Potential technology for studying dosimetry and response to airborne chemical and biological pollutants

Computational fluid dynamics modeling of Bacillus anthracis spore deposition in rabbit and human respiratory airways

Three-dimensional computational fluid dynamics and Lagrangian particle deposition models were developed to compare the deposition of aerosolized Bacillus anthracis spores in the respiratory airways of a human with that of the rabbit, a species commonly used in the study of anthrax disease. The respiratory airway geometries for each species were derived respectively from computed tomography (CT) and μCT images. Both models encompassed airways that extended from the external nose to the lung with a total of 272 outlets in the human model and 2878 outlets in the rabbit model. All simulations of spore deposition were conducted under transient, inhalation-exhalation breathing conditions using average species-specific minute volumes. Two different exposure scenarios were modeled in the rabbit based upon experimental inhalation studies. For comparison, human simulations were conducted at the highest exposure concentration used during the rabbit experimental exposures. Results demonstrated that regional spore deposition patterns were sensitive to airway geometry and ventilation profiles. Due to the complex airway geometries in the rabbit nose, higher spore deposition efficiency was predicted in the nasal sinus compared to the human at the same air concentration of anthrax spores. In contrast, higher spore deposition was predicted in the lower conducting airways of the human compared to the rabbit lung due to differences in airway branching pattern. This information can be used to refine published and ongoing biokinetic models of inhalation anthrax spore exposures, which currently estimate deposited spore concentrations based solely upon exposure concentrations and inhaled doses that do not factor in species-specific anatomy and physiology for deposition.

Development of a Zealand white rabbit deposition model to study inhalation anthrax

Despite using rabbits in several inhalation exposure experiments to study diseases such as anthrax, there is a lack of understanding regarding deposition characteristics and fate of inhaled particles (bio-aerosols and viruses) in the respiratory tracts of rabbits. Such information allows dosimetric extrapolation to humans to inform human outcomes. The lung geometry of the New Zealand white rabbit (referred to simply as rabbits throughout the article) was constructed using recently acquired scanned images of the conducting airways of rabbits and available information on its acinar region. In addition, functional relationships were developed for the lung and breathing parameters of rabbits as a function of body weight. The lung geometry and breathing parameters were used to extend the existing deposition model for humans and several other species to rabbits. Evaluation of the deposition model for rabbits was made by comparing predictions with available measurements in the literature. Deposition predictions in the lungs of rabbits indicated smaller deposition fractions compared to those found in humans across various particle diameter ranges. The application of the deposition model for rabbits was demonstrated by extrapolating deposition predictions in rabbits to find equivalent human exposure concentrations assuming the same dose-response relationship between the two species. Human equivalent exposure concentration levels were found to be much smaller than those for rabbits.

Tour of a labyrinth: exploring the vertebrate nose

This special issue of The Anatomical Record is the outcome of a symposium entitled "Inside the Vertebrate Nose: Evolution, Structure and Function." The skeletal framework of the nasal cavity is a complicated structure that often houses sinuses and comprises an internal skeleton of bone or cartilage that can vary greatly in architecture among species. The nose serves multiple functions, including olfaction and respiratory air-conditioning, and its morphology is constrained by evolution, development, and conflicting demands on cranial space, such as enlarged orbits. The nasal cavity of vertebrates has received much more attention in the last decade due to the emergence of nondestructive methods that allow improved visualization of the internal anatomy of the skull, such as high-resolution x-ray computed tomography and magnetic resonance imaging. The 17 articles included here represent a broad range of investigators, from paleontologists to engineers, who approach the nose from different perspectives. Key topics include the evolution and development of the nose, its comparative anatomy and function, and airflow through the nasal cavity of individual species. In addition, this special issue includes review articles on anatomical reduction of the olfactory apparatus in both cetaceans and primates (the vomeronasal system), as well as the molecular biology of olfaction in vertebrates. Together these articles provide an expansive summary of our current understanding of vertebrate nasal anatomy and function. In this introduction, we provide background information and an overview of each of the three primary topics, and place each article within the context of previous research and the major challenges that lie ahead.

Reconstruction and morphometric analysis of the nasal airway of the white-tailed deer (Odocoileus virginianus) and implications regarding respiratory and olfactory airflow

Compared with other mammals (e.g., primates, rodents, and carnivores), the form and function of the ungulate nasal fossa, in particular the ethmoidal region, has been largely unexplored. Hence, the nasal anatomy of the largest prey species remains far less understood than that of their predators, rendering comparisons and evolutionary context unclear. Of the previous studies of nasal anatomy, none have investigated the detailed anatomy and functional morphology of the white-tailed deer (Odocoileus virginianus), a species that is ubiquitous throughout North and Central America and in northern regions of South America. Here, nasal form and function is quantitatively investigated in an adult white-tailed deer using high-resolution magnetic resonance imaging, combined with anatomical reconstruction and morphometric analysis techniques. The cross-sectional anatomy of the airway is shown and a three-dimensional anatomical model of the convoluted nasal fossa is reconstructed from the image data. A detailed morphometric analysis is presented that includes quantitative distributions of airway size and shape (e.g., airway perimeter, cross-sectional area, surface area) and the functional implications of these data regarding respiratory and olfactory airflow are investigated. The white-tailed deer is shown to possess a long, double scroll maxilloturbinal that occupies approximately half of the length of the nasal fossa and provides a large surface area for respiratory heat and moisture exchange. The ethmoidal region contains a convoluted arrangement of folded ethmoturbinals that appear to be morphologically distinct from the single and double scroll ethmoturbinals found in most other non-primates. This complex folding provides a large surface area in the limited space available for chemical sensing, due to the expansive maxilloturbinal. Morphologically, the white-tailed deer is shown to possess a dorsal meatus that leads to an olfactory recess, a nasal architecture that has been shown in other non-primate species to cause unique nasal airflow patterns to develop during sniffing that are optimized for odorant delivery to the sensory part of the nose. Additionally, we demonstrate that, during respiration, airflow in the nasal vestibule and the anterior maxilloturbinal region may be transitional or turbulent, in which case turbulent mixing is expected to enhance respiratory heat and moisture exchange, which could be an important contribution to thermoregulation and water conservation in the white-tailed deer.

Comparative computational modeling of airflows and vapor dosimetry in the respiratory tracts of rat, monkey, and human

Computational fluid dynamics (CFD) models are useful for predicting site-specific dosimetry of airborne materials in the respiratory tract and elucidating the importance of species differences in anatomy, physiology, and breathing patterns. We improved the imaging and model development methods to the point where CFD models for the rat, monkey, and human now encompass airways from the nose or mouth to the lung. A total of 1272, 2172, and 135 pulmonary airways representing 17±7, 19±9, or 9±2 airway generations were included in the rat, monkey and human models, respectively. A CFD/physiologically based pharmacokinetic model previously developed for acrolein was adapted for these anatomically correct extended airway models. Model parameters were obtained from the literature or measured directly. Airflow and acrolein uptake patterns were determined under steady-state inhalation conditions to provide direct comparisons with prior data and nasal-only simulations. Results confirmed that regional uptake was sensitive to airway geometry, airflow rates, acrolein concentrations, air:tissue partition coefficients, tissue thickness, and the maximum rate of metabolism. Nasal extraction efficiencies were predicted to be greatest in the rat, followed by the monkey, and then the human. For both nasal and oral breathing modes in humans, higher uptake rates were predicted for lower tracheobronchial tissues than either the rat or monkey. These extended airway models provide a unique foundation for comparing material transport and site-specific tissue uptake across a significantly greater range of conducting airways in the rat, monkey, and human than prior CFD models.

Magnetic resonance imaging and computational fluid dynamics (CFD) simulations of rabbit nasal airflows for the development of hybrid CFD/PBPK models

The percentages of total airflows over the nasal respiratory and olfactory epithelium of female rabbits were calculated from computational fluid dynamics (CFD) simulations of steady-state inhalation. These airflow calculations, along with nasal airway geometry determinations, are critical parameters for hybrid CFD/physiologically based pharmacokinetic models that describe the nasal dosimetry of water-soluble or reactive gases and vapors in rabbits. CFD simulations were based upon three-dimensional computational meshes derived from magnetic resonance images of three adult female New Zealand White (NZW) rabbits. In the anterior portion of the nose, the maxillary turbinates of rabbits are considerably more complex than comparable regions in rats, mice, monkeys, or humans. This leads to a greater surface area to volume ratio in this region and thus the potential for increased extraction of water soluble or reactive gases and vapors in the anterior portion of the nose compared to many other species. Although there was considerable interanimal variability in the fine structures of the nasal turbinates and airflows in the anterior portions of the nose, there was remarkable consistency between rabbits in the percentage of total inspired airflows that reached the ethmoid turbinate region (approximately 50%) that is presumably lined with olfactory epithelium. These latter results (airflows reaching the ethmoid turbinate region) were higher than previous published estimates for the male F344 rat (19%) and human (7%). These differences in regional airflows can have significant implications in interspecies extrapolations of nasal dosimetry.

Application of Magnetic Resonance (MR) Imaging for the Development and Validation of Computational Fluid Dynamic (CFD) Models of the Rat Respiratory System

Computational fluid dynamic (CFD) models of the respiratory system provide a quantitative basis for extrapolating the localized dose of inhaled materials and improving human health risk assessments based upon inhalation studies conducted in animals. Nevertheless, model development and validation have historically been tedious and time-consuming tasks. In recognition of this, we previously reported on the use of proton (1H) magnetic resonance (MR) imaging for visualizing nasal-sinus passages in the rat, and for speeding computational mesh generation. Here, the generation and refinement of meshes for rat nasal airways are described in more detail and simulated airflows are presented. To extend the CFD models to the complete respiratory tract, three-dimensional (3D) 1H MR imaging of rat pulmonary casts was also utilized to construct pulmonary airway meshes using procedures developed for the nasal airways. Furthermore, the feasibility of validating CFD predictions with MR was tested by imaging hyperpolarized 3He gas at physiological flow rates in a straight pipe with a diameter comparable to the rat trachea. Results from these diverse studies highlight the potential utility of MR imaging not only for speeding CFD development but also possibly for model validation.

An approach to investigating the importance of high potency polycyclic aromatic hydrocarbons (PAHs) in the induction of lung cancer by air pollution

Evidence suggests that people living in urban areas have an increased risk of lung cancer due to higher levels of air pollution in these areas. Benzo[a]pyrene (B[a]P) is currently used as the main indicator of carcinogenic polycyclic aromatic hydrocarbons (PAHs) in air pollution, but there is concern that B[a]P may not be the ideal surrogate of choice for PAH mixtures since higher potency PAHs have recently been identified which could potentially contribute more and variably to the overall carcinogenicity. Dibenzo[a,h]anthracene (DBA) and dibenzo[a,l]pyrene (DB[a,l]P) are estimated to have carcinogenic potencies 10 or more times greater than B[a]P but data on their presence and formation in the environment are limited. Several occupational and environmental PAH biomonitoring studies are reviewed here, with particular focus on the specific exposure groups, study design, sample tissue, in particular the use of nasal tissues, and biomarkers used in each study. Consideration of these data is then used to propose a novel biomonitoring approach to evaluate exposure, uptake and the role of high potency PAHs in air pollution-related lung cancer. This is based upon an occupational study examining specific DNA adducts for DBA and DB[a,l]P in nasal cells to evaluate the extent to which these high potency PAHs might contribute to the increased risk of developing lung cancer from air pollution.