Ethyl cellulose microcapsules for protecting and controlled release of folic acid

Encapsulation of Thymol in Ethyl Cellulose-Based Microspheres and Evaluation of Its Sustained Release for Food Applications

Food waste is a global concern with enormous economic, environmental and social impacts that has contributed to active packaging evolution. However, incorporating bioactive substances into the packaging can deteriorate its physicochemical and mechanical characteristics. Thus, the objective of this work was to entrap the natural bioactive compound thymol into microparticles and apply them in the form of pads for the controlled release of bioactivity in food packaging material. The physicochemical characteristics and bioactivity of five different ethyl cellulose-based microparticles were evaluated. Increasing the amount of thymol in the formulation led to higher encapsulation efficiency. Encapsulation resulted in a substantial increase of >10-20 °C in the volatilization temperature of thymol, and the release of thymol occurred following a sustained profile, best described by the Higuchi release kinetic model. Increasing the polymer to thymol ratio in the microparticles resulted in higher thermal stability and a more gradual release profile. While all formulations demonstrated considerable inhibition of E. coli growth, the ones with the highest thymol content maintained their antimicrobial activity for at least one month of microparticle storage. Furthermore, the ability of the microparticles in retaining pH and titratable acidity of cherry tomatoes was evaluated, and it was confirmed that these characteristics were maintained during 21 days of storage.

Nanoparticles mediated folic acid enrichment

Folate is an essential component of many metabolic processes, and folate deficiency is known to cause various disorders. Folate and folic acid, a synthetic and chemically stable form of folate, enriched diet are typically used to overcome this deficiency. Folic acid and folate however, are susceptible to harsh environment and folates enrichment using nanoparticles is an intensively studied strategy in food industry. This review highlights the current methods and types of matrices utilized to develop folic acid/folate carrying nanoparticles. The folic acid/folate loaded nanoparticles prevent cargo degradation during gut absorption and under harsh food processing conditions including, high temperatures, UV light, and autoclaving. The data demonstrates that nanofortifcation of folates using proteins and biopolymers effectively enhances the bioavailability of the cargo. The encapsulation of folic acid in biopolymers by emulsion, spray drying and ionic gelation represent simplistic methods that can be easily scaled up with applications in food industry.

Vitamin B Complex Encapsulation in Bacterial Nanocellulose: A Novel System for Heat and Chemical Stabilization in Food Products

Bacterial nanocellulose has been commonly used as a gelling or stabilizing agent in the food industry and as an excipient in pharmacology. However, due to its physical and chemical properties, such as its high degradation temperature and the ease with which it can interact with other molecules, bacterial nanocellulose has been established as a material with great potential for the protection of bioactive compounds. This research shows the capacity of bacterial nanocellulose to establish interactions with B vitamins (B1, B2, B3 and B12) through different sorption isotherms, mainly by means of the BET, GAB and TSS models. First, the degradation of the vitamin B complex, which mostly occurs upon heating, is minimized in the presence of BNC, herein proposed as a thermal stabilizer. Secondly, BNC is shown to bind to micronutrients and act as dietary fiber. BNC acts as a thickening and water-binding agent. The effects of BNC are determined to occur as an encapsulation system that facilitates affinity adsorption in mono- and multilayers. Finally, bacterial nanocellulose was used as an encapsulating agent for the vitamin B complex by spray drying. It is demonstrated that BNC is a very successful new nanomaterial for encapsulation, with a high level of adsorption, and for the protection of hydro-soluble vitamins. BNC has shown great potential to adsorb vitamins B1, B2, B3 and B12 owing to their hydroxyl groups, which are responsible for its water or vitamin sorption. Due to the features of bacterial nanocellulose, it is possible to use it as a raw material in the food industry to protect micronutrients during the thermal process.

Carbon-Based Composites with Biodegradable Matrix for Flexible Paper Electronics

The authors explore the development of paper-based electronics using carbon-based composites with a biodegradable matrix based on ethyl cellulose and dibasic ester solvent. The main focus is on screen-printing techniques for creating flexible, eco-friendly electronic devices. This research evaluates the printability with the rheological measurements, electrical properties, flexibility, and adhesion of these composites, considering various compositions, including graphene, graphite, and carbon black. The study finds that certain compositions offer sheet resistance below 1 kΩ/sq and good adhesion to paper substrates with just one layer of screen printing, demonstrating the potential for commercial applications, such as single-use electronics, flexible heaters, etc. The study also shows the impact of cyclic bending on the electrical parameters of the prepared layers. This research emphasizes the importance of the biodegradability of the matrix, contributing to the field of sustainable electronics. Overall, this study provides insights into developing environmentally friendly, flexible electronic components, highlighting the role of biodegradable materials in this evolving industry.

In vitro bioaccessibility and intestinal transport of retinoic acid in ethyl cellulose-based microparticles and impact of meal co-ingestion

The development of carrier-based delivery systems for oral administration of retinoic acid (RA), that provides its release and absorption at intestinal level, is of major relevance in the treatment of acute promyelocytic leukemia. The aim of this work was to evaluate RA bioaccessibility and intestinal transport on ethyl cellulose (EC)- and EC + polyethylene glycol (ECP)-based microparticles and to understand the impact of meal co-ingestion by applying in vitro assays. RA-loaded microparticles were produced by spray-drying with an encapsulation efficiency higher than 90 % for both formulations. The gastric bioaccessibility of RA (after in vitro static digestion of RA-loaded particles) was lower than 3 % for both types of microparticles, with and without meal co-ingestion. Whereas after intestinal digestion, RA bioaccessibility was significantly higher and affected by the type of microparticles and the presence of meal. The digestion of EC- and ECP-based microparticles without diet enabled a significantly higher bioaccessibility of RA when compared to the one recorded for the co-digestion of these microparticles with diet. Herein, RA bioaccessibility decreased from 84 ± 1 to 24 ± 6 % (p < 0.0001) for microparticles EC and 54 ± 4 to 25 ± 5 % (p < 0.001) for microparticles ECP. Moreover, comparing both types of microparticles, RA bioaccessibility was significantly higher for EC-based microparticles digested without diet (p < 0.0001). At last, the bioaccessibility of RA was similar among EC- and ECP-based microparticles when co-digested with diet. Intestinal transport experiments performed in Caco-2 monolayers evidenced that after 2 h of transport the amount of RA retained in the apical compartment was higher than the amount that reached the basolateral compartment evidencing a slow transport at intestinal level that was higher when RA is spiked in the blank of digestion and the meal digestion samples compared to RA dissolved in HBSS (44 ± 6 (p < 0.01) and 38 ± 1 (p < 0.05) vs 26 ± 2 %, respectively).

Is there a difference between surfactant-stabilised and Pickering emulsions?

What measurable physical properties allow one to distinguish surfactant-stabilised from Pickering emulsions? Whereas surfactants influence oil/water interfaces by lowering the oil/water interfacial tension, particles are assumed to have little effect on the interfacial tension. Here we perform interfacial tension (IFT) measurements on three different systems: (1) soybean oil and water with ethyl cellulose nanoparticles (ECNPs), (2) silicone oil and water with the globular protein bovine serum albumin (BSA), and (3) sodium dodecyl sulfate (SDS) solutions and air. The first two systems contain particles, while the third system contains surfactant molecules. We observe a significant decrease in interfacial tension with increasing particle/molecule concentration in all three systems. We analyse the surface tension data using the Gibbs adsorption isotherm and the Langmuir equation of state for the surface, resulting in surprisingly high adsorption densities for the particle-based systems. These seem to behave very much like the surfactant system: the decrease in tension is due to the presence of many particles at the interface, each with an adsorption energy of a few k_BT. Dynamic interfacial tension measurements show that the systems are in equilibrium, and that the characteristic time scale for adsorption is much longer for particle-based systems than for surfactants, in line with their size difference. In addition, the particle-based emulsion is shown to be less stable against coalescence than the surfactant-stabilised emulsion. This leaves us with the conclusion that we are not able to make a clear distinction between the surfactant-stabilised and Pickering emulsions.

Application of Ethyl Cellulose and Ethyl Cellulose + Polyethylene Glycol for the Development of Polymer-Based Formulations using Spray-Drying Technology for Retinoic Acid Encapsulation

Ethyl cellulose (EC)-based microparticles, with and without the incorporation of polyethylene glycol (PEG) as a second encapsulating agent, were prepared using the spray-drying process for the encapsulation of retinoic acid (RA). The production of a suitable controlled delivery system for this retinoid will promote its antitumor efficiency against acute promyelocytic leukemia (APL) due to the possibility of increasing the bioavailability of RA. Product yield ranged from 12 to 28% in all the microparticle formulations, including unloaded microparticles and RA-loaded microparticles. Microparticles with a mean diameter between 0.090 ± 0.002 and 0.54 ± 0.02 µm (number size distribution) and with an irregular form and rough surface were obtained. Furthermore, regarding RA-loaded microparticles, both polymer-based formulations exhibited an encapsulation efficiency of around 100%. A rapid and complete RA release was reached in 40 min from EC− and EC + PEG-based microparticles.

Enhanced cellular uptake, transport and oral bioavailability of optimized folic acid-loaded chitosan nanoparticles

Folic acid is a synthetic form of folate widely used for food fortification. However, its bioavailability is limited due to its inherent instability at several conditions. Therefore, a suitable encapsulation system is highly required. In the present study, the fabrication condition for folic acid-loaded chitosan nanoparticle (FA-Chi-NP) was optimized and then subjected to characterization. The optimized formulation had the particle size, zeta potential, and encapsulation efficiency of 180 nm, +52 mV, and 90%, respectively. In vitro release profile showed a controlled release of folic acid from the nanoparticles. Treatment of Caco-2 cells with the formulation showed no adverse effects based on MTT and LDH assays, and also, the cellular uptake was significantly higher after 2 h compared to free folic acid. Further, the oral administration of rats with FA-Chi-NPs (1 mg/kg BW) increased the plasma level of both folic acid (3.2-fold) and its metabolites such as tetrahydrofolate (2.3-fold) and 5-methyltetrahydrofolate (1.6-fold) significantly compared to free folic acid. In a bio-distribution study, duodenum and jejunum were found to be the primary sites for absorption. These findings suggest that chitosan may be a promising carrier for the delivery of folic acid and, therefore, could be exploited for various food applications.

Encapsulation of folic acid (vitamin B9) into sporopollenin microcapsules: Physico-chemical characterisation, in vitro controlled release and photoprotection study

Folic acid (FA) is a crucial vitamin for all living creatures. However, it is susceptible to degradation under pH, heat, ultraviolet (UV) and day sunlight conditions, resulting in lowering its bioavailability. Therefore, a versatile protective encapsulation system for FA is highly required to overcome its inherent instability. We report the use of the robust Lycopodium clavatum sporopollenin (LCS) microcapsules, extracted from their natural micrometer-sized raw spores, for FA microencapsulation. The physico-chemical characterisation of the LCS microcapsules are comprehensively investigated before and after the microencapsulation using SEM, elemental, CLSM, FTIR, TGA/DTG and XRD analyses, revealing a successful FA encapsulation within the LCS in an amorphous form. The phenylpropanoid acids, responsible for the UV protection and the autofluorescence of the LCS, were found in the LCS as evidenced by FTIR analysis. TGA/DTG results revealed that the hemi-cellulose and cellulose are the major component of the LCS. A controlled and sustained release of FA from FA-loaded LCS were achieved where the release profile of FA-loaded LCS was found to be pH-dependent. The percentages of cumulative FA released after 10 h at 37 ± 0.5 °C were 45.5% and 76.1% in pH 1.2 and 7.4, respectively, ensuring controlled and slow release in simulated physiological conditions. The FA release kinetic studies indicated the prevalence of the Fickian diffusion mechanism in pH 1.2, while anomalous non-Fickian transport was ascribed for FA release in pH 7.4. The in vitro cytotoxicity assay revealed that the obtained formulations were biocompatible against the human skin fibroblast (HSF) cell line. The versatile LCS microcapsules exhibited intriguing photostability for FA under UV or sunlight irradiation. Concretely, the obtained FA sustained delivery and photoprotection properties of these LCS microcapsules validate their multifunctional characteristics, opening up intriguing applications in oral and topical drug delivery as well as in food industry.

Functional and Oxidative Quality Characterization of Spray-Dried Omega-3-Enriched Milk Powder

In the present study, fish oil (FO) and wall material were supplemented to milk to produce spray-dried powder (SDP). Furthermore, the mandate of the study was to enlighten the effect of spray-drying (SD) operating conditions on functional and oxidative quality of produced SDP samples. Purposefully, the cow milk was supplemented with 3% FO as omega-enriched source of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) for development of milk and FO blends (MFOBs). The lecithin was used as an emulsifier and maltodextrin was supplemented as the wall material (WM) in the MFOBs. Initially, the FO, milk fat (MF), and MFOB samples were characterized for EPA, DHA, and peroxide value (PV) before the SD. The SD of MFOB samples was carried out to produce SDP samples by using a mini spray dryer. Central composite design (CCD) with face-centered rotation was used to optimize SD independent conditions such as inlet air temperature (IAT), pump speed (PS), maltodextrin percentage (MD), and needle speed (NS) in the ranges of 160–200°C, 3–9 mL/min, 10–30%, and 5–9 s, respectively. The encapsulation efficiency (EE) ranged between 89.30 and 81.57%. The EPA and DHA retentions were in the ranges of 2.19–1.87 g/100 g and 3.20–2.75 g/100 g, respectively. The highest results for responses were observed on the following conditions: IAT was 160°C, PS was 9 mL/min, MD was 30%, and NS was 9 s, respectively; the minimum values of response factors were obtained on the following conditions: IAT was 200°C, PS was 3 mL/min, MD was 10%, and NS was 5 s, respectively. The percent losses of EPA and DHA were noted in the range of 2–18%. The IAT was observed as main factor for FA reduction in SDP samples. The SDP samples were stable, and low rate of peroxide values was noted. Overall, spray drying can be potentially used to incorporate the essential fatty acids in milk to produce stable SDP for food applications.

Development and Application of a Modified Method to Determine the Encapsulation Efficiency of Proteins in Polymer Matrices

A modified method to determine protein encapsulation efficiency in polymer matrices has been developed and applied to two proteins and two polymers to demonstrate its wide range of applicability. This study was pursued due to the wide variation in reported protein encapsulation efficiency of polymer-based microcapsules, even when the protein, the polymer, and the microcapsule manufacturing method were consistent. Hemoglobin (Hb) and bovine serum albumin (BSA) were chosen as model proteins and ethylcellulose and poly(lactic-co-glycolic acid) (PLGA) as model polymers. The polymer of the microcapsule was dissolved in dichloromethane/ethanol or dichloromethane/ethyl acetate for ethylcellulose or PLGA microcapsules, respectively. Liberated proteins were simultaneously precipitated, pelleted by centrifugation, isolated by decanting the polymer solution, redissolved in 10% w/v sodium dodecyl sulfate in 0.8 N sodium hydroxide, and quantified using a modified Lowry assay. Blank microcapsules and exogenously added proteins demonstrated ≥ 93.8% recovery of proteins. The mean encapsulation efficiency of ethylcellulose or PLGA microcapsules was 52.4 or 76.9% for Hb and 86.4 or 74.7% for BSA, respectively. This demonstrates the effective use of centrifugation and the importance of an appropriate cosolvent system in the measure of encapsulation efficiency where one solvent dissolves the polymer while the other solvent quantitatively precipitates the liberated protein. It is evident that an alkaline solution of sodium dodecyl sulfate is efficient at quantitatively dissolving precipitated proteins. Remediation of problems observed with current methods and high reproducibility suggest that this modified method is generally applicable to the measure of protein encapsulation efficiency of polymer microcapsules.

Potential effects of alginate-pectin biocomposite on the release of folic acid and their physicochemical characteristics

Potential effects of folates on the treatment of several human diseases like cognitive function, neural tube defects, coronary heart disease and certain kinds of cancers have been discovered. However, the stability of folic acid against adverse conditions is a great concern. The present study investigates various alginate (A)-pectin (P) gastrointestinal-resistant hydrogel to immobilize folic acid. This involves evaluating different compositions of alginate-pectin to achieve higher encapsulation efficiency and stability during simulated gastric (SG) and simulated intestinal (SI) conditions. Coated alginate hydrogels with pectin resulted significant (p < 0.05) better protection of folic acid compared to non-coated alginate hydrogel when exposed to SG condition and when exposed to SI condition, sustained release behavior obtained with the ratio of A70-P30. The structural and physicochemical properties of blended A-P hydrogel were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffractometer, indicating the presence of folic acid into the matrix and signified no covalent reaction between components. Therefore, this adequate composition of alginate-pectin showed to be a potential carrier for folic acid stability.

Thermal protection and pH-gated release of folic acid in microparticles and nanoparticles for food fortification

Dispersed folic acid was successfully encapsulated in alginate–pectin hydrogels, proliposomes, and combinations thereof, providing an efficient pH-responsive delivery system.

One-component waterborne in vivo cross-linkable polysiloxane coatings for artificial skin

Polysiloxane-based artificial skins are able to emulate the mechanical and barrier performance of human skin. However, they are usually fabricated in vitro, restricting their diverse applications on human body. Herein, we presented one-component waterborne cross-linkable polysiloxane coatings prepared from emulsified vinyl dimethicone, emulsified hydrogen dimethicone, and Karstedt catalyst capsules that were first synthesized by solvent evaporation method. The coating had good storage stability and meanwhile could form an elastic film quickly through merging of silicone oil droplets and subsequent hydrosilylation reaction. It was found that the mass ratio of vinyl dimethicone emulsion/hydrogen dimethicone emulsion (V/H), and the dosage of Karstedt catalyst capsules (K/(V + H)) were critical to the curing time, morphology, and mechanical properties of the coatings. With appropriate values of V/H and K/(V + H), the polysiloxane film had the mechanical performance comparable to that from solvent-based one. The coating could be topically applied to human skin in vivo and in situ turned into an elastic, invisible thin film with good water resistance. In contrast to those reported polysiloxane materials, the one-component waterborne polysiloxane coating was nontoxic and convenient for in vivo application on human body, making it be a promising candidate as artificial skin in the fields of cosmetics, medical treatment, and E-skin.

Periodate-Modified Gum Arabic Cross-linked PVA Hydrogels: A Promising Approach toward Photoprotection and Sustained Delivery of Folic Acid

The chemically oxidized gum arabic was prepared and used as a naturally derived nontoxic and pH-responsive cross-linker to develop smart polyvinyl alcohol (PVA)-based hydrogels for the first time. The formulated hydrogels exhibited high mechanical properties, good porosity, and pH sensitivity, which facilitated their application as promising biomaterials for sustained delivery of folic acid. Further, the synthesized cross-linked PVA hydrogels displayed no cytotoxicity toward the human embryonic kidney cell line and exhibited higher blood compatibility. The hydrolytic degradation study confirmed their biodegradable nature. While the sustained delivery along with photoprotective properties of these hydrogels confirmed their multifunctional characteristics, these results suggest that these hydrogels may act as an efficient photoprotective material and find their application in the field of drug delivery.

Recent progress in preparation and agricultural application of microcapsules

Recent advances in life science technology have prompted the need to develop microcapsule delivery systems that can encapsulate many different functional or active materials such as drugs, peptides, and live cells, etc. The encapsulation technology is now commonly used in medicine, agriculture, food, and other many fields. The application of biodegradable microcapsule systems can not only effectively prevent the degradation of core materials in the body or the biological environment, but also improve the bioavailability, control the release and prolong the halftime or storage of core active materials. Various wall materials, preparation methods, encapsulation processes, and release mechanisms are covered in this review, as well as several main factors including pH values, temperatures, particle sizes, and additives, which can strongly influence the encapsulation efficiency, the strength, and release of microcapsules. The improvement of coating materials, preparation techniques, and challenges are also highlighted, as well as application prospects.

Three-Dimensional Nano-Morphology of Carbon Nanotube/Epoxy Filled Poly(methyl methacrylate) Microcapsules

The three-dimensional nano-morphology of poly(methyl methacrylate; PMMA) microcapsules filled with carbon nanotubes (CNTs) and epoxy resin were investigated by various microscopy methods, including a novel, laser scanning confocal microscopy (LSCM) method. Initially, PMMA microcapsules containing various amounts of CNTs were synthesized by a solvent evaporation method. Scanning electron microscopy analysis showed that pore-free, smooth-surface microcapsules formed with various types of core-shell morphologies. The average size of CNT/epoxy/PMMA microcapsules was shown to decrease from ~52 μm to ~15 μm when mixing speed during synthesis increased from 300 rpm to 1000 rpm. In general, the presence of CNTs resulted in slightly larger microcapsules and higher variations in size. Moreover, three-dimensional scans obtained from confocal microscopy revealed that higher CNT content increased the occurrence and size of CNT aggregates inside the microcapsules. Entrapped submicron air bubbles were also observed inside most microcapsules, particularly within those with higher CNT content.

Ultrahigh verapamil-loaded controlled release polymeric beads using superamphiphobic substrate: D-optimal statistical design, in vitro and in vivo performance

Controlled-release multiparticulate systems of hydrophilic drugs usually suffer from poor encapsulation and rapid-release rate. In the present study, ultra-high loaded controlled release polymeric beads containing verapamil hydrochloride (VP) as hydrophilic model drug were efficiently prepared using superamphiphobic substrates aiming to improve patient compliance by reducing dosing frequency. Superamphiphobic substrates were fabricated using clean aluminum sheets etched with ammonia solution and were treated with 1.5% (w/v) perfluorodecyltriethoxysilane (PFDTS) alcoholic solution. The effect of the main polymer type (lactide/glycolide (PLGA) 5004A, PLGA 5010, and polycaprolactone (PCL)), copolymer (Eudragit RS100) content together with the effect of drug load on encapsulation efficiency (EE%) and in vitro drug release was statistically studied and optimized via D-optimal statistical design. In vivo pharmacokinetic study was carried out to compare the optimized system relative to the market product (Isoptin®). Results revealed that superamphiphobic substrates were successfully prepared showing a rough micro-sized hierarchical structured surface upon observing with scanning electron microscope and were confirmed by high contact angles of 151.60 ± 2.42 and 142.80°±05.23° for water and olive oil, respectively. The fabricated VP-loaded beads showed extremely high encapsulation efficiency exceeding 92.31% w/w. All the prepared systems exhibited a controlled release behavior with Q12 h ranging between 5.46 and 95.90%w/w. The optimized VP-loaded system composed of 150 mg (1.5% w/v) PCL without Eudragit RS100 together with 160 mg VP showed 2.7-folds mean residence time compared to the market product allowing once daily administration instead of three times per day.

Encapsulation of Theophylline in Gelatin A-Pectin Complex Coacervates

The present study aims at synthesizing gelatin A-pectin complex coacervates and encapsulation of theophylline in the polymer system. Variation and optimization of different reaction parameters such as pH, ratio between the polymers and cross-linker concentration was carried out to attain higher product yield. Relative viscosity, turbidity and UV-visible measurements were done for optimization. The optimum ratio between gelatin A-pectin was fixed at weight ratio 42:8 and pH=3.5. It was further observed that adhesion between the microcapsules decreased by the use of sodium carboxymethyl cellulose (SCMC) to the coacervate. The synthesized microcapsules were characterized by using spectroscopic techniques to assess their formation, drug loading and chemical interaction between theophylline and coacervate. Scanning electron microscopy (SEM) revealed the formation of microcapsules. Study relating to the encapsulation efficiency and swelling of the complex coacervates were also carried out.

Peculiar effect of polyethylene glycol in comparison with triethyl citrate or diethyl phthalate on properties of ethyl cellulose microcapsules containing propranolol hydrochloride in process of emulsion-solvent evaporation

Plasticizers play a crucial role in various process of microencapsulation. In this study, the effect of incorporation of plasticizer in process of emulsion solvent evaporation was investigated on properties of ethyl cellulose (EC) microcapsules containing propranolol hydrochloride. The effect of plasticizer type and concentration were investigated on characteristics of microcapsules prepared from different viscosity grades of EC. Product yield, encapsulation efficiency, mean particle size, shape, surface characteristics, solid state of drug, and drug release profiles were evaluated. Product yield and encapsulation efficiency were not dependent on plasticizer type and concentration. However, encapsulation efficiency decreased with increase in EC viscosity grade in the most of the cases. The mean particle size was in the range of 724-797 μm and was not dependent on plasticizer type. Microcapsules formed in the presence of PEG had a very smooth surface with few pores. XRD and DSC studies revealed a reduction of drug crystallinity after microencapsulation especially in presence of PEG. The results showed that the presence of TEC and DEP with different concentrations had no marked effect on drug release from microcapsules containing different viscosity grades of EC. This was not the case when PEG was used, and despite its water solubility it reduced the drug release rate noticeably. The reduction in the drug release in the presence of PEG was concentration-dependent. The use of PEG as a plasticizer in process of emulsion solvent evaporation highly improved the EC microcapsule structure and retarded the drug release rate and therefore is recommended.

Supercritical antisolvent co-precipitation of rifampicin and ethyl cellulose

Rifampicin-loaded submicron-sized particles were prepared through supercritical anti-solvent process using ethyl cellulose as polymeric encapsulating excipient. Ethyl acetate and a mixture of ethyl acetate/dimethyl sulfoxide (70/30 and 85/15) were used as solvents for both drug and polymeric excipient. When ethyl acetate was used, rifampicin was crystallized separately without being embedded within the ethyl cellulose matrix while by using the ethyl acetate/dimethyl sulfoxide mixture, reduced crystallinity of the active ingredient was observed and a simultaneous precipitation of ethyl cellulose and drug was achieved. The effect of solvent/CO₂ molar ratio and polymer/drug mass ratio on the co-precipitates morphology and drug loading was investigated. Using the solvent mixture, co-precipitates with particle sizes ranging between 190 and 230nm were obtained with drug loading and drug precipitation yield from respectively 8.5 to 38.5 and 42.4 to 77.2% when decreasing the ethyl cellulose/rifampicin ratio. Results show that the solvent nature and the initial drug concentrations affect morphology and drug precipitation yield of the formulations. In vitro dissolution studies revealed that the release profile of rifampicin was sustained when co-precipitation was carried out with the solvent mixture. It was demonstrated that the drug to polymer ratio influenced amorphous content of the SAS co-precipitates. Differential scanning calorimetry thermograms and infrared spectra revealed that there is neither interaction between rifampicin and the polymer nor degradation of rifampicin during co-precipitation. In addition, stability stress tests on SAS co-precipitates were carried out at 75% relative humidity and room temperature in order to evaluate their physical stability. SAS co-precipitates were X-ray amorphous and remained stable after 6months of storage. The SAS co-precipitation process using a mixture of ethyl acetate/dimethyl sulfoxide demonstrates that this strategy can be successful for controlling rifampicin delivery.

Microencapsulation of Ginger Volatile Oil Based on Gelatin/Sodium Alginate Polyelectrolyte Complex

The coacervation between gelatin and sodium alginate for ginger volatile oil (GVO) microencapsulation as functions of mass ratio, pH and concentration of wall material and core material load was evaluated. The microencapsulation was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and thermal gravimetric analysis (TGA). SEM and FT-IR studies indicated the formation of polyelectrolyte complexation between gelatin and sodium alginate and successful encapsulation of GVO into the microcapsules. Thermal property study showed that the crosslinked microparticles exhibited higher thermal stability than the neat GVO, gelatin, and sodium alginate. The stability of microencapsulation of GVO in a simulated gastric and an intestinal situation in vitro was also studied. The stability results indicated that the release of GVO from microcapsules was much higher in simulated intestinal fluid, compared with that in simulated-gastric fluid.

Monodisperse aqueous microspheres encapsulating high concentration of l-ascorbic acid: insights of preparation and stability evaluation from straight-through microchannel emulsification

Stabilization of l-ascorbic acid (l-AA) is a challenging task for food and pharmaceutical industries. The study was conducted to prepare monodisperse aqueous microspheres containing enhanced concentrations of l-AA by using microchannel emulsification (MCE). The asymmetric straight-through microchannel (MC) array used here constitutes 11 × 104 μm microslots connected to a 10 μm circular microholes. 5–30% (w/w) l-AA was added to a Milli-Q water solution containing 2% (w/w) sodium alginate and 1% (w/w) magnesium sulfate, while the continuous phase constitutes 5% (w/w) tetraglycerol condensed ricinoleate in water-saturated decane. Monodisperse aqueous microspheres with average diameters (dav) of 18.7–20.7 μm and coefficients of variation (CVs) below 6% were successfully prepared via MCE regardless of the l-AA concentrations applied. The collected microspheres were physically stable in terms of their dav and CV for &gt;10 days of storage at 40°C. The aqueous microspheres exhibited l-AA encapsulation efficiency exceeding 70% during the storage.

Effects of Ionic Strength on the Colloidal Stability and Interfacial Assembly of Hydrophobic Ethyl Cellulose Nanoparticles

Nanoparticle attachment at a fluid interface is a process that often takes place concurrently with nanoparticle aggregation in the bulk of the suspension. Here we investigate systematically the coupling of these processes with reference to the adsorption of aqueous suspensions of ethyl cellulose (EC) nanoparticles at the air-water interface. The suspension stability is optimal at neutral pH and in the absence of salt, conditions under which the electrostatic repulsion among EC nanoparticles is maximized. Nonetheless, hydrophobic attraction dominates particle-interface interactions, resulting in the irreversible adsorption of EC nanoparticles at the air-water interface. The addition of salt weakens the particle-particle and particle-interface repulsive electrostatic forces. This leads to destabilization of the suspension at ionic strengths of 0.05 M or greater but does not affect nanoparticle adsorption. The energy of adsorption, the surface tension and interface coverage at steady state, and the particle contact angle at the interface all remain unchanged by the addition of salt. These findings contribute to the fundamental understanding of colloidal systems and inform the utilization of EC nanocolloids, in particular for the stabilization of foams and emulsions.

Microencapsulation of bioactives for food applications

The potential of microencapsulation to protect bioactive compounds ensuring bioavailability maintenance is proved but requires further studies on its applicability and incentives by regulatory agencies.

Realgar nanoparticle-based microcapsules: preparation and in-vitro/in-vivo characterizations

Objectives

The aim of this study was to prepare microcapsules for the oral delivery of realgar nanoparticles (RN) that are also capable of improving its stability.

Methods

RN and RN-based microcapsules (RNM) were prepared using ball milling and solvent evaporation techniques, respectively. Properties such as particle size, ζ-potential (ZP), morphology and X-ray diffractometer (XRD) were investigated. In addition, drug release, bioavailability and antitumour studies were also performed.

Key findings

The nanoparticles appeared round or elliptical in shape with a mean size of 85.4 ± 3.5 nm and a ZP of −34.3 ± 1.7 mV. The obtained RNM appeared spherical and not aggregated with a relatively narrow size distribution. XRD analysis revealed that ball milling technique did not change the crystallinity of the realgar powder. RN and RNM exhibited considerable higher release of As2S2, bioavailability and antitumour efficacies compared with crude realgar. Furthermore, RNM could protect RN directly exposed to the air and light, and therefore increased the stability of the RN.

Conclusions

The developed RNM demonstrated a greater potential as a delivery system for realgar.

Surelease or organic solution of ethylcellulose in preparation of sustained release theophylline micromatrices or matrices using spray drying technique

This study evaluated ethylcellulose (EC) in two forms in preparation of sustained release theophylline microparticles using spray drying. Spray dried (SD) samples at different drug:polymer ratios were prepared using Surelease (SDaq) or organic solutions of ethylcellulose (SDor). Properties of particles (yield, particle morphology, size distribution and release profiles) were examined. Differential scanning calorimetry (DSC) and infrared spectroscopy (IR) studies were performed to track polymorphic changes and/or drug polymer interactions. SD samples were compressed and crushing strengths and release profiles were determined. The yields were in the range of 55-70%. The SD samples were nearly spherical with numerous fine particles attached to their surfaces. The SDor samples showed the smallest particle size. No polymorphism or drug-polymer interaction was observed. Uncompressed SDaq samples showed inadequate sustained release of drug compared to SDor samples. Surelease content did not affect drug release from SDaq samples. Tablets prepared from SDaq were softer and showed some plasticity, while those prepared from SDor exhibited higher crushing strengths. Tablets prepared from SDaq showed sustained release properties while the release of drug from compressed SDor samples were too slow. Overall Surelease was unable to sustain release of theophylline from SDaq microparticles, however, in compacted form showed more appropriate drug release than compacted SDor.