Self-Assembling Raloxifene Loaded Mixed Micelles: Formulation Optimization, In Vitro Cytotoxicity and In Vivo Pharmacokinetics

Discerning computational, in vitro and in vivo investigations of self-assembling empagliflozin polymeric micelles in type-2 diabetes

BACKGROUND

Empagliflozin (EMPA) is an SGLT2 inhibitor, a new class of anti-diabetic medication, indicated for treating type-2 diabetes. Its low permeability, poor solubility and bioavailability limits its use in management of diabetes. The study was aimed to formulate EMPA loaded polymeric micelles (PMs) to overcome these obstacles in oral absorption.

METHODOLOGY

In silico studies-molecular docking, molecular dynamic simulation (MDS), and quantum chemical calculation were employed to study the interaction of EMPA with different polymers. EMPA loaded TPGS polymeric micelles (EMPA-TPGS-PMs) were formulated by direct dissolution method and characterized in terms of surface morphology, entrapment, particle size, in vitro drug release, and in vitro cytotoxicity (HEK293 cells). In vivo pharmacokinetic and pharmacodynamic studies were also performed.

RESULTS

The results suggested a good interaction between TPGS and EMPA with lowest binding energy compared to other polymers. Further MDS results and DFT calculations validated the stable binding of the complex hence TPGS was selected for further wet lab experiments. The EMPA-TPGS complex displayed lower value of Total energy (T.E.) than its individual components, indicating the overall stability of the complex while, the energy band gap (∆E) value lied between the two individual molecules, signifying the better electron transfer between HOMO and LUMO of the complex. Based on the solubility, entrapment and cytotoxicity studies, 5% TPGS was selected for formulating drug loaded micelles. EMPA-TPGS5-PMs presented a size of 9.008 ± 1.25 nm, Polydispersity index (PDI) of 0.254 ± 0.100, a controlled release behaviour upto 24 h. SEM and AFM images of the nanoformulation suggested spherical particles whereas, DSC, and PXRD studies confirmed the loss of crystallinity of EMPA. A 3.12-folds higher AUC and a greater reduction in blood glucose levels was exhibited by EMPA-TPGS5-PMs in comparison to EMPA-SUSP in mice model.

CONCLUSION

EMPA-TPGS-PMs has exhibited better bio absorption and therapeutic effectiveness in diabetes treatment. This improved performance would open the possibility of dose reduction, reduced dosing frequency & dose-related side effects, improving pharmaco-economics and thereby improved overall compliance to the patient. However, this translation from bench to bedside would necessitate studies in higher animals and human volunteers.

Fabricating Polymer/Surfactant/Cyclodextrin Hybrid Particles for Possible Nose-to-Brain Delivery of Ropinirole Hydrochloride: In Vitro and Ex Vivo Evaluation

Ropinirole is a non-ergolinic dopamine agonist used to manage Parkinson's disease and it is characterized by poor oral bioavailability. This study aimed to design and develop advanced drug delivery systems composed of poloxamer 407, a non-ionic surfactant (Tween 80), and cyclodextrins (methyl-β-CD or hydroxy-propyl-β-CD) for possible brain targeting of ropinirole after nasal administration for the treatment of Parkinson's disease. The hybrid systems were formed by the thin-film hydration method, followed by an extensive physicochemical and morphological characterization. The in vitro cytotoxicity of the systems on HEK293 cell lines was also tested. In vitro release and ex vivo mucosal permeation of ropinirole were assessed using Franz cells at 34 °C and with phosphate buffer solution at pH 5.6 in the donor compartment, simulating the conditions of the nasal cavity. The results indicated that the diffusion-controlled drug release exhibited a progressive increase throughout the experiment, while a proof-of-concept experiment on ex vivo permeation through rabbit nasal mucosa revealed a better performance of the prepared hybrid systems in comparison to ropinirole solution. The encouraging results in drug release and mucosal permeation indicate that these hybrid systems can serve as attractive platforms for effective and targeted nose-to-brain delivery of ropinirole with a possible application in Parkinson's disease. Further ex vivo and in vivo studies to support the results of the present work are ongoing.

Nanomedicine in therapeutic warfront against estrogen receptor-positive breast cancer

Breast cancer (BC) is the most frequently diagnosed malignancy in women worldwide. Almost 70-80% of cases of BC are curable at the early non-metastatic stage. BC is a heterogeneous disease with different molecular subtypes. Around 70% of breast tumors exhibit estrogen-receptor (ER) expression and endocrine therapy is used for the treatment of these patients. However, there are high chances of recurrence in the endocrine therapy regimen. Though chemotherapy and radiation therapy have substantially improved survival rates and treatment outcomes in BC patients, there is an increased possibility of the development of resistance and dose-limiting toxicities. Conventional treatment approaches often suffer from low bioavailability, adverse effects due to the non-specific action of chemotherapeutics, and low antitumor efficacy. Nanomedicine has emerged as a conspicuous strategy for delivering anticancer therapeutics in BC management. It has revolutionized the area of cancer therapy by increasing the bioavailability of the therapeutics and improving their anticancer efficacy with reduced toxicities on healthy tissues. In this article, we have highlighted various mechanisms and pathways involved in the progression of ER-positive BC. Further, different nanocarriers delivering drugs, genes, and natural therapeutic agents for surmounting BC are the spotlights of this article.

Surfactant and Block Copolymer Nanostructures: From Design and Development to Nanomedicine Preclinical Studies

The medical application of nanotechnology in the field of drug delivery has so far exhibited many efforts in treating simple to extremely complicated and life-threatening human conditions, with multiple products already existing in the market. A plethora of innovative drug delivery carriers, using polymers, surfactants and the combination of the above, have been developed and tested pre-clinically, offering great advantages in terms of targeted drug delivery, low toxicity and immune system activation, cellular biomimicry and enhanced pharmacokinetic properties. Furthermore, such artificial systems can be tailor-made with respect to each therapeutic protocol and disease type falling under the scope of personalized medicine. The simultaneous delivery of multiple therapeutic entities of different nature, such as genes and drugs, can be achieved, while novel technologies can offer systems with multiple modalities often combining therapy with diagnosis. In this review, we present prominent, innovative and state-of-the-art scientific efforts on the applications of surfactant-based, polymer-based, and mixed surfactant-polymer nanoparticle drug formulations intended for use in the medical field and in drug delivery. The materials used, formulation steps, nature, properties, physicochemical characteristics, characterization techniques and pharmacokinetic behavior of those systems, are presented extensively in the length of this work. The material presented is focused on research projects that are currently in the developmental, pre-clinical stage.

QbD-based optimization of raloxifene-loaded cubosomal formulation for transdemal delivery: ex vivo permeability and in vivo pharmacokinetic studies

Raloxifene (RLX) is a drug that is commonly recommended to postmenopausal women at high risk of invasive breast cancer and to prevent osteoporosis. However, limited water solubility (0.000512 mg/ml) and low oral bioavailability (2%) of RLX limit its therapeutic utility. The objective of the present study was to develop an alternative transdermal delivery of RLX to improve its absorption, bypass first pass metabolism, and subsequently improve bioavailability. RLX-loaded cubosomes were prepared using the ethanol injection method followed by microfluidization technique and optimized using the QbD-based 2³ factorial design. The average particle size, entrapment efficiency, and zeta potential of the optimized formulation were found to be 110.6 nm, 98.23%, and 26.2 mV, respectively. In vitro dissolution study indicated that the RLX-loaded cubosomes released 98.26% of the drug compared to pure RLX dispersion (58.6%). Histopathological examination revealed no sign of inflammation, indicating the safety of the developed formulation. Accelerated stability study as per ICH guidelines displayed no significant change in the formulation characteristics and drug-related performance of the developed formulation. Ex vivo permeability studies demonstrated a prolonged release from cubosomal formulation. In vivo pharmacokinetic studies revealed that the relative bioavailability of the optimized transdermal RLX-loaded cubosomes increased by 2.33-fold and 1.22-fold when compared with the oral RLX dispersion and transdermal RLX hydro-ethanolic solution respectively. IVIVC showed level C correlation with linear regression. Thus, the developed RLX-loaded cubosomes may have potential to overcome the problems associated with the existing marketed oral dosage forms of RLX.

Assessing the viability of carbamoylethyl pullulan-g-stearic acid based smart polymeric micelles for tumor targeting of raloxifene

The present investigation entails the synthesis of smart pullulan polymeric micelles for evaluating its tumor targeting potential. For this purpose, two step polymerization synthesis reactions were conducted. In the first step, carbamoylethylation occurs by reaction of the free alcoholic moieties at 6th position of glucopyranose unit of pullulan with acrylamide in presence of alkali to obtain carbamoylethyl pullulan (CmP). In the second step, CmP undergoes graft polymerization with stearic acid (SA) to obtain CmP-g-stearic acid diblock co-polymer (CmP-g-SA) as evident from FTIR and NMR analysis. The XpRD spectra showed crystalline nature that was further confirmed by SEM indicating rough and poly-porous morphology. The QbD based optimized formulations of raloxifene HCl (RLX) loaded polymeric micelles (RLX PMs) exhibited pH-dependent release profile with added advantage of 1.2 times reduction in percentage hemolysis giving substantial compatibility with erythrocytes. In vivo pharmacokinetic performance of RLX PMs suggested enhanced mean residence time and volume of distribution. Besides, the biodistribution study of RLX PMs manifested enhanced entry of RLX in mammary carcinoma tissues as compared to normal tissues suggested that CmP-g-SA based micelles enhanced the anti-tumor activity of RLX. Overall, the findings pointed toward the biocompatibility of CmP-g-SA as a potential carrier system for the delivery of RLX.

Exploring micellar-based polymeric systems for effective nose-to-brain drug delivery as potential neurotherapeutics

Non-invasive nose-to-brain delivery presents a competitive strategy for effective drug targeting. This strategy can potentially evade the blood-brain barrier (BBB) depending on the pathway the drug and/or drug/micelle composite travels, thereby allowing direct drug delivery to the brain. This delivery strategy was employed for lurasidone, a clinically USFDA-approved neurotherapeutic molecule in bipolar disorders and schizophrenia treatments. The aim of this study was to develop mixed polymeric micelles of lurasidone HCl (LH) for targeted brain delivery via intranasal route. Lurasidone HCl-loaded mixed micelles (LHMM) were prepared by solvent evaporation method and optimized by 3² factorial design to quantify the effects of excipients on micelle size and entrapment efficiency. Fourier transform infrared spectroscopy helped in scrutinizing drug-excipient interactions whereas transmission electron microscopy images showed particle size and shape. Further, LHMM and LHMM hydrogel were evaluated for in vitro diffusion, histopathology, ex vivo permeation, in vivo pharmacokinetics and stability studies. Optimized LHMM exhibited 175 nm particle size and 97.8% entrapment efficiency with improved in vitro drug diffusion (81%). LHMM hydrogel showed 79% ex vivo drug permeation without any significant signs of nasociliary toxicity to sheep nasal mucosa. Single dose in vivo pharmacokinetic studies showed improved therapeutic concentration of drug in the brain post intranasal administration with 9.5 ± 0.21 μg/mL C_max and T_1/2 of 19.1 ± 0.08 h as compared to pure drug. LHMM, when administered by intranasal route, demonstrated significant increase in the drug targeting efficiency as well as potential (%DTE and %DTP) of drug as compared to pure lurasidone. Thus, nanosized mixed micelles were useful in effective brain delivery of lurasidone HCl via intranasal route. Graphical abstract.

Fabrication and Evaluation of Celecoxib Oral Oleogel to Reduce the Inflammation of Ulcerative Colitis

Oleogel consists of hydrophobic solvent and an oleogelator. In this study, attempts were made to study the influence of Celecoxib solubility, concentration and dispersability on its release, absorption, and biological performance. Oleogels were prepared to study the formulation variables on its stability and release. Castor oil was selected as the oil and the oleogelator concentration was 4.5% w/w. F3 revealed the highest release and stability compared to other formulae. The percent permeated across the rat intestine showed a 7.5-fold increase over free Celecoxib, and its lifetime was found to be greater than 18 months. The efficacy of free Celecoxib and oleogel formulae to treat rats with ulcerative colitis was done via the induction of ulcerative colitis (UC) through administration of 5% dextran sodium sulphate (DSS). Celecoxib besides its formulae significantly reduced the release of Leucine rich 2 glycoprotein (LRG), Myeloperoxidase (MPO), Tumor necrosis factor-α (TNF-α), proinflammatory cytokine expression, High mobility group box 1 (HMGB1), Nuclear factor kappa B (NF-ΚB), Trefoil Factor 3 (TFF3), Metalloproteinase-3 (MMP3), and miRNA31. Moreover, F3 significantly increased the colonic cAMP in DSS treated rats and reduced the intestinal inflammation beside healing of mucosa and restitution of the epithelium of the gastrointestinal tract.

Lipidic Nano-Sized Emulsomes Potentiates the Cytotoxic and Apoptotic Effects of Raloxifene Hydrochloride in MCF-7 Human Breast Cancer Cells: Factorial Analysis and In Vitro Anti-Tumor Activity Assessment

Raloxifene hydrochloride (RLX), an antiosteoporotic agent, has been utilized for guarding against breast cancer and recently, for the disease management owing to its estrogen antagonist activity. Nevertheless, RLX exhibits poor bioavailability that could be attributed to reduced water solubility and first pass metabolism. To overcome these challenges, this study aimed at formulating and optimizing RLX emulsomes (RLX-EMLs) to enhance the drug antitumor activity. A 4131 factorial design was employed for assessing the effect of lipoid: solid lipid ratio and solid lipid type on the emulsomes characteristics. The anticancer potential of the optimized formulation and apoptotic parameters were assessed. Vesicle size, entrapment, and release efficiency were significantly influenced by both variables, while zeta potential was influenced by lipoid: solid lipid at p < 0.05. The optimal formulation exhibited vesicle size of 236 ± 8.6 nm, zeta potential of -18.6 ± 0.7 mV, drug entrapment of 98.9 ± 4.9%, and release efficiency of 42.7 ± 1.8%. MTT assay showed concentration-dependent inhibition of MCF-7 cells viability. In addition, cells treated with RLX-EMLs showed significant arrest at G2/M phase associated with significant increase in apoptotic and necrotic cells. The enhanced cytotoxic and anti-proliferative effect of RLX-EMLs relative to raw drug was authenticated through increased Bax/Bcl-2 ratio, caspase-9 activation and depletion of mitochondrial membrane potential.

Exploring the feasibility of carbamoylethyl pullulan-g-palmitic acid polymeric micelles for the effective targeting of raloxifene to breast tumor: Optimization and preclinical evaluation

Carbamoylethyl pullulan-grafted palmitic acid (CP-g-PA), a novel self-assembled polymer was synthesized and examined for its efficacy in delivering the raloxifene (RA) to mammary carcinoma. The synthesized CP-g-PA was confirmed by evaluating through various spectral and morphological attributes. Further, the central composite design-response surface methodology with two factors at three levels was utilized to obtain the optimized and stable polymeric micelles. The optimized formulation was subjected to in vitro and in vivo evaluation. RA loaded polymeric micelles (RA-PMs) were spherical in shape with particle size less than 100 nm and high entrapment efficiency (77.02%). The developed formulation exhibited pH-dependent release profile of RA when loaded in polymeric micelles and provides substantial compatibility to erythrocytes. In vivo pharmacokinetic study demonstrates that RA-PMs offers higher mean residence time and volume of distribution as compared to pure RA. Besides, the biodistribution study manifested enhanced drug concentration in tumor and decreased concentration in other tissue as compared to pure drug. The treatment with RA-PMs also increases the median survival time, tumor inhibition rate and % increase in life span of the tumor bearing rats. Overall, the results pointed towards the overwhelming response of RA when loaded into micelles made from CP-g-PA.

Optimized semisolid self-nanoemulsifying system based on glyceryl behenate: A potential nanoplatform for enhancing antitumor activity of raloxifene hydrochloride in MCF-7 human breast cancer cells

Raloxifene hydrochloride (RLX) is a selective estrogen receptor modulator used for treatment and protection against postmenopausal osteoporosis. The drug has been used for protection against breast cancer and more recently, for management of the disease by virtue of its estrogen antagonist action. However, the drug has reduced bioavailability related to low water solubility and first pass metabolism. To surmount these pitfalls, this study aimed at developing and optimizing RLX-loaded semisolid self-nanoemulsifying system (SSNES) with minimized globule size to improve the drug solubility, tumor penetration, and consequently antitumor activity. A simplex lattice mixture design was employed for the formulation and optimization of SSNESs. The mixture components, namely, Compritol® 888 ATO, Tween 20, and polyethylene glycol 200 exhibited significant effect on globule size at P < 0.05. The optimized formulation with globule size of 109.19 ± 2.11 nm showed acceptable thermodynamic stability under stress conditions. Anti-cancer efficacy of the obtained formulation was evaluated in MCF-7 breast cancer cell line. MTT viability assay revealed that RLX-loaded SSNES notably inhibited MCF-7 cell proliferation. Flow cytometry and dual staining with annexin V-FITC/PI were used to assay this anti-proliferative effect and induction of apoptosis, respectively. Cells treated with RLX-loaded SSNES showed significant arrest at G2/M phase associated with significant increase in early/late-stages of apoptotic and necrotic cells. The results exhibited that RLX-loaded SSNES induces apoptosis via the activation of caspase-3 and loss of mitochondrial membrane potential. Accordingly, the proposed SSNES could be regarded as a promising platform for enhancing RLX antitumor activity against breast cancer.

Novel Intranasal Drug Delivery: Geraniol Charged Polymeric Mixed Micelles for Targeting Cerebral Insult as a Result of Ischaemia/Reperfusion

Brain damage caused by cerebral ischaemia/reperfusion (I/R) can lead to handicapping. So, the present study aims to evaluate the prophylactic and therapeutic effects of geraniol in the form of intranasal polymeric mixed micelle (PMM) on the central nervous system in cerebral ischaemia/reperfusion (I/R) injury. A 3² factorial design was used to prepare and optimize geraniol PMM to investigate polymer and stabilizer different concentrations on particle size (PS) and percent entrapment efficiency (%EE). F3 possessing the highest desirability value (0.96), with a PS value of 32.46  ±  0.64 nm, EE of 97.85  ±  1.90%, and release efficiency of 59.66  ±  0.64%, was selected for further pharmacological and histopathological studies. In the prophylactic study, animals were classified into a sham-operated group, a positive control group for which I/R was done without treatment, and treated groups that received vehicle (plain micelles), geraniol oil, and geraniol micelles intranasally before and after I/R. In the therapeutic study, treated rats received geraniol oil and micelles after I/R. Evaluation of the effect of geraniol on behavior was done by activity cage and rotarod and the analgesic effect tested by hot plate. Anti-inflammatory activity was assessed by measuring interleukin β6, cyclooxygenase-2, hydrogen peroxide, and inducible nitric oxide synthase. Histopathogical examination of cerebral cortices was also done to confirm the results of a biochemical assay. Geraniol nanostructured polymeric mixed micelles showed an enhanced neuro-protective effect compared to geraniol oil, confirming that PMM via intranasal route could be an efficient approach for delivering geraniol directly to the brain through crossing the blood-brain barrier.