bone level increased by 10.6 mm significantly. The thickness of the buccal bone wall ranged between 1.7 and 1.9 mm, and was significantly thicker in sites without CTG. Interproximal marginal bone level was at implant shoulder level. The mean recession improved significantly by 1.2 mm. In sites with CTG, recessions and PES improved significantly more.

CONCLUSIONS

Additional CTG in extraction sites with total buccal bone loss followed by IIP with simultaneous AB grafting led to improved PES and recession, but also to a thinner buccal bone wall compared to sites grafted just with AB.

The influence of immediate occlusal loading on micro/nano-structure of peri-implant jaw bone in rats

PURPOSE

The objective of the present study was to ascertain the effect of immediate occlusal loading after implant placement on osseointegration and the micro/nanostructure of the surrounding bone.

METHODS

After extraction of a rat maxillary right second molar, an implant was placed immediately with initial fixation (2 N< ). The implants were placed to avoid occlusal loading due to mastication, and in the loaded group, a superstructure was fabricated and subjected to occlusal loading. Bone morphometry, collagen fiber anisotropy, and biological apatite (BAp) crystallite alignment were quantitatively evaluated in both groups after extraction and fixation of the jaw bone at Days 7 and 21 after surgery.

RESULTS

Osseointegration was observed in both groups. Bone morphometry showed significant differences in bone volume, trabecular number, trabecular thickness and bone mineral density (BMD) at Days 21 postoperatively (P < 0.05). A significant difference was also found in the trabecular separation at Days 7 postoperatively (P < 0.05). In the evaluation of collagen fiber anisotropy, collagen fiber bundles running differently from the existing bone were observed in both groups. In terms of BAp crystallite alignment, a specific structure was observed in the reconstructed new bone after implantation, and preferential orientation of BAp crystallite alignment was observed in the longitudinal direction of the implants in the Day 21 postoperative loaded group.

CONCLUSION

When sufficient initial fixation is achieved at the time of dental implant placement, then the applied masticatory load may contribute to rapidly achieving not only bone volume, but also adequate bone quality after implant placement.

Immediate versus delayed implant placement in the esthetic zone: a prospective 3D volumetric assessment of peri-implant tissue stability

PURPOSE

To evaluate the volumetric stability of peri-implant soft and hard tissue prospectively, this study compared immediate versus delayed implants placed in the anterior esthetic region.

METHODS

This non-randomized controlled clinical study included 25 patients, who received an immediate (type 1) or a delayed (type 4) implant placement for the replacement of a single anterior tooth. The anterior maxillae were intraorally scanned at three timepoints: before surgery (S0), 6 months (S1), and 12 months (S2) after surgery. A specific region of interest (ROI), divided into marginal and apical regions, was determined and superimposed for volumetric changes analysis. At 6 and 12 months, the probing depth (PD), bleeding/suppuration on probing (BOP/SUP), modified plaque index (PI), keratinized mucosa (KM) width, mucosal recession (MR), and implant stability (PTV) by means of periotest were recorded.

RESULTS

Between S0-S2, tissue surrounding immediate implants was reduced in 0.37 ± 0.31 mm, whereas delayed implants gained 0.84 ± 0.57 mm mean tissue volume. Peri-implant tissue loss at type 1 implants occurred primarily in the marginal section of the ROI (0.42 ± 0.31 mm), whereas tissue gain at type 4 implants occurred mainly in the apical section (0.83 ± 0.51 mm). These values were significantly different between both groups for the entire ROI (p = 0.0452) and the marginal region (p = 0.0274). In addition, the mean buccal KM width around type 1 implants was significantly wider in comparison with the type 4 implants group after 12 months (p = 0.046). There were no significant differences between groups regarding PD, BOP/SUP, or PTV.

CONCLUSIONS

The results suggest that type 1 implants placed in the esthetic region experience more tissue loss than type 4 implants, thus marginal tissue remodeling should be considered for planning immediate implants placement in the anterior maxillae.

Immediate implant placement utilizing vestibular socket therapy versus early implant placement with contour augmentation for rehabilitation of compromised extraction sockets in the esthetic zone: A randomized controlled clinical trial

OBJECTIVE

The present randomized controlled trial compares for the first time the vestibular socket therapy (VST) to the contour augmentation technique in the management of compromised fresh extraction sockets in the maxillary esthetic zone, regarding mid-facial soft tissue changes (primary outcome), mesial and distal papillae dimensions, horizontal soft tissue changes and labial bone plate thickness at apical, middle and coronal levels (secondary outcomes) over 1-year.

MATERIALS AND METHODS

Forty participants with single nonrestorable maxillary teeth in the esthetic zone were randomized into two groups; VST (test; n = 20) utilizing vestibular access for guided bone regeneration (GBR) with immediate implant placement, or contour augmentation (control; n = 20) undergoing an initial healing period followed by implant placement with GBR through a conventional access flap.

RESULTS

All implants were successfully osseo-integrated, except for one implant in the test group. VST showed significantly less mid-facial soft tissue changes of -0.53 ± 1.17 mm versus -1.87 ± 0.69 mm in the control group (p < 0.001). Similarly, changes in mesial papilla (test = -0.64 ± 0.95 mm, control = -1.20 ± 0.81 mm), distal papilla (test = -0.56 ± 1.17 mm, control = -1.26 ± 0.63 mm), horizontal soft-tissue (test = -0.82 ± 0.95 mm, control = -1.84 ± 0.88 mm; p < 0.05) were significantly less in VST. Intra-group comparisons demonstrated a significant increase in labial bone thickness, with no differences between groups. Regression analysis revealed a significant correlation between VST as well as increased coronal bone thickness with the reduction in mid-facial soft-tissue changes.

CONCLUSION

The VST showed less soft-tissue changes and could represent an innovative technique for implant placement in the maxillary esthetic zone. Both techniques showed a high implant survival rate and increased bone thickness after 12 months.