Physicochemical Properties of Bosentan and Selected PDE-5 Inhibitors in the Design of Drugs for Rare Diseases

Erectile Dysfunction Therapy of Bariatric Patients: Tadalafil Biopharmaceutics and Pharmacokinetics Before vs. After Gastric Sleeve/Bypass

Bariatric surgery introduces significant changes in the gastrointestinal tract, which may affect oral drug absorption/bioavailability. Here we investigate the phosphodiesterase-5 inhibitor (PDE5i) tadalafil for potentially impaired post-bariatric solubility/dissolution and absorption. Solubility was studied in vitro in different pHs, and ex vivo in gastric content aspirated from patients pre/post-surgery. Dissolution was studied in conditions mimicking pre/post-surgery stomach. Finally, the experimental data were used in physiologically-based pharmacokinetic (PBPK) model (GastroPlus®) to simulate pre- vs. post-surgery tadalafil PK. Tadalafil demonstrated low and pH-independent solubility, both in vitro and ex vivo. Tadalafil release from all drug products and under all gastric conditions was incomplete, with particularly poor dissolution (2%) of the highest dose under post-bariatric conditions. PBPK simulations revealed altered tadalafil PK after gastric bypass-but not after sleeve gastrectomy-compared to unoperated individuals, with 44-48% decreased Cmax, 35-56% decreased AUC and 44% shorter Tmax. This mechanistic analysis suggests that tadalafil may be as effective after sleeve gastrectomy as before the procedure; meanwhile, results after gastric bypass raise concerns regarding the bioperformance of the drug. In addition, the drug's duration of action may be much shorter after gastric bypass. Thus, the effectiveness of tadalafil, widely regarded as the 'weekend pill', may be shorter than expected among gastric bypass patients.

Bosentan monohydrate and sildenafil base as two companions in enabling formulations

HYPOTHESIS

Sildenafil base and bosentan monohydrate are co-administered in a chronic therapy of pulmonary arterial hypertension (PAH). Both drugs are poorly soluble in water, and their bioavailability is limited to ca. 50 %. Since bosentan is a weak acid, whereas sildenafil is a weak base, we assumed that their co-amorphization could: (i) improve their solubility in the gastrointestinal fluids, (ii) enable to reach supersaturation and (iii) ensure stabilization of supersaturated solutions. If successful, this could accelerate the development of new fixed-dose combination drugs.

EXPERIMENTS

The co-amorphous formulations were prepared using high energy ball milling. Their solid state properties were assessed using XRD, DSC, FT-MIR, and dielectric spectroscopy. Particle size distribution and surface wetting were also analyzed. Polarizing optical microscopy and scanning electron microscopy were applied to assess the microstructure of these powders. A new HPLC-DAD method was developed for a simultaneous quantification of both drugs.

FINDINGS

It was shown that binary formulations in which bosentan was molecularly dispersed in sildenafil base (Tg = 64-78 °C) could be manufactured in the high energy ball milling process. When the sildenafil load was below 50 wt. %, the formulations showed the greatest thermal stability and formed long-lasting bosentan supersaturation in PBS.

Preparation of orodispersible tablets of bosentan using xylitol and menthol as dissolution enhancers

Bosentan is a drug used to treat pulmonary hypertension via dual endothelial receptor antagonism. Bosentan has a restricted oral bioavailability, a problem that's mostly due to poor solubility and hepatic metabolism. It is extensively used for the elderly and children who require a friendly dosage form like orodispersible tablets. So, the goal of this research work was to hasten the dissolution rate of bosentan to produce an orodispersible tablet with immediate drug release. Bosentan was exposed to ethanol-assisted kneading with a rise of xylitol or menthol concentrations (1:1 and 1:2 molar ratio of bosentan with excipient). In addition to observing the dissolution behavior, the resulting dry products were investigated using Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), and X-ray diffraction (XRD). The FTIR reflected possible hydrogen bonding with xylitol and menthol. DSC studies reflected a reduction in the enthalpy and Tm. These results with XRD data reflected partial co-amorphization in the case of xylitol and eutaxia in the case of menthol. These modifications were related to an accelerated dissolving rate. The developed systems were fabricated as orodispersible tablets which exhibited immediate release of bosentan. Thus, the current study offered simple co-processing for the preparation of orodispersible bosentan tablets.

Development and pharmacokinetic evaluation of Neusilin® US2-based S-SNEDDS tablets for bosentan: Fasted and fed states bioavailability, IVIS® real-time biodistribution, and ex-vivo imaging

The study reported here aimed to develop and optimize the S-SNEDDS tablet of bosentan (BOS) and to investigate its pharmacokinetic and biodistribution properties. The BOS-loaded SNEDDS have been developed and characterized in a previous study. The BOS-loaded SNEDDS formulation was converted to S-SNEDDS using Neusilin® US2. The S-SNEDDS tablets were obtained using the direct compression technique, and in vitro dissolution, in vitro lipolysis, and ex-vivo permeability studies of the tablets were performed. The S-SNEDDS tablet and reference tablet (Tracleer®) were administered to male Wistar rats at 50 mg/kg dose by oral gavage in fasted and fed state conditions. The biodistribution of the S-SNEDDS tablet was investigated in Balb/c mice using fluorescent dye. The tablets were dispersed in distilled water before administration to animals. The relationship between in vitro dissolution data and in vivo plasma concentration was examined. The S-SNEDDS tablets showed 2.47, 7.49, 3.70, and 4.39 increases in the percentages of cumulative dissolution in FaSSIF, FeSSIF, FaSSIF-V2, and FeSSIF-V2, respectively, when compared to the reference, and increased the Cmax and AUC 2.65 and 1.28-fold and 4.73 and 2.37-fold in fasted and fed states, respectively, when compared to the reference. S-SNEDDS tablets also significantly reduced interindividual variability in both fasted and fed states (p < 0.05). The XenoLight™ DiR and VivoTag® 680XL labeled S-SNEDDS tablet formulation increased the real-time biodistribution in the body by factors of 2.4 and 3.4 and organ uptake and total emission increased by factors of 2.8 and 3.1, respectively. The IVIVR has been successfully established for S-SNEDDS tablets (R2 > 0.9). The present study confirms the potential of the S-SNEDDS tablet to enhance the in vitro and in vivo performance of BOS.

High energy ball milling vs. nano spray drying in the development of supersaturated systems loaded with bosentan

In this study, high energy ball milling and nano spray drying were used to prepare amorphous solid dispersions of bosentan in copovidone for the first time. In particular, the impact of this polymer on the bosentan amorphization kinetics was investigated. Copovidone was shown to facilitate the amorphization of bosentan upon ball milling. As a result, bosentan was dispersed in copovidone at the molecular level, forming amorphous solid dispersions, regardless of the ratio of the compounds. The similarity between the values of the adjustment parameter that describes the goodness of fit of the Gordon-Taylor equation to the experimental data (K = 1.16) and that theoretically calculated for an ideal mixture (K = 1.13) supported these findings. The kind of coprocessing method determined the powder microstructure and the release rate. The opportunity to prepare submicrometer-sized spherical particles using nano spray drying was an important advantage of this technology. Both coprocessing methods allowed the formation of long-lasting supersaturated bosentan solutions in the gastric environment with maximum concentrations reached ranging from four (11.20 μg/mL) to more than ten times higher (31.17 μg/mL) than those recorded when the drug was vitrified alone (2.76 μg/mL). Moreover, this supersaturation lasted for a period of time at least twice as long as that of the amorphous bosentan processed without copovidone (15 min vs. 30-60 min). Finally, these binary amorphous solid dispersions were XRD-amorphous for a year of storage under ambient conditions.

Fly casting with ligand sliding and orientational selection supporting complex formation of a GPCR and a middle sized flexible molecule

A GA-guided multidimensional virtual-system coupled molecular dynamics (GA-mD-VcMD) simulation was conducted to elucidate binding mechanisms of a middle-sized flexible molecule, bosentan, to a GPCR protein, human endothelin receptor type B (hETB). GA-mD-VcMD is a generalized ensemble method that produces a free-energy landscape of the ligand-receptor binding by searching large-scale motions accompanied with stable maintenance of the fragile cell-membrane structure. All molecular components (bosentan, hETB, membrane, and solvent) were represented with an all-atom model. Then sampling was conducted from conformations where bosentan was distant from the binding site in the hETB binding pocket. The deepest basin in the resultant free-energy landscape was assigned to native-like complex conformation. The following binding mechanism was inferred. First, bosentan fluctuating randomly in solution is captured using a tip region of the flexible N-terminal tail of hETB via nonspecific attractive interactions (fly casting). Bosentan then slides occasionally from the tip to the root of the N-terminal tail (ligand–sliding). During this sliding, bosentan passes the gate of the binding pocket from outside to inside of the pocket with an accompanying rapid reduction of the molecular orientational variety of bosentan (orientational selection). Last, in the pocket, ligand–receptor attractive native contacts are formed. Eventually, the native-like complex is completed. The bosentan-captured conformations by the tip-region and root-region of the N-terminal tail correspond to two basins in the free-energy landscape. The ligand-sliding corresponds to overcoming of a free-energy barrier between the basins.

Studies on the Vitrified and Cryomilled Bosentan

In this paper, several experimental techniques [X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry, Fourier transform infrared spectroscopy, and broad-band dielectric spectroscopy] have been applied to characterize the structural and thermal properties, H-bonding pattern, and molecular dynamics of amorphous bosentan (BOS) obtained by vitrification and cryomilling of the monohydrate crystalline form of this drug. Samples prepared by these two methods were found to be similar with regard to their internal structure, H-bonding scheme, and structural (α) dynamics in the supercooled liquid state. However, based on the analysis of α-relaxation times (dielectric measurements) predicted for temperatures below the glass-transition temperature (T_g), as well as DSC thermograms, it was concluded that the cryoground sample is more aged (and probably more physically stable) compared to the vitrified one. Interestingly, such differences in physical properties turned out to be reflected in the lower intrinsic dissolution rate of BOS obtained by cryomilling (in the first 15 min of dissolution test) in comparison to the vitrified drug. Furthermore, we showed that cryogrinding of the crystalline BOS monohydrate leads to the formation of a nearly anhydrous amorphous sample. This finding, different from that reported by Megarry et al. [Carbohydr. Res.2011, 346, 1061−106421492830] for trehalose (TRE), was revealed on the basis of infrared and thermal measurements. Finally, two various hypotheses explaining water removal upon cryomilling have been discussed in the manuscript.

Antibacterial, thermal decomposition and in vitro time release studies of chloramphenicol from novel PLA and PVA nanofiber mats

The present investigation is the first report containing design and synthesis of novel calixarene derivatives (6-8) and their inclusion complexes (IC6-IC8) with Chloramphenicol (CAM). After synthesis, the antibiotic CAM, calixarene derivatives (6-8) and their inclusion complexes (IC6-IC8) were successfully incorporated into biodegradable PVA and/or PLA nanofiber skeleton by electrospinning. The obtained electrospun nanofibers were tested and compared for inhibition of bacterial growth towards multiple bacterial species (Escherichia coli, and Bacillus subtilis). Moreover, we evaluated thermal decomposition and release profile of CAM by spectrophotometric methods. The results suggested that CAM can be successfully encapsulated in nanofiber webs by inclusion complexation, and these fibers could be used as a part of new controlled release packaging system for food preservation.

The Effect of Particle Size and Surface Roughness of Spray-Dried Bosentan Microparticles on Aerodynamic Performance for Dry Powder Inhalation

The purpose of this study was to prepare spray dried bosentan microparticles for dry powder inhaler and to characterize its physicochemical and aerodynamic properties. The microparticles were prepared from ethanol/water solutions containing bosentan using spray dryer. Three types of formulations (SD60, SD80, and SD100) depending on the various ethanol concentrations (60%, 80%, and 100%, respectively) were used. Bosentan microparticle formulations were characterized by scanning electron microscopy, powder X-ray diffraction, laser diffraction particle sizing, differential scanning calorimetry, Fourier-transform infrared spectroscopy, dissolution test, and in vitro aerodynamic performance using Andersen cascade impactor^™ (ACI) system. In addition, particle image velocimetry (PIV) system was used for directly confirming the actual movement of the aerosolized particles. Bosentan microparticles resulted in formulations with various shapes, surface morphology, and particle size distributions. SD100 was a smooth surface with spherical morphology, SD80 was a rough surfaced with spherical morphology and SD60 was a rough surfaced with corrugated morphology. SD100, SD80, and SD60 showed significantly high drug release up to 1 h compared with raw bosentan. The aerodynamic size of SD80 and SD60 was 1.27 µm and SD100 was 6.95 µm. The microparticles with smaller particle size and a rough surface aerosolized better (%FPF: 63.07 ± 2.39 and 68.27 ± 8.99 for SD60 and SD80, respectively) than larger particle size and smooth surface microparticle (%FPF: 22.64 ± 11.50 for SD100).

Novel propyl karaya gum nanogels for bosentan: In vitro and in vivo drug delivery performance

The amphiphilic propyl Karaya gum (KG) with a degree of propyl group substitution of 3.24 was synthesized to design self-assembled nanogels as carriers for bosentan monohydrate, a poorly soluble antihypertensive drug. The drug was physically hosted into the hydrophobic core of the micellar nanogels by solvent evaporation method. TEM images revealed spherical shape and core-shell morphology of the nanogels. Depending upon polymer: drug weight ratio, the drug entrapment efficiency of >85% was attained. The carriers had hydrodynamic diameter in the range of 230-305 nm with narrow size distribution. The zeta potential of -23.0 to -24.9 mV and low critical association concentration (CAC) of 8.32 mg/l provided evidence that the colloidal nanogel system was physically stable. Thermodynamics of the propyl KG system in water favored spontaneous self-assembly of propyl KG. FTIR, thermal and x-ray analyses suggested that the drug was compatible in the hydrophobic confines of the nanogels. The micellar nanogels liberated their contents in simulated gastrointestinal condition in a pH-dependent manner over a period of 10 h. Peppas-Sahlin modeling of in vitro drug release data suggested that the polymer relaxation/swelling mechanism dominated the drug release process. Pre-clinical testing of the mucoadhesive nanogel formulations exhibited that the system could monitor the anti-hypertensive activity for a prolonged period. Overall, this propyl KG micellar nanogel system had a great potential and splendid outlook to serve as novel oral controlled release carriers for poorly soluble drugs with outstanding pharmacodynamics.

A Retrospective Evaluation of Allometry, Population Pharmacokinetics, and Physiologically-Based Pharmacokinetics for Pediatric Dosing Using Clearance as a Surrogate

Physiologically-based pharmacokinetic models are increasingly applied for pediatric dose selection along with traditional methods such as allometry and population pharmacokinetic models. We report a retrospective evaluation of the three methods. Pediatric population pharmacokinetic models sourced from literature for a subset of eight compounds were used to predict clearances for children < 2 years when they were within the modeled age range (interpolation, N = 11) or including those outside the modeled age range (interpolation and extrapolation, N = 18). Pediatric/adult clearance ratios were evaluated with a strict performance criterion of 0.8-1.25 and with twofold criteria. For children > 2 years, 58-75% of the clinical studies (N = 10) met the strict criteria, and > 80% of the clinical studies were predicted within twofold by all three methods. For children < 2 years, physiologically-based pharmacokinetic, allometry with age-dependent exponents, and pediatric population pharmacokinetic models predict 54%, 82%, and 64% within twofold of the observed, respectively.

Preparation and characterization of bosentan monohydrate/ε-polycaprolactone nanoparticles obtained by electrospraying

The electrospraying technique provides nano and microparticles that can be used as drug delivery systems. The aims of this study were, firstly, to optimize the influent parameters of electrospraying for the manufacture of a Bosentan (BOS) nanoparticulate platform, and secondly, to evaluate its physicochemical properties and in vitro biopharmaceutical behavior. Particles were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), thermogravimetry (TG) and Fourier transformed Infrared spectroscopy (FTIR). Drug loading, encapsulation efficiency and kinetic dissolution were determined. Additionally, Bosentan release assays at 24 and 72 h were performed in vitro to evaluate biopharmaceutical properties of nano-scaffolds by diffusion technique through dialysis bag. The nanostructures had heterogeneous sizes predominantly smaller than 550 nm and they were semicrystalline according to PXRD, indicating a partial amorphization of BOS during the encapsulation in the polymer matrix. FT-IR and DSC showed an absence of chemical interactions between BOS and ε-Polycaprolactone (PCL), suggesting that both components behaved as a physical mixture in these particles. The drug loading was 25.98%, and the encapsulation efficiency was 58.51%. Additionally, the release assays showed an extended and controlled release of BOS, in comparison to non-encapsulated BOS. These data also showed to fit with the Cubic Root kinetic dissolution. As a conclusion, we demonstrate that the use of electrospraying for the manufacture of BOS (or similar drugs) controlled release nanoplatforms would represent an interesting contribution in the development of new therapeutic alternatives for the treatment of pathologies such as pulmonary hypertension and other related diseases. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2748, 2019.

Dual Level Statistical Investigation of Equilibrium Solubility in Simulated Fasted and Fed Intestinal Fluid

The oral route is the preferred option for drug administration but contains the inherent issue of drug absorption from the gastro-intestinal tract (GIT) in order to elicit systemic activity. A prerequisite for absorption is drug dissolution, which is dependent upon drug solubility in the variable milieu of GIT fluid, with poorly soluble drugs presenting a formulation and biopharmaceutical challenge. Multiple factors within GIT fluid influence solubility ranging from pH to the concentration and ratio of amphiphilic substances, such as phospholipid, bile salt, monoglyceride, and cholesterol. To aid in vitro investigation simulated intestinal fluids (SIF) covering the fasted and fed state have been developed. SIF media is complex and statistical design of experiment (DoE) investigations have revealed the range of solubility values possible within each state due to physiological variability along with the media factors and factor interactions which influence solubility. However, these studies require large numbers of experiments (>60) and are not feasible or sensible within a drug development setting. In the current study a smaller dual level, reduced experimental number (20) DoE providing three arms covering the fasted and fed states along with a combined analysis has been investigated. The results indicate that this small scale investigation is feasible and provides solubility ranges that encompass published data in human and simulated fasted and fed fluids. The measured fasted and fed solubility ranges are in agreement with published large scale DoE results in around half of the cases, with the differences due to changes in media composition between studies. Indicating that drug specific behaviors are being determined and that careful media factor and concentration level selection is required in order to determine a physiologically relevant solubility range. The study also correctly identifies the major single factor or factors which influence solubility but it is evident that lower significance factors (for example bile salt) are not picked up due to the lower sample number employed. A similar issue is present with factor interactions with only a limited number available for study and generally not determined to have a significant solubility impact due to the lower statistical power of the study. The study indicates that a reduced experimental number DoE is feasible, will provide solubility range results with identification of major solubility factors however statistical limitations restrict the analysis. The approach therefore represents a useful initial screening tool that can guide further in depth analysis of a drug's behavior in gastrointestinal fluids.

Cyclic guanosine monophosphate modulates accumulation of phosphodiesterase 5 inhibitors in human platelets

Sildenafil and tadalafil are widely-used phosphodiesterase 5 (PDE5) inhibitors for which no clear dose-response relationship could be established. Using isolated and/or recombinant PDE5, it has been demonstrated that cGMP can increase the affinity of this enzyme for sildenafil and tadalafil. We thus hypothesized that in cells expressing the nitric oxide - soluble guanylyl cyclase - cyclic guanosine monophosphate - PDE5 (NO-sGC-cGMP-PDE5) pathway such as platelets, the presence of NO increases the intracellular cGMP content and thus promotes the intracellular accumulation of sildenafil or tadalafil. As a cell model, isolated and washed human platelets were used. Platelet suspensions were incubated with sildenafil or tadalafil at different concentrations and for various time intervals with or without an NO donor to increase intraplatelet cGMP concentrations. Intracellular sildenafil or tadalafil was quantified by ultra-performance liquid chromatography tandem mass spectrometry and intracellular cGMP by an enzyme-linked immunosorbent assay. Sildenafil accumulated in platelets with an up to 4-fold higher accumulation when platelets were pretreated with an NO donor (p < .0001). Accumulation of tadalafil in platelets was even higher, whereas the increase was 2-fold when an NO donor was present (p < .001). This accumulation was time-dependent and happened concomitantly with a rise in intracellular cGMP. Our data demonstrate that intracellular cGMP increases intracellular PDE5 inhibitor concentrations most likely by raising the affinity of these compounds for PDE5. These findings suggest that PDE5 inhibitor action in humans is critically influenced by modulators of the activity of the NO pathway.