Silicone breast implant modification review: overcoming capsular contracture

Surgical Management of Breast Capsular Contracture-A Multi-institutional Data Analysis of Risk Factors for Early Complications

BACKGROUND

Capsular contracture (CC) is a common complication following implant-based breast surgery, often requiring surgical intervention. Yet, little is known about risk factors and outcomes following CC surgery.

METHODS

We reviewed the American College of Surgeons National Surgical Quality Improvement Program database (2008-2021) to identify female patients diagnosed with CC and treated surgically. Outcomes of interest included the incidence of surgical and medical complications at 30-days, reoperations, and readmissions. Confounder-adjusted multivariable analyses were performed to establish risk factors.

RESULTS

5,057 patients with CC were identified (mean age: 55 ± 12 years and mean body mass index [BMI]: 26 ± 6 kg/m2). While 2,841 (65%) women underwent capsulectomy, capsulotomy was performed in 742 patients (15%). Implant removal and replacement were recorded in 1,160 (23%) and 315 (6.2%) cases, respectively. 319 (6.3%) patients experienced postoperative complications, with 155 (3.1%) reoperations and 99 (2.0%) readmissions. While surgical adverse events were recorded in 139 (2.7%) cases, 86 (1.7%) medical complications occurred during the 30 day follow-up. In multivariate analyses, increased BMI (OR: 1.04; p = 0.009), preoperative diagnosis of hypertension (OR: 1.48; p = 0.004), and inpatient setting (OR: 4.15; p < 0.001) were identified as risk factors of complication occurrence.

CONCLUSION

Based on 14 years of multi-institutional data, we calculated a net 30 day complication rate of 6.3% after the surgical treatment of CC. We identified higher BMI, hypertension, and inpatient setting as independent risk factors of postoperative complications. Plastic surgeons may wish to integrate these findings into their perioperative workflows, thus optimizing patient counseling and determining candidates' eligibility for CC surgery.

LEVEL OF EVIDENCE III

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Study of the Structure of Hyperbranched Polyglycerol Coatings and Their Antibiofouling and Antithrombotic Applications

While blood-contacting materials are widely deployed in medicine in vascular stents, catheters, and cannulas, devices fail in situ because of thrombosis and restenosis. Furthermore, microbial attachment and biofilm formation is not an uncommon problem for medical devices. Even incremental improvements in hemocompatible materials can provide significant benefits for patients in terms of safety and patency as well as substantial cost savings. Herein, a novel but simple strategy is described for coating a range of medical materials, that can be applied to objects of complex geometry, involving plasma-grafting of an ultrathin hyperbranched polyglycerol coating (HPG). Plasma activation creates highly reactive surface oxygen moieties that readily react with glycidol. Irrespective of the substrate, coatings are uniform and pinhole free, comprising O─C─O repeats, with HPG chains packing in a fashion that holds reversibly binding proteins at the coating surface. In vitro assays with planar test samples show that HPG prevents platelet adhesion and activation, as well as reducing (>3 log) bacterial attachment and preventing biofilm formation. Ex vivo and preclinical studies show that HPG-coated nitinol stents do not elicit thrombosis or restenosis, nor complement or neutrophil activation. Subcutaneous implantation of HPG coated disks under the skin of mice shows no evidence of toxicity nor inflammation.

Altered Foreign Body Response at the Posterior Surface Compared to the Anterior Surface of Human Silicone Breast Implants

Soft implantable devices are crucial to optimizing form and function for many patients. However, periprosthetic capsule fibrosis is one of the major challenges limiting the use of implants. Currently, little is understood about how spatial and temporal factors influence capsule physiology and how the local capsule environment affects the implant structure. In this work, we analyzed breast implant capsule specimens with staining, immunohistochemistry, and real-time polymerase chain reaction to investigate spatiotemporal differences in inflammation and fibrosis. We demonstrated that in comparison to the anterior capsule against the convex surface of breast implants, the posterior capsule against the flat surface of the breast implant displays several features of a dysregulated foreign body reaction including increased capsule thickness, abnormal extracellular remodeling, and infiltration of macrophages. Furthermore, the expression of pro-inflammatory cytokines increased in the posterior capsule across the lifespan of the device, but not in the anterior capsule. We also analyzed the surface oxidation of breast explant samples with XPS analysis. No significant differences in surface oxidation were identified either spatially or temporally. Collectively, our results support spatiotemporal heterogeneity in inflammation and fibrosis within the breast implant capsule. These findings presented here provide a more detailed picture of the complexity of the foreign body reaction surrounding implants destined for human use and could lead to key research avenues and clinical applications to treat periprosthetic fibrosis and improve device longevity.

A Comparative Analysis of Local and Systemic Immunological Biomarkers in Females With Breast Implants and Capsular Contracture

Background

The etiology of capsular contracture (CC), the most common complication following breast augmentation, remains unclear. Chronic, fibrotic inflammation resulting in excessive fibrosis has been proposed as a potential mechanism.

Objectives

In this study, we aimed to investigate the relation between biomarkers that are associated with inflammation and fibrosis and the severity of CC.

Methods

Fifty healthy females were categorized into 3 groups: females with no-to-mild CC (Baker 1-2; n = 15), females with severe CC (Baker 3-4; n = 20), and a control group awaiting breast augmentation (n = 15). We assessed 5 biomarkers (galectin-1 [Gal-1], interferon-β [INF-β], interferon-γ [INF-γ], interleukin-6 [IL-6], and tumor necrosis factor-α [TNF-α]) in breast implant capsules and serum samples.

Results

No significant differences in intracapsular cytokine levels were observed between the Baker 1-2 and the Baker 3-4 groups, as the levels were generally low and, in some cases, almost undetectable. In the blood samples, no significant differences in Gal-1, INF-γ, IL-6, or TNF-α levels were found within the 3 groups. We identified significantly increased levels of INF-β (P = .009) in the blood samples of females with severe CC, driven mainly by 3 extremely high values.

Conclusions

The cytokines assessed in this study did not reflect the degree of CC among females with silicone breast implants. However, 3 females with severe CC, who all had prolonged silicone exposure, showed extremely elevated levels of INF-β in their serum samples. This possible association between prolonged silicone exposure and systemic inflammation in some females should be further investigated.

Level of Evidence 3

Periprosthetic effusions surrounding breast expander: a flow cytometric, immunohistochemical and molecular characterization

INTRODUCTION

The synthesis of the periprosthetic capsule during implant-based breast reconstruction is the result of a coordinate cascade of inflammatory events ending in a fibrous tissue deposition around the expander or implant. Although the development of small volumes of fluid is one of the complications of prosthetic-based breast reconstruction, the characterization of the periprosthetic effusions coupled with the micro-textured devices, that have been recently introduced after the recall of macro-textured ones, is still lacking. The investigation of these periprosthetic effusions and paired capsules in terms of immunological content were the primary and secondary aims of the present study, respectively.

METHODS

For this, 68 women, 41 of whom had periprosthetic effusions at the time of expander replacement with implant, were recruited. For each case, capsule and healthy dermal tissues were taken and for women with periprosthetic effusion, peripheral blood was also collected. Periprosthetic effusions and peripheral blood were characterized by cytometry while capsules and dermal tissues by immunohistochemistry and Nanostring analysis.

RESULTS

The results showed an increase of Th1, Th2 lymphocytes and a HLA-DR+bright CD16+ cells (likely representing monocytes-derived macrophages) in periprosthetic effusions in respect to peripheral blood. These pro-inflammatory cells were counterbalanced by the gain of suppressive CD4 Treg cells. In the corresponding capsules, immunohistochemistry revealed the absence of Th1 cells and the presence of tissutal FOXP3 Treg. No significant difference in expression of inflammatory-related genes between capsules and dermal tissues was present.

CONCLUSIONS

These results suggest the presence of a Treg-controlled inflammation in both periprosthetic effusions and capsules.

Reducing Peri-implant Capsule Thickness in Submuscular Rodent Model of Breast Reconstruction With Delayed Radiotherapy

INTRODUCTION

Capsular contracture remains the most common complication following device-based breast reconstruction, occurring in up to 50% of women who also undergo adjuvant radiotherapy either before or after device-based reconstruction. While certain risk factors for capsular contracture have been identified, there remains no clinically effective method of prevention. The purpose of the present study is to determine the effect of coating the implant with the novel small molecule Met-Z2-Y12, with and without delayed, targeted radiotherapy, on capsule thickness and morphologic change around smooth silicone implants placed under the latissimus dorsi in a rodent model.

METHODS

Twenty-four female Sprague Dawley rats each had 2 mL smooth round silicone breast implants implanted bilaterally under the latissimus dorsi muscle. Twelve received uncoated implants and twelve received implants coated with Met-Z2-Y12. Half of the animals from each group received targeted radiotherapy (20 Gray) on postoperative day ten. At three and 6 months after implantation, the tissue surrounding the implants was harvested for analysis of capsular histology including capsule thickness. Additionally, microCT scans were qualitatively analyzed for morphologic change.

RESULTS

Capsules surrounding Met-Z2-Y12-coated implants were significantly thinner (P = 0.006). The greatest difference in capsule thickness was seen in the irradiated 6-month groups, where mean capsule thickness was 79.1 ± 27.3 μm for uncoated versus 50.9 ± 9.6 μm for Met-Z2-Y12-coated implants (P = 0.038). At the time of explant, there were no capsular morphologic differences between the groups either grossly or per microCT.

CONCLUSIONS

Met-Z2-Y12 coating of smooth silicone breast implants significantly reduces capsule thickness in a rodent model of submuscular breast reconstruction with delayed radiotherapy.

Implant-based breast surgery and capsular formation: when, how and why?-a narrative review

Background and Objective

Implant-based breast surgery is a common procedure for both reconstructive and aesthetic purposes. Breast implants, like any foreign object, trigger the formation of a capsule around them. While generally harmless, the capsule can undergo fibrotic changes leading to capsular contracture, which can negatively impact surgical outcomes and patient well-being. Additionally, rare but serious complications, such as breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) and capsule-associated squamous cell carcinoma, have been reported. This paper aims to review the physiology of capsular formation, identify factors contributing to capsule-related pathologies, and discuss their clinical implications.

Methods

A review of relevant literature was conducted by searching databases for articles published between inception and September 2022. The search included but not limited to terms such as "capsular formation" and "capsular contracture". Selected articles were critically analyzed to address the objectives of this review.

Key Content and Findings

Capsular formation involves interactions between the implant surface, surrounding tissues, and the immune system. Factors influencing pathological changes in the capsule include genetic predisposition, bacterial contamination, implant characteristics, and surgical techniques. Capsular contracture, characterized by tissue hardening, pain, and implant distortion, remains the most common complication. Rare but life-threatening conditions, such as BIA-ALCL and capsule-associated squamous cell carcinoma, necessitate vigilant monitoring and early detection.

Conclusions

Understanding the physiology of capsular formation and its associated pathologies is crucial for healthcare providers involved in implant-based breast surgery. Efforts should focus on minimizing the risk of capsular contracture through improved implant materials, surgical techniques, and infection prevention. The emergence of BIA-ALCL and capsule-associated squamous cell carcinoma underscores the importance of long-term surveillance and prompt diagnosis. Further research is needed to uncover underlying mechanisms and develop preventive measures and treatments for these complications. Enhancing our knowledge and clinical management of capsular formation will lead to safer and more successful outcomes in implant-based breast surgery.

What Can We Learn from Breast Implant Explantation: a 28-Year, Multicenter Retrospective Study of 1004 Explantation Cases

BACKGROUND

Implant-based breast augmentation remains popular, but the controversy over the safety and longevity of implants has continued. An event-based analysis of reasons for implant explantation may provide us with some insight into the controversy.

METHODS

Data from May 1994 to October 2022 of explantation cases from aesthetic breast augmentation in three medical centers were retrospectively reviewed. Patient characteristics, time to explantation, reasons for visit, the major reason for explantation and intraoperative findings were analyzed.

RESULTS

A total of 522 patients with 1004 breasts were included in our study. Objective explantation reasons accounted for 34.0% in primary augmentation breasts and 47.6% in revision augmentation breasts, which were significantly different (p = 0.006). The most common complaint was dissatisfaction with breast appearance, followed by concerns about implant safety, poor hand feeling and pain. 43.5% of the implants worn for more than 10 years were removed for objective reasons, which was found significantly different with the proportion of objective reasons in implants removed within 1 year and 1-5 years postoperatively (p < 0.008).

CONCLUSION

The proportion of different reasons for implant explantation varies across the times of surgeries and the years that the implant had been worn. As the years of implant wearing increase, the proportion of subjective reasons decreases in implant removal cases and objective reasons increase among them.

LEVEL OF EVIDENCE III

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Functionalization of breast implants by cyclodextrin in-situ polymerization: a local drug delivery system for augmentation mammaplasty

Mammaplasty is a widely performed surgical procedure worldwide, utilized for breast reconstruction, in the context of breast cancer treatment, and aesthetic purposes. To enhance post-operative outcomes and reduce risks (hematoma with required evacuation, capsular contracture, implant-associated infection and others), the controlled release of medicaments can be achieved using drug delivery systems based on cyclodextrins (CDs). In this study, our objective was to functionalize commercially available silicone breast implants with smooth and textured surfaces through in-situ polymerization of two CDs: β-CD/citric acid and 2-hydroxypropyl-β-CD/citric acid. This functionalization serves as a local drug delivery system for the controlled release of therapeutic molecules that potentially can be a preventive treatment for post-operative complications in mammaplasty interventions. Initially, we evaluated the pre-treatment of sample surfaces with O2 plasma, followed by chitosan grafting. Subsequently, in-situ polymerization using both types of CDs was performed on implants. The results demonstrated that the proposed pre-treatment significantly increased the polymerization yield. The functionalized samples were characterized using microscopic and physicochemical techniques. To evaluate the efficacy of the proposed system for controlled drug delivery in augmentation mammaplasty, three different molecules were utilized: pirfenidone (PFD) for capsular contracture prevention, Rose Bengal (RB) as anticancer agent, and KR-12 peptide (KR-12) to prevent bacterial infection. The release kinetics of PFD, RB, and KR-12 were analyzed using the Korsmeyer-Peppas and monolithic solution mathematical models to identify the respective delivery mechanisms. The antibacterial effect of KR-12 was assessed against Staphylococcus epidermidis and Pseudomonas aeruginosa, revealing that the antibacterial rate of functionalized samples loaded with KR-12 was dependent on the diffusion coefficients. Finally, due to the immunomodulatory properties of KR-12 peptide on epithelial cells, this type of cells was employed to investigate the cytotoxicity of the functionalized samples. These assays confirmed the superior properties of functionalized samples compared to unprotected implants.

Polyetheretherketone (PEEK) as a Potential Material for the Repair of Maxillofacial Defect Compared with E-poly(tetrafluoroethylene) (e-PTFE) and Silicone

Silicone and e-poly(tetrafluoroethylene) (e-PTFE) are the most commonly used artificial materials for repairing maxillofacial bone defects caused by facial trauma and tumors. However, their use is limited by poor histocompatibility, unsatisfactory support, and high infection rates. Polyetheretherketone (PEEK) has excellent mechanical strength and biocompatibility, but its application to the repair of maxillofacial bone defects lacks a theoretical basis. The microstructure and mechanical properties of e-PTFE, silicone, and PEEK were evaluated by electron microscopy, BOSE machine, and Fourier transformed infrared spectroscopy. Mouse fibroblast L929 cells were incubated on the surface of the three materials to assess cytotoxicity and adhesion. The three materials were implanted onto the left femoral surface of 90 male mice, and samples of the implants and surrounding soft tissues were evaluated histologically at 1, 2, 4, 8, and 12 weeks post-surgery. PEEK had a much higher Young's modulus than either e-PTFE or silicone (p < 0.05 each), and maintained high stiffness without degradation long after implantation. Both PEEK and e-PTFE facilitated L929 cell adhesion, with PEEK having lower cytotoxicity than e-PTFE and silicone (p < 0.05 each). All three materials similarly hindered the motor function of mice 12 weeks after implantation (p > 0.05 each). Connective tissue ingrowth was observed in PEEK and e-PTFE, whereas a fibrotic peri-prosthetic capsule was observed on the surface of silicone. The postoperative infection rate was significantly lower for both PEEK and silicone than for e-PTFE (p < 0.05 each). PEEK shows excellent biocompatibility and mechanical stability, suggesting that it can be effective as a novel implant to repair maxillofacial bone defects.

An Evaluation of Native Breast Dimension and Tissue Expander Inflation Rate on the Risk of Capsular Contracture Development in Postmastectomy Reconstruction

INTRODUCTION

Capsular contracture is a common complication after 2-stage breast reconstruction. The relationships between native breast size, the rate of tissue expander expansion, and capsule formation have not been elucidated. This study aims to evaluate how these factors contribute to capsular contracture and establish cutoff values for increased risk.

METHODS

A data set consisting of 229 patients who underwent 2-stage breast reconstruction between 2012 and 2021 was included in the study. The rate of expansion is estimated as the final expanded volume subtracted by the initial filling volume of the tissue expander over time elapsed. The native breast size was estimated using various preoperative breast measurements and the weight of mastectomy specimen (grams). Further stratified analysis evaluated patients separately based on postoperative radiation status.

RESULTS

Greater nipple-inframammary fold distance and faster tissue expander enlargement rate conferred decreased odds of developing capsular contracture ( P < 0.05). On stratified analysis, faster tissue expansion rate was not significant in the nonradiated cohort but remained a significant negative predictor in the radiation group (odds ratio, 0.996; P < 0.05). Cut-point analysis showed an expansion rate of <240 mL/mo and a nipple-inframammary fold value of <10.5 cm as conferring a greater risk of capsular contracture.

CONCLUSION

Smaller inframammary fold distance may be associated with a higher risk of capsular contracture. Slower expansion rates correlate with increased odds of contracture in patients undergoing adjuvant radiation. Breast geometry should be considered when risk stratifying various reconstruction approaches (implant vs autologous). In addition, longer delays between implant exchange and initial tissue expansion should be avoided if clinically feasible.

Body-Shaping Membrane to Regenerate Breast Fat by Elastic Structural Holding

Tissue regeneration requires structural holding and movement support using tissue-type-specific aids such as bone casts, skin bandages, and joint protectors. Currently, an unmet need exists in aiding breast fat regeneration as the breast moves following continuous body motion by exposing the breast fat to dynamic stresses. Here, the concept of elastic structural holding is applied to develop a shape-fitting moldable membrane for breast fat regeneration ("adipoconductive") after surgical defects are made. The membrane has the following key characteristics: (a) It contains a panel of honeycomb structures, thereby efficiently handling motion stress through the entire membrane; (b) a strut is added into each honeycomb in a direction perpendicular to gravity, thereby suppressing the deformation and stress concentration upon lying and standing; and (c) thermo-responsive moldable elastomers are used to support structural holding by suppressing large deviations of movement that occur sporadically. The elastomer became moldable upon a temperature shift above T_m. The structure can then be fixed as the temperature decreases. As a result, the membrane promotes adipogenesis by activating mechanotransduction in a fat miniature model with pre-adipocyte spheroids under continuous shaking in vitro and in a subcutaneous implant placed on the motion-prone back areas of rodents in vivo.

A multi-targeting bionanomatrix coating to reduce capsular contracture development on silicone implants

BACKGROUND

Capsular contracture is a critical complication of silicone implantation caused by fibrotic tissue formation from excessive foreign body responses. Various approaches have been applied, but targeting the mechanisms of capsule formation has not been completely solved. Myofibroblast differentiation through the transforming growth factor beta (TGF-β)/p-SMADs signaling is one of the key factors for capsular contracture development. In addition, biofilm formation on implants may result chronic inflammation promoting capsular fibrosis formation with subsequent contraction. To date, there have been no approaches targeting multi-facted mechanisms of capsular contracture development.

METHODS

In this study, we developed a multi-targeting nitric oxide (NO) releasing bionanomatrix coating to reduce capsular contracture formation by targeting myofibroblast differentiation, inflammatory responses, and infections. First, we characterized the bionanomatrix coating on silicon implants by conducting rheology test, scanning electron microcsopy analysis, nanoindentation analysis, and NO release kinetics evaluation. In addition, differentiated monocyte adhesion and S. epidermidis biofilm formation on bionanomatrix coated silicone implants were evaluated in vitro. Bionanomatrix coated silicone and uncoated silicone groups were subcutaneously implanted into a mouse model for evaluation of capsular contracture development for a month. Fibrosis formation, capsule thickness, TGF-β/SMAD 2/3 signaling cascade, NO production, and inflammatory cytokine production were evaluated using histology, immunofluorescent imaging analysis, and gene and protein expression assays.

RESULTS

The bionanomatrix coating maintained a uniform and smooth surface on the silicone even after mechanical stress conditions. In addition, the bionanomatrix coating showed sustained NO release for at least one month and reduction of differentiated monocyte adhesion and S. epidermidis biofilm formation on the silicone implants in vitro. In in vivo implantation studies, the bionanomatrix coated groups demonstrated significant reduction of capsule thickness surrounding the implants. This result was due to a decrease of myofibroblast differentiation and fibrous extracellular matrix production through inhibition of the TGF-β/p-SMADs signaling. Also, the bionanomatrix coated groups reduced gene expression of M1 macrophage markers and promoted M2 macrophage markers which indicated the bionanomatrix could reduce inflammation but promote healing process.

CONCLUSIONS

In conclusion, the bionanomatrix coating significantly reduced capsular contracture formation and promoted healing process on silicone implants by reducing myfibroblast differentiation, fibrotic tissue formation, and inflammation. A multi-targeting nitric oxide releasing bionanomatrix coating for silicone implant can reduce capsular contracture and improve healing process. The bionanomatrix coating reduces capsule thickness, α-smooth muscle actin and collagen synthesis, and myofibroblast differentiation through inhibition of TGF-β/SMADs signaling cascades in the subcutaneous mouse models for a month.

Complication Rates after Breast Surgery with the Motiva Smooth Silk Surface Silicone Gel Implants-A Systematic Review and Meta-Analysis

BACKGROUND

In an era where textured devices are being phased out due to concerns about BIA-ALCL, the Motiva SilkSurface breast implants intend to alleviate historical prosthesis-related complications. However, its safety and feasibility remain unelucidated.

METHODS

An analysis of Pubmed, Web of Science, Ovid, and Embase databases was performed. A total of 114 studies were identified initially, and 13 of these met the inclusion criteria and were assessed regarding postoperative parameters such as complication rate or follow-up period.

RESULTS

In 4784 patients who underwent breast augmentation with Motiva SilkSurface breast implants, a total of 250 (5.2%) complications were observed. Short- and medium-term complication rates ranged from 2.8-14.4% and 0.32-16.67%, respectively. The most common complication was early seroma (n = 52, overall incidence = 1.08%), followed by early hematoma (n = 28, overall incidence = 0.54%). The incidence of capsule contracture was 0.54% and breast implant-associated-anaplastic large cell lymphoma was not observed.

DISCUSSION

Although the majority of the studies in the current literature suggest the distinction of the Motiva SilkSurface breast implants in terms of postoperative complications and capsular contracture, its safety and feasibility need to be further elucidated with well-designed, large-scale, multicenter, prospective case-control studies. Other: No funding was received.

Is It All about Surface Topography? An Intra-Individual Clinical Outcome Analysis of Two Different Implant Surfaces in Breast Reconstruction

The most common long-term complication of silicone breast implants (SMI) remains capsular fibrosis. The etiology of this exaggerated implant encapsulation is multifactorial but primarily induced by the host response towards the foreign material silicone. Identified risk factors include specific implant topographies. Of note, breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) has only been observed in response to textured surface implants. We hypothesize that reduction of SMI surface roughness causes less host response and, hence, better cosmetic outcomes with fewer complications for the patient. A total of 7 patients received the routinely used CPX^®4 breast expander (~60 µM Ra) and the novel SmoothSilk^® (~4 µM Ra), fixed prepectoral with a titanized mesh pocket and randomized to the left or right breast after bilateral prophylactic NSME (nipple-sparing mastectomy). We aimed to compare the postoperative outcome regarding capsule thickness, seroma formation, rippling, implant dislocation as well as comfortability and practicability. Our analysis shows that surface roughness is an influential parameter in controlling fibrotic implant encapsulation. Compared intra-individually for the first time in patients, our data confirm an improved biocompatibility with minor capsule formation around SmoothSilk^® implants with an average shell roughness of 4 µM and in addition an amplification of host response by titanized implant pockets.

Quantitative Proteomic Characterization of Foreign Body Response towards Silicone Breast Implants Identifies Chronological Disease-Relevant Biomarker Dynamics

The etiology of exaggerated fibrous capsule formation around silicone mammary implants (SMI) is multifactorial but primarily induced by immune mechanisms towards the foreign material silicone. The aim of this work was to understand the disease progression from implant insertion and immediate tissue damage response reflected in (a) the acute wound proteome and (b) the adsorption of chronic inflammatory wound proteins at implant surfaces. An intraindividual relative quantitation TMT-liquid chromatography-tandem mass spectrometry approach was applied to the profile wound proteome formed around SMI in the first five days post-implantation. Compared to plasma, the acute wound profile resembled a more complex composition comprising plasma-derived and locally differentially expressed proteins (DEPs). DEPs were subjected to a functional enrichment analysis, which revealed the dysregulation of signaling pathways mainly involved in immediate inflammation response and ECM turnover. Moreover, we found time-course variations in protein enrichment immediately post-implantation, which were adsorbed to SMI surfaces after 6-8 months. Characterization of the expander-adhesive proteome by a label-free approach uncovered a long-term adsorbed acute wound and the fibrosis-associated proteome. Our findings propose a wound biomarker panel for the early detection and diagnosis of excessive fibrosis that could potentially broaden insights into the characteristics of fibrotic implant encapsulation.

Vascular endothelial growth factor attenuates neointimal hyperplasia of decellularized small-diameter vascular grafts by modulating the local inflammatory response

Small-diameter vascular grafts (diameter <6 mm) are in high demand in clinical practice. Neointimal hyperplasia, a common complication after implantation of small-diameter vascular grafts, is one of the common causes of graft failure. Modulation of local inflammatory responses is a promising strategy to attenuates neointimal hyperplasia. Vascular endothelial growth factor (VEGF) is an angiogenesis stimulator that also induces macrophage polarization and modulates inflammatory responses. In the present study, we evaluated the effect of VEGF on the neointima hyperplasia and local inflammatory responses of decellularized vascular grafts. In the presence of rhVEGF-165 in RAW264.6 macrophage culture, rhVEGF-165 induces RAW264.6 macrophage polarization to M2 phenotype. Decellularized bovine internal mammary arteries were implanted into the subcutaneous and infrarenal abdominal aorta of New Zealand rabbits, with rhVEGF-165 applied locally to the adventitial of the grafts. The vascular grafts were removed en-bloc and submitted to histological and immunofluorescence analyses on days 7 and 28 following implantation. The thickness of the fibrous capsule and neointima was thinner in the VEGF group than that in the control group. In the immunofluorescence analysis, the number of M2 macrophages and the ratio of M2/M1 macrophages in vascular grafts in the VEGF group were higher than those in the control group, and the proinflammatory factor IL-1 was expressed less than in the control group, but the anti-inflammatory factor IL-10 was expressed more. In conclusion, local VEGF administration attenuates neointimal hyperplasia in decellularized small-diameter vascular grafts by inducing macrophage M2 polarization and modulating the inflammatory response.

Tamoxifen reduces silicone implant capsule formation in a mouse model

Capsular contracture as a result of the foreign body response (FBR) is a common issue after implant-based breast reconstruction, affecting up to 20% of patients. New evidence suggests that tamoxifen may mitigate the FBR. C57BL/6 female mice were treated with daily tamoxifen or control injections and implanted with bilateral silicone implants in the submammary glandular plane. Implants were removed en bloc after 2 weeks and the implant capsules were evaluated histologically. Tamoxifen treatment decreased capsule thickness, decreased the number of αSMA+ cells (477 ± 156 cells/mm control vs 295 ± 121 cells/mm tamoxifen, p = 0.005 unpaired t test), and decreased CD31+ cells (173.9 ± 96.1 cells/mm2 control vs 106.3 ± 51.8 cells/mm2 tamoxifen, p = 0.043 unpaired t test). There were similar amounts of pro- and anti-inflammatory macrophages (iNOS 336.1 ± 226.3 cells/mm control vs 290.6 ± 104.2 cells/mm tamoxifen, p > 0.999 Mann-Whitney test and CD163 136.6 ± 76.4 cells/mm control vs 94.1 ± 45.9 cells/mm tamoxifen, p = 0.108 unpaired t test). Tamoxifen treatment in the mouse silicone breast implant model decreased capsule formation through modulation of myofibroblasts, neovascularization, and collagen deposition. Tamoxifen may be useful for reducing or preventing capsule formation in clinical breast implantations.

Pharmacological Approaches for the Prevention of Breast Implant Capsular Contracture

Capsular contracture is a common complication associated with breast implants following reconstructive or aesthetic surgery in which a tight or constricting scar tissue capsule forms around the implant, often distorting the breast shape and resulting in chronic pain. Capsulectomy (involving full removal of the capsule surrounding the implant) and capsulotomy (where the capsule is released and/or partly removed to create more space for the implant) are the most common surgical procedures used to treat capsular contracture. Various structural modifications of the implant device (including use of textured implants, submuscular placement of the implant, and the use of polyurethane-coated implants) and surgical strategies (including pre-operative skin washing and irrigation of the implant pocket with antibiotics) have been and/or are currently used to help reduce the incidence of capsular contracture. In this article, we review the pharmacological approaches-both commonly practiced in the clinic and experimental-reported in the scientific and clinical literature aimed at either preventing or treating capsular contracture, including (i) pre- and post-operative intravenous administration of drug substances, (ii) systemic (usually oral) administration of drugs before and after surgery, (iii) modification of the implant surface with grafted drug substances, (iv) irrigation of the implant or peri-implant tissue with drugs prior to implantation, and (v) incorporation of drugs into the implant shell or filler prior to surgery followed by drug release in situ after implantation.

Impact on capsule formation for three different types of implant surface tomography

Although capsular contracture remains one of the major problems following silicone breast implantation, the associated mechanism has yet to be determined. This study thus aimed to investigate capsule formation and capsular contracture using three types of implants with different surface topographies in vivo. Three types of implants (i.e., smooth, macrotexture, and nanotexture) with different surface topographies were inserted in a total of 48 Wistar rats. After 4 and 12 weeks, the samples were analyzed via histological, immunohistochemical, and Western blot examination. To identify implant movement, the degree to which implant position changed was measured. And the surface topography was characterized using scanning electron microscopy. Hematoxylin–eosin staining showed that the nanotexture type implant promoted significant decreases in capsule thickness at 12 weeks (P < 0.05), while Masson trichrome staining showed decreased collagen fiber density with the same implant type. Immunohistochemical and Western blot examination revealed reduced fibrosis markers (myofibroblast, and transforming growth factor beta-1) in the nanotexture surface implant. Meanwhile, implant location evaluation found that the nanotexture and smooth surface implants had significantly increased movement (P < 0.05). The nanotexture surface implant had been found to reduce capsule formation given that it minimizes the effects of factors related to foreign body reaction.

Asiaticoside Combined With Carbon Ion Implantation to Improve the Biocompatibility of Silicone Rubber and to Reduce the Risk of Capsule Contracture

Capsular contracture caused by silicone rubber is a critical issue in plastic surgery that urgently needs to be solved. Studies have shown that carbon ion implant in silicone rubber (carbon silicone rubber, C-SR) can significantly improve the capsular structure, but the effect of this improvement only appear 2months or later. In this study, asiaticoside combined with carbon silicone rubber was used to explore the changes in the capsule to provide a reference for the treatment of capsule contracture. Human fibroblasts (HFF-1) were used for in vitro experiments. The combined effect of asiaticoside and carbon silicone rubber on cell proliferation was determined by the CCK8 method, cell migration changes were measured by Transwell assays, cell cycle changes were measured by flow cytometry, and the expression levels of fibroblast transformation markers (vimentin and α-SMA), collagen (Col-1A1) and TGF-β/Smad signaling pathway-related proteins (TGF-β1, TβRI, TβRII and Smad2/3) were detected by immunofluorescence. In vivo experiments were carried out by subcutaneous implantation of the material in SD rats, and asiaticoside was oral administered simultaneously. WB and ELISA were used to detect changes in the expression of TGF-β/Smad signaling pathway-related proteins. TGF-β/Smad signaling pathway proteins were then detected and confirmed by HE, Masson and immunohistochemical staining. The results shown that asiaticoside combined with carbon ion implantation inhibited the viability, proliferation and migration of fibroblasts on silicone rubber. In vitro immunofluorescence showed that the secretion levels of α-SMA and Col-1A1 were significantly decreased, the transformation of fibroblasts into myofibroblasts was weakened, and the TGF-β/Smad signaling pathway was inhibited. In vivo experimental results showed that asiaticoside combined with carbon silicone rubber inhibited TGF-β1 secretion and inhibited the TGF-β/Smad signaling pathway, reducing the thickness of the capsule and collagen deposition. These results imply that carbon silicone rubber combined with asiaticoside can regulate the viability, proliferation and migration of fibroblasts by inhibiting the TGF-β/Smad signaling pathway and reduce capsule thickness and collagen deposition, which greatly reduces the incidence of capsule contracture.

Treatment and Prevention of Periprosthetic Capsular Contracture in Breast Surgery With Prosthesis Using Leukotriene Receptor Antagonists: A Meta-Analysis

BACKGROUND

Capsular contracture (CC) is the most common long-term complication of breast surgery with prosthesis. Leukotriene receptor antagonists (LRAs) have been tested as a potential treatment; however, mixed results have been observed.

OBJECTIVES

The aim of this study was to undertake a meta-analysis to clarify the treatment and prophylactic capabilities of LRAs in the management of CC.

METHODS

A systematic literature search of the most popular English-language databases was performed to identify relevant primary publications. We included all studies that used the Baker scale to evaluate the treatment and preventive capabilities of LRAs.

RESULTS

Six eligible studies were included based on predefined inclusion and exclusion criteria, totalling 2276 breasts, of which 775 did not receive LRAs and 1501 did. Final pooled results showed that LRAs could help manage CC with a risk difference (RD) of -0.38 with a corresponding 95% CI of -0.69 to -0.08, showing statistical significance at a Z value of 2.48, P = 0.01. Subgroup analysis based on the type of drug showed that only montelukast yielded statistical significance (RD = -0.27, 95% CI = -0.51 to -0.03, Z = 2.20, P = 0.03). Zafirlukast did not seem to influence CC. Further subgroup analysis based on treatment timing showed that prophylaxis was ineffective and only treatment for ongoing CC yielded statistically significant improvements.

CONCLUSIONS

The current meta-analysis proved that LRAs could be used in the management of CC. Only treatment for ongoing CC showed statistically significant improvements. Montelukast seemed to be more efficient with a safer profile for adverse effects, whereas zafirlukast yielded no statistically significant results.

LEVEL OF EVIDENCE: 4

Identification of damage associated molecular patterns and extracellular matrix proteins as major constituents of the surface proteome of lung implantable silicone/nitinol devices

Lung implantable devices have been widely adopted as mechanical interventions for a wide variety of pulmonary pathologies. Despite successful initial treatment, long-term efficacy can often be impacted by fibrotic or granulation tissue formation at the implant sites. This study aimed to explore the lung-device interface by identifying the adhered proteome on lung devices explanted from patients with severe emphysema. In this study, scanning electron microscopy is used to visualize the adhesion of cells and proteins to silicone and nitinol surfaces of explanted endobronchial valves. By applying high-resolution mass-spectrometry, the surface proteome of eight explanted valves is characterized, identifying 263 unique protein species to be mutually adsorbed on the valves. This subset is subjected to gene enrichment analysis, matched with known databases and further validated using immunohistochemistry. Enrichment analyses reveal dominant clusters of functionally-related ontology terms associated with coagulation, pattern recognition receptor signaling, immune responses, cytoskeleton organization, cell adhesion and migration. Matching results show that extracellular matrix proteins and damage-associated molecular patterns are cardinal in the formation of the surface proteome. This is the first study investigating the composition of the adhered proteome on explanted lung devices, setting the groundwork for hypothesis generation and further exploration. STATEMENT OF SIGNIFICANCE: This is the first study investigating the composition of the adhered proteome on explanted lung devices. Lung implantable devices have been widely adopted as mechanical interventions for pulmonary pathologies. Despite successful initial treatment, long-term efficacy can often be impacted by fibrotic or granulation tissue formation around the implant sites. We identified the adhered proteome on explanted lung devices using several techniques. We identified 263 unique protein species to be mutually adsorbed on explanted lung devices. Pathway analyses revealed that these proteins are associated with coagulation, pattern recognition receptor signaling, immune responses, cytoskeleton organization, cell adhesion and migration. Furthermore, we identified that especially extracellular matrix proteins and damage-associated molecular patterns were cardinal in the formation of the surface proteome.

HISTORY OF BREAST IMPLANTS: BACK TO THE FUTURE

Modern breast implants are a staple of plastic surgery, finding uses in esthetic and reconstructive procedures. Their history began in the 1960s, with the first generation of smooth devices with thick silicone elastomer, thick silicone gel, and Dacron patches on the back. They presented hard consistency, high capsular contracture rates and the patches increased the risk of rupture. In the same decade, polyurethane coating of implants was implemented. A second generation was introduced in the 1970s with a thinner shell, less viscous gel filler and no patches, but increased silicone bleed-through and rupture rates. The third generation, in the early 1980s, featured implants with a thicker multilayered elastomer shell reinforced with silica to reduce rupture risk and prevent silicone bleed-through. A fourth generation from the late 1980s combined thick outer elastomer shells, more cohesive gel filler, and implemented for the first-time outer shell texturing. In the early 1990s, the fifth generation of devices pioneered an anatomical shape with highly cohesive form-stable gel filler and a rough outer shell surface. Surface texturing was hampered by the discovery of Breast Implant Associated-Anaplastic Large Cell Lymphoma and its link with textured devices. From the 2010s, we have the era of the sixth generation of implants, featuring innovations regarding the surface, with biomimetic surfaces, more resistant shells and variations in gel consistency. The road to innovation comprises setbacks such as the FDA moratorium in 1992, the PIP scandal, the Silimed CE mark temporary suspension and the FDA-requested voluntary recall of the Allergan BIOCELL implants.

Effect of Microgroove Structure in PDMS-Based Silicone Implants on Biocompatibility

Capsule and capsule contracture around implants are important concerns in a clinic. The physical topology of the material surface regulates the formation of the capsule, but the specific regulatory mechanism is unclear. In this study, four types of silicone implant materials with different microgroove structures (groove depths of 10 and 50 μm and widths of 50 and 200 μm) were constructed using lithography to form different gradient surface topologies. Mass spectrometry, Cell Counting Kit-8, 5-ethynyl-2′-deoxycytidine (EdU), enzyme-linked immunosorbent assay, western blot, immunofluorescence, and immunohistochemistry were used to explore the changes in protein adsorption, cell adhesion, cell proliferation, and collagen deposition on the surface of the materials. At the same time, RNA-seq was used to detect transcriptome differences caused by different structures. Furthermore, collagen deposition and capsule formation were observed in the rats. The groove structure was observed to significantly increase the surface roughness of the material. The deeper groove and the narrower width of the polydimethylsiloxane would increase the surface roughness of the material and the surface water contact angle but reduce the total amount of adsorbed protein in the first two hours. In vitro cell experiments revealed that microtopology affected cell proliferation and adhesion and regulated collagen secretion. Further analysis indicated the deeper and narrower groove (group 50–50) on the surface of the material caused more evident collagen deposition around the material, forming a thicker envelope. Surface roughness of the material was thus related to collagen deposition and envelope thickness. The thickness of the envelope tissue around smooth materials does not exceed that of the materials with surface roughness. In conclusion, the narrower and deeper grooves in the micron range exhibited poor histocompatibility and led to formation of thicker envelopes around the materials. The appropriate grooves can reduce envelope thickness.

Assessment of human adipose-derived stem cell on surface-modified silicone implant to reduce capsular contracture formation

Medical devices made from poly(dimethylsiloxane) (PDMS)-based silicone implants have been broadly used owing to their inert properties, biocompatibility, and low toxicity. However, long-term implantation is usually associated with complications, such as capsular contracture due to excessive local inflammatory response, subsequently requiring implant removal. Therefore, modification of the silicone surface to reduce a risk of capsular contracture has attracted increasing attention. Human adipose-derived stem cells (hASCs) are known to provide potentially therapeutic applications for tissue engineering, regenerative medicine, and reconstructive surgery. Herein, hASCs coating on a PDMS (hASC-PDMS) or itaconic acid (IA)-conjugated PDMS (hASC-IA-PDMS) surface is examined to determine its biocompatibility for reducing capsular contracture on the PDMS surface. In vitro cell cytotoxicity evaluation showed that hASCs on IA-PDMS exhibit higher cell viability than hASCs on PDMS. A lower release of proinflammatory cytokines is observed in hASC-PDMS and hASC-IA-PDMS compared to the cells on plate. Multiple factors, including in vivo mRNA expression levels of cytokines related to fibrosis; number of inflammatory cells; number of macrophages and myofibroblasts; capsule thickness; and collagen density following implantation in rats for 60 days, indicate that incorporated coating hASCs on PDMSs most effectively reduces capsular contracture. This study demonstrates the potential of hASCs coating for the modification of PDMS surfaces in enhancing surface biocompatibility for reducing capsular contracture of PDMS-based medical devices.

Comparing the Antimicrobial Effect of Silver Ion-Coated Silicone and Gentamicin-Irrigated Silicone Sheets from Breast Implant Material

BACKGROUND

Post-operative infection is a significant complication of breast implant surgery that may require extensive use of antibiotics and surgical interventions. Here, we developed a biomaterial coating that is chemically bonded to silicone implants which delivers antimicrobial ions over time.

METHODS

After coating the silicone implants with a "mediator" polymer (γ-PGA), the implants were impregnated with silver (Ag) ions. Antimicrobial effects of these implants were assayed with modified Kirby-Bauer disk diffusion method. The silicone disks were transferred to a plate with fresh bacteria. Control was intended to simulate an intra-operative wash.

RESULTS

The Ag-γ-PGA coated silicone demonstrated antimicrobial effects against the most common etiological agents of breast implant infections, including Pseudomonas aeruginosa, Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Klebsiella pneumoniae. There was no effect of inhibition of bacterial growth around the control silicone or the silicone coated only with γ-PGA. The zone of inhibition was generally larger around the Ag-γ-PGA coated silicone as compared to the silicone irrigated with gentamicin, and continued antibacterial effect was also observed at 48 hours in the Ag-γ-PGA coated silicone for all bacteria groups with the exception of P. aeruginosa. Gentamicin-irrigated silicone did not inhibit bacterial growth at 48 hours.

CONCLUSION

The observed antibacterial performance of the Ag-γ-PGA coating as compared to simulated intra-operative antibiotic wash is promising and should be further evaluated to develop the next generation of implants with diminished risk for post-operative implant infections.

Suppression of the fibrotic encapsulation of silicone implants by inhibiting the mechanical activation of pro-fibrotic TGF-β

The fibrotic encapsulation of implants involves the mechanical activation of myofibroblasts and of pro-fibrotic transforming growth factor beta 1 (TGF-β1). Here, we show that both softening of the implant surfaces and inhibition of the activation of TGF-β1 reduce the fibrotic encapsulation of subcutaneous silicone implants in mice. Conventionally stiff silicones (elastic modulus, ~2 MPa) coated with a soft silicone layer (elastic modulus, ~2 kPa) reduced collagen deposition as well as myofibroblast activation without affecting the numbers of macrophages and their polarization states. Instead, fibroblasts around stiff implants exhibited enhanced intracellular stress, increased the recruitment of α_v and β₁ integrins, and activated TGF-β1 signalling. In vitro, the recruitment of α_v integrin to focal adhesions and the activation of β₁ integrin and of TGF-β were higher in myofibroblasts grown on latency-associated peptide (LAP)-coated stiff silicones than on soft silicones. Antagonizing α_v integrin binding to LAP through the small-molecule inhibitor CWHM-12 suppressed active TGF-β signalling, myofibroblast activation and the fibrotic encapsulation of stiff subcutaneous implants in mice.

Effects of Oral Zafirlukast, Sildenafil, or Pirfenidone on the Formation of Postsurgical Intra-abdominal Adhesions in an Experimental Rat Model

INTRODUCTION

Intra-abdominal adhesions' main etiology is surgical procedures that commonly require reintervention. Oral treatments with Sildenafil, Zafirlukast, and Pirfenidone have yielded decreased severity of fibrotic phenomena secondary to the introduction of foreign material. This study aimed to evaluate the efficacy of oral Zafirlukast, Sildenafil or Pirfenidone treatment on reducing or preventing intra-abdominal adhesions in an experimental rat model.

METHODS

Four groups, each of 10 male Wistar rats weighing 250-300 g, were used. A midline laparotomy was used to excise an area of 1.5´1.5cm and reconstructed with polypropylene mesh fixed to the abdominal wall. After 12 h, oral doses of Zafirlukast (1.25 mg/kg, group B), Sildenafil (15 mg/kg, group C), or Pirfenidone (500 mg/kg, group D) were given every day for eight days. The control group, A, received no treatment. At day nine, animals were reoperated. The implant was resected after ethically approved euthanasia and specimens were fixed in 10% formaldehyde for histopathology.

RESULTS

Control group A yielded adhesions with greater fibrovascular density and neighboring organ involvement than the other groups (P = 0.001), as well as intense inflammatory infiltrates and numerous granulomas (P = 0.04). Adhesions in group C had less fibrovascular density (P = 0.03) with decreased serosal injuries (P = 0.001) and less organ involvement. Group D had reduced adhesions without organ involvement (P < 0.01), and less inflammatory infiltrates, collagen fibers, and foreign body granulomas than groups B or C (P < 0.01).

CONCLUSIONS

Oral administration of these agents did not prevent adhesions but ameliorated them. Oral Pirfenidone offered the best performance and could be recommended for human use.

Physics and Physiology of Cell Spreading in Two and Three Dimensions

Cells spread on surfaces and within three-dimensional (3-D) matrixes as they grow, divide, and move. Both chemical and physical signals orchestrate spreading during normal development, wound healing, and pathological states such as fibrosis and tumor growth. Diverse molecular mechanisms drive different forms of cell spreading. This article discusses mechanisms by which cells spread in 2-D and 3-D and illustrates new directions in studies of this aspect of cell function.

Current Concepts in Capsular Contracture: Pathophysiology, Prevention, and Management

Over 400,000 women in the United States alone will have breast implant surgery each year. Although capsular contracture represents the most common complication of breast implant surgery, surgeons continue to debate the precise etiology. General agreement exists concerning the inflammatory origin of capsular fibrosis, but the inciting events triggering the inflammatory cascade appear to be multifactorial, making it difficult to predict why one patient may develop capsular contracture while another will not. Accordingly, researchers have explored many different surgical, biomaterial, and medical therapies to address these multiple factors in an attempt to prevent and treat capsular contracture. In the current paper, we aim to inform the reader on the most up-to-date understanding of the pathophysiology, prevention, and treatment of capsular contracture.

Silicone Implants Immobilized with Interleukin-4 Promote the M2 Polarization of Macrophages and Inhibit the Formation of Fibrous Capsules

Breast augmentations with silicone implants can have adverse effects on tissues that, in turn, lead to capsular contracture (CC). One of the potential ways of overcoming CC is to control the implant/host interaction using immunomodulatory agents. Recently, a high ratio of anti-inflammatory (M2) macrophages to pro-inflammatory (M1) macrophages has been reported to be an effective tissue regeneration approach at the implant site. In this study, a biofunctionalized implant was coated with interleukin (IL)-4 to inhibit an adverse immune reaction and promoted tissue regeneration by promoting polarization of macrophages into the M2 pro-healing phenotype in the long term. Surface wettability, nitrogen content, and atomic force microscopy data clearly showed the successful immobilization of IL-4 on the silicone implant. Furthermore, in vitro results revealed that IL-4-coated implants were able to decrease the secretion of inflammatory cytokines (IL-6 and tumor necrosis factor-α) and induced the production of IL-10 and the upregulation of arginase-1 (mannose receptor expressed by M2 macrophage). The efficacy of this immunomodulatory implant was further demonstrated in an in vivo rat model. The animal study showed that the presence of IL-4 diminished the capsule thickness, the amount of collagen, tissue inflammation, and the infiltration of fibroblasts and myofibroblasts. These results suggest that macrophage phenotype modulation can effectively reduce inflammation and fibrous CC on a silicone implant conjugated with IL-4.

Alginate scaffolds improve functional recovery after spinal cord injury

PURPOSE

In this systematic review and meta-analysis, the use of alginate for the repair of the damaged spinal cord was investigated.

METHODS

After an extensive search of databases including MEDLINE, SCOPUS, EMBASE and Web of Science, an initial screening was performed based on inclusion and exclusion criteria. The full text of related articles was reviewed and data mining was performed. Data were analyzed by calculating the mean of ratios between treated and untreated groups using STATA software. Subgroup analysis was also performed due to heterogeneity. Articles were subjected to quality control and PRISMA guidelines were followed.

RESULTS

Twelve studies and 17 experiments were included in the study. After SCI, alginate hydrogel had a moderate effect on motor function recovery (SMD = 0.64; 95% CI 0.28-1.00; p < 0.0001) and alginate scaffolds loaded with drugs, growth factors, or cells on the SCI group compared with untreated SCI animals showed has a strong effect in the treatment of SCI (SMD = 2.82; 95% CI 1.49-4.145; p < 0.0001). Treatment with drug/cell in combination with alginate was more strongly significant compared to the groups treated with drug/cell alone (SMD = 4.55; 95% CI 1.42-7.69; p < 0.0001). Alginate alone or in combination therapy when used as an implant, had a more significant effect than injection.

CONCLUSION

These findings suggest that alginate is an efficient scaffold for functional recovery and even a much better scaffold for drug/cell delivery after SCI.

Antifouling and Mechanical Properties of Photografted Zwitterionic Hydrogel Thin-Film Coatings Depend on the Cross-Link Density

Zwitterionic polymer networks have shown promise in reducing the short- and long-term inflammatory foreign body response to implanted biomaterials by combining the antifouling properties of zwitterionic polymers with the mechanical stability provided by cross-linking. Cross-link density directly modulates mechanical properties (i.e., swelling behavior, resistance to stress and strain, and lubricity) but theoretically could reduce desirable biological properties (i.e., antifouling) of zwitterionic materials. This work examined the effect of varying poly(ethylene glycol) dimethacrylate cross-linker concentration on protein adsorption, cell adhesion, equilibrium swelling, compressive modulus, and lubricity of zwitterionic thin films. Furthermore, this work aimed to determine the appropriate balance among each of these mechanical and biologic properties to produce thin films that are strong, durable, and lubricious, yet also able to resist biofouling. The results demonstrated nearly a 20-fold reduction in fibrinogen adsorption on zwitterionic thin films photografted on polydimethylsiloxane (PDMS) across a wide range of cross-link densities. Interestingly, either at high or low cross-link densities, increased levels of protein adsorption were observed. In addition to fibrinogen, macrophage and fibroblast cell adhesion was reduced significantly on zwitterionic thin films, with a large range of cross-link densities, resulting in low cell counts. The macrophage count was reduced by 30-fold, while the fibroblast count was reduced nearly 10-fold on grafted zwitterionic films relative to uncoated films. Increasing degrees of cell adhesion were noted as the cross-linker concentration exceeded 50%. As expected, increased cross-link density resulted in a reduced swelling but greater compressive modulus. Notably, the coefficient of friction was dramatically reduced for zwitterionic thin films compared to uncoated PDMS across a broad range of cross-link densities, an attractive property for insertional implants. This work identified a broad range of cross-link densities that provide desirable antifouling effects while also maintaining the mechanical functionality of the thin films.

Breast Implants: A Historical Review With Implications for Diagnosis and Modern Surgical Planning

ABSTRACT

Modern breast surgery was first introduced in the United States in 1962 with the use of silicone gel-filled breast implants. Over the past 6 decades, development of breast implants has been challenged by a variety of influencers including aesthetic appeal in shape, texture, and material; challenges in managing outcomes such as contracture, disease, and rupture; and public perception of risks associated with implants. In 1992, silicone breast prostheses were banned by the US Food and Drug Administration with exception for use in breast reconstruction, congenital deformities, or to replace existing implants.The ban led to heightened concerns about implants and possible disease manifestations. Knowledge of the historical evolution of breast prostheses is useful for understanding the associated risks and outcomes unique to each breast implant era. This article aimed to explore characteristics of breast implants by generation, with implications for diagnosis and assistance to modern surgical planning for novice plastic surgeons.

Implant Fibrosis and the Underappreciated Role of Myofibroblasts in the Foreign Body Reaction

Body implants and implantable medical devices have dramatically improved and prolonged the life of countless patients. However, our body repair mechanisms have evolved to isolate, reject, or destroy any object that is recognized as foreign to the organism and inevitably mounts a foreign body reaction (FBR). Depending on its severity and chronicity, the FBR can impair implant performance or create severe clinical complications that will require surgical removal and/or replacement of the faulty device. The number of review articles discussing the FBR seems to be proportional to the number of different implant materials and clinical applications and one wonders, what else is there to tell? We will here take the position of a fibrosis researcher (which, coincidentally, we are) to elaborate similarities and differences between the FBR, normal wound healing, and chronic healing conditions that result in the development of peri-implant fibrosis. After giving credit to macrophages in the inflammatory phase of the FBR, we will mainly focus on the activation of fibroblastic cells into matrix-producing and highly contractile myofibroblasts. While fibrosis has been discussed to be a consequence of the disturbed and chronic inflammatory milieu in the FBR, direct activation of myofibroblasts at the implant surface is less commonly considered. Thus, we will provide a perspective how physical properties of the implant surface control myofibroblast actions and accumulation of stiff scar tissue. Because formation of scar tissue at the surface and around implant materials is a major reason for device failure and extraction surgeries, providing implant surfaces with myofibroblast-suppressing features is a first step to enhance implant acceptance and functional lifetime. Alternative therapeutic targets are elements of the myofibroblast mechanotransduction and contractile machinery and we will end with a brief overview on such targets that are considered for the treatment of other organ fibroses.

Silicone Breast Implant Coated with Triamcinolone Inhibited Breast-Implant-Induced Fibrosis in a Porcine Model

Cosmetic silicone implants for breast reconstruction often lead to medical complications, such as abnormally excessive fibrosis driven by foreign body granulomatous inflammation. The purpose of this study was to develop a silicone breast implant capable of local and controlled release of a glucocorticoid drug triamcinolone acetonide (TA) for the prevention of silicone-breast-implant-induced fibrosis in a Yorkshire pig model (in vivo). Implants were dip-coated in a TA solution to load 1.85 μg/cm² of TA in the implant shell, which could release the drug in a sustained manner for over 50 days. Immunohistochemical analysis for 12 weeks showed a decline in tumor necrosis factor-α expression, capsule thickness, and collagen density by 82.2%, 55.2%, and 32.3%, respectively. Furthermore, the counts of fibroblasts, macrophages, and myofibroblasts in the TA-coated implants were drastically reduced by 57.78%, 48.8%, and 64.02%, respectively. The TA-coated implants also lowered the expression of vimentin and α-smooth muscle actin proteins, the major profibrotic fibroblast and myofibroblast markers, respectively. Our findings suggest that TA-coated silicone breast implants can be a promising strategy for safely preventing fibrosis around the implants.

Short-term treatment outcomes and safety of two representative brands of the fifth-generation silicone gel-filled breast implants in Korea

It is allegedly reported that the BellaGel^® SmoothFine (HansBiomed Co. Ltd., Seoul, Korea) and Motiva Ergonomix^TM (Establishment Labs Holdings Inc., Alajuela, Costa Rica) are representative brands of a microtextured breast implant in Korea. We compared short-term safety outcomes between them. We evaluated the patients who received breast augmentation using the BellaGel^® SmoothFine (n = 264) or the Motiva Ergonomix™ (n = 76) for aesthetic purposes and those with available medical records. They were followed up during a mean period of 122.11 ± 95.37 (4-477) and 126.80 ± 116.29 (13-534) days in the corresponding order. Early seroma occurred at an incidence of 1.89 and 5.26% following breast augmentation using the BellaGel^® SmoothFine and the Motiva Ergonomix^TM, respectively. This difference reached statistical significance (p < 0.05). Of note, CC occurred at an incidence of 2.27 and 0.00% in the corresponding order. Cumulative incidences of postoperative complications depending on the type of breast implants showed no significant difference; statistical significance was analyzed using the log-rank test (χ² = 1.71, df = 1, p = 0.19). Cumulative survival of the breast implant is shown in Table 3; the Motiva Ergonomix™ showed a longer survival as compared with the BellaGel^® SmoothFine (130.13 ± 13.70 vs. 120.45 ± 5.76 days). In conclusion, we describe short-term treatment outcomes and safety of an implant-based breast augmentation using two representative brands of the fifth-generation silicone gel-filled breast implants in Korean women.

Review of silicone surface modification techniques and coatings for antibacterial/antimicrobial applications to improve breast implant surfaces

Silicone implants are widely used in the medical field for plastic or reconstructive surgeries for the purpose of soft tissue issues. However, as with any implanted object, healthcare-associated infections are not completely avoidable. The material suffers from a lack of biocompatibility and is often subject to bacterial/microbial infections characterized by biofilm growth. Numerous strategies have been developed to either prevent, reduce, or fight bacterial adhesion by providing an antibacterial property. The present review summarizes the diverse approaches to deal with bacterial infections on silicone surfaces along with the different methods to activate/oxidize the surface before any surface modifications. It includes antibacterial coatings with antibiotics or nanoparticles, covalent attachment of active bacterial molecules like peptides or polymers. Regarding silicone surfaces, the activation step is essential to render the surface reactive for any further modifications using energy sources (plasma, UV, ozone) or chemicals (acid solutions, sol-gel strategies, chemical vapor deposition). Meanwhile, corresponding work on breast silicone prosthesis is discussed. The latter is currently in the line of sight for causing severe capsular contractures. Specifically, to that end, besides chemical modifications, the antibacterial effect can also be achieved by physical surface modifications by adjusting the surface roughness and topography for instance.

Ultrastructural features of the double capsulated connective tissue around silicone prostheses

The implantation of breast prostheses for both aesthetic and reconstructive purposes has been growing exponentially in the last 20 years. Safety and prosthesis lifespan are majorly debated issues in relation to the correlated long-term complications. Mainly the periprosthetic capsule that develops around the implant is often the cause of complications and particularly for macrotextured silicone breast implants. Some reports have tried to elucidate the mechanism by which macrotextured silicone implants undergo damage and cause double capsule formation. In this study, we investigated the morphological characteristics of double capsule of macrotextured implants surgically removed from patients. With the use of microscopy techniques, this work analyzed the newly formed tissue observed in the interaction between synthetic and biological surfaces.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

Ex-vivo mechanical sealing properties and toxicity of a bioadhesive patch as sealing system for fetal membrane iatrogenic defects

Preterm prelabor rupture of membranes (PPROM) is the most frequent complication of fetal surgery. Strategies to seal the membrane defect created by fetoscopy aiming to reduce the occurrence of PPROM have been attempted with little success. The objective of this study was to evaluate the ex-vivo mechanical sealing properties and toxicity of four different bioadhesives integrated in semi-rigid patches for fetal membranes. We performed and ex-vivo study using term human fetal membranes to compare the four integrated patches composed of silicone or silicone-polyurethane combined with dopaminated-hyaluronic acid or hydroxypropyl methylcellulose (HPMC). For mechanical sealing properties, membranes were mounted in a multiaxial inflation device with saline, perforated and sealed with the 4 combinations. We measured bursting pressure and maximum pressure free of leakage (n = 8). For toxicity, an organ culture of membranes sealed with the patches was used to measure pyknotic index (PI) and lactate dehydrogenase (LDH) concentration (n = 5). All bioadhesives achieved appropriate bursting pressures, but only HPMC forms achieved high maximum pressures free of leakage. Concerning toxicity, bioadhesives showed low PI and LDH levels, suggesting no cell toxicity. We conclude that a semi-rigid patch coated with HPMC achieved ex-vivo sealing of iatrogenic defects in fetal membranes with no signs of cell toxicity. These results warrant further research addressing long-term adhesiveness and feasibility as a sealing system for fetoscopy.

Excessive fibrosis and non-function after ATOMS (adjustable transobturator male system): A case of capsular contracture?

The adjustable transobturator male system (ATOMS) treats post-prostatectomy urinary incontinence by compression of the proximal bulbous urethra. It reminds of the Kaufman prosthesis described in 1978. We describe a case where an excessive fibrotic reaction occurred around the cushion. Furthermore, the bulbous urethra underneath, developed severe atrophy devoid of any visible blood supply. We suspect ongoing shear forces around the cushion while sitting resulting in a chain reaction of acute through chronic inflammation and progressive fibrosis and encapsulation. Does the encapsulation lead to capsular contracture resulting in non-function?

Size matters-in vitro behaviour of human fibroblasts on textured silicone surfaces with different pore sizes

Capsular contracture remains a challenge in plastic surgery and represents one of the most common postoperative complications following alloplastic breast reconstruction. The impact of the surface structure of silicone implants on the foreign body reaction and the behaviour of connective tissue-producing cells has already been discussed. The aim of this study was to investigate different pore sizes of silicone surfaces and their influence on human fibroblasts in an in vitro model. Four different textures (no, fine, medium and coarse texture) produced with the salt-loss technique, have been assessed in an in vitro model. Human fibroblasts were seeded onto silicone sheets and evaluated after 1, 4 and 7 days microscopically, with viability assay and gene expression analysis. Comparing the growth behaviour and adhesion of the fibroblasts on the four different textures, a dense cell layer, good adhesion and bridge-building ability of the cells could be observed for the fine and medium texture. Cell number and viability of the cells were increasing during the time course of experiments on every texture. TGFß1 was lowest expressed on the fine and medium texture indicating a trend for decreased fibrotic activity. For silicone surfaces produced with the salt-loss technique, we were able to show an antifibrotic effect of smaller sized pores. These findings underline the hypothesis of a key role of the implant surface and the pore size and pore structure in preventing capsular contracture.

Efficient reduction of fibrous capsule formation around silicone breast implants densely grafted with 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers by heat-induced polymerization

This article presents the efficacy of heat-induced MPC-grafting against excessive fibrous capsule formation and related inflammation in tissues surrounding silicone breast implants inserted in a pig model.

Modulation of Foreign Body Reaction against PDMS Implant by Grafting Topographically Different Poly(acrylic acid) Micropatterns

The surface of poly(dimethylsiloxane) (PDMS) is grafted with poly(acrylic acid) (PAA) layers via surface-initiated photopolymerization to suppress the capsular contracture resulting from a foreign body reaction. Owing to the nature of photo-induced polymerization, various PAA micropatterns can be fabricated using photolithography. Hole and stripe micropatterns ≈100-µm wide and 3-µm thick are grafted onto the PDMS surface without delamination. The incorporation of PAA micropatterns provides not only chemical cues by hydrophilic PAA microdomains but also topographical cues by hole or stripe micropatterns. In vitro studies reveal that a PAA-grafted PDMS surface has a lower proliferation of both macrophages (Raw 264.7) and fibroblasts (NIH 3T3) regardless of the pattern presence. However, PDMS with PAA micropatterns, especially stripe micropatterns, minimizes the aggregation of fibroblasts and their subsequent differentiation into myofibroblasts. An in vivo study also shows that PDMS samples with stripe micropatterns polarized macrophages into anti-inflammatory M2 macrophages and most effectively inhibits capsular contracture, which is demonstrated by investigation of inflammation score, transforming-growth-factor-β expression, number of macrophages, and myofibroblasts as well as the collagen density and capsule thickness.