Effect of Moisture Content of Chitin-Calcium Silicate on Rate of Degradation of Cefotaxime Sodium

Effect of Oxygen and Water on the Stability of Imipenem and Cilastatin Sodium for Injection

The study aimed to investigate the factors affecting the stability of imipenem and cilastatin sodium for injection (IMI/CIL) to improve the quality and stability in IMI/CIL preparation. In this study, the effects of headspace oxygen (HO), water content, particle shape, and particle size on the stability of IMI/CIL were investigated. IMI/CIL was purged with air, premixed oxygen/nitrogen gas (5%/95%), or high-purity nitrogen (99.999%) at 20, 5, or 2% oxygen levels to prepare IMI/CIL with different HO levels. IMI/CIL was stored at 30, 45, and 75% relative humidity for 30 days to prepare IMI/CIL with different water contents. High-performance liquid chromatography method was used for analysis. The results showed that oxygen, water, particle shape, and particle size had significant effects on the stability of IMI/CIL, and free water content is a better predictor of the safety and stability of imipenem and cilastatin sodium than the total water content. The optimization scheme of the above parameters is proposed, which significantly improves the stability of IMI/CIL. This study led to a better understanding of the degradation mechanism of imipenem and cilastatin sodium, and could provide a reference for the selection and control of IMI/CIL process conditions. This study would contribute to the development of IMI/CIL with improved stability.

Synergetic mechanism of defective g-C3N4 activated persulfate on removal of antibiotics and resistant bacteria: ROSs transformation, electron transfer and noncovalent interaction

The environmental hazards of antibiotics and the resulting antibiotic-resistant bacteria (ARB) have attracted more and more attention. In this study, an efficient synergistic system constructed by vacancy g-C₃N₄ (CN_V0.8) and persulfate (PS) showed excellent oxidation performance to degrade aztreonam (AZT) and Escherichia coli (E. coli) screened from wastewater treatment plant (WWTP), as the typical β-lactam antibiotic and ARB. As the recombination of electron and hole was effectively inhibited and the interaction with PS was enhanced after the introduction of defects, CN_V0.8 showed superior PS activation ability compared with bulk-g-C₃N₄ (BCN). The synergistic mechanism was systematically analyzed at three levels step by step. Firstly, the conversion of reactive oxygen radicals (ROSs) was studied using electron spin resonance (ESR) and quenching experiments. Then based on the DFT simulation, the enhancement of adsorption energy between catalysts and PS from -8.924 eV (BCN) to -11.190 eV (CN_V0.8) and the elongation of O-O bond in PS (from 1.496 Å to 1.505 Å) indicated CN_V0.8 had better activation performance for PS compared with BCN. The electron transfer results observed by deformation charge density showed that more electrons could be transferred from the CN_V0.8 layer to the surrounding of PS for its own activation in the synergistic mechanism. Thirdly, the noncovalent interaction of PS/CN_V0.8 belonged to the region of van der Waals force which was defined by the reduced density gradient (RDG) analysis. The intermediate products in the degradation of AZT were first studied in detail using Fukui function calculations and HPLC-QTOF-MS analysis. Subsequently, the environmental practicability of the oxidation system was investigated through wastewater simulation. This research provides a possible strategy for the effective removal of micropollutants and promotes the development of the sulfate radical-advanced oxidation processes (SR-AOPs) in the field of wastewater treatment.

Spread of resistance genes from duck manure to fish intestine in simulated fish-duck pond and the promotion of cefotaxime and As

Integrated culture is a widespread culture mode in South China, in which resistance genes (RGs) also spread in the circulation system with nutrients. Accordingly, the aim of the present study was to investigate the spread of RGs in a fish-duck pond and the RGs and bacterial community of fish intestines. Five fish tanks, including a control tank and four experimental tanks (duck manure, duck manure + cefotaxime, duck manure + As, and duck manure + cefotaxime + As), were tested for 100 days. The results showed that duck manure increased both the diversity and relative abundance of RGs in fish intestines, and the addition of stress factors (cefotaxime, As) increased the relative abundance of RGs by one to two orders of magnitude. The stress-inducing effect of cefotaxime was greater than that of As. Tetracycline resistance genes were more sensitive to stress factors and were the predominant RGs in fish intestines. RGs in duck manure preferentially spread from the water to biofilm and then to fish intestines, whereas co-stress of cefotaxime and As obviously promoted the spread of RGs to fish intestines. In comparison to the control tank, duck manure and stress factors significantly changed the bacterial community of fish intestines. Correlation analysis also revealed that arsB, MOX, tetA and sul1 were significantly correlated with intI1 (P < 0.01), which hinted a potentially dissemination risk of RGs in fish intestines. These findings provide a theoretical basis for further investigating the dissemination of RGs in integrated culture systems and for evaluating the ecological risk of antibiotic and As use in aquaculture.

The Influence of Viscosity and Non-freezing Water Contents Bounded to Different Hydroxypropyl Celluloses (HPC) and Hydroxypropyl Methylcelluloses (HPMC) on Stability of Acetylsalicylic Acid

The aim of the study was to examine the influence of non-freezing water (NFW) contents bound to hydroxypropyl methylcellulose (HPMC) or hydroxypropyl cellulose (HPC) binary mixtures using acetylsalicylic acid (ASA) as a model moisture-sensitive ingredient. Polysaccharides with significantly different physicochemical properties were mixed with acetylsalicylic acid at a ratio 1:1 (w/w). The measurements of NFW contents of hydrated samples were carried out using differential scanning calorimetry (DSC). In the method used, the dry mass normalized dependency of melting enthalpy (ΔH) and respective contents of water was found to be linear. NFW values were calculated after extrapolation ΔH to 0. For stability studies, HPC/ASA and HPMC/ASA mixtures were stored at 40°C and 75% RH for 5 weeks in the climatic chamber. The ASA hydrolysis was investigated using UV-Vis spectrophotometry. The amounts of NFW calculated for raw HPMC 3 cP and 100,000 cP were 0.49 and 0.42 g g-1, while for polymer and ASA mixtures, prepared from HPC type LF (126 cP) and MF (6300 cP) as well as from HPMC 3 cP and 100,000 cP were 0.23, 0.28 g g-1, 0.21 g g-1, and 0.33 g g-1 respectively. The measured NFW values were connected with appropriate concentrations of unhydrolyzed ASA.

Spray-Dried Proliposome Microparticles for High-Performance Aerosol Delivery Using a Monodose Powder Inhaler

Proliposome formulations containing salbutamol sulphate (SS) were developed using spray drying, and the effects of carrier type (lactose monohydrate (LMH) or mannitol) and lipid to carrier ratio were evaluated. The lipid phase comprised soy phosphatidylcholine (SPC) and cholesterol (1:1), and the ratios of lipid to carrier were 1:2, 1:4, 1:6, 1:8 or 1:10 w/w. X-ray powder diffraction (XRPD) revealed an interaction between the components of the proliposome particles, and scanning electron microscopy (SEM) showed that mannitol-based proliposomes were uniformly sized and spherical, whilst LMH-based proliposomes were irregular and relatively large. Using a two-stage impinger (TSI), fine particle fraction (FPF) values of the proliposomes were higher for mannitol-based formulations, reaching 52.6%, which was attributed to the better flow properties when mannitol was used as carrier. Following hydration of proliposomes, transmission electron microscopy (TEM) demonstrated that vesicles generated from mannitol-based formulations were oligolamellar, whilst LMH-based proliposomes generated 'worm-like' structures and vesicle clusters. Vesicle size decreased upon increasing carrier to lipid ratio, and the zeta potential values were negative. Drug entrapment efficiency (EE) was higher for liposomes generated from LMH-based proliposomes, reaching 37.76% when 1:2 lipid to carrier ratio was used. The in vitro drug release profile was similar for both carriers when 1:6 lipid to carrier ratio was used. This study showed that spray drying can produce inhalable proliposome microparticles that can generate liposomes upon contact with an aqueous phase, and the FPF of proliposomes and the EE offered by liposomes were formulation-dependent.