Timing optimization of low-dose first-pass analysis dynamic CT myocardial perfusion measurement: validation in a swine model

Reproducibility of a single-volume dynamic CT myocardial blood flow measurement technique: validation in a swine model

BACKGROUND

We prospectively assessed the reproducibility of a novel low-dose single-volume dynamic computed tomography (CT) myocardial blood flow measurement technique.

METHODS

Thirty-four pairs of measurements were made under rest and stress conditions in 13 swine (54.3 ± 12.3 kg). One or two acquisition pairs were acquired in each animal with a 10-min delay between each pair. Contrast (370 mgI/mL; 0.5 mL/kg) and a diluted contrast/saline chaser (0.5 mL/kg; 30:70 contrast/saline) were injected peripherally at 5 mL/s, followed by bolus tracking and acquisition of a single volume scan (100 kVp; 200 mA) with a 320-slice CT scanner. Bolus tracking and single volume scan data were used to derive perfusion in mL/min/g using a first-pass analysis model; the coronary perfusion territories of the left anterior descending (LAD), left circumflex (LCx), and right coronary artery (RCA) were automatically assigned using a previously validated minimum-cost path technique. The reproducibility of CT myocardial perfusion measurement within the LAD, LCx, RCA, and the whole myocardium was assessed via regression analysis. The average CT dose index (CTDI) of perfusion measurement was recorded.

RESULTS

The repeated first (Pmyo1) and second (Pmyo2) single-volume CT perfusion measurements were related by Pmyo2 = 1.01Pmyo1 - 0.03(ρ = 0.96; RMSE = 0.08 mL/min/g; RMSE = 0.07 mL/min/g) for the whole myocardium, and by Preg2 = 0.86Preg1 + 0.13(ρ = 0.87; RMSE = 0.31 mL/min/g; RMSE = 0.29 mL/min/g) for the LAD, LCx, and RCA perfusion territories. The average CTDI of the single-volume CT perfusion measurement was 10.5 mGy.

CONCLUSION

The single-volume CT blood flow measurement technique provides reproducible low-dose myocardial perfusion measurement using only bolus tracking data and a single whole-heart volume scan.

RELEVANCE STATEMENT

The single-volume CT blood flow measurement technique is a noninvasive tool that reproducibly measures myocardial perfusion and provides coronary CT angiograms, allowing for simultaneous anatomic-physiologic assessment of myocardial ischemia.

KEY POINTS

A low-dose single-volume dynamic CT myocardial blood flow measurement technique is reproducible. Motion misregistration artifacts are eliminated using a single-volume CT perfusion technique. This technique enables combined anatomic-physiologic assessment of coronary artery disease.

A patient-specific timing protocol for improved CT pulmonary angiography

Rationale and objectives

To improve the image quality of CT pulmonary angiography (CTPA) using a patient-specific timing protocol.

Material and methods

A total of 24 swine (48.5 ± 14.3 kg) underwent continuous contrast-enhanced dynamic CT acquisition over 30 s to capture the pulmonary arterial input function (AIF). Multiple contrast injections were made under different cardiac outputs (1.4-5.1 L/min), resulting in a total of 154 AIF curves. The volume scans with maximal enhancement in these AIF curves were retrospectively selected as the reference standard (group A). Two prospective CTPA protocols with bolus-tracking were then simulated using these AIF curves: one used a fixed delay of 5 s between triggering and CTPA acquisition (group B), while the other used a specific delay based on one-half of the contrast injection duration (group C). The mean attenuation, signal-to-noise (SNR) and contrast-to-noise ratios (CNR) between the three groups were then compared using independent sample t-test. Subjective image quality scores were also compared using Wilcoxon-Mann-Whitney test.

Results

The mean attenuation of pulmonary arteries for group A, B and C (expressed in [HU]) were 870.1 ± 242.5 HU, 761.1 ± 246.7 HU and 825.2 ± 236.8 HU, respectively. The differences in the mean SNR and CNR between Group A and Group C were not significant (SNR: 65.2 vs. 62.4, CNR: 59.6 vs. 56.4, both p > 0.05), while Group B was significantly lower than Group A (p < 0.05).

Conclusion

The image quality of CT pulmonary angiography is significantly improved with a timing protocol determined using contrast injection delivery time, as compared with a standard timing protocol with a fixed delay between bolus triggering and image acquisition.

Low-dose quantitative CT myocardial flow measurement using a single volume scan: phantom and animal validation

Purpose

To validate a low-dose, single-volume quantitative CT myocardial flow technique in a cardiovascular flow phantom and a swine animal model of coronary artery disease.

Approach

A cardiovascular flow phantom was imaged dynamically over different flow rates (0.97 to 2.45    mL / min / g ) using 15 mL of contrast per injection. Six swine (37 ± 8    kg ) were also imaged dynamically, with different left anterior descending coronary artery balloon stenoses assessed under intracoronary adenosine stress, using 1    mL / kg of contrast per injection. The resulting images were used to simulate dynamic bolus tracking and peak volume scan acquisition. After which, first-pass single-compartment modeling was performed to derive quantitative flow, where the pre-contrast myocardial attenuation was assumed to be spatially uniform. The accuracy of CT flow was then assessed versus ultrasound and microsphere flow in the phantom and animal models, respectively, using regression analysis.

Results

Single-volume quantitative CT flow measurements in the phantom (Q CT _ PHANTOM ) were related to reference ultrasound flow measurements (Q US ) by Q CT _ PHANTOM = 1.04 Q US - 0.1 (Pearson's r = 0.98 ; RMSE = 0.09    mL / min / g ). In the animal model (Q CT _ ANIMAL ), they were related to reference microsphere flow measurements (Q MICRO ) by Q CT _ ANIMAL = 1.00 Q MICRO - 0.05 (Pearson's r = 0.96 ; RMSE = 0.48    mL / min / g ). The effective dose per CT measurement was 1.21 mSv.

Conclusions

The single-volume quantitative CT flow technique only requires bolus tracking data, spatially uniform pre-contrast myocardial attenuation, and a single volume scan acquired near the peak aortic enhancement for accurate, low-dose, myocardial flow measurement (in mL/min/g) under rest and adenosine stress conditions.

Evaluation and timing optimization of CT perfusion first pass analysis in comparison to maximum slope model in pancreatic adenocarcinoma

For implementation, performance evaluation and timing optimization of CT perfusion first pass analysis (FPA) by correlation with maximum slope model (MSM) in pancreatic adenocarcinoma, dynamic CT perfusion acquisitions of 34 time-points were performed in 16 pancreatic adenocarcinoma patients. Regions of interest were marked in both parenchyma and carcinoma. FPA, a low radiation exposure CT perfusion technique, was implemented. Blood flow (BF) perfusion maps were calculated using FPA and MSM. Pearson's correlation between FPA and MSM was calculated at each evaluated time-point to determine optimum timing for FPA. Differences in BF between parenchyma and carcinoma were calculated. Average BF for MSM was 106.8 ± 41.5 ml/100 ml/min in parenchyma and 42.0 ± 24.8 ml/100 ml/min in carcinoma, respectively. For FPA, values ranged from 85.6 ± 37.5 ml/100 ml/min to 117.7 ± 44.5 ml/100 ml/min in parenchyma and from 27.3 ± 18.8 ml/100 ml/min to 39.5 ± 26.6 ml/100 ml/min in carcinoma, depending on acquisition timing. A significant difference (p value < 0.0001) between carcinoma and parenchyma was observed at all acquisition times based on FPA measurements. FPA shows high correlation with MSM (r > 0.90) and 94% reduction in the radiation dose compared to MSM. CT perfusion FPA, where the first scan is obtained after the arterial input function exceeds a threshold of 120 HU, followed by a second scan after 15.5-20.0 s, could be used as a potential imaging biomarker with low radiation exposure for diagnosing and evaluating pancreatic carcinoma in clinical practice, showing high correlation with MSM and the ability to differentiate between parenchyma and carcinoma.

Computation of contrast-enhanced perfusion using only two CT scan phases: a proof-of-concept study on abdominal organs

Background

Computed tomography perfusion imaging (CTPI) by repeated scanning has clinical relevance but implies relatively high radiation exposure. We present a method to measure perfusion from two CT scan phases only, considering tissue enhancement, feeding vessel (aortic) peak enhancement, and bolus shape.

Methods

CTPI scans (each with 40 frames acquired every 1.5 s) of 11 patients with advanced hepatocellular carcinoma (HCC) enrolled between 2012 and 2016 were retrospectively analysed (aged 69 ± 9 years, 8/11 males). Perfusion was defined as the maximal slope of the time-enhancement curve divided by the peak enhancement of the feeding vessel (aorta). Perfusion was computed two times, first using the maximum slope derived from all data points and then using the peak tissue enhancement and the bolus shape obtained from the aortic curve.

Results

Perfusion values from the two methods were linearly related (r2 = 0.92, p < 0.001; Bland–Altman analysis bias -0.12). The mathematical model showed that the perfusion ratio of two ROIs with the same feeding vessel (aorta) corresponds to their peak enhancement ratio (r2 = 0.55, p < 0.001; Bland–Altman analysis bias -0.68). The relationship between perfusion and tissue enhancement is predicted to be linear in the clinical range of interest, being only function of perfusion, peak feeding vessel enhancement, and bolus shape.

Conclusions

This proof-of-concept study showed that perfusion values of HCC, kidney, and pancreas could be computed using enhancement measured only with two CT scan phases, if aortic peak enhancement and bolus shape are known.

Absolute cerebral blood flow: Assessment with a novel low-radiation-dose dynamic CT perfusion technique in a swine model

RATIONALE AND OBJECTIVES

To validate the accuracy of a novel low-dose dynamic CT perfusion technique in a swine model using fluorescent microsphere measurement as the reference standard.

MATERIALS AND METHODS

Contrast-enhanced dynamic CT perfusion was performed in five swine at baseline and following brain embolization. Reference microspheres and intravenous contrast (370 mg/ml iodine, 1 ml/kg) were injected (5 ml/s), followed by dynamic CT perfusion. Scan parameters were 320×0.5 mm, 100 kVp and 200 mA. On average, 47 contrast-enhanced volume scans were acquired per acquisition to capture the time attenuation curve. For each acquisition, only two systematically selected volume scans were used to quantify brain perfusion with first-pass analysis technique. The first volume scan was selected at the base, simulating bolus tracking, while the second volume at the peak of the time attenuation curve similar to a CT angiogram. Regional low-dose CT perfusion measurements were compared to the microsphere perfusion measurements with t-test, linear regression and Bland-Altman analysis. The radiation dose of the two-volume CT perfusion technique was determined.

RESULTS

Low-dose CT perfusion measurements (P_CT) showed excellent correlation with reference microsphere perfusion measurements (P_MICRO) by P_CT = 1.15 P_MICRO - 0.01 (r = 0.93, p ≤ 0.01). The CT dose index and dose-length product for the two-volume CT perfusion technique were 25.6 mGy and 409.6 mGy, respectively.

CONCLUSIONS

The accuracy and repeatability of a low-dose dynamic CT perfusion technique was validated in a swine model. This technique has the potential for accurate diagnosis and follow up of stroke and vasospasm.

Combining computed tomography and biologically effective dose in radiomics and deep learning improves prediction of tumor response to robotic lung stereotactic body radiation therapy

PURPOSE

The aim of this study is to improve the performance of machine learning (ML) models in predicting response of non-small cell lung cancer (NSCLC) to stereotactic body radiation therapy (SBRT) by integrating image features from pre-treatment computed tomography (CT) with features from the biologically effective dose (BED) distribution.

MATERIALS AND METHODS

Image features, consisting of crafted radiomic features or machine-learned features extracted using a convolutional neural network, were calculated from pre-treatment CT data and from dose distributions converted into BED for 80 NSCLC lesions over 76 patients treated with robotic guided SBRT. ML models using different combinations of features were trained to predict complete or partial response according to response criteria in solid tumors, including radiomics CT (Rad_CT ), radiomics CT and BED (Rad_CT,BED ), deep learning (DL) CT (DL_CT ), and DL CT and BED (DL_CT,BED ). Training of ML included feature selection by neighborhood component analysis followed by ensemble ML using robust boosting. A model was considered as acceptable when the sum of average sensitivity and specificity on test data in repeated cross validations was at least 1.5.

RESULTS

Complete or partial response occurred in 58 out of 80 lesions. The best models to predict the tumor response were those using BED variables, achieving significantly better area under curve (AUC) and accuracy than those using only features from CT, including a Rad_CT,BED model using three radiomic features from BED, which scored an accuracy of 0.799 (95% confidence intervals (0.75-0.85)) and AUC of 0.773 (0.688-0.846), and a DL_CT,BED model also using three variables with an accuracy of 0.798 (0.649-0.829) and AUC of 0.812 (0.755-0.867).

CONCLUSION

According to our results, the inclusion of BED features improves the response prediction of ML models for lung cancer patients undergoing SBRT, regardless of the use of radiomic or DL features.

Combining perfusion and angiography with a low-dose cardiac CT technique: a preliminary investigation in a swine model

Morphological and physiological assessment of coronary artery disease (CAD) is necessary for proper stratification of CAD risk. The objective was to evaluate a low-dose cardiac CT technique that combines morphological and physiological assessment of CAD. The low-dose technique was evaluated in twelve swine, where three of the twelve had coronary balloon stenosis. The technique consisted of rest perfusion measurement combined with angiography followed by stress perfusion measurement, where the ratio of stress to rest was used to derive coronary flow reserve (CFR). The technique only required two volume scans for perfusion measurement in mL/min/g; hence, four volume scans were acquired in total; two for rest with angiography and two for stress. All rest, stress, and CFR measurements were compared to a previously validated reference technique that employed 20 consecutive volume scans for rest perfusion measurement combined with angiography, and stress perfusion measurement, respectively. The 32 cm diameter volumetric CT dose index (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{CTDI}}_{\text{vol}}^{32}$$\end{document}CTDIvol32) and size-specific dose estimate (SSDE) of the low-dose technique were also recorded. All low-dose perfusion measurements (P_LOW) in mL/min/g were related to reference perfusion measurements (P_REF) through regression by P_LOW = 1.04 P_REF − 0.08 (r = 0.94, RMSE = 0.32 mL/min/g). The \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{CTDI}}_{\text{vol}}^{32}$$\end{document}CTDIvol32 and SSDE of the low-dose cardiac CT technique were 8.05 mGy and 12.80 mGy respectively, corresponding to an estimated effective dose and size-specific effective dose of 1.8 and 2.87 mSv, respectively. Combined morphological and physiological assessment of coronary artery disease is feasible using a low-dose cardiac CT technique.

Impact of Abnormal Remote Stress Myocardial Blood Flow by Dynamic CT Perfusion on Clinical Outcomes

The objective of this study was to investigate the incremental prognostic value for adverse events of myocardial blood flow (MBF) derived from stress computed tomography perfusion (CTP) at remote myocardium over cardiac risk factors and ischemia. We prospectively analyzed 242 patients who underwent dynamic CTP and CT angiography. Adverse events were defined as a composite of all-cause mortality, non-fatal myocardial infarction, unstable angina, heart failure requiring hospitalization, peripheral artery disease, and stroke. MBF value was calculated in each myocardial segment and ischemia was defined as mild decrease in MBF in two consecutive segments or moderate decrease in a single segment accompanied with a coronary stenosis ≥50%. The mean MBF of the non-ischemic segments was defined as remote MBF. We divided the patients into two groups by median MBF value of 1.15 ml/min/g. During a median follow-up of 18 months, 18 patients had adverse events. Annual event rate showed a significant difference between patients with low (≤1.15 ml/min/g) and high (>1.15 ml/min/g) MBF (6.1% vs 1.8%, p = 0.02). Univariate analysis showed that low MBF was a significant predictor of events (hazard ratio (HR): 3.4; 95% confidence interval (CI): 1.2 to 12.0; p = 0.02). This relationship maintained significant after adjusted for the presence of ischemia and cardiac risk factors (HR: 3.0; 95%CI: 1.1 to 11.1; p = 0.04). In conclusion, MBF value ≤1.15 ml/min/g derived from dynamic CTP in remote myocardium is significantly related with poor outcome and this relationship was independent of myocardial ischemia and cardiac risk factors.

Computed tomography for myocardial characterization in ischemic heart disease: a state-of-the-art review

This review provides an overview of the currently available computed tomography (CT) techniques for myocardial tissue characterization in ischemic heart disease, including CT perfusion and late iodine enhancement. CT myocardial perfusion imaging can be performed with static and dynamic protocols for the detection of ischemia and infarction using either single- or dual-energy CT modes. Late iodine enhancement may be used for the analysis of myocardial infarction. The accuracy of these CT techniques is highly dependent on the imaging protocol, including acquisition timing and contrast administration. Additionally, the options for qualitative and quantitative analysis and the accuracy of each technique are discussed.

Dynamic pulmonary CT perfusion using first-pass analysis technique with only two volume scans: Validation in a swine model

PURPOSE

To evaluate the accuracy of a low-dose first-pass analysis (FPA) CT pulmonary perfusion technique in comparison to fluorescent microsphere measurement as the reference standard.

METHOD

The first-pass analysis CT perfusion technique was validated in six swine (41.7 ± 10.2 kg) for a total of 39 successful perfusion measurements. Different perfusion conditions were generated in each animal using serial balloon occlusions in the pulmonary artery. For each occlusion, over 20 contrast-enhanced CT images were acquired within one breath (320 x 0.5mm collimation, 100kVp, 200mA or 400mA, 350ms gantry rotation time). All volume scans were used for maximum slope model (MSM) perfusion measurement, but only two volume scans were used for the FPA measurement. Both MSM and FPA perfusion measurements were then compared to the reference fluorescent microsphere measurements.

RESULTS

The mean lung perfusion of MSM, FPA, and microsphere measurements were 6.21 ± 3.08 (p = 0.008), 6.59 ± 3.41 (p = 0.44) and 6.68 ± 3.89 ml/min/g, respectively. The MSM (PMSM) and FPA (PFPA) perfusion measurements were related to the corresponding reference microsphere measurement (PMIC) by PMSM = 0.51PMIC + 2.78 (r = 0.64) and PFPA = 0.79PMIC + 1.32 (r = 0.90). The root-mean-square-error for the MSM and FPA techniques were 3.09 and 1.72 ml/min/g, respectively. The root-mean-square-deviation for the MSM and FPA techniques were 2.38 and 1.50 ml/min/g, respectively. The CT dose index for MSM and FPA techniques were 138.7 and 8.4mGy, respectively.

CONCLUSIONS

The first-pass analysis technique can accurately measure regional pulmonary perfusion and has the potential to reduce the radiation dose associated with dynamic CT perfusion for assessment of pulmonary disease.

Low-Radiation-Dose Stress Myocardial Perfusion Measurement Using First-Pass Analysis Dynamic Computed Tomography: A Preliminary Investigation in a Swine Model

OBJECTIVES

The aim of this study was to assess the feasibility of a prospective first-pass analysis (FPA) dynamic computed tomography (CT) perfusion technique for accurate low-radiation-dose global stress perfusion measurement.

MATERIALS AND METHODS

The prospective FPA technique was evaluated in 10 swine (42 ± 12 kg) by direct comparison to a previously validated retrospective FPA technique. Of the 10 swine, 3 had intermediate stenoses with fractional flow reserve severities of 0.70 to 0.90. In each swine, contrast and saline were injected peripherally followed by dynamic volume scanning with a 320-slice CT scanner. Specifically, for the reference standard retrospective FPA technique, volume scans were acquired continuously at 100 kVp and 200 mA over 15 to 20 seconds, followed by systematic selection of only 2 volume scans for global perfusion measurement. For the prospective FPA technique, only 2 volume scans were acquired at 100 kVp and 50 mA for global perfusion measurement. All prospective global stress perfusion measurements were then compared with the corresponding reference standard retrospective global stress perfusion measurements through regression analysis. The CTDIvol and size-specific dose estimate of the prospective FPA technique were also determined.

RESULTS

All prospective global stress perfusion measurements (PPRO) at 50 mA were in good agreement with the reference standard retrospective global stress perfusion measurements (PREF) at 200 mA (PPRO = 1.07 PREF -0.09, r = 0.94; root-mean-square error = 0.30 mL/min per gram). The CTDIvol and size-specific dose estimate of the prospective FPA technique were 2.3 and 3.7 mGy, respectively.

CONCLUSIONS

Accurate low-radiation-dose global stress perfusion measurement is feasible using a prospective FPA dynamic CT perfusion technique.