Effects of Formulation Variables on the Particle Size and Drug Encapsulation of Imatinib-Loaded Solid Lipid Nanoparticles

Enhancement of Liver Targetability through Statistical Optimization and Surface Modification of Biodegradable Nanocapsules Loaded with Lamivudine

The intention of the current work was to develop and optimize the formulation of biodegradable polymeric nanocapsules for lamivudine (LMV) in order to obtain desired physical characteristics so as to have improved liver targetability. Nanocapsules were prepared in this study as aqueous-core nanocapsules (ACNs) with poly(lactide-co-glycolide) using a modified multiple emulsion technique. LMV was taken as a model drug to investigate the potential of ACNs developed in this work in achieving the liver targetability. Three formulations factors were chosen and 33 factorial design was adopted. The selected formulation factors were optimized statistically so as to have the anticipated characteristics of the ACNs viz. maximum entrapment efficiency, minimum particle size, and less drug release rate constant. The optimized LMV-ACNs were found to have 71.54 ± 1.93% of entrapment efficiency and 288.36 ± 2.53 nm of particle size with zeta potential of -24.7 ± 1.2 mV and 0.095 ± 0.006 h-1 of release rate constant. This optimized formulation was subjected to surface modification by treating with sodium lauryl sulphate (SLS), which increased the zeta potential to a maximum of -41.6 ± 1.3 mV at a 6 mM concentration of SLS. The results of in vivo pharmacokinetics from blood and liver tissues indicated that hepatic bioavailability of LMV was increased from 13.78 ± 3.48 μg/mL ∗ h for LMV solution to 32.94 ± 5.12 μg/mL ∗ h for the optimized LMV-ACNs and to 54.91 ± 6.68 μg/mL ∗ h for the surface-modified LMV-ACNs.

Assembly of nanostructured lipid carriers loaded gefitinib and simvastatin as hybrid therapy for metastatic breast cancer: Codelivery and repurposing approach

Breast cancer represents a life-threatening problem globally. The major challenge in the clinical setting is the management of cancer resistance and metastasis. Hybrid therapy can affect several cellular targets involved in carcinogenesis with a lessening of adverse effects. Therefore, the current study aims to assemble, and optimize a hybrid of gefitinib (GFT) and simvastatin (SIM)-loaded nanostructured lipid carrier (GFT/SIM-NLC) to combat metastatic and drug-resistant breast cancer. GFT/SIM-NLC cargos were prepared using design of experiments to investigate the impact of poloxamer-188 and fatty acids concentrations on the physicochemical and pharmaceutical behavior properties of NLC. Additionally, the biosafety of the prepared GFT/SIM-NLC was studied using a fresh blood sample. Afterward, the optimized formulation was subjected to an MTT assay to study the cytotoxic activity of GFT/SIM-NLC compared to free GFT/SIM using an MCF-7 cell line as a surrogate model for breast cancer. The present results revealed that the particle size of the prepared NLC ranged from (209 to 410 nm) with a negative zeta potential value ranging from (-17.2 to -23.9 mV). Moreover, the optimized GFT/SIM-NLC formulation showed favorable physicochemical properties and promising lymphatic delivery cargos. A biosafety study indicates that the prepared NLC has a gentle effect on erythrocyte hemolysis. Cytotoxicity studies revealed that GFT/SIM-NLC enhanced the killing of the MCF-7 cell line compared to free GFT/SIM. This study concluded that the hybrid therapy of GFT/SIM-NLC is a potential approach to combat metastatic and drug-resistant breast cancer.

Unroasted Green Coffee Extract-Loaded Solid Lipid Nanoparticles for Enhancing Intestinal Permeation

Green coffee bean extract (GCBE) provides diversified health benefits. However, its reported low bioavailability impeded its utilization in various applications. In this study, GCBE-loaded solid lipid nanoparticles (SLNs) were prepared to improve the bioavailability through enhanced intestinal absorption of GCBE. During the preparation of promising GCBE-loaded SLNs, the lipid concentration, surfactant concentration, and co-surfactant amount are crucial that were optimized using the Box-Behnken design, while particle size, polydispersity index (PDI), ζ-potential, entrapment efficiency, and cumulative drug release were the measured responses. GCBE-SLNs were successfully developed by a high shear homogenization technique using geleol as a solid lipid, tween 80 as a surfactant, and propylene glycol as Co-SAA. The optimized SLNs contained 5.8% geleol, 5.9% tween 80, and 80.4 mg PG resulting in a small particle size of 235.7 ± 12.5 nm, reasonably acceptable PDI of 0.417 ± 0.023, and ζ-potential of -15 ± 0.14 mV, with a high entrapment efficiency of 58.3 ± 0.85% and cumulative release of 7575 ± 0.78%. Furthermore, the performance of the optimized GCBE-SLN was evaluated using an ex vivo everted sac model where the intestinal permeation of GCBE was improved due to nanoencapsulation using SLN. Consequently, the results enlightened the auspicious potential of exploiting oral GCBE-SLNs for boosting intestinal absorption of chlorogenic acid.

Lipid nanoparticles for gene therapy in ocular diseases

OBJECTIVES

Lipid nanoparticles, as a nucleic acid delivery system, have been used as an alternative to treat ocular diseases, since they can cross the ocular barrier and efficiently transfecting nucleic acids to various cells of the eye. The size influences the transfection of genes, biological distribution, diffusion, and cellular uptake. It is therefore important to establish a relationship between size, formulation, and encapsulation percentage.

EVIDENCE ACQUISITION

In this review, we used a search strategy to compare studies of nanomedicine systems aimed at eye diseases where the size of the nanoparticles and the efficiency of encapsulation of genetic material are reported based on the criteria of Preferred Reporting Items for Systematic Reviews (PRISMA ScR 2020 guidelines).

RESULTS

Out of the initial 5932, 169 studies met the inclusion criteria and were included to form the basis of the analysis. Nanoparticles reported are composed mainly of PEG-modified lipids, cholesterol, and cationic lipids, that in combination with messenger or interference RNA, allow the formulation of a nanoparticle with an encapsulation efficiency greater than 95%. The diseases treated mainly focus on conditions related to the retina and cornea. Certain characteristics of nanoparticles increase encapsulation efficiency, such as the size of the nanoparticle and the charge of the outer layer of the nanoparticle.

CONCLUSION

It is still unknown what characteristics lipid nanoparticles should have to successfully treat human eye illnesses. The in vitro and in vivo investigations covered in this review, however, present encouraging results. To improve encapsulation effectiveness and disease gene silencing, nanoparticle formulation is essential. The most stable nanoparticles are those made mostly of cationic lipids, PEG lipids, and cholesterol, which also effectively encapsulate RNA. The encapsulation efficiency is not only influenced by size, but also by other factors such as methods of preparation.

Use of the quantum dot-labeled solid lipid nanoparticles for delivery of streptomycin and hydroxychloroquine: A new therapeutic approach for treatment of intracellular Brucella abortus infection

Brucellosis is considered one of the most important infectious diseases affecting any tissue and organ in the human body. Due to the intracellular pathogenesis of Brucella species, the use of conventional antibiotics for managing chronic brucellosis has several limitations. Therefore, the study focused on the use of solid lipid nanoparticles (SLN) to deliver streptomycin (STR) for intracellular infection, with or without the combination of hydroxychloroquine (HCQ) to evaluate if there might be a boost in the antibiotic effect when using the STR or STR-NPs alone. We used the double emulsion technique to synthesize Nano drug carriers; afterward, the physicochemical characteristics of synthesized Nano drug carriers were determined. The in vitro antibacterial activity of free drugs and Nano drug carriers were evaluated using well diffusion, broth microdilution assays (BMD), and murine macrophage-like cells cell line J774A.1. Additionally, acute and chronic phases of brucellosis were inducted into Wistar rats, and healing capacity of Nano drug carriers on liver and spleen tissues was compared with free drugs. The zeta potential of nanoparticles, means of size, Polydispersity Index (PDI), drugs loading, and encapsulation efficiency were 15.2 mV, 312.5 ± 26 nm, 0.433 ± 0.09, 16.6% and 89.5%, respectively. Well diffusion and BMD methods did not show a significantly differ between free drugs and nano drug carriers. However, the Nano drug carriers remarkably decreased the number of bacteria in the cell line compared to the free drugs. STR/HCQ-SLN enhanced the healing processes of the liver and spleen after brucellosis induction. STR/HCQ-SLN showed better inhibitory effects against the chronic phase of B. abortus infection in comparison to the STR-SLN, but this difference was not statistically significant. Using nanoplatforms to enhance conventional anti-brucellosis agents is promising, green and safe. Due to the continuous release of drugs, drugs increase their accumulation at the site of infection, causing a more significant effect on the chronic and acute phases of brucellosis.

Intranasally administered melatonin core-shell polymeric nanocapsules: A promising treatment modality for cerebral ischemia

AIMS

The neurohormone melatonin (MEL) has been reported as a promising neuroprotective molecule, however it suffers pharmaceutical limitations such as poor solubility and low bioavailability, which hinder its pharmacological and clinical potential. In the current work, MEL was loaded in core-shell nanocarrier system; polymeric nanocapsules (PNCs), and assessed for its potential in cerebral ischemia reperfusion injury rat model when administered intranasally.

KEY FINDINGS

Adopting a D-optimal factorial design, MEL-PNCs were successfully formulated using the nanoprecipitation technique. MEL-PNCs exhibited a particle size ranging from 143.5 to 444 nm, negative zeta potential values ranging from -24.2 to -38.7 mV, cumulative release % for MEL ranging from 36.79 to 41.31 % over 8 h period, with overall good storage properties. The selected MEL-PNCs formulation displayed 8-fold higher permeation than the drug solution across sheep nasal mucosa. MEL-PNCs administered intranasally decreased oxidative stress and hippocampal inflammation, and the histological examination revealed the significant restoration of hippocampal neurons.

SIGNIFICANCE

MEL-PNCs administered intranasally could be a promising treatment modality in brain ischemia.

Improving the oral delivery of benznidazole nanoparticles by optimizing the formulation parameters through a design of experiment and optimization strategy

Chagas disease is a neglected tropical disease affecting the American continent and also some regions of Europe. Benznidazole, approved by FDA, is a drug of choice but its poor aqueous solubility may lead to a low bioavailability and efficacy. Therefore, the aim of this study was to formulate nanoparticles of benznidazole for improving its solubility, dissolution and permeability. A Plackett-Burman design was applied to identify the effect of 5 factors over 4 responses. Then, a Central Composite design was applied to estimate the values of the most important factors leading to the best compromise between highest nanoprecipitation efficiency, drug solubility and lower particle size. The optimized nanoparticles were evaluated for in vitro drug release in biorelevant media, stability studies and transmission electron microscopy. Biocompatibility and permeability of nanoparticles were evaluated on the Caco-2 cell line. The findings of the optimization process indicated that concentration of drug and stabilizer influenced significantly the particle size while concentration of stabilizer and organic/water phase volume ratio mainly influenced the drug solubility. Stability studies suggested that benznidazole nanoparticles were stable after 12 months at different temperatures. Minimal interactions of those nanoparticles and mucin glycoproteins suggested favorable properties to address the intestinal mucus barrier. Cell viability studies confirmed the safety profile of the optimized formulation and showed an increased permeation through the Caco-2 cells. Thus, this study confirmed the suitability of the design of experiment and optimization approach to elucidate critical parameters influencing the quality of benznidazole nanoparticles, which could lead to a more efficient management of Chagas disease by oral route.

Preparation of Terbinafin-Encapsulated Solid Lipid Nanoparticles Containing Antifungal Carbopol® Hydrogel with Improved Efficacy: In Vitro, Ex Vivo and In Vivo Study

The present research was aimed to develop a terbinafin hydrochloride (TH)-encapsulated solid lipid nanoparticles (SLNs) hydrogel for improved antifungal efficacy. TH-loaded SLNs were obtained from glyceryl monostearate (lipid) and Pluronic® F68 (surfactant) employing high-pressure homogenization. The ratio of drug with respect to lipid was optimized, considering factors such as desired particle size and highest percent encapsulation efficiency. Lyophilized SLNs were then incorporated in the hydrogel prepared from 0.2–1.0% w/v carbopol 934P and further evaluated for rheological parameters. The z-average, zeta potential and polydispersity index were found to be 241.3 nm, −15.2 mV and 0.415, respectively. The SLNs show a higher entrapment efficiency of about 98.36%, with 2.12 to 6.3602% drug loading. SEM images, XRD and the results of the DSC, FTIR show successful preparation of SLNs after freeze drying. The TH-loaded SLNs hydrogel showed sustained drug release (95.47 ± 1.45%) over a period of 24 h. The results reported in this study show a significant effect on the zone of inhibition than the marketed formulation and pure drug in Candida albicans cultures, with better physical stability at cooler temperatures. It helped to enhance skin deposition inthe ex vivostudy and improved, in vitro and in vivo, the antifungal activity.

Co-Delivery of Doxycycline and Hydroxychloroquine Using CdTe-Labeled Solid Lipid Nanoparticles for Treatment of Acute and Chronic Brucellosis

Brucellosis is a systemic disease in both acute and chronic forms which can affect any organ or tissue in the body. One of the biggest issues in treating this disease is its relapse. In this study, a complete treatment of brucellosis was evaluated using enhanced performance of doxycycline and hydroxychloroquine drugs by using solid lipid nanoparticles (SLN) conjugated cadmium-telluride quantum dots. The double emulsion method was used to prepare SLN and cadmium-telluride quantum dots. The physicochemical properties of NPs were determined. The effect of nanoparticle-loaded antibiotics against Brucella melitensis was determined by well diffusion, minimum inhibitory concentration (MIC), cell culture, and animal studies. The means of particle size, PDI, zeta potential, drugs loading, and encapsulation efficiency were 214 ± 25 nm, 0.385 ± 0.022, −18.7 ± 2.3 mV, 17.7 ± 1.5%, and 94.15 ± 2.6%, respectively. The results of FTIR and DSC showed that no chemical reaction occurred between the components of the NPs. The effect of free drug and NPs on bacteria was the same by well diffusion and MIC method. Drug-loaded NPs significantly reduced the number of CFUs in the cell line and acute and chronic brucellosis compared to the free drug. In conclusion, the synthesized nanoparticles were safe and green. With the slow release of the drug (100 h), the accumulation of the drug at the bacterial site increases and causes a greater effect on the B. melitensis and improves the disease of brucellosis. The use of synthesized nanodrugs in this study had promising therapeutic results.

Silibinin loaded inhalable solid lipid nanoparticles for lung targeting

AIM

In the current study, efforts are being made to prepare Inhalable Silibinin loaded solid lipid nanoparticles (SLNs) with narrow size distribution with improved bioavailability.

METHODS

SLNs were formulated by high shear homogenisation method SLNs were characterised, including Differential Scanning Calorimetry (DSC), Fourier transform infra-red spectroscopy (FTIR), particle size analysis, entrapment efficiency with Aerodynamic behaviour. The MTT assay was performed against A549 cell line, to measure their anticancer cell activity with In vivo study.

RESULTS

Optimized formulation exhibited spherical surface with a mean particle size of 221 ± 1.251 nm, PI of 0.121 ±  0.081, zeta potential of -4.12 ± 0.744. Aerodynamic behaviour such as Mass median aerodynamic diameter (MMAD) and Geometric size distribution (GSD) were found to be 5.487 ± 0.072 and 2.321 ± 0.141 respectively proved formulation is suitable for inhalation. In vitro cellular efficacy against A549 cells, revealed that the optimised formulations were more effective and potent.

CONCLUSION

The Inhalable SLNs approach was successfully engineered and administered to the lungs safely without causing any problems.

Supersaturated LFCS type III self-emulsifying delivery systems of sorafenib tosylate with improved biopharmaceutical performance: QbD-enabled development and evaluation

The current studies investigate the application of quality by design-enabled type III self-emulsifying delivery system (Type III-SEDDS) of sorafenib tosylate (SFN) in improving its biopharmaceutical attributes. Initially, lipidic and emulsifying excipients were selected by carrying out solubility and phase titration experiments. After screening studies using Taguchi OA design, Type III-SEDDS were further optimised using D-optimal mixture design. The prepared formulations were assessed for globule size, zeta potential and percent of drug release. Following graphical optimisation, the optimum formulation was earmarked and further supersaturated to form saturated Type III-SEDDS (Sat-Type III-SEDDS) using a combination of HPMC and PVP to improve the stability of the formulation for a prolonged period. In vitro drug release of Type III-SEDDS study indicated approximately 8-fold improvement in dissolution rate over the pure powder drug. Cell uptake studies demonstrated higher uptake of dye-loaded Type III-SEDDS formulations in Caco-2 cells vis-à-vis plain dye. Cytotoxicity assay on Hep G2 cells revealed significant reduction in cell growth with Type III- and Sat-Type III-SEDDS vis-à-vis the pure drug. Furthermore, in situ permeation studies carried out using Wistar rats exhibited nearly 8.3- to 10.2-fold augmentation in permeation and absorption parameters of the drug from the Type III- and Sat-Type III-SEDDS, respectively, vis-à-vis the pure drug. Pharmacokinetic studies indicated nearly 3.98- and 3.62-fold improvement in AUC_0-72, and 8.01- and 5.42-fold in C_max, along with 0.25-fold decrease in T_max of the drug from Type III- and Sat-Type III-SEDDS, respectively, in comparison with the SFN suspension. Furthermore, high degree of level A linear correlation was established between fractions of drug dissolved (in vitro) and of drug absorbed (in vivo) at the corresponding time points for Sat-Type III-SEDDS and pure drug, whereas the Type III-SEDDS exhibited a nonlinear relationship. Stability studies indicated the robustness of Sat-Type III-SEDDS, when stored at 25 °C for 3 months. Overall, the manuscript documents the successful systematic development of SFN-loaded Sat-Type III-SEDDS with distinctly improved biopharmaceutical performance. Graphical abstract.

Encapsulation of Imatinib in Targeted KIT-5 Nanoparticles for Reducing its Cardiotoxicity and Hepatotoxicity

BACKGROUND

Using imatinib, a tyrosine kinase inhibitor drug used in lymphoblastic leukemia, has always had limitations due to its cardiotoxicity and hepatotoxicity side effects. The objective of this study is to develop a target-oriented drug carrier to minimize these adverse effects by the controlled release of the drug.

METHODS

KIT-5 nanoparticles were functionalized with 3-aminopropyltriethoxysilane and conjugated to rituximab as the targeting agent for the CD20 positive receptors of the B-cells. Then they were loaded with imatinib and their physical properties were characterized. The cell cytotoxicity of the nanoparticles was studied by MTT assay in Ramos (CD20 positive) and Jurkat cell lines (CD20 negative) and their cellular uptake was shown by fluorescence microscope. Wistar rats received an intraperitoneal injection of 50 mg/kg of the free drug or targeted nanoparticles for 21 days. Then the level of aspartate Aminotransferase (AST), alanine Aminotransferase (ALT), Alkaline Phosphatase (ALP) and Lactate Dehydrogenase (LDH) were measured in serum of animals. The cardiotoxicity and hepatotoxicity of the drug were also studied by hematoxylin and eosin staining of the tissues.

RESULTS

The targeted nanoparticles of imatinib showed to be more cytotoxic to Ramos cells rather than Jurkat cells. The results of the biochemical analysis displayed a significant reduction in AST, ALT, ALP, and LDH levels in animals treated with targeted nanoparticles, compared to the free drug group. By comparison with the free imatinib, histopathological results represented less cardiotoxicity and hepatotoxicity in the animals, which received the drug through the current designed delivery system.

CONCLUSION

The obtained results confirmed that the rituximab targeted KIT-5 nanoparticles are promising in the controlled release of imatinib and could decrease its cardiotoxicity and hepatotoxicity side effects.

Olanzapine Loaded Nanostructured Lipid Carriers via High Shear Homogenization and Ultrasonication

The aim of this study was to understand the effect of high shear homogenization (HSH) and ultrasonication (US) on the physicochemical properties of blank and olanzapine loaded nanostructured lipid carriers (NLCs) along with their drug loading potential and drug release profiles from formulated particles. NLCs were prepared with different ratios of Compritol and Miglyol as the solid and liquid lipids, respectively, under changing HSH and US times between 0 to 15 min. The surfactants (Poloxamer 188 (P188) and tween 80) and the drug content was kept constant in all formulations. The prepared NLCs were evaluated for particle size, polydispersity index, zeta potential, drug crystallinity and chemical interactions between lipids and OLZ. The in-vitro drug release was performed using dialysis tube method in phosphate buffer solution (PBS) at pH 7.4. The formulated NLCs were negatively charged, spherically shaped and monodisperse, with particle sizes ranging from 112 to 191 nm. There was a significant influence of US time on the preparation of NLCs in comparison to HSH, where a significant reduction in the mean particle diameter was seen after 5 min of sonication. An increase of Miglyol content in NLCs led to an increase in particle size. In general, application of US led to decrease in particle size after HSH but an increase in particle diameter of low Miglyol containing preparation was also observed with longer sonication time. OLZ was successfully encapsulated in the NLCs and a total release of 89% was achieved in 24 h in PBS at pH 7.4.

Design of experiments (DoE) to develop and to optimize nanoparticles as drug delivery systems

Nanotechnology has been widely applied to develop drug delivery systems to improve therapeutic performance. The effectiveness of these systems is intrinsically related to their physicochemical properties, so their biological responses are highly susceptible to factors such as the type and quantity of each material that is employed in their synthesis and to the method that is used to produce them. In this context, quality-oriented manufacturing of nanoparticles has been an important strategy to understand and to optimize the factors involved in their production. For this purpose, Design of Experiment (DoE) tools have been applied to obtain enough knowledge about the process and hence achieve high-quality products. This review aims to set up the bases to implement DoE as a strategy to improve the manufacture of nanocarriers and to discuss the main factors involved in the production of the most common nanocarriers employed in the pharmaceutical field.

Plumbagin-Loaded Glycerosome Gel as Topical Delivery System for Skin Cancer Therapy

Plumbagin (PLM) is a phytochemical which has shown cytotoxicity against of cancer cells both in vitro and in vivo. However, the clinical application of PLM has been hindered due to poor aqueous solubility and low bioavailability. The aim of the present study was to develop, optimize and evaluate PLM-loaded glycerosome (GM) gel and compare with conventional liposome (CL) for therapeutic efficacy against skin cancer. The GM formulations were optimized by employing design expert software by 3-level 3-factor design. The prepared GMs were characterized in vitro for vesicle size, size distribution, zeta potential, vesicle deformability, drug release, skin permeation, retention, texture, antioxidant and cytotoxicity activities. The optimized formulation showed a vesicle size of 119.20 ± 15.67 nm with a polydispersity index (PDI) of 0.145 ± 0.02, the zeta potential of −27 ± 5.12 mV and entrapment efficiency of 76.42 ± 9.98%. The optimized PLM-loaded GM formulation was transformed into a pre-formed gel which was prepared using Carbopol 934 polymer. The drug diffusion fluxes of CL gel and GM-loaded gel were 23.31 ± 6.0 and 79.43 ± 12.43 µg/cm²/h, respectively. The result of texture analysis revealed the adequate hardness, cohesiveness, consistency, and viscosity of the developed GM-loaded gel compared to CL gel. The confocal images showed that glycerosomal gel has deeper skin layer penetration as compared to the control solution. GM-loaded gel treated rat skin showed significantly (p < 0.05) higher drug accumulation in the dermis, higher cytotoxicity and higher antioxidant activity as compared to CL gel and PLM suspension. Thus, findings revealed that novel GM-loaded gel could be potential carriers for therapeutic intervention in skin cancer.

An efficient approach for development and optimisation of curcumin-loaded solid lipid nanoparticles' patch for transdermal delivery

This study aimed to develop and optimise a Curcumin-loaded SLNs (C-SLNs) patch through a new approach for transdermal delivery. C-SLNs were optimised through the response surface central composite design using the modified injection method. Optimised C-SLNs were loaded into a polyvinyl alcohol-based patch through the backing membrane method. Compatibility studies (FTIR, XRPD), in vitro release, ex vivo skin permeation, accelerated stability, and evaluation studies of the patch were also performed. Prepared C-SLNs exhibited average particle diameter of 170 ± 2 nm with an encapsulation efficiency of 90 ± 3.5% (w/w) while SEM illustrated spherical shape of particles. In vitro release data ensured a sustained release for up to 72 hours. The enhancement ratio of C-SLNs based patch with permeation enhancer (PE) was high up to 6.5 folds as compared to patch without PE. It is concluded that the modified injection method is simple, economical, and less time consuming for the development of C-SLNs patch for the transdermal route.

Development of orally administered insulin-loaded polymeric-oligonucleotide nanoparticles: statistical optimization and physicochemical characterization

INTRODUCTION

Therapeutic peptides are administered via parenteral route due to poor absorption in the gastrointestinal (GI) tract, instability in gastric acid, and GI enzymes. Polymeric drug delivery systems have achieved significant interest in pharmaceutical research due to its feasibility in protecting proteins, tissue targeting, and controlled drug release pattern.

MATERIALS AND METHODS

In this study, the size, polydispersity index, and zeta potential of insulin-loaded nanoparticles were characterized by dynamic light scattering and laser Doppler micro-electrophoresis. The main and interaction effects of chitosan concentration and Dz13Scr concentration on the physicochemical properties of the prepared insulin-loaded nanoparticles (size, polydispersity index, and zeta potential) were evaluated statistically using analysis of variance. A robust procedure of reversed-phase high-performance liquid chromatography was developed to quantify insulin release in simulated GI buffer. Results and discussion: We reported on the effect of two independent parameters, including polymer concentration and oligonucleotide concentration, on the physical characteristics of particles. Chitosan concentration was significant in predicting the size of insulin-loaded CS-Dz13Scr particles. In terms of zeta potential, both chitosan concentration and squared term of chitosan were significant factors that affect the surface charge of particles, which was attributed to the availability of positively-charged amino groups during interaction with negatively-charged Dz13Scr. The excipients used in this study could fabricate nanoparticles with negligible toxicity in GI cells and skeletal muscle cells. The developed formulation could conserve the physicochemical properties after being stored for 1 month at 4 °C.

CONCLUSION

The obtained results revealed satisfactory results for insulin-loaded CS-Dz13Scr nanoparticles (159.3 nm, pdi 0.331, -1.08 mV). No such similar study has been reported to date to identify the main and interactive significance of the above parameters for the characterization of insulin-loaded polymeric-oligonucleotide nanoparticles. This research is of importance for the understanding and development of protein-loaded nanoparticles for oral delivery.

Overcoming clofazimine intrinsic toxicity: statistical modelling and characterization of solid lipid nanoparticles

The aim of this work was to develop solid lipid nanoparticles (SLNs) loaded with clofazimine (CLZ) (SLNs-CLZ) to overcome its intrinsic toxicity and low water solubility, for oral drug delivery. A Box-Behnken design was constructed to unravel the relations between the independent variables in the selected responses. The optimized SLNs-CLZ exhibited the following properties: particle size ca 230 nm, zeta potential of -34.28 mV, association efficiency of 72% and drug loading of 2.4%, which are suitable for oral delivery. Further characterization included Fourier transformed infrared spectroscopy that confirmed the presence of the drug and the absence of chemical interactions. By differential scanning calorimetry was verified the amorphous state of CLZ. The storage stability studies ensured the stability of the systems over a period of 12 weeks at 4°C. In vitro cytotoxicity studies evidenced no effect of both drug-loaded and unloaded SLNs on MKN-28 gastric cells and on intestinal cells, namely Caco-2 and HT29-MTX cells up to 25 µg ml^-1 in CLZ. Free CLZ solutions exhibited IC₅₀ values of 16 and 20 µg ml^-1 for Caco-2 and HT29-MTX cells, respectively. It can be concluded that the optimized system, designed considering important variables for the formulation of poorly soluble drugs, represents a promising platform for oral CLZ delivery.

Ultrahigh verapamil-loaded controlled release polymeric beads using superamphiphobic substrate: D-optimal statistical design, in vitro and in vivo performance

Controlled-release multiparticulate systems of hydrophilic drugs usually suffer from poor encapsulation and rapid-release rate. In the present study, ultra-high loaded controlled release polymeric beads containing verapamil hydrochloride (VP) as hydrophilic model drug were efficiently prepared using superamphiphobic substrates aiming to improve patient compliance by reducing dosing frequency. Superamphiphobic substrates were fabricated using clean aluminum sheets etched with ammonia solution and were treated with 1.5% (w/v) perfluorodecyltriethoxysilane (PFDTS) alcoholic solution. The effect of the main polymer type (lactide/glycolide (PLGA) 5004A, PLGA 5010, and polycaprolactone (PCL)), copolymer (Eudragit RS100) content together with the effect of drug load on encapsulation efficiency (EE%) and in vitro drug release was statistically studied and optimized via D-optimal statistical design. In vivo pharmacokinetic study was carried out to compare the optimized system relative to the market product (Isoptin®). Results revealed that superamphiphobic substrates were successfully prepared showing a rough micro-sized hierarchical structured surface upon observing with scanning electron microscope and were confirmed by high contact angles of 151.60 ± 2.42 and 142.80°±05.23° for water and olive oil, respectively. The fabricated VP-loaded beads showed extremely high encapsulation efficiency exceeding 92.31% w/w. All the prepared systems exhibited a controlled release behavior with Q12 h ranging between 5.46 and 95.90%w/w. The optimized VP-loaded system composed of 150 mg (1.5% w/v) PCL without Eudragit RS100 together with 160 mg VP showed 2.7-folds mean residence time compared to the market product allowing once daily administration instead of three times per day.

Hyaluronic acid-capped compact silica-supported mesoporous titania nanoparticles for ligand-directed delivery of doxorubicin

Mesoporous titania nanoparticles (MTN), owing to their high surface area to volume ratio and tunable pore sizes, appear capable of delivering sizable amounts of drug payloads, and hence, show considerable promise as drug delivery candidates in cancer therapy. We designed silica-supported MTN (MTNst) coated with hyaluronic acid (HA) to effectively deliver doxorubicin (DOX) for breast cancer therapy. The HA coating served a dual purpose of stabilizing the payload in the carriers as well as actively targeting the nanodevices to CD44 receptors. The so-formed HA-coated MTNst carrying DOX (HA/DOX-MTNst) had spheroid particles with a considerable drug-loading capacity and showed significantly superior in vitro cytotoxicity against MDA-MB-231 cells as compared to free DOX. HA/DOX-MTNst markedly improved the cellular uptake of DOX in an apparently CD44 receptor-dependent manner, and increased the number of apoptotic cells as compared to free DOX. These nanoplatforms accumulated in large quantities in the tumors of MDA-MB-231 xenograft tumor-bearing mice, where they significantly enhanced the inhibition of tumor growth compared to that observed with free DOX with no signs of acute toxicity. Based on these excellent results, we deduced that HA/DOX-MTNst could be successfully used for targeted breast cancer therapy. STATEMENT OF SIGNIFICANCE: This is the first study to use silica-supported mesoporous titania nanoparticles (MTNst) for doxorubicin (DOX) delivery to treat breast cancer, which exhibited effective and enhanced in vitro and in vivo apoptosis and tumor growth inhibition. Solid silica was used to support the mesoporous TiO₂ resulting in MTNst, which efficiently incorporated a high DOX payload. The hyaluronic acid (HA) coating over the MTNst surface served a dual purpose of first, stabilizing DOX inside the MTNst (capping agent), and second, directing the nanoplatform device to CD44 receptors that are highly expressed in MDA-MB-231 cells (targeting ligand). The NPs exhibited highly efficacious in vitro tumor-cell killing and excellent in vivo tumor regression, highlighting the enormous promise of this system for breast cancer therapy.

Application of Mixture Design Response Surface Methodology for Combination Chemotherapy in PC-3 Human Prostate Cancer Cells

Combining chemotherapeutics to treat malignant tumors has been shown to be effective in preventing drug resistance, tumor recurrence, and reducing tumor size. We modeled combination drug therapy in PC-3 human prostate cancer cells using mixture design response surface methodology (MDRSM), a statistical technique designed to optimize compositions that we applied in a novel manner to design combinations of chemotherapeutics. Conventional chemotherapeutics (mitoxantrone, cabazitaxel, and docetaxel) and natural bioactive compounds (resveratrol, piperlongumine, and flavopiridol) were used in 12 different combinations containing three drugs at varying concentrations. Cell viability and cell cycle data were collected and used to plot response surfaces in MDRSM that identified the most effective concentrations of each drug in combination. MDRSM allows for extrapolation of data from three or more compounds in variable ratio combinations, unlike the Chou-Talalay method. MDRSM combinations were compared with combination index data from the Chou-Talalay method and were found to coincide. We propose MDRSM as an effective tool in devising combination treatments that can improve treatment effectiveness and increase treatment personalization, because MDRSM measures effectiveness rather than synergism, potentiation, or antagonism.

Polyamino Acid Layer-by-Layer (LbL) Constructed Silica-Supported Mesoporous Titania Nanocarriers for Stimuli-Responsive Delivery of microRNA 708 and Paclitaxel for Combined Chemotherapy

Cellular Fas-associated protein with death domain-like interleukin-1β-converting enzyme-inhibitory protein (c-FLIP), often strongly expressed in numerous cancers, plays a pivotal role in thwarting apoptosis and inducing chemotherapy resistance in cancer. An integrated approach combining chemotherapy with suppression of c-FLIP levels could prove paramount in the treatment of cancers with c-FLIP overexpression. In this study, we utilized a polymeric layer-by-layer (LbL) assembly of silica-supported mesoporous titania nanoparticles (MTNst) to co-deliver paclitaxel (PTX) and microRNA 708 (miR708) for simultaneous chemotherapy and c-FLIP suppression in colorectal carcinoma. The resulting LbL miR708/PTX-MTNst showed dose-dependent cytotoxicity in HCT-116 and DLD-1 colorectal carcinoma cell lines, which was remarkably superior to that of free PTX or LbL PTX-MTNst. LbL miR708/PTX-MTNst strongly inhibited c-FLIP expression and resulted in increased expression of proapoptotic proteins. In DLD-1 xenograft tumor-bearing mice, the nanoparticles accumulated in the tumor, resulting in remarkable tumor regression, with the PTX and miR708-loaded nanoparticles showing significantly greater inhibitory effects than the free PTX or PTX-loaded nanoparticles. Immunohistochemical analyses of the tumors further confirmed the remarkable apoptotic and antiproliferative effects of the nanoparticles, whereas organ histology reinforced the biocompatibility of the system. Therefore, the LbL miR708/PTX-MTNst system, owing to its ability to deliver both chemotherapeutic drug and inhibitory miRNA to the tumor site, shows great potential to treat colorectal carcinoma in clinical settings.

Single synchronous delivery of FK506-loaded polymeric microspheres with pancreatic islets for the successful treatment of streptozocin-induced diabetes in mice

Immune rejection after transplantation is common, which leads to prompt failure of the graft. Therefore, to prolong the survival time of the graft, immunosuppressive therapy is the norm. Here, we report a robust immune protection protocol using FK506-loaded microspheres (FK506M) in injectable hydrogel. Pancreatic islets were codelivered with the FK506M into the subcutaneous space of streptozocin-induced diabetic mice. The islets codelivered with 10 mg/kg FK506M maintained normal blood glucose levels during the study period (survival rate: 60%). However, transplantation of islets and FK506M at different sites hardly controlled the blood glucose level (survival rate: 20%). Immunohistochemical analysis revealed an intact morphology of the islets transplanted with FK506M. In addition, minimal number of immune cells invaded inside the gel of the islet-FK506M group. The single injection of FK506M into the local microenvironment effectively inhibited immune rejection and prolonged the survival time of transplanted islets in a xenograft model.

Investigation of Need of Natural Bioenhancer for a Metabolism Susceptible Drug-Raloxifene, in a Designed Self-Emulsifying Drug Delivery System

Bioenhancers can increase the bioavailability of metabolism susceptible drugs. The present study was designed to understand the impact of bioenhancer on permeability and bioavailability of a biopharmaceutical drug disposition classification system (BDDCS) class II drug raloxifene (RLX). RLX undergoes extensive first pass metabolism by UGT enzymes in gastrointestinal tract (GIT) and has an oral bioavailability of about 2%. Self-emulsifying drug delivery system (SEDDS) of RLX was developed using a designed approach and this formulation was loaded with reported bioenhancers: quercetin and piperine. These formulations were tested for improvement in permeability and bioavailability of the RLX. The apparent permeability using everted gut sac (P _app) for SEDDS (5.26 ± 1.10 × 10^-8 cm/s) was found to be similar to that of SEDDS with bioenhancers (5.11 ± 1.05 × 10^-8 cm/s). In oral bioavailability study in rat, SEDDS demonstrated a 4-fold and 2.5-fold higher AUC_0-∞ than RLX suspension (control) and marketed product, respectively. No additional improvement in permeability and bioavailability was offered by inclusion of piperine and quercetin (bioenhancers) in the SEDDS.

In vivo fate of lipid-silybin conjugate nanoparticles: Implications on enhanced oral bioavailability

Lipid-drug conjugates (LDCs) of a poorly soluble and poorly permeable drug silybin (SB) and lipids with different chain lengths (6C, 12C, 18C) are synthesized and formulated into solid lipid nanoparticles (SLNs). The in vivo fate of LDCs as well as SLNs is investigated by tracking either SB or LDCs or SLNs. LDCs are prone to be hydrolyzed by lipases either in simulated gastrointestinal media or in Caco-2 cell lines in a lipid chain length-dependent mode. The oral bioavailability of SB is enhanced by 5-7-fold in comparison with a fast-release formulation. No integral LDCs are detected in plasma confirms the readily degradable nature of LDCs. The absorption of LDCs by enteric epithelia and subsequent transportation into circulation might play a leading role in absorption enhancement, whereas the contribution of then M-cell pathway is not as remarkable. A shorter lipid chain favors earlier lipolysis and faster absorption along the intestine-to-circulation path.

Preparation and Optimization of Immediate Release/Sustained Release Bilayered Tablets of Loxoprofen Using Box-Behnken Design

The aim of our current study was to characterize and optimize loxoprofen immediate release (IR)/sustained release (SR) tablet utilizing a three-factor, three-level Box-Behnken design (BBD) combined with a desirability function. The independent factors included ratio of drug in the IR layer to total drug (X ₁), ratio of HPMC to drug in the SR layer (X ₂), and ratio of Eudragit RL PO to drug in the SR layer (X ₃). The dependent variables assessed were % drug released in distilled water at 30 min (Y ₁), % drug released in pH 1.2 at 2 h (Y ₂), and % drug released in pH 6.8 at 12 h (Y ₃). The responses were fitted to suitable models and statistical validation was performed using analysis of variance. In addition, response surface graphs and contour plots were constructed to determine the effects of different factor level combinations on the responses. The optimized loxoprofen IR/SR tablets were successfully prepared with the determined amounts of ingredients that showed close agreement in the predicted and experimental values of tablet characterization and drug dissolution profile. Therefore, BBD can be utilized for successful optimization of loxoprofen IR/SR tablet, which can be regarded as a suitable substitute for the current marketed formulations.

Folate receptor-targeted hybrid lipid-core nanocapsules for sequential delivery of doxorubicin and tanespimycin

When exposed to cancer cells, cytotoxic drugs such as doxorubicin (DOX) can lead to the induction of heat shock protein 90 (Hsp90), a molecular chaperone associated with a number of cancer-related client proteins, and result in cell survival. Co-administration of DOX with tanespimycin (TNP), an Hsp90 inhibitor, can sensitize the cancer cells to the cytotoxic effects of DOX. The effect of such a combination has been found to depend on the schedule of administration. Sequential administration of DOX and TNP has been linked to highly synergistic combination effects. Therefore, we aimed to develop folate-receptor targeted hybrid lipid-core nanocapsules comprising a hybrid lipid core lodging TNP and a polymeric corona lodging DOX (F-DTN). These nanocarriers were capable of delivering DOX and TNP sequentially, which was well demonstrated by an in vitro release study. The in vitro release profiles displayed pH-dependent and sustained release features. F-DTN exhibited excellent morphological characteristics with highly monodispersed particles. In vitro tests with F-DTN in MCF-7 cell line demonstrated exceptional cytotoxicity, with high cellular uptake and apoptosis. These findings were appreciably more assertive than tests with free individual drugs (DOX, TNP), free drug combination (DOX/TNP), or non-folate receptor-targeted hybrid lipid-core nanocapsules (DTN). In vivo pharmacokinetic study revealed noticeable enhancement of bioavailability and plasma circulation time of the drugs when encapsulated in the carrier system. Therefore, hybrid lipid-core nanocapsules have the potential to be utilized for application in folate receptor-targeted combination chemotherapy.

Development of Bioactive PEGylated Nanostructured Platforms for Sequential Delivery of Doxorubicin and Imatinib to Overcome Drug Resistance in Metastatic Tumors

Metastasis of cancers accounts for almost all cancer-related deaths. In this study, we report a PEGylated nanostructured platform for coadministration of doxorubicin (DOX) and imatinib (IMT) intended to effectively inhibit metastatic tumors. The DOX and IMT coloaded nanostructured system (DOX/IMT-N) is characterized by an excellent encapsulation potential for both drugs and shows sequential and sustained drug release in vitro. DOX/IMT-N significantly inhibited the in vitro proliferation of MDA-MB-231 and SK-MEL-28 cells. The inhibitory effect on in vitro proliferation of the cells was significantly greater than the effect of free DOX, DOX/IMT cocktail, or the nanostructured system housing DOX only (DOX-N). DOX/IMT-N remarkably enhanced cellular drug uptake, resulting in enhanced apoptosis, caused by significant increases in the expression levels of apoptotic marker proteins. Intravenous administration of DOX/IMT-N to MBA-MB-231 xenograft tumor-bearing mice resulted in significantly improved inhibition of tumor progression compared to that with DOX, DOX/IMT, or DOX-N. Therefore, the nanostructured DOX/IMT-N system could potentially aid in overcoming drug resistance in metastatic tumors and improve the effectiveness of metastatic tumor therapeutics.

A three-dimensional assemblage of gingiva-derived mesenchymal stem cells and NO-releasing microspheres for improved differentiation

Stem cell therapy is an attractive approach to bone tissue regeneration. Nitric oxide (NO) has been reported to facilitate osteogenic differentiation of stem cells. To enhance osteogenic differentiation of gingiva-derived mesenchymal stem cells (GMSCs), we designed a method for in situ delivery of exogenous NO to these cells. A NO donor, polyethylenimine/NONOate, was incorporated into poly(lactic-co-glycolic acid) microspheres to deliver NO to the cells for an extended period of time under in vitro culture conditions. A hybrid aggregate of GMSCs and NO-releasing microspheres was prepared by the hanging drop technique. Confocal microscopy revealed homogeneous arrangement of the stem cells and microspheres in heterospheroids. Western blot analysis and live-dead imaging showed no significant change in cell viability. Importantly, the in situ delivery of NO within the heterospheroids enhanced osteogenic differentiation indicated by a 1.2-fold increase in alkaline phosphatase activity and an approximately 10% increase in alizarin red staining. In addition, a low dose of NO promoted proliferation of the GMSCs in this 3D system. Thus, delivery of the NO-releasing microsphers to induce differentiation of stem cells within this three dimensional system may be one of possible strategies to direct differentiation of a stem cell-based therapeutic agent toward a specific lineage.