Formulation and in vitro characterization of Eudragit® L100 and Eudragit® L100-PLGA nanoparticles containing diclofenac sodium

Premix technologies for drug delivery: manufacturing, applications, and opportunities in regulatory filing

Active pharmaceutical ingredients (APIs) and excipients can be carefully combined in premix-based materials before being added to dosage forms, providing a flexible platform for the improvement of drug bioavailability, stability, and patient compliance. This is a promising and transformative approach in novel and generic product development, offering both the potential to overcome challenges in the delivery of complex APIs and viable solutions for bypassing patent hurdles in generic product filing. We discuss the different types of premixes; manufacturing technologies such as spray drying, hot melt extrusion, wet granulation, co-crystal, co-milling, co-precipitation; regulatory filing opportunities; and major bottlenecks in the use of premix materials in different aspects of pharmaceutical product development.

Formulation of Budesonide-Loaded Polymeric Nanoparticles into Hydrogels for Local Therapy of Atopic Dermatitis

Budesonide is a mineral corticoid applied in the local therapy of pediatric atopic dermatitis. Unfortunately, its dermal administration is hindered by the concomitant adverse effects and its physicochemical properties. The characteristic pH change in the atopic lesions can be utilized for the preparation of a pH-sensitive nanocarrier. In this view, the formulation of Eudragit L 100 nanoparticles as a budesonide delivery platform could provide more efficient release to the desired site, improve its penetration, and subsequently lower the undesired effects. In this study, budesonide-loaded Eudragit L100 nanoparticles were prepared via the nanoprecipitation method (mean diameter 57 nm, -31.2 mV, and approx. 90% encapsulation efficiency). Their safety was proven by cytotoxicity assays on the HaCaT keratinocyte cell line. Further, the drug-loaded nanoparticles were incorporated into two types of hydrogels based on methylcellulose or Pluronic F127. The formulated hydrogels were characterized with respect to their pH, occlusion, rheology, penetration, spreadability, and drug release. In conclusion, the developed hydrogels containing budesonide-loaded nanoparticles showed promising potential for the pediatric treatment of atopic dermatitis.

Assessment of In Vitro Release Testing Methods for Colloidal Drug Carriers: The Lack of Standardized Protocols

Although colloidal carriers have been in the pipeline for nearly four decades, standardized methods for testing their drug-release properties remain to be established in pharmacopeias. The in vitro assessment of drug release from these colloidal carriers is one of the most important parameters in the development and quality control of drug-loaded nano- and microcarriers. This lack of standardized protocols occurs due to the difficulties encountered in separating the released drug from the encapsulated one. This review aims to compare the most frequent types of release testing methods (i.e., membrane diffusion techniques, sample and separate methods and in situ detection techniques) in terms of the advantages and disadvantages of each one and of the key parameters that influence drug release in each case.

Fabrication and Synthesis of Thiococlchicoside Loaded Matrix Type Transdermal Patch

BACKGROUND

The goal of this work was to synthesize and fabricate matrix type transdermal patches based on a combination of polymers (Eudragit L100, HPMC and PVP K30), plasticizer and crosslinking agents (propylene glycol and triethyl citrate) and adhesives (Dura Tak 87-6908) to increase Thiocolchicoside (THC) absorption via topical route. This method allows avoidance of first-pass metabolism along with a consistent and extended duration of therapeutic activity.

METHODS

Fabrication and casting of polymeric solutions containing THC was done either in petri plates or through lab coater to get transdermal patches. Finally, the formulated patches were studied for their physicochemical and biological evaluation using scanning electron microscopy, FTIR, DSC, XRD and ex-vivo permeation studies using pig ear skin.

RESULTS

FTIR studies confirm that the THC characteristics peaks (carbonyl (Amide I) at 1525.5 cm-1, C=O stretching (tropane ring) at 1664.4 cm-1, Amide II band (N-H stretching) at 3325.9 cm-1, thioether band at 2360.7 cm-1, and OH group stretching band at 3400.2 cm-1) are still present in the polymer mixture even after formulation as a transdermal patch, indicating compatibility among all excipients. While on the other hand, DSC studies confirm endothermic peaks for all the polymers along with THC with the highest enthalpy of 65.979 J/g, which is an indicator of sharp endothermic peak at 198°C, leading to the melting of THC. The percentage drug content and percentage moisture uptake of all the formulation was found in the range of 96 ± 2.04 to 98.56 ± 1.34% and 4.13 ± 1.16 to 8.23 ± 0.90%, respectively. Drug release and release kinetics studies confirm that it is dependent on the composition of individual formulation.

CONCLUSION

All these findings support the possibility of using suitable polymeric composition, as well as proper formulation and manufacturing circumstances, to create a one-of-a-kind technology platform for transdermal drug administration.

Formulation and optimization of theophylline-loaded enteric-coated spanlastic nanovesicles for colon delivery; Ameliorate acetic acid-induced ulcerative colitis

Treatment of colon diseases presents one of the most significant obstacles to drug delivery due to the inability to deliver sufficient drug concentration selectively to the colon. The goal of the proposed study was to develop, optimize, and assess an effective colon target delivery system of theophylline-based nanovesicles (TP-NVs) surrounded by a biodegradable polymeric shell of chitosan (CS) and Eudragit L100 (EL100) for the treatment of ulcerative colitis (UC). TP-loaded nanovesicles were fabricated using the ethanol injection method and coated with CS and EL100, respectively. We used a 32-factorial design approach to optimize the concentration of CS and EL100 to minimize particle size (PS) and maximize the cumulative amount of theophylline released (CTR) after 24 h. The optimized formulation was described using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and in vitro release. In-vivo quantification of theophylline in the gastrointestinal tract and in-vivo targeting potential in a rat model of acetic acid-induced colitis were also thoroughly evaluated. The characteristics of the optimal formula predicted by the 32-factorial design approach corresponded exceptionally well with the measured PS of 271.3 nm, the zeta potential of -39.9 mV, and CTR of 3.95, and a 99.93% after 5 and 24 h, respectively. Notably, the in vivo results in the rat model of colitis showed that the formulation with an optimized coat significantly improved theophylline distribution to the colon and markedly decreased the expression of interleukin-6 and ulcerative lesions compared to a pure theophylline solution. These outcomes elucidated the feasibility of a 32-factorial design to detect the crucial interactions between the study's components. Our findings suggested that enteric-coated nanovesicles formulations with optimal coat compositions of 0.2693% (w/v) and 0.75% (w/v) of CS and EL100, respectively, were promising carriers for colonic delivery of theophylline, a rate-limiting step in the treatment of UC.

In vitro toxicity of naringin and berberine alone, and encapsulated within PMMA nanoparticles

Phytochemical compounds, such as naringin and berberine, have been used for many years due to their antioxidant activities, and consequently, beneficial health effects. In this study, it was aimed to evaluate the antioxidant properties of naringin, berberine and poly(methylmethacrylate) (PMMA) nanoparticles (NPs) encapsulated with naringin or berberine and their possible cytotoxic, genotoxic, and apoptotic effects on mouse fibroblast (NIH/3 T3) and colon cancer (Caco-2) cells. According to the results of the study, it was found that the 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition antioxidant activity of naringin, berberine, and naringin or berberine encapsulated PMMA NPs, was significantly increased at higher tested concentrations due to the antioxidant effects of naringin, berberine and naringin or berberine encapsulated PMMA NPs. As a result of the cytotoxicity assay, after 24-, 48- and 72-h of exposure, all of the studied compounds caused cytotoxic effects in both cell lines. Genotoxic effects of studied compounds were not registered at lower tested concentrations. Based on these data, polymeric nanoparticles encapsulated with naringin or berberine may contribute to new treatment approaches for cancer, but further in vivo and in vitro research is required.

Coprecipitation of Class II NSAIDs with Polymers for Oral Delivery

Non-steroidal anti-inflammatory drugs (NSAIDs) are frequently administered orally with modified-release formulations. The attainment of modified-release drugs is commonly achieved through the coprecipitation of the active principle with a biodegradable polymeric carrier in the form of micro or nanoparticles. In this review, some coprecipitation studies of three highly prescribed NSAIDs (in particular, ibuprofen, ketoprofen, and diclofenac sodium) have been analyzed. The techniques employed to micronize the powder, the polymers used, and the main results have been classified according to the type of release required in different categories, such as delayed, immediate, prolonged, sustained, and targeted release formulations. Indeed, depending on the pathology to be treated, it is possible to achieve specific therapeutic objectives, ensuring that the drug is released at a higher or lower dissolution rate (if compared to conventional drugs) and/or at a different time and/or in a specific site of action.

A Systematic Overview of Eudragit® Based Copolymer for Smart Healthcare

Eudragit, synthesized by radical polymerization, is used for enteric coating, precise temporal release, and targeting the entire gastrointestinal system. Evonik Healthcare Germany offers different grades of Eudragit. The ratio of methacrylic acid to its methacrylate-based monomers used in the polymerization reaction defines the final product's characteristics and consequently its potential range of applications. Since 1953, these polymers have been made to use in a wide range of healthcare applications around the world. In this review, we reviewed the "known of knowns and known of unknowns" about Eudragit, from molecule to material design, its characterization, and its applications in healthcare.

Surface functionalization of PLGA nanoparticles for potential oral vaccine delivery targeting intestinal immune cells

This study aimed to develop surface modified PLGA nanocarriers protecting a protein-based antigen in the stomach to enable potential release of the antigen at target intestinal sites. PLGA nanoparticles (NPs) were prepared by double emulsion and solvent evaporation techniques while surface functionalization was performed using polyethylene glycol (PEG), sodium alginate (ALG) and Eudragit L100 (EUD) with ovalbumin (OVA) as a model protein antigen. Nanoparticles were characterized by dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and stability in simulated gastric fluid (SGF)/simulated intestinal fluid (SIF). Structural integrity of released OVA was analyzed by circular dichroism (CD) and sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), while cytotoxicity against Jurkat cells was determined using MTT assay. Surface functionalized PLGA NPs protected the protein in SGF and SIF better than the non-functionalized NPs. Average size of OVA encapsulated NPs was between 235 and 326 nm and were spherical. FTIR band change was observed after surface modification and the surface modified NPs showed sustained OVA release compared with the uncoated NPs. The secondary structure of OVA released after 96 h remained intact and MTT assay showed >80 % cell viability after 72 h while unmodified and surface modified NPs achieved 17 % and 48 % mucin binding respectively. In conclusion, surface modified PLGA NPs have been shown to be safe for potential oral protein-based vaccine delivery.

Preparation of Conotoxin-Encapsulated Chitosan Nanoparticles and Evaluation of Their Skin Permeability

μ-Conotoxin CnIIIC (conotoxin, CTX)-loaded chitosan nanoparticles (CTX-NPs) were prepared using the ionic cross-linking method. The CTX-NPs were spherical and well with a polydispersity index of 0.292 ± 0.039, drug loading efficiency of 25.9 ± 1.2%, and encapsulation efficiency of 95.6 ± 1.3%. In vitro release studies showed that the release behavior of CTX-NPs in a pH 5.0 acetate buffer followed zero-order kinetics. In vitro transdermal experiments using Franz diffusion cells mounted with mouse abdominal skin demonstrated that the cumulative intradermal deposition amount of CTX per unit area in 8 h (D₈) and permeability coefficient (P_f) of CTX loaded on CTX-NPs were 2.30- and 7.71-times that of the CTX solution. In vivo transdermal experiments in mice showed that the amount of CTX deposited in the skin after 8 h of CTX saline administration was significantly lower than that of CTX deposited in the skin after administration of CTX-NPs. In vitro fluorescence labeling transdermal studies through Franz diffusion cells mounted with mouse abdominal skin indicated that CTX-NPs aggregated at hair follicles. Skin irritation tests in mice indicated that the irritation due to CTX-NPs was negligible. The cytotoxicity experiment showed that the viability of Balb/c 3T3 cells with CTX-NPs containing 230 μg/mL (0.08 μM) CTX was greater than 75%. CTX-NPs increase intradermal deposition of CTX by accumulating in hair follicles, which has positive implications for transdermal penetration of CTX.

Orally administered docetaxel-loaded chitosan-decorated cationic PLGA nanoparticles for intestinal tumors: formulation, comprehensive in vitro characterization, and release kinetics

Intestinal cancers are the third most lethal cancers globally, beginning as polyps in the intestine and spreading with a severe metastatic tendency. Chemotherapeutic drugs used in the treatment of intestinal tumors are usually formulated for parenteral administration due to poor solubility and bioavailability problems. Pharmaceutically, clinical failure due to a drug's wide biodistribution and non-selective toxicity is one of the major challenges of chemotherapy. In addition, parenteral drug administration in chronic diseases that require long-term drug use, such as intestinal tumors, is challenging in terms of patient compliance and poses a burden in terms of health economy. Especially in the field of chemotherapy research, oral chemotherapy is a subject that has been intensively researched in recent years, and developments in this field will provide serious breakthroughs both scientifically and socially. Development of orally applicable nanodrug formulations that can act against diseases seen in the distant region of the gastrointestinal tract (GIT), such as intestinal tumor, brings with it a series of difficulties depending on the drug and/or GIT physiology. The aim of this study is to develop an oral nanoparticle drug delivery system loaded with docetaxel (DCX) as an anticancer drug, using poly(lactic-co-glycolic acid) (PLGA) as nanoparticle material, and modified with chitosan (CS) to gain mucoadhesive properties. In this context, an innovative nanoparticle formulation that can protect orally administered DCX from GIT conditions and deliver the drug to the intestinal tumoral region by accumulating in mucus has been designed. For this purpose, DCX-PLGA nanoparticles (NPs) and CS/DCX-PLGA NPs were prepared, and their in vitro characteristics were elucidated. Nanoparticles around 250-300 nm were obtained. DCX-PLGA NPs had positive surface charge with CS coating. The formulations have the potential to deliver the encapsulated drug to the bowel according to the in vitro release studies in three different simulated GIT fluids for approximately 72 h. Mucin interaction and penetration into the artificial mucus layer were also investigated in detail, and the mucoadhesive and mucus-penetration characteristics of the formulations were examined. Furthermore, in vitro release kinetic studies of the NPs were elucidated. DCX-PLGA NPs were found to be compatible with the Weibull model, and CS/DCX-PLGA NPs were found to be compatible with the Peppas-Sahlin model. Within the scope of in vitro cytotoxicity studies, the drug-loaded NPs showed significantly higher cytotoxicity than a DCX solution on the HT-29 colon cell line, and CS/DCX-PLGA showed the highest cytotoxicity (p < 0.05). According to the permeability studies on the Caco-2 cell line, the CS/DCX-PLGA formulation increased permeability by 383% compared to free DCX (p < 0.05). In the light of all results, CS/DCX-PLGA NPs can offer a promising and innovative approach as an oral anticancer drug-loaded nanoformulation for intestinal tumors.

Eudragit® L100/Polyvinyl Alcohol Nanoparticles Impregnated Mucoadhesive Films as Ocular Inserts for Controlled Delivery of Erythromycin: Development, Characterization and In Vivo Evaluation

The fast elimination of drugs from the cornea is one of many challenges associated with the topical administration of conventional dosage forms. The present manuscript aimed to prepare modified-release inserts containing erythromycin (ERY) to enhance drug delivery and address the aforementioned limitation. Film formulations were developed using Eudragit^® L100 (EUD) and Polyvinyl Alcohol (PVA) polymers. ERY-loaded EUD-based nanoparticles were developed by the colloidal dispersion method using PVA as the emulsifier. The film-casting method was applied to form the mucoadhesive films using sodium alginate, gelatin, cyclodextrin-α, and β as polymeric film matrices. Different physicochemical properties of the optimized formulations and in vitro release profiles were evaluated. The in vivo evaluation was performed by collecting tear samples of rabbits using a novel, non-invasive method following the administration of inserts in the cul-de-sac. The ERY amount was assayed using a microbiological assay. The developed films showed prolonged in vitro and in vivo release profiles over five to six days; they had suitable physicochemical properties and a tensile strength of 2–3 MPa. All formulations exhibited antibacterial efficacy against E. coli and S. aureus with more than 20 mm diameter of inhibited growth zones. None of the formulations caused irritation to the rabbit’s eye. The inserts showed promising pharmacokinetics with AUC_0–120 of 30,000–36,000 µg·h/mL, a C_max of more than 1800 µg/mL at 4 h, and maintained drug concentration over the threshold of 5 µg/mL during the following 120 h of study. Nanoparticle-containing, mucoadhesive films could be fabricated as ocular inserts and can prolong the topical ocular delivery of ERY.

The synergic toxicity of temperature increases and nanopolystrene on zebrafish brain implies that global warming may worsen the current risk based on plastic debris

Global warming and plastic pollution are among the most important environmental problems today. Unfortunately, our world is warming more than expected and biological life, especially in the oceans, has come to the limit of the struggle for survival with the nano-scale plastic pollution that is constantly released from the main material. In this study, the synergic effect of one-degree temperature increase (28, 29, 30 °C) and 100 nm size polystyrene plastic nanoparticles on circadian rhythm, brain damage and metabolomics in zebrafish were investigated in an environment where temperature control with 0.05-degree precision is provided. A temperature increase of 1°, together with nanoplastic exposure, affected the circadian rhythm in zebrafish, caused damage to the brain and caused significant changes in the intensity of a total of 18 metabolites in different pathways. It was also detected Raman signals of polystyrene in the brain homogenate. As a consequence, it is suggested that one degree of temperature increase pave the way for degeneration in the brain by disrupting some metabolic pathways, thereby significantly increasing the negative effects of nano-plastic on behavior.

Preparation and characterization of colon-targeted pH/Time-dependent nanoparticles using anionic and cationic polymethacrylate polymers

Inflammatory bowel disease (IBD), which is a chronic inflammatory disease of the gastrointestinal system, has two subtypes: Ulcerative Colitis (UC) and Crohn's Disease (CD). Only pH-sensitive drug delivery systems are commonly utilized for the treatment of IBD, but their effectiveness is frequently obstructed by the change in intestinal pH. To overcome the inadequacy of only pH-dependent delivery systems, we developed in vitro evaluated both pH- and time-dependent nanoparticles loaded budesonide (BUD) for the treatment of IBD in this study. Anionic polymethacrylate was utilized as a pH-dependent polymer whereas cationic polymethacrylate was utilized as a time-dependent sustained release polymer. Nanoparticles were prepared through a single oil-in-water emulsion/solvent evaporation method. The encapsulation efficiency, mean particle size, zeta potential, polydispersity index (PDI), drug release profiles, drug release kinetics, and stability of these nanoparticles were investigated. In all formulations, mean particle sizes were below 250 nm and PDI values were between 0.1 and 0.3. Nanoparticles containing 90% anionic-10% cationic polymethacrylate polymers inhibited burst BUD release under acidic conditions and exhibited sustained drug release at neutral pH. Consequently, in the medication of IBD, BUD-loaded pH and time-dependent nanoparticles may be a promising choice as a drug delivery system.

Study of antimycobacterial, cytotoxic, and mutagenic potential of polymeric nanoparticles of copper (II) complex

This study aimed to encapsulate and characterize a potential anti-tuberculosis copper complex (CuCl₂(INH)₂.H₂O:I1) into polymeric nanoparticles (PNs) of polymethacrylate copolymers (Eudragit®, Eu) developed by nanoprecipitation method. NE30D, S100 and, E100 polymers were tested. The physicochemical characterizations were performed by DLS, TEM, FTIR, encapsulation efficiency and, in vitro release studies. Encapsulation of I1 in PN-NE30D, PN-E100, and PN-S100 was 26.3%, 94.5%, 22.6%, respectively. The particle size and zeta potential were 82.3 nm and -24.5 mV for PNs-NE30D, 304.4 nm and +18.7 mV for PNs-E100, and 517.9 nm and -6.9 mV for PNs-S100, respectively. All PDIs were under 0.5. The formulations showed a I1 controlled release at alkaline pH with 29.7% from PNs-NE30D, 7.9% from PNs-E100 and, 28.1% from PNs-S100 at 1 h incubation. PNs were stable for at least 3 months. Particularly, PNs-NE30D demonstrated moderate inhibition of M. tuberculosis and low cytotoxic activity. None of the PNs induced mutagenicity.

Synthesis of Eudragit® L100-coated chitosan-based nanoparticles for oral enoxaparin delivery

Enoxaparin is an effective biological molecule for prevention and treatment of coagulation disorders. However, it is poorly absorbed in the gastrointestinal tract. In this study, we developed an Eudragit® L100 coated chitosan core shell nanoparticles for enoxaparin oral delivery (Eud/CS/Enox NPs) through a completely eco-friendly method without employing any high-energy homogenizer technique and any organic solvents. Spherical nanocarriers were successfully prepared with particle size lower than 300 nm, polydispersity index about 0.12 and zeta potential higher than +25 mV, entrapment efficiency greater than 95% and the in vitro release behavior confirms the good colloidal stability and the successful Eudragit® L100 coating process demonstrated by negligible cumulative enoxaparin release (<10%) when the particles are submitted to simulated gastric fluid conditions. Finally, we demonstrated that the core-shell structure of the particle influenced the drug release mechanism of the formulations, indicating the presence of the Eudragit® L100 on the surface of the particles. These results suggested that enteric-coating approach and drug delivery nanotechnology can be successfully explored as potential tools for oral delivery of enoxaparin.

Development and optimization of paclitaxel loaded Eudragit/PLGA nanoparticles by simplex lattice mixture design: Exploration of improved hemocompatibility and in vivo kinetics

Anemia is the most common hematological abnormality of chemotherapy, which is responsible for poor clinical outcomes. To overcome this complication, the present study was aimed for developing a Eudragit/polylactic-co-glycolic acid (PLGA) based nanoparticulate system for a model drug paclitaxel (PTX). The study was planned using a simplex lattice mixture design. PTX nanoparticles (PTXNp) were evaluated in vitro for physicochemical properties, hemolytic effects and cytotoxic effects. Further, the nanoparticles were subjected to in vivo screening using rats for hemocompatibility, pharmacokinetic profile, and biodistribution to the vital organs. The PTXNps were 65.77-214.73 nm in size, showed more than 60% sustained drug release in 360 h and caused less than 8% hemolysis. The parameters like red blood cell count, activated partial thromboplastin time (aPTT), prothrombin time (PT) and C3 complement were similar to the negative control. Cytotoxicity results suggested that all the PTXNp demonstrated drug concentration-dependent cytotoxicity. The in vivo pharmacokinetic study concluded that PTXNp formulations had significantly higher blood AUC (93.194.55-163,071.15 h*ng/mL), longer half-lives (5.80-6.35 h) and extended mean residence times (6.05-8.54 h) in comparison to PTX solution (p < 0.05). Overall, the study provides a nanoparticulate drug delivery system to deliver PTX safely and effectively along with reducing the associated hematological adverse effects.

Macrophage reprogramming into a pro-healing phenotype by siRNA delivered with LBL assembled nanocomplexes for wound healing applications

Excessive inflammatory responses in wounds are characterized by the presence of high levels of pro-inflammatory M1 macrophages rather than pro-healing M2 macrophages, which leads to delayed wound healing. Macrophage reprogramming from the M1 to M2 phenotype through knockdown of interferon regulatory factor 5 (irf5) has emerged as a possible therapeutic strategy. While downregulation of irf5 could be achieved by siRNA, it very much depends on successful intracellular delivery by suitable siRNA carriers. Here, we report on highly stable selenium-based layer-by-layer (LBL) nanocomplexes (NCs) for siRNA delivery with polyethyleneimine (PEI-LBL-NCs) as the final polymer layer. PEI-LBL-NCs showed good protection of siRNA with only 40% siRNA release in a buffer of pH = 8.5 after 72 h or in simulated wound fluid after 4 h. PEI-LBL-NCs also proved to be able to transfect RAW 264.7 cells with irf5-siRNA, resulting in successful reprogramming to the M2 phenotype as evidenced by a 3.4 and 2.6 times decrease in NOS-2 and TNF-α mRNA expression levels, respectively. Moreover, irf5-siRNA transfected cells exhibited a 2.5 times increase of the healing mediator Arg-1 and a 64% increase in expression of the M2 cell surface marker CD206⁺. Incubation of fibroblast cells with conditioned medium isolated from irf5-siRNA transfected RAW 264.7 cells resulted in accelerated wound healing in an in vitro scratch assay. These results show that irf5-siRNA loaded PEI-LBL-NCs are a promising therapeutic approach to tune macrophage polarization for improved wound healing.

Preparation and characterization of Eudragit L 100-55/chitosan enteric nanoparticles containing omeprazole using general factorial design: in vitro/in vivo study

Background and purpose:

Omeprazole (OMP) is broadly used for the treatment of gastroesophageal reflux and other acid-related diseases. The current study aimed to prepare enteric-coated nanoparticles containing OMP to achieve a stable powder formulation easily prescribed in children.

Experimental approach:

The nanoparticles were formed by complex coacervation method using chitosan (CTS) and Eudragit L100/55 (EU) and the impact of various formulation variables (the concentrations of EU solution and its volume ratio to CTS solution) were assessed using 3² fractional design. The mean particle size (PS), zeta potential (ZP), encapsulation efficiency (EE), and drug loading (DL) were determined. Finally, the pharmacological effects of the optimized OMP enteric nanoparticles were evaluated by an in vivo antiulcer study using Sprague-Dawley rats.

Findings/Results:

The highest desirability value was for formulation F5 (containing EU concentration 4 mg/mL and EU/CTS volume ratio 2:1). PS, ZP, EE, and DL of the optimized OMP-loaded nanoparticles were confirmed 810 ± 14 nm, -38.2 ± 1.8 mV, 83.1± 4.2%, and 13.1± 1.5%, respectively. in vitro release studies showed the pH sensitivity of nanoparticles and OMP release was pH-dependent. in vivo pharmacological assessment revealed that the optimized formulation was able to protect rat stomach against ulcer formation induced by indomethacin compared to the group that received normal saline which demonstrated severe peptic ulcer and hemorrhagic spots.

Conclusion and implication:

Our results indicated that the enteric EU/CTS nanoparticles were successfully prepared via a complex coacervation method and their efficacy could be comparable with commercial OMP pellets.

Smart vaginal bilayer films of Tenofovir based on Eudragit® L100/natural polymer for the prevention of the sexual transmission of HIV

In the absence of an effective vaccine, vaginal microbicides are essential for preventing the sexual transmission of HIV to women. Antiretroviral vaginal films have emerged as promising choices, especially those offering mucoadhesivity and controlled drug release. Tenofovir-loaded bilayer films based on Eudragit® L100 (EL100) and a biopolymer - gum arabic, karaya gum, pectin or tragacanth gum - were developed in a single-stage process. Cytotoxicity studies in three human cell lines indicated no toxicity of the excipients at the concentrations tested. Raman spectroscopy and SEM confirmed the formation of the two layers and their anchoring. Texture analysis showed no major differences between the batches. The swelling of the film is conditioned by its biopolymer nature and by the amount of EL100, which acts as structuring agent thus enhancing swelling. Tragacanth gum-based batches showed high mucoadhesion regardless the amount of EL100. The controlled release of Tenofovir in simulated vaginal fluid was faster in the presence of simulated seminal fluid due to the dissolution of EL100. Films containing 400 mg of EL100 and tragacanth gum are promising candidates for future studies, as they could sexually safeguard women from HIV for at least one week and ensure greater protection during intercourse.

Enhanced siRNA Delivery and Selective Apoptosis Induction in H1299 Cancer Cells by Layer-by-Layer-Assembled Se Nanocomplexes: Toward More Efficient Cancer Therapy

Nanotechnology has made an important contribution to oncology in recent years, especially for drug delivery. While many different nano-delivery systems have been suggested for cancer therapy, selenium nanoparticles (SeNPs) are particularly promising anticancer drug carriers as their core material offers interesting synergistic effects to cancer cells. Se compounds can exert cytotoxic effects by acting as pro-oxidants that alter cellular redox homeostasis, eventually leading to apoptosis induction in many kinds of cancer cells. Herein, we report on the design and synthesis of novel layer-by-layer Se-based nanocomplexes (LBL-Se-NCs) as carriers of small interfering RNA (siRNA) for combined gene silencing and apoptosis induction in cancer cells. The LBL-Se-NCs were prepared using a straightforward electrostatic assembly of siRNA and chitosan (CS) on the solid core of the SeNP. In this study, we started by investigating the colloidal stability and protection of the complexed siRNA. The results show that CS not only functioned as an anchoring layer for siRNA, but also provided colloidal stability for at least 20 days in different media when CS was applied as a third layer. The release study revealed that siRNA remained better associated with LBL-Se-NCs, with only a release of 35% after 7 days, as compared to CS-NCs with a siRNA release of 100% after 48 h, making the LBL nanocarrier an excellent candidate as an off-the-shelf formulation. When applied to H1299 cells, it was found that they can selectively induce around 32% apoptosis, while significantly less apoptosis (5.6%) was induced in NIH/3T3 normal cells. At the same time, they were capable of efficiently inducing siRNA downregulation (35%) without loss of activity 7 days post-synthesis. We conclude that LBL-Se-NCs are promising siRNA carriers with enhanced stability and with a dual mode of action against cancer cells.

Combinatorial microneedle patch with tunable release kinetics and dual fast-deep/sustained release capabilities

Transdermal microneedle (MN) drug delivery patches, comprising water-soluble polymers, have played an essential role in diverse biomedical applications, but with limited development towards fast deep release or sustained delivery applications. The effectiveness of such MN delivery patches strongly depends on the materials from which they are constructed. Herein, we present a dual-action combinatorial programmable MN patch, comprising of fast and sustained-release MN zones, with tunable release kinetics towards delivering a wide range of therapeutics over different timeframes in single application. We demonstrate the fine tuning of MN materials; the patches can be tailored to deliver a first payload faster and deeper within minutes, while simultaneously delivering a second payload over long times ranging from weeks to months. The active and rapid burst release relies on embedding biodegradable Mg microparticle 'engines' in dissolvable MNs while the sustained release is attributed to biocompatible polymers that allow prolonged release in a controllable tunable manner. In addition, the patches are characterized and optimized for their design, materials and mechanical properties. These studies indicate that such programmable dual-action versatile MN platform is expected to improve therapeutic efficacy and patient compliance, achieving powerful benefits by single patch application at low manufacturing cost.

Development of an M cell targeted nanocomposite system for effective oral protein delivery: preparation, in vitro and in vivo characterization

Background

There is a strong need for non-invasive and patient-friendly delivery systems of protein drugs for long-term therapy. However, oral delivery of protein drugs is a big challenge due to many barriers including instability in the gastrointestinal (GI) tract and low permeability. To overcome the absorption barriers in GI tract and improve the patient compliance, this study aimed to develop an M cell targeted-nanocomposite delivery system of protein drugs.

Results

An aminoclay-protein core complex (AC-Ins) was prepared by using insulin as a model protein and then sequentially coated with Ulex europaeus agglutinin 1 (UEA-1) for M-cell targeting and the pH sensitive polymer, Eudragit® L100 (EUAC-Ins). All nanoparticles were obtained with a high entrapment efficiency (> 90%) and their structural characteristics were confirmed by Fourier transform-infrared spectroscopy, energy dispersive X-ray spectroscopy, and circular dichroism. Among the developed nanoparticles, EUAC-Ins effectively suppressed drug release at pH 1.2, while rapidly released drugs at pH 6.8 due to dissolution of the outer coating layer. The conformational stability of insulin entrapped in EUAC-Ins was well maintained in the presence of proteolytic enzymes. Compared to free insulin, EUAC-Ins increased the membrane transport of insulin by 4.4-fold in M cells. In parallel, oral administration of EUAC-Ins in mice enhanced insulin uptake by 4.1-fold in the intestinal Peyer’s patches and 2.6-fold in intestinal epithelium tissues with normal villi, compared to free insulin. Orally administered EUAC-Ins decreased significantly the blood glucose level in diabetic mice, while the effect of oral insulin solution was negligible.

Conclusion

An M cell targeted-ternary nanocomposite system obtained by dual coating of the aminoclay-protein core complex with UEA-1 and a pH dependent polymer is promising as an effective oral protein delivery carrier.

In situ Formed Implants, Based on PLGA and Eudragit Blends, for Novel Florfenicol Controlled Release Formulations

Drug controlled release technologies (DCRTs) represent an opportunity for designing new therapies. Main objectives are dose number optimization and secondary effects reduction to improve the level of patient/client acceptance. The present work studies DCRTs based in blended polymeric implants for single dose and long-term therapies of florfenicol (FF), a broad spectrum antibiotic. Polymers used were PLGA and Eudragit E100/S100 types. Eudragit/PLGA and FF/PLGA ratios were the main studied factors in terms of encapsulation efficiencies (EEs) and drug release profiles. In addition, morphological and physicochemical characterization were carried out. EEs were of 50-100% depending on formulation composition, and the FF releasing rate was increased or diminished when E100 or S100 were added, respectively. PLGA hydrolytic cleavage products possibly affect Eudragit solubility and matrix stability. Different mathematical models were used for better understanding and simulating release processes. Implants maintained the antimicrobial activity against Pseudomonas aeruginosa up to 12 days on agar plates. The developed DCRTs represents a suitable alternative for florfenicol long-term therapies.

Oral meropenem for superbugs: challenges and opportunities

An increase in the number of multidrug-resistant microbial strains is the biggest threat to global health and is projected to cause >10 million deaths by 2055. The carbapenem family of antibacterial drugs are an important class of last-resort treatment of infections caused by drug-resistant bacteria and are only available as an injectable formulation. Given their instability within the gut and poor permeability across the gut wall, oral carbapenem formulations show poor bioavailability. Meropenem (MER), a carbapenem antibiotic, has broad-spectrum antibacterial activity, but suffers from the above-mentioned issues. In this review, we discuss strategies for improving the oral bioavailability of MER, such as inhibiting tubular secretion, prodrug formulations, and use of nanomedicine. We also highlight challenges and emerging approaches for the development of oral MER.

Polymer colloids as drug delivery systems for the treatment of arthritis

The most common types of arthritis are osteoarthritis (OA) and rheumatoid arthritis (RA) which are themain causes of disability and pain among older people. Current treatment of arthritis mainly consists of oral and intra-articular medications. Despite the efficacy of the intraarticular injections over the oral treatment, it is still limited by the rapid clearance of the injected drug. Therefore, a rational design of drug delivery systems (DDSs) able to delivery drugs in controlled manner and for required period of time to the arthritis joint is a key in developing safe and effective formulations for OA and RA. In this paper various colloidal systems like nanoparticles, liposomes, cationic carriers, hydrogels, and emulsion-based carriers were presented and discussed in light of their use and efficacy as delivery systems to transport therapeutics for arthritis treatment. Factors influencing the delivery efficacy such as size, charge, structure, drug uptake, retention and its release profile alongside with cytocompatibility and safety were addressed. Moreover, the advantages and disadvantages of the different colloidal systems were emphasised.

Polymeric Inserts Containing Eudragit® L100 Nanoparticle for Improved Ocular Delivery of Azithromycin

Polymeric inserts containing azithromycin-loaded Eudragit® L100 nanoparticles were developed to sustain the drug release and enhance its ocular performance. The solvent diffusion technique was employed to prepare nanoparticles. The developed nanoparticles (NPs) were fully characterized and investigated. The solvent casting method was used to prepare azithromycin ocular inserts (azithromycin, AZM film) by adding hydroxypropyl methylcellulose (HPMC) or hydroxyethyl cellulose (HEC) solutions after the incorporation of AZM-loaded Eudragit® L100 nanoparticles into plasticized PVA (polyvinyl alcohol) solutions. The optimized nanoparticles had a particle size of 78.06 ± 2.3 nm, zeta potential around -2.45 ± 0.69 mV, polydispersity index around 0.179 ± 0.007, and entrapment efficiency 62.167 ± 0.07%. The prepared inserts exhibited an antibacterial effect on Staphylococcus aureus and Escherichia coli cultures. The inserts containing AZM-loaded nanoparticles showed a burst release during the initial hours, followed by a sustained drug release pattern. Higher cumulative corneal permeations from AZM films were observed for the optimized formulation compared to the drug solution in the ex-vivo trans-corneal study. In comparison to the AZM solution, the inserts significantly prolonged the release of AZM in rabbit eyes (121 h). The mucoadhesive inserts containing azithromycin-loaded Eudragit® L100 nanoparticles offer a promising approach for the ocular delivery of azithromycin (antibacterial and anti-inflammatory) to treat ocular infections that require a prolonged drug delivery.

Colon targeted delivery of niclosamide from β-cyclodextrin inclusion complex incorporated electrospun Eudragit® L100 nanofibers

Electrospun nanofibers incorporated with inclusion complex (IC) of niclosamide (NIC) and hydroxypropyl-beta-cyclodextrin (HPβCD) (NIC-HPβCD-IC) was produced from pH-responsive polymer (Eudragit® L100, EUD), which disintegrates at pH values higher than 6, (EUD-NIC-HPβCD-IC-NF) for targeted delivery of NIC to the colon. Pristine EUD nanofibers (EUD-NF), only NIC loaded (EUD-NIC-NF) and physical mixture of NIC and HPβCD loaded EUD nanofibers (EUD-NIC-HPβCD-NF) were also produced as reference. SEM images revealed the bead-free and uniform morphology of nanofibers. XRD, TGA, and DSC were also performed for both NIC-HPβCD-IC and electrospun nanofibers and it was seen that there are some NIC molecules, which cannot make IC. Dissolution studies were carried out for 240 min at pH 1.2 and pH 7 simulating stomach and colon, respectively. EUD-NIC-NF released almost 53 % of NIC in 120 min, whereas EUD-NIC-HPβCD-NF (15 %) and EUD-NIC-HPβCD-IC-NF (8 %) released at most 15 % of NIC in 120 min. Then, remained NIC in the nanofibers released into the colon for the next 120 min. The slight difference in the release of NIC into stomach from EUD-NIC-HPβCD-NF and EUD-NIC-HPβCD-IC-NF might be due to the uncomplexed NIC molecules in EUD-NIC-HPβCD-IC-NF. More importantly, EUD-NIC-HPβCD-IC-NF was quite effective for preventing the release of NIC in the stomach in contrast to EUD-NIC-NF, which has already released more than half amount of NIC in 120 min. In conclusion, this study might open new areas for developing targeted delivery systems by the combination of nanofibers and CD-ICs for hydrophobic drugs such as NIC.

Biomedical and Pharmacological Uses of Fluorescein Isothiocyanate Chitosan-Based Nanocarriers

Chitosan-based nanocarriers (ChNCs) are considered suitable drug carriers due to their ability to encapsulate a variety of drugs and cross biological barriers to deliver the cargo to their target site. Fluorescein isothiocyanate-labeled chitosan-based NCs (FITC@ChNCs) are used extensively in biomedical and pharmacological applications. The main advantage of using FITC@ChNCs consists of the ability to track their fate both intra and extracellularly. This journey is strictly dependent on the physico-chemical properties of the carrier and the cell types under investigation. Other applications make use of fluorescent ChNCs in cell labeling for the detection of disorders in vivo and controlling of living cells in situ. This review describes the use of FITC@ChNCs in the various applications with a focus on understanding their usefulness in labeled drug-delivery systems.

In Vitro Release Study of the Polymeric Drug Nanoparticles: Development and Validation of a Novel Method

The in vitro release study is a critical test to assess the safety, efficacy, and quality of nanoparticle-based drug delivery systems, but there is no compendial or regulatory standard. The variety of testing methods makes direct comparison among different systems difficult. We herein proposed a novel sample and separate (SS) method by combining the United States Pharmacopeia (USP) apparatus II (paddle) with well-validated centrifugal ultrafiltration (CU) technique that efficiently separated the free drug from nanoparticles. Polymeric drug nanoparticles were prepared by using a four-stream multi-inlet vortex mixer with d-α-tocopheryl polyethylene glycol 1000 succinate as a stabilizer. Itraconazole, cholecalciferol, and flurbiprofen were selected to produce three different nanoparticles with particle size <100 nm. By comparing with the dialysis membrane (DM) method and the SS methods using syringe filters, this novel SS + CU technique was considered the most appropriate in terms of the accuracy and repeatability to provide the in vitro release kinetics of nanoparticles. Interestingly, the DM method appeared to misestimate the release kinetics of nanoparticles through separate mechanisms. This work offers a superior analytical technique for studying in vitro drug release from polymeric nanoparticles, which could benefit the future development of in vitro-in vivo correlation of polymeric nanoparticles.

Evaluation of potential environmental toxicity of polymeric nanomaterials and surfactants

Nanomaterials have gained huge importance in various fields including nanomedicine. Nanoformulations of drugs and nanocarriers are used to increase pharmaceutical potency. However, it was seen that polymeric nanomaterials can cause negative effects. Thus, it is essential to identify nanomaterials with the least adverse effects on aquatic organisms. To determine the toxicity of polymeric nanomaterials, we investigated the effects of poly(lactic-co-glycolid) acid (PLGA), Eudragit® E 100 and hydroxylpropyl methylcellulose phthalate (HPMCP) on zebrafish embryos using the fish embryo toxicity test (FET). Furthermore, we studied Cremophor® RH40, Cremophor® A25, Pluronic® F127 and Pluronic® F68 applied in the generation of nanoformulations to identify the surfactant with minimal toxic impact. The order of ecotoxicty was HPMCP < PLGA < Eudragit® E100 and Pluronic® F68 < Pluronic® F127 < Cremophor® RH40 < Cremophor® A25. In summary, HPMCP and Pluronic® F68 displayed the least toxic impact, thus suggesting adequate environmental compatibility for the generation of nanomedicines.

Diclofenac sodium loaded PLGA nanoparticles for inflammatory diseases with high anti-inflammatory properties at low dose: Formulation, characterization and in vivo HET-CAM analysis

The development of a new drug active substance is not only time-consuming and expensive, but also a chain of operations that often fails. However, increasing the bioavailability, effectiveness, safety, or targeting the drugs used in clinic by various methods, such as nanoparticles (NPs), may be a more effective way of using them in clinic. In addition, NP formulations are becoming increasingly popular in modern medical treatments. Angiogenesis, formation of new capillaries from a pre-existing one, fundamentally occurs in physiological processes such as wound healing, embryogenesis and menstrual cycle, also has a vital role in pathology of cancer, psoriasis, diabetic retinopathy and chronic inflammation. The Hen's Egg Test on the Chorioallantoic Membrane (HET-CAM) assay is a useful, well established and animal alternative in vivo procedure for evaluation of anti-inflammatory potentials and anti-irritant properties of nano drug delivery systems. In this study, diclofenac sodium (DS) loaded PLGA NPs were prepared and characterized. The particle size (PS) of DS-loaded PLGA NPs was between 114.7 and 124.8 nm and all NPs were monodisperse with negative zeta potential values. The encapsulation efficiency was in range of 41.4-77.8%. In vitro dissolution studies of NPs showed up to 24 h of DS release after the first 3 h of burst effect. The 3 h burst effect and 24 h release kinetics studied with DDSolver were found to be predominantly driven not only by one mechanism, by a combined mechanism of Fickian and non-Fickian. Solid state structures of formulations were clarified by DSC and FT-IR analysis. PS, EE% and release rates were found to be affected by the amount of DS added to the formulations. Increasing the amount of DS added to the formulations increased PS, while the EE% decreased. The release rates were affected by PS and the formulation with the lowest PS value showed slower release. The anti-inflammatory activity of optimum formulation (NP-1) was examined using in vivo HET-CAM assay. The anti-inflammatory activity results indicated that NP-1 coded NP formulation showed significantly good anti-inflammatory potential at low dose. As a result, a low dose high anti-inflammatory effect was achieved with the NP structure of DS. To the best of our knowledge this is the first study on in vivo anti-inflammatory activities of DS loaded PLGA NPs by HET-CAM.

Stability issues and approaches to stabilised nanoparticles based drug delivery system

Nanoparticles form the fundamental building blocks for many exciting applications in various scientific disciplines due to its unique features such as large surface to mass ratio, targeting potential, ability to adsorbed and carry other compound which makes them suitable for biomedical applications. However, the problem of the large-scale synthesis of nanoparticles remains challenging due to physical instability associated with nanoparticles which lead to generation of aggregates particles with high polydispersity index (PDI) indicating low particle homogeneity and eventually loss of their special nanoscale properties. The stabilisation concept can be generated by repulsive electrostatic force, which nanoparticles experience, when they are surrounded by a double layer of electric charges. Selection of proper stabiliser will govern the stability of NPs and ultimately development of optimised drug delivery system. This review summarises mechanism of physical instability issues likely to be encountered during the development of nanoformulations. It also discusses potential stabilising agents used so far and their mechanism in achieving stable nanosystems.

Preparation and Evaluation of Eudragit® L100 Nanoparticles Loaded Impregnated with KT Tromethamine Loaded PVA -HEC Insertions for Ophthalmic Drug Delivery

Purpose: The purpose of the present study was to improve the ocular delivery for ketorolac tromethamine (KT) used to treat inflammation of the eye.

Methods: Eudragit nanoparticles loaded with KT were prepared and incorporated in polyvinyl alcohol (PVA) and hydroxyethyl cellulose (HEC) films. Nanoparticles were characterized by Fourier transform-infrared (FT-IR), scanning electron microscopy (SEM). Physicochemical properties and encapsulation effciency were investigated for nanoparticles. Also, the inserts were evaluated for their physiochemical parameters like percentage moisture absorption, percentage moisture loss, thickness and folding endurance.

Results: Mean particle size and zeta potential were in range of 153.8-217 nm and (-10.8) - (-40.7) mV, respectively. The results show that the use of a surfactant has not led to any major change on drug loading. The loading increases with the amount of polymer. The insert had a thickness varying from 0.072 ± 0.0098 to 0.0865 ± 0.0035 mm. The thicknesses of the inserts and the folding endurance increased with the total polymer concentration. The physicochemical properties showed that the Eudragit® L-100 nanoparticles loaded PVA-HEC films could be an effective carrier for KT.

Conclusion: For the first time, inserts of Eudragit nanoparticles were successfully prepared for ophthalmic drug delivery system to prevent frequent drug administration and enhance patient compliance.

Polystyrene nanoplastics (20 nm) are able to bioaccumulate and cause oxidative DNA damages in the brain tissue of zebrafish embryo (Danio rerio)

Nano-sized plastic particles formed from both daily use plastics and its debris have become a potential health and environmental problem due to features such as transportation through food webs and maternal transfer. Although many studies on the toxicity of plastics exist more detailed and molecular studies are needed to evaluate and review the effects of plastics especially in nano-size range. For this purpose, we have microinjected polystyrene nanoplastics (PNP) (20 nm) to the zebrafish embryo, which is one of the best model organisms for developmental toxicity studies, to simulate intake with food or maternal. Survival, hatching and malformations evaluated during the experimental period (120 h). Moreover, we have aimed to put forth the presence of reactive oxygen species (ROS) and apoptosis signalling accumulation in the body in addition to bioaccumulation of PNP and immunochemical toxicity (8-OHdG) on the brain of zebrafish larvae at the 120th hour. According to results, it has been demonstrated that 20 nm diameter PNP can reach the brain and bioaccumulate there, moreover lead to oxidative DNA damage in the brain regions where it bioaccumulates. Here we have also imaged the PNP from a vertebrate brain via transmission electron microscopy (TEM) for the first time. As a result of these, it has been detected increasing mortality and prevailing abnormalities in addition to excessive ROS and apoptosis in especially the brain. As a conclusion, obtained data have suggested that precautions, on the use and contamination of the plastic product, to be taken during both pregnancy and baby care/feeding are important for the health of the baby in future.

Oral pentamidine-loaded poly(d,l-lactic-co-glycolic) acid nanoparticles: an alternative approach for leishmaniasis treatment

Leishmaniasis is a group of diseases caused by a protozoa parasite from one of over 20 Leishmania species. Depending on the tissues infected, these diseases are classified as cutaneous, mucocutaneous and visceral leishmaniasis. For the treatment of leishmaniasis refractory to antimony-based drugs, pentamidine (PTM) is a molecule of great interest. However, PTM displays poor bioavailability through oral routes due to its two strongly basic amidine moieties, which restricts its administration by a parenteral route and limits its clinical use. Among various approaches, nanotechnology-based drug delivery systems (nano-DDS) have potential to overcome the challenges associated with PTM oral administration. Here, we present the development of PTM-loaded PLGA nanoparticles (NPs) with a focus on the characterization of their physicochemical properties and potential application as an oral treatment of leishmaniasis. NPs were prepared by a double emulsion methodology. The physicochemical properties were characterized through the mean particle size, polydispersity index (PdI), zeta potential, entrapment efficiency, yield process, drug loading, morphology, in vitro drug release and in vivo pharmacological activity. The PTM-loaded PLGA NPs presented with a size of 263 ± 5 nm (PdI = 0.17 ± 0.02), an almost neutral charge (-3.2 ± 0.8 mV) and an efficiency for PTM entrapment of 91.5%. The release profile, based on PTM dissolution, could be best described by a zero-order model, followed by a drug diffusion profile that fit to the Higuchi model. In addition, in vivo assay showed the efficacy of orally given PTM-loaded PLGA NPs (0.4 mg kg^-1) in infected BALB/c mice, with significant reduction of organ weight and parasite load in spleen (p-value < 0.05). This work successfully reported the oral use of PTM-loaded NPs, with a high potential for the treatment of visceral leishmaniasis, opening a new perspective to utilization of this drug in clinical practice.

Development of conjugate-by-conjugate structured nanoparticles for oral delivery of docetaxel

In the current study, we developed interpolymer-complex structures composed of hydroxypropyl methylcellulose (HPMC) and chitosan knitted with d-α-tocopherol polyethylene glycol succinate (TPGS) to establish oral nanoparticle delivery systems that could keep the drug dose from releasing into the gastrointestinal tract for at least 6 h. Two kinds of nanoparticle formations based on the so-called conjugate-by-conjugate strategy were introduced in the study. In the first conjugate-by-conjugate structured nanoparticle formation, TPGS was conjugated with an HPMC-chitosan conjugate, followed by the drug loading process. In the second approach, the drug was loaded with TPGS directly and subsequently conjugated with the HPMC-chitosan conjugate. Beneficially, polyvinyl alcohol could act not only as a stabilizing agent but also as a crosslinking agent for the nanoparticles. This study created newly modified structures of HPMC and chitosan, altering their physicochemical properties that could then retard drug release. The nanoparticles were cytotoxic towards MDA-MB-231 breast cancer cells when docetaxel was loaded in the nanoparticles, particularly the nanoparticles produced in the second approach, demonstrating their ability to kill cancerous cells and their potential for further applications in cancer therapy. Additionally, when Caco-2 cells were used as an absorption model in a transport study, the nanoparticles in the second approach showed their capacity to increase drug permeability across the monolayers of Caco-2 cells compared to the free-drug solution. This study also illustrated the enhanced uptake of the nanoparticles by the Caco-2 cells, implying enhanced absorption through the intestine. Therefore, these oral nanoparticles can be considered for delivery systems of agents that are sensitive to the gastrointestinal tract so that they can be transported across the epithelial cells to the bloodstream to deliver the loading cargo at an optimal concentration.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.