Temperature-sensitive microemulsion gel: an effective topical delivery system for simultaneous delivery of vitamins C and E

Development and Characterization of New Miconazole-Based Microemulsions for Buccal Delivery by Implementing a Full Factorial Design Modeling

This research aimed to develop miconazole-based microemulsions using oleic acid as a natural lipophilic phase and a stabilizer mixture comprising Tween 20 and PEG 400 to solubilize miconazole as an antifungal agent known for its activity in oral candidiasis and to improve its bioavailability. The formulation and preparation process was combined with a mathematical approach using a 23-full factorial plan. Fluid and gel-like microemulsions were obtained and analyzed considering pH, conductivity, and refractive index, followed by extensive analyses focused on droplet size, zeta potential, rheological behavior, and goniometry. In vitro release tests were performed to assess their biopharmaceutical characteristics. Independent variables coded X1-Oleic acid (%, w/w), X2-Tween 20 (%, w/w), and X3-PEG 400 (%, w/w) were analyzed in relationship with three main outputs like mean droplet size, work of adhesion, and diffusion coefficient by combining statistical tools with response surface methodology. The microemulsion containing miconazole base-2%, oleic acid-5%, Tween 20-40%, PEG 400-20%, and water-33% exhibited a mean droplet size of 119.6 nm, a work of adhesion of 71.98 mN/m, a diffusion coefficient of 2.11·10-5 cm2/s, and together with remarked attributes of two gel-like systems formulated with higher oil concentrations, modeled the final optimization step of microemulsions as potential systems for buccal delivery.

Novel Arena of Nanocosmetics: Applications and their Remarkable Contribution in the Management of Dermal Disorders, Topical Delivery, Future Trends and Challenges

Nanocosmetics have attracted a considerable audience towards natural care due to their low cost, target-specific delivery, and reduced toxicity compared to chemical-based cosmetics. Nanofomulations, including nanoemulsions, nanotubes, and polymeric carriers, have become next-generation products explored for the multifaced applications of nanotechnology in skin care. The rise in the cosmetic industry demands innovative and personalized products designed using nanocarriers for better targeting and improving patient compliance. Furthermore, nanocosmetics increase the efficiency of skin permeation active ingredient entrapment, providing better UV protection. Moreover, it offers controlled drug release, targeting active sites and enhancing physical stability. Further, overcoming the drawback of penetration problems makes them sustainable formulations for precision medicine. Skincare nourishment with nanocosmetics using Indian spices helps to maintain, beautify, and rejuvenate human skin. Nanophytopharmaceuticals extracted from plants, including alkaloids, flavonoids, antioxidants, and volatile oils, are essential phyto-products for skin care. Nano herbals and nanocosmetics are a growing market and gift of nature that nourishes and cures skin ailments like acne, pemphigus, anti-aging, albinism, psoriasis, and fungal infections. The emerging concern is highlighted in the investigation of nanoformulation toxicity and safety concerns in skin care. Further, it helps to manifest research, development, and innovation in expanding the scope of herbal industries.

Derivatives of L-Ascorbic Acid in Emulgel: Development and Comprehensive Evaluation of the Topical Delivery System

The dual controlled release of emulgels makes them efficient drug delivery systems of increasing interest. The framework of this study was to incorporate selected L-ascorbic acid derivatives into emulgels. From the formulated emulgels, the release profiles of actives were evaluated considering their different polarities and concentrations, and consequently their effectiveness on the skin via a long-term in vivo study that lasted for 30 days was determined. Skin effects were assessed by measuring the electrical capacitance of the stratum corneum (EC), trans-epidermal water loss (TEWL), melanin index (MI) and skin pH. In addition, the sensory and textural properties of emulgel formulations were compared with each other. The changes in the rate of the release of the L-ascorbic acid derivatives were monitored using the Franz diffusion cells. The obtained data were statistically significant, and indicated an increase in the degree of hydration of the skin and skin whitening potential, while no significant changes in TEWL and pH values were detected. The consistency, firmness and stickiness of the emulgels were estimated by volunteers applying the established sensory evaluation protocol. In addition, it was revealed that the difference in hydrophilic/lipophilic properties of L-ascorbic acid derivatives influenced their release profiles without changing their textural characteristics. Therefore, this study highlighted emulgels as L-ascorbic acid suitable carrier systems and one of the promising candidates as novel drug delivery systems.

Chemical Permeation Enhancers for Topically-Applied Vitamin C and Its Derivatives: A Systematic Review

This paper reports the permeation-enhancing properties and safety of different chemical permeation enhancers (CPEs) on the topical delivery of vitamin C (VC) and its derivatives. A literature search using search keywords or phrases was done in PubMed®, ScienceDirect, and MEDLINE databases. The calculated Log P (cLog P) values were referenced from PubChem and the dermal LD50 values were referenced from safety data sheets. Thirteen studies described the permeation-enhancing activity of 18 identified CPEs in the topical delivery of VC. Correlation analysis between ER and cLog P values for porcine (r = 0.114) and rabbit (r = 0.471) showed weak and moderate positive correlation, while mouse (r = −0.135), and reconstructed human epidermis (r = −0.438) had a negative correlation. The majority (n = 17) of the CPEs belonged to Category 5 of the Globally Harmonized System of Classification or low toxicity hazard. CPEs alone or in combination enhanced permeation (ER = 0.198–106.57) of VC in topical formulations. The combination of isopropyl myristate, sorbitan monolaurate, and polyoxyethylene 80 as CPEs for VC resulted in the highest permeation enhancement ratio.

Monolaurin-Loaded Gel-Like Microemulsion for Oropharyngeal Candidiasis Treatment: Structural Characterisation and In Vitro Antifungal Property

Recently, monolaurin (ML) has received great interest due to its possible use as an alternative antifungal. However, the limited water solubility of ML is still a major obstacle to its formulation and application. Gel-like microemulsions are one of the promising carriers for low-water-solubility substances due to both the advantages of gels and microemulsions and may be applied for ML. In this study, ML was incorporated into gel-like microemulsions and evaluated for its physicochemical and antifungal properties. The results indicated that the properties of gel-like microemulsion changed after the incorporation of ML, suggesting that ML can induce the transition of internal structure. When simulating the oral cavity environment, changes in the microstructure were observed and depended on the times of dilution. The lamellar structure was formed at 1.5-2 times dilution. However, this structure was disrupted after dilution five times or more. The structural change following dilution was associated with the release profiles. After contacting the formulations with the medium, ML was promptly released, with the majority of ML being released within 2 h. Regarding the antifungal assay, the ML-loaded gel-like microemulsions decreased the survival of Candida albicans within 3 h, although ML was immediately released, suggesting that the ML-loaded in oil droplets required time to permeate through the fungal cell wall. Additionally, the gel-like microemulsions possessed acceptable stability after the temperature cycling test. Therefore, gel-like microemulsions can be a possible carrier for ML loading, and ML-loaded gel-like microemulsions may be applied as an alternative antifungal preparation in the future. Graphical abstract.

Polymer-Based Smart Drug Delivery Systems for Skin Application and Demonstration of Stimuli-Responsiveness

Progress in recent years in the field of stimuli-responsive polymers, whose properties change depending on the intensity of a signal, permitted an increase in smart drug delivery systems (SDDS). SDDS have attracted the attention of the scientific community because they can help meet two current challenges of the pharmaceutical industry: targeted drug delivery and personalized medicine. Controlled release of the active ingredient can be achieved through various stimuli, among which are temperature, pH, redox potential or even enzymes. SDDS, hitherto explored mainly in oncology, are now developed in the fields of dermatology and cosmetics. They are mostly hydrogels or nanosystems, and the most-used stimuli are pH and temperature. This review offers an overview of polymer-based SDDS developed to trigger the release of active ingredients intended to treat skin conditions or pathologies. The methods used to attest to stimuli-responsiveness in vitro, ex vivo and in vivo are discussed.

Combination and efficiency: preparation of dissolving microneedles array loaded with two active ingredients and its anti-pigmentation effects on guinea pigs

Hyperpigmentation is a common skin disorder caused by excessive melanogenesis and uneven dispersion of melanin in the skin. To combine multiple active agents with an efficient transdermal drug delivery system is an effective strategy to combat UV induced skin pigmentation. In this work, Arbutin (Arb) and Vitamin C (Vc) mixed in 1:1 were found to have the greatest inhibition effects on melanogenesis and tyrosinase activity in B16 murine melanoma cells. And hyaluronic acid (HA) based dissolving microneedles array (DMNA) was employed to overcome the skin barriers for improved topical drug delivery, which exhibited the most desirable features, including morphology, mechanical properties, dissolving ability, and the highest drug loading. Furthermore, DMNA could greatly increase the stability of Vc during storage without adding any antioxidant which is an important issue for Vc administration. Pharmacodynamics study showed that DMNA loaded with Arb and Vc could synergistically suppress UVB-induced hyperpigmentation in guinea pig skin. This work provides a promising treatment strategy and solution for skin pigmentation and other skin problems.

pH-Responsive Non-Pickering Emulsion Stabilized by Dynamic Covalent Bond Surfactants and Nano-SiO2 Particles

A novel stimulus-responsive non-Pickering emulsion stabilized by nano-SiO₂ particles was prepared in our recent study. 4-formylbenzoic acid and hexylamine through a dynamic covalent bond form a surface-active substance, which was confirmed by Fourier transform infrared (FTIR) and ¹H NMR. Through optimization experiments, it was proved that a stable emulsion can be formed by low surfactant concentration (below cmc) and low nano-SiO₂ particle concentration (0.5 wt %). In this emulsion, nano-SiO₂ particles are not located at the interface of oil-water but dispersed in the continuous phase of the emulsion, which is different from the Pickering emulsion. The negatively charged nano-SiO₂ particles and anionic surfactants repel each other, thereby synergistically stabilizing the emulsion so that the concentrations of surfactants and nanoparticles required to stabilize the emulsion are reduced. In addition, the system can also control the formation and fracture of dynamic covalent bonds by changing pH, thereby controlling the stability and demulsification of the emulsion. At the same time, this non-Pickering emulsion could be used as a microreactor for chemical synthesis and still had a high yield after three cycles. This study provides a new application direction for this environmentally friendly emulsion.

Multifunctional nanoemulsions for intraductal delivery as a new platform for local treatment of breast cancer

Considering that breast cancer usually begins in the lining of the ducts, local drug administration into the ducts could target cancers and pre-tumor lesions locally while reducing systemic adverse effects. In this study, a cationic bioadhesive nanoemulsion was developed for intraductal administration of C6 ceramide, a sphingolipid that mediates apoptotic and non-apoptotic cell death. Bioadhesive properties were obtained by surface modification with chitosan. The optimized nanoemulsion displayed size of 46.3 nm and positive charge, properties that were not affected by ceramide encapsulation (0.4%, w/w). C6 ceramide concentration necessary to reduce MCF-7 cells viability to 50% (EC₅₀) decreased by 4.5-fold with its nanoencapsulation compared to its solution; a further decrease (2.6-fold) was observed when tributyrin (a pro-drug of butyric acid) was part of the oil phase of the nanocarrier, a phenomenon attributed to synergism. The unloaded nanocarrier was considered safe, as indicated by a score <0.1 in HET-CAM models, by the high survival rates of Galleria mellonella larvae exposed to concentrations ≤500 mg/mL, and absence of histological changes when intraductally administered in rats. Intraductal administration of the nanoemulsion prolonged drug localization for more than 120 h in the mammary tissue compared to its solution. These results support the advantage of the optimized nanoemulsion to enable mammary tissue localization of C6 ceramide.

Novel microemulsion-based gels for topical delivery of indomethacin: Formulation, physicochemical properties and in vitro drug release studies

HYPOTHESIS

Microemulsion-based semisolid systems may be considered as an interesting alternative to the traditional dosage forms applied in topical drug delivery. Mechanical properties of topical products are important both in terms of application and dosage form effectiveness. In this study we designed and evaluated novel microemulsion-based gels with indomethacin and analyzed the factors affecting their mechanical characteristics and drug release.

EXPERIMENTS

The impact of the microemulsion composition on the extent of isotropic region was investigated with the use of pseudoternary phase diagrams. Selected microemulsions were analyzed in terms of electrical conductivity and surface tension in order to determine the microemulsion type. Microemulsions were transformed into polymer-based gels and subjected to rheological and textural studies. Finally, the indomethacin release from the analyzed gels was studied and compared to commercially available product.

FINDINGS

The extent of isotropic domain in pseudoternary phase diagrams seems to be dependent on the polarity of the oil phase. The surface tension and conductivity monitored as a function of water content in microemulsion systems revealed possible structural transformations from w/o through bicontinuous systems into o/w. The mechanical properties of semisolid microemulsion-based systems depended on the composition of surface active agents and the drug presence. The drug release profiles observed in the case of the investigated gels differed from those recorded for the commercially available product which was most probably caused by the different structure of both systems.

Potential of Non-aqueous Microemulsions to Improve the Delivery of Lipophilic Drugs to the Skin

In this study, non-aqueous microemulsions were developed because of the challenges associated with finding pharmaceutically acceptable solvents for topical delivery of drugs sparingly soluble in water. The formulation irritation potential and ability to modulate the penetration of lipophilic compounds (progesterone, α-tocopherol, and lycopene) of interest for topical treatment/prevention of skin disorders were evaluated and compared to solutions and aqueous microemulsions of similar composition. The microemulsions (ME) were developed with BRIJ, vitamin E-TPGS, and ethanol as surfactant-co-surfactant blend and tributyrin, isopropyl myristate, and oleic acid as oil phase. As polar phase, propylene glycol (MEPG) or water (MEW) was used (26% w/w). The microemulsions were isotropic and based on viscosity and conductivity assessment, bicontinuous. Compared to drug solutions in lipophilic vehicles, MEPG improved drug delivery into viable skin layers by 2.5-38-fold; the magnitude of penetration enhancement mediated by MEPG into viable skin increased with drug lipophilicity, even though the absolute amount of drug delivered decreased. Delivery of progesterone and tocopherol, but not lycopene (the most lipophilic compound), increased up to 2.5-fold with MEW, and higher amounts of these two drugs were released from MEW (2-2.5-fold). Both microemulsions were considered safe for topical application, but MEPG-mediated decrease in the viability of reconstructed epidermis was more pronounced, suggesting its higher potential for irritation. We conclude that MEPG is a safe and suitable nanocarrier to deliver a variety of lipophilic drugs into viable skin layers, but the use of MEW might be more advantageous for drugs in the lower range of lipophilicity.

The influence of microemulsion structure on their skin irritation and phototoxicity potential

The purpose of this study was to examine skin irritation and phototoxicity potentials of several microemulsions (ME), all comprising approximately the same percentage of surfactant mixture, but varying oil/water content and consequently inner structure being either droplet-like (o/w ME, o/w ME carbomer, w/o ME and w/o ME white wax) or lamellar (gel-like ME). Two different in vitro methods were used: MTT assay (performed either on reconstructed human epidermis (RHE) or NCTC 2544 cells) and pig ear test. Neither assay revealed the difference among ME with droplet-like structure. Then again, pig ear test and MTT assay performed on RHE indicated that gel-like ME is more irritant compared to other tested ME, whereas no difference among formulations were observed by MTT assay on NCTC 2544 cells. The reasonable explanation is destruction and consequently uniform structure of ME upon dilution that is inevitable for testing on cell cultures. The results of phototoxicity test again indicated the increased potential of gel-like ME to cause adverse effects on skin. It can be concluded that for ME consisting of the same amount of identical surfactants but having different structure the latter represent a crucial factor that determines their dermal toxicity.

Characterization of supramolecular gels based on β-cyclodextrin and polyethyleneglycol and their potential use for topical drug delivery

Novel gels were prepared by blending β-cyclodextrin and polyethyleneglycol (PEG) in the presence of K2CO3. The objective of this study was thus to characterize the gels using rheology, modulated temperature differential scanning calorimetry (MTDSC), turbidity measurements, and hot stage microscopy, and then investigate the potential use of the gel for topical drug delivery. Two types of supramolecular gels, GelL and GelH were prepared at a low temperature (below 50 °C) and at a high temperature (above 70 °C), respectively. Both gels were thermo-reversible. Upon heating, GelL could turn to GelH. Nevertheless, upon cooling, GelH that was more stable than GelL precipitated and GelL could not be reformed. GelL may form through simple complexation of polyethyleneglycol (PEG) with β-cyclodextrin in the presence of K2CO3. However, GelH may form a specific complex or a pseudopolyrotaxane gel. For pharmaceutical application, GelL was investigated instead of GelH because the forming temperature of this gel was close to the human body temperature. The interactions among diclofenac sodium (DS), a model drug, and the components of the gel were examined using FTIR. These interactions may include ionic attraction and hydrogen bonds between the carboxylate groups of DS and the hydroxyl groups of PEG or β-cyclodextrin and probably also the inclusion of the aromatic ring of DS into the cavity of β-cyclodextrin. Furthermore, the release and permeation of diclofenac from GelL were significantly greater than those from a commercial gel. Therefore, GelL may be useful for the topical delivery of drugs.

Overcoming the cutaneous barrier with microemulsions

Microemulsions are fluid and isotropic formulations that have been widely studied as delivery systems for a variety of routes, including the skin. In spite of what the name suggests, microemulsions are nanocarriers, and their use as topical delivery systems derives from their multiple advantages compared to other dermatological formulations, such as ease of preparation, thermodynamic stability and penetration-enhancing properties. Composition, charge and internal structure have been reported as determinant factors for the modulation of drug release and cutaneous and transdermal transport. This manuscript aims at reviewing how these and other characteristics affect delivery and make microemulsions appealing for topical and transdermal administration, as well as how they can be modulated during the formulation design to improve the potential and efficacy of the final system.

A critical appraisal of microemulsions for drug delivery: part I

Microemulsions (MEs) are thermodynamically stable, optically transparent isotropic solutions of oil and water successfully formulated by using a combination of suitable surfactant and cosurfactant. While the selection of oil is based primarily on the solubility of drug in it, surfactant is generally selected on the basis of its hydrophilic–lipophilic balance value. MEs are characterized by ultra-low interfacial tension between the immiscible phases and offer the advantage of spontaneous formation, thermodynamic stability and ease of manufacture. The solubilization power of MEs for lipophilic, hydrophilic and amphiphilic solutes form a viable approach for enhancing bioavailability of hydrophobic drugs and percutaneous permeation of poorly permeable drugs, mainly due to the large area to volume ratio available for mass transfer.

Vitamin C in dermatology

Vitamin C is a potent antioxidant drug that can be used topically in dermatology to treat and prevent changes associated with photoageing. It can also be used for the treatment of hyperpigmentation. Because it is unstable and difficult to deliver into the dermis in the optimum dosage, research is being directed to find stable compounds of Vitamin C and newer methods of delivery of Vitamin C into the dermis.

Cutaneous delivery of α-tocopherol and lipoic acid using microemulsions: influence of composition and charge

OBJECTIVES

To assess whether the composition and charge of microemulsions affect their ability to simultaneously deliver α-tocopherol and lipoic acid into viable skin layers.

METHODS

α-Tocopherol and lipoic acid were added (1.1 and 0.5% w/w, respectively) to decylglucoside-based microemulsions containing mono-dicaprylin. Microemulsions containing surfactant : oil : water (w/w/w) at 60 : 30 : 10 (ME-O) and 46 : 23 : 31 (ME-W), as well as a cationic form of ME-W containing 1% phytosphingosine (ME-Wphy) were characterized, and their ability to disrupt the skin barrier and deliver the antioxidants in vitro in the skin was evaluated. Antioxidant activity in ME-Wphy-treated skin was assessed using the thiobarbituric acid-reactive substances (TBARS) assay.

KEY FINDINGS

The internal phase diameters of microemulsions ranged between 42 and 55 nm; phytosphingosine addition and pH adjustment to 5.0 increased zeta potential from -4.3 to +29.1 mV. ME-O displayed w/o structure, whereas ME-W and ME-Wphy were consistent with o/w. Microemulsions affected skin electrical resistance and transepidermal water loss, but did not affect lipoic acid penetration. α-Tocopherol delivery increased following the order ME-O < ME-W < ME-Wphy. ME-Wphy presented suitable short-term stability. The antioxidants delivered by ME-Wphy decreased TBARS cutaneous levels.

CONCLUSIONS

Even though microemulsion structure only affected tocopherol penetration, delivered levels of both antioxidants were sufficient for a decrease in TBARS, supporting their use for enhanced protection.

Formulation and In-vitro Evaluation of Tretinoin Microemulsion as a Potential Carrier for Dermal Drug Delivery

In this study, tretinoin microemulsion has been formulated based on phase diagram studies by changing the amounts and proportions of inactive ingredients, such as surfactants, co-surfactants and oils. The effects of these variables have been determined on microemulsion formation, particle size of the dispersed phase and release profile of tretinoin from microemulsion through dialysis membrane. In released studies, static Franz diffusion cells mounted with dialysis membrane were used. Sampling was conducted every 3 h at room temperature over a period of 24 h. The amount of released drug was measured with UV-spectrophotometer and the percentage of drug released was calculated. Based on the results obtained, the oil phase concentration had a proportional effect on particle size which can consequently influence on drug release. The particle size and the amount of released drug were affected by the applied surfactants. The components of the optimized microemulsion formulation were 15% olive oil, 12% propylene glycol (as co-surfactant), 33% Tween(®)80 (as surfactant) and 40% distilled water, which was tested for viscosity and rheological behavior. The prepared tretinoin microemulsion showed pseudoplastic-thixotropic behavior. The profile of drug release follows zero order kinetics. The optimized tretinoin microemulsion showed enhanced in-vitro release profile compared to the commercial gels and creams.

Niosomes as a propitious carrier for topical drug delivery

INTRODUCTION

Topical delivery is defined as drug targeting to the pathologic sites of skin with the least systemic absorption. Drug localization in this case is a crucial issue. For these purposes vesicular drug delivery systems including niosomes, proniosomes, liposomes and transferosomes have been developed.

AREAS COVERED

This review first highlights the role of niosome in dermatology focusing on localized skin delivery and then reviews the most recent literatures regarding specific applications of niosomal drug delivery systems in clinics.

EXPERT OPINION

Niosomes are becoming popular in the field of topical drug delivery due to their outstanding characteristics like enhancing the penetration of drugs, providing a sustained pattern of drug release, increasing drug stability and ability to carry both hydrophilic and lipophilic drugs.

Protein encapsulation in polymeric microneedles by photolithography

BACKGROUND

Recent interest in biocompatible polymeric microneedles for the delivery of biomolecules has propelled considerable interest in fabrication of microneedles. It is important that the fabrication process is feasible for drug encapsulation and compatible with the stability of the drug in question. Moreover, drug encapsulation may offer the advantage of higher drug loading compared with other technologies, such as drug coating.

METHODS AND RESULTS

In this study, we encapsulated a model protein drug, namely, bovine serum albumin, in polymeric microneedles by photolithography. Drug distribution within the microneedle array was found to be uniform. The encapsulated protein retained its primary, secondary, and tertiary structural characteristics. In vitro release of the encapsulated protein showed that almost all of the drug was released into phosphate buffered saline within 6 hours. The in vitro permeation profile of encapsulated bovine serum albumin through rat skin was also tested and shown to resemble the in vitro release profile, with an initial release burst followed by a slow release phase. The cytotoxicity of the microneedles without bovine serum albumin was tested in three different cell lines. High cell viabilities were observed, demonstrating the innocuous nature of the microneedles.

CONCLUSION

The microneedle array can potentially serve as a useful drug carrier for proteins, peptides, and vaccines.

Decylglucoside-based microemulsions for cutaneous localization of lycopene and ascorbic acid

Cutaneous delivery of combinations of antioxidants offers the possibility of enhanced protection against UV-radiation. In this study, we investigated the potential of sugar-based microemulsions containing monoglycerides to promote simultaneous cutaneous delivery of lycopene and ascorbic acid, and increase tissue antioxidant activity. Lycopene and ascorbic acid were incorporated (0.04% and 0.2% (w/w), respectively) in decylglucoside-based microemulsions containing isopropyl myristate mixed with monocaprylin (ME-MC), monolaurin (ME-ML) or monoolein (ME-MO) as oil phase. The microemulsions increased lycopene delivery into porcine ear skin by 3.3- to 8-fold compared to a drug solution. The effect of microemulsions on ascorbic acid cutaneous delivery was more modest (1.5-3-fold), and associated with an approximately 2-fold increase in transdermal delivery. According to their penetration-enhancing ability, the microemulsions were ranked ME-MC>ME-MO>ME-ML. This superiority of ME-MC coincided with a stronger effect in decreasing skin electrical resistance. After 18 h of treatment, the viability of bioengineered skin treated with ME-MC was 2.2-times higher compared to Triton-X100 (moderate irritant), demonstrating that ME-MC is less cytotoxic. Skin treatment with ME-MC containing both antioxidants increased the tissue antioxidant activity by 10.2-fold, but no synergism between the antioxidants was observed.

Main approaches for delivering antioxidant vitamins through the skin to prevent skin ageing

INTRODUCTION

One of the major contributions to skin photoageing and diseases is oxidative stress, caused by UV radiation inducing reactive oxygen and nitrogen species. Successful prophylaxis and therapy would necessitate control of the oxidant/antioxidant balance at the affected site, which can be achieved through the external supply of endogenous antioxidants.

AREAS COVERED

This review discusses possible strategies for dermal delivery of the antioxidant vitamins E and C, as oral supplementation has proved insufficient. These antioxidants have low skin bioavailability, owing to their poor solubility, inefficient skin permeability, or instability during storage. These drawbacks can be overcome by various approaches, such as chemical modification of the vitamins and the use of new colloidal drug delivery systems. New knowledge is included about the importance of: enhancing the endogenous skin antioxidant defense through external supply; the balance between various skin antioxidants; factors that can improve the skin bioavailability of antioxidants; and new delivery systems, such as microemulsions, used to deliver vitamins C and E into the skin simultaneously.

EXPERT OPINION

A promising strategy for enhancing skin protection from oxidative stress is to support the endogenous antioxidant system, with antioxidants containing products that are normally present in the skin.