Erlotinib-Valproic Acid Liquisolid Formulation: Evaluating Oral Bioavailability and Cytotoxicity in Erlotinib-Resistant Non-small Cell Lung Cancer Cells

Enhanced oral bioavailability and in vitro evaluation of cannabidiol camel milk-derived exosome formulation in resistant MDA-MB-231 and MDA-MB-468 breast cancer cells

The potential of camel milk-derived exosomes (CMDE) to enhance the bioavailability of Cannabidiol (CBD) was investigated. CBD-CMDE formulation was prepared using an established procedure and its particle size was 138.4 ± 4.37 nm, and CBD entrapment efficiency of 56.56 ± 4.26 %. In-vitro release studies showed release of 78.27 ± 5.37 % and 46.42 ± 4.75 % CBD from CMDE and control CBD formulation respectively in pH 6.8 at 24 hr. The apparent permeability (Papp) of CBD-CMDE was found to be enhanced by 3.95-fold with Papp of 22.9*10-6 ± 0.34 cm/sec as compared to control CBD formulation with Papp of 5.8*10-6 ± 0.65 cm/sec in MDCK cells. CBD-CMDE was found to be more potent than CBD in 2D cytotoxicity assay with IC50 values of 3.6 ± 0.54 µM, 3.88 ± 0.54 µM and 7.53 ± 0.59 µM, 7.53 ± 0.59 µM against Doxorubicin (DOX) resistant MDA-MB-231 and Rapamycin (RM) resistant MDA-MB-468 breast cancer cells respectively. Moreover, 3D spheroids assay results demonstrated CBD-CMDE with IC50 values of 14 ± 0.85 µM, 15 ± 0.07 µM as compared to CBD alone with IC50 values of 25 ± 0.93 µM, 34.7 ± 0.08 µM in MDA-MB-231 DOX RT cells and MDA-MB-468 RM RT cells respectively. In-vivo PK studies showed enhanced bioavailability of CBD from CBD-exosomes with AUC(0-24h) of 1350.56 ± 187.50 h.ng/mL as compared to CBD control formulation with AUC(0-24h) of 351.95 ± 39.10 h.ng/mL with a single oral dose of 12 mg/kg. The data indicate that CMDE significantly improved the oral bioavailability of CBD. Overall, CMDE can be used to enhance the oral absorption of poorly bioavailable APIs.

Applications of Cannabinoids in Neuropathic Pain: An Updated Review

Neuropathic pain is experienced due to injury to the nerves, underlying disease conditions or toxicity induced by chemotherapeutics. Multiple factors can contribute to neuropathic pain such as central nervous system (CNS)-related autoimmune and metabolic disorders, nerve injury, multiple sclerosis and diabetes. Hence, development of pharmacological interventions to reduce the drawbacks of existing chemotherapeutics and counter neuropathic pain is an urgent unmet clinical need. Cannabinoid treatment has been reported to be beneficial for several disease conditions including neuropathic pain. Cannabinoids act by inhibiting the release of neurotransmitters from presynaptic nerve endings, modulating the excitation of postsynaptic neurons, activating descending inhibitory pain pathways, reducing neural inflammation and oxidative stress and also correcting autophagy defects. This review provides insights on the various preclinical and clinical therapeutic applications of cannabidiol (CBD), cannabigerol (CBG), and cannabinol (CBN) in various diseases and the ongoing clinical trials for the treatment of chronic and acute pain with cannabinoids. Pharmacological and genetic experimental strategies have well demonstrated the potential neuroprotective effects of cannabinoids and also elaborated their mechanism of action for the therapy of neuropathic pain.

PEGylated Erlotinib HCl Injectable Nanoformulation for Improved Bioavailability

The present study was undertaken to synthesize PEGylated monomethoxy poly (ethylene glycol)-poly (ε-Caprolactone) (mPEG-PCL) block copolymer and formulate Erlotinib HCl-loaded mPEG-PCL nanoparticles for enhancing the bioavailability of the drug. Using the ring-opening polymerization technique, PEGylated mPEG-PCL block copolymer was synthesized, and the structure of the copolymer was characterized using FTIR, ¹H-NMR, and DSC techniques. The solvent evaporation approach was used to effectively encapsulate Erlotinib HCl within block copolymeric nanoparticles. Erlotinib HCl-loaded mPEG-PCL nanoparticles had a mean particle size of 146.5 ± 2.37 nm and a zeta potential of -27.8 ± 2.77 mV. The nanoparticles had a percent entrapment efficiency of 80.78 ± 0.09%. The in vitro drug release of Erlotinib HCl-loaded copolymeric nanoparticles showed a slow and sustained release behavior which could be maintained for up to 72 h. The Korsmeyer-Peppas fitting findings indicated that the drug release process followed a non-Fickian diffusion mechanism. The pharmacokinetic (PK) behavior of the developed nanoformulation was studied in albino Wistar rats, and the relative bioavailability of the optimized NP formulation given by intravenous route was found to be 187.33%. The PK data suggested that Erlotinib HCl-loaded mPEG-PCL copolymeric nanoparticles can dramatically alter the PK behavior of Erlotinib HCl and greatly improve the drug's bioavailability by as much as three times when compared to the oral formulation. As a result, it was established that the block copolymeric nanoparticles have promise for the effective encapsulation of Erlotinib HCL for an injectable formulation with increased bioavailability.

Application of Machine-Learning Algorithms for Better Understanding the Properties of Liquisolid Systems Prepared with Three Mesoporous Silica Based Carriers

The processing of liquisolid systems (LSS), which are considered a promising approach to improving the oral bioavailability of poorly soluble drugs, has proven challenging due to the relatively high amount of liquid phase incorporated within them. The objective of this study was to apply machine-learning tools to better understand the effects of formulation factors and/or tableting process parameters on the flowability and compaction properties of LSS with silica-based mesoporous excipients as carriers. In addition, the results of the flowability testing and dynamic compaction analysis of liquisolid admixtures were used to build data sets and develop predictive multivariate models. In the regression analysis, six different algorithms were used to model the relationship between tensile strength (TS), the target variable, and eight other input variables. The AdaBoost algorithm provided the best-fit model for predicting TS (coefficient of determination = 0.94), with ejection stress (ES), compaction pressure, and carrier type being the parameters that influenced its performance the most. The same algorithm was best for classification (precision = 0.90), depending on the type of carrier used, with detachment stress, ES, and TS as variables affecting the performance of the model. Furthermore, the formulations with Neusilin® US2 were able to maintain good flowability and satisfactory values of TS despite having a higher liquid load compared to the other two carriers.

Recent Advances in Boosting EGFR Tyrosine Kinase Inhibitors-Based Cancer Therapy

Epidermal growth factor receptor (EGFR) plays a key role in signal transduction pathways associated with cell proliferation, growth, and survival. Its overexpression and aberrant activation in malignancy correlate with poor prognosis and short survival. Targeting inhibition of EGFR by small-molecular tyrosine kinase inhibitors (TKIs) is emerging as an important treatment model besides of chemotherapy, greatly reshaping the landscape of cancer therapy. However, they are still challenged by the off-targeted toxicity, relatively limited cancer types, and drug resistance after long-term therapy. In this review, we summarize the recent progress of oral, pulmonary, and injectable drug delivery systems for enhanced and targeting TKI delivery to tumors and reduced side effects. Importantly, EGFR-TKI-based combination therapies not only greatly broaden the applicable cancer types of EGFR-TKI but also significantly improve the anticancer effect. The mechanisms of TKI resistance are summarized, and current strategies to overcome TKI resistance as well as the application of TKI in reversing chemotherapy resistance are discussed. Finally, we provide a perspective on the future research of EGFR-TKI-based cancer therapy.

The role of Cannabidiol and tetrahydrocannabivarin to overcome doxorubicin resistance in MDA-MB-231 xenografts in athymic nude mice

The significant resistance to currently available chemotherapeutics makes treatment for TNBC a key clinical concern. Herein, we studied the anti-cancer potentials of synthetic cannabidiol (CBD) and Tetrahydrocannabivarin (THCV) when used alone or in combination with doxorubicin (DOX) against MDA-MB-231 resistant cells. Pre-treatment with CBD and THCV significantly increased the cytotoxicity of DOX in MDA-MB-231 2D and 3D cultures that were DOX-resistant. Transcriptomics and Proteomics studies revealed that CBD and THCV, by downregulating PD-L1, TGF-β, sp1, NLRP3, P38-MAPK, and upregulating AMPK induced apoptosis leading to improved DOX's chemosensitivity against DOX resistant MDA-MB-231 tumors in BALB/c nude mice. CBD/THCV in combination with DOX significantly inhibited H3k4 methylation and H2K5 acetylation as demonstrated by western blotting and RT-PCR. Based on these findings, CBD and THCV appear to counteract histone modifications and their subsequent effects on DOX, resulting in chemo-sensitization against MDA-MB-231 resistant cancers.

Artesunate Suppresses the Growth of Lung Cancer Cells by Downregulating the AKT/Survivin Signaling Pathway

NSCLC (non-small-cell lung cancer) is the deadliest cancer in the world. Artesunate is one of the most potent and rapidly acting antimalarial agents. Recently, emerging evidence has suggested the anticancer function of artesunate. In our work, we aimed to investigate the molecular mechanism of artesunate-induced growth inhibition in human lung adenocarcinoma cells and reported that the anticancer effects of artesunate is related to its ability in downregulating AKT/Survivin signaling in A549 cells. The effect of artesunate on the proliferation of A549 cells was determined by CCK-8 assay and colony formation assay; its effect on A549 cell apoptosis was evaluated by lactate dehydrogenase (LDH) release assay. The role of artesunate on the activation of AKT/Survivin signaling was analyzed by western blot and quantitative QPCR. Finally, we used two mouse tumor models to investigate the function of artesunate on the in vivo growth of lung cancer cells. Artesunate treatment caused significant growth inhibition and apoptosis in A549 cells. Mechanistically, artesunate downregulated the activation of AKT/Survivin signaling. In agreement, hyperactivation of AKT signaling restored artesunate-induced growth inhibition in A549 cells. In mouse lung cancer models, artesunate administration significantly reduced the growth of A549 cells and LLC cells in nude mice and immunocompetent mice, respectively. Our findings suggest that artesunate serves as a potential tumor suppressor in lung cancer and hopefully can provide new insight into the development of therapeutic strategies in the clinical lung cancer treatment.

Enthalpy-Entropy Compensation in the Structure-Dependent Effect of Nonsteroidal Anti-inflammatory Drugs on the Aqueous Solubility of Diltiazem

Certain combinations of acidic and basic drugs can cause significant changes in physicochemical properties through the formation of ionic liquids, eutectic mixtures, or deep eutectic solvents. In particular, combining indomethacin and lidocaine is known to result in apparent increases in both the partition coefficients (hydrophobicity) and aqueous solubilities (hydrophilicity). The physicochemical interactions between drugs change the water solubility of the drugs and affect the bio-availability of active pharmaceutical ingredients. Therefore, we need to clarify the mechanism of changes of water solubility of drugs through the physicochemical interactions. In the present study, we identified a thermodynamic factor that regulates the dissolution of a basic drug, in the presence of various acidic nonsteroidal anti-inflammatory drugs. The results demonstrated that enthalpy-entropy compensation plays a key role in the dissolution of drug mixtures and that relevant thermodynamic conditions should be considered.

Concentration and composition dependent aggregation of Pluronic- and Poly-(2-oxazolin)-Efavirenz formulations in biorelevant media

Many drugs and drug candidates are poorly water-soluble. Intestinal fluids play an important role in their solubilization. However, the interactions of intestinal fluids with polymer excipients, drugs and their formulations are not fully understood. Here, diffusion ordered spectroscopy (DOSY) and nuclear Overhauser effect spectroscopy (NOESY), complemented by cryo-TEM were employed to address this. Efavirenz (EFV) as model drug, the triblock copolymers Pluronic® F-127 (PF127) and poly(2-oxazoline) based pMeOx-b-pPrOzi-b-pMeOx (pOx/pOzi) and their respective formulations were studied in simulated fed-state intestinal fluid (FeSSIF). For the individual polymers, the bile interfering nature of PF127 was confirmed and pure pOx/pOzi was newly classified as non-interfering. A different and more complex behaviour was however observed if EFV was involved. PF127/EFV formulations in FeSSIF showed concentration dependent aggregation with separate colloids at low formulation concentrations, a merging of individual particles at the solubility limit of EFV in FeSSIF and joint aggregates above this concentration. In the case of pOx/pOzi/EFV formulations, coincident diffusion coefficients for pOx/pOzi, lipids and EFV indicate joint aggregates across the studied concentration range. This demonstrates that separate evaluation of polymers and drugs in biorelevant media is not sufficient and their mixtures need to be studied to learn about concentration and composition dependent behaviour.

Liquisolid systems: Evaluation of the influence of formulation variables on the optimum liquid load

Liquisolid systems represent an emerging approach in the preparation of solid dosage forms with liquid lipophilic drug or poorly water-soluble drug solution/suspension in suitable liquid vehicle. This study addresses the lack of data regarding the compaction behavior of liquisolid systems, with the aim to investigate the influence of liquid load, carrier to coating ratio, carrier type (microcrystalline cellulose vs. spray dried calcium hydrogen phosphate, anhydrous (Fujicalin®)) on flowability and compaction properties of liquisolid systems and to determine the optimum liquid loads. Liquisolid admixtures with Fujicalin® showed notably better flowability than those with microcrystalline cellulose. An increase in carrier to coating ratio led to enhanced flowability of the admixtures. Compacts with Fujicalin® had good mechanical properties up to 24.7% liquid, while those with microcrystalline cellulose had acceptable mechanical strength up to 16.2% liquid. Liquisolid systems with Fujicalin® showed similar tabletability profiles as those with microcrystalline cellulose, despite having higher liquid content. The ejection stress values indicated that the addition of lubricant might be needed in the case of liquisolid systems with Fujicalin®. Superior properties of Fujicalin® as a carrier for liquisolid tablets were revealed, and dynamic compaction analysis was found to be a valuable tool for the assessment of compaction behavior of liquisolid systems.

Liquisolid systems as a novel approach in formulation and manufacturing of solid dosage forms: Challenges and perspectives

Liquisolid systems are a novel, promising platform for the production of solid dosage forms with a high liquid content, i.e. dispersion of the drug in a suitable, hydrophilic, non-volatile liquid vehicle or liquid drug. This technology requires conventional, but highly porous excipients (carrier and coating material in the appropriate ratio) able to absorb/adsorb liquid medication, resulting in both good flowability and acceptable compression properties. This approach has shown great potential to improve the dissolution rate and bioavailability of poorly soluble drugs, and has been recognized as a good alternative to common, more complex and expensive techniques. A variety of applications of this simple technique have been investigated recently, including the preparation of: modified release tablets, orally disintegrating tablets, solid dosage forms with liquid herbal extracts, etc. This emerging technology has numerous advantages, and the most important are: simplicity, cost-effectiveness, applicability in large scale production and environmental friendliness. However, it is accompanied by certain challenges as well, such as limited applicability in the case of highly dosed drugs. This article aims to give a comprehensive overview of recent progress regarding the potential applications of this technology, as well as to give an insight into the new liquisolid-based techniques intending to further support its commercial applicability.

Synergistic effects of methyl 2-cyano-3,11-dioxo-18beta-olean-1,-12-dien-30-oate and erlotinib on erlotinib-resistant non-small cell lung cancer cells

Non-small cell lung cancer (NSCLC) is often characterized by an underlying mutation in the epidermal growth factor receptor (EGFR), contributing to aggressive metastatic disease. Methyl 2-cyano-3,11-dioxo-18beta-olean-1,12-dien-30-oate (CDODA-Me), a glycyrrhetinic acid derivative, reportedly improves the therapeutic response to erlotinib (ERL), an EGFR tyrosine kinase inhibitor. In the present study, we performed a series of studies to demonstrate the efficacy of CDODA-Me (2 μM) in sensitizing HCC827R (ERL-resistant) cells to ERL. Herein, we first established the selectivity of ERL-induced drug resistance in the HCC827R cells, which was sensitized when ERL was combined with CDODA-Me (2 μM), shifting the IC50 from 23.48 μM to 5.46 μM. Subsequently, whole transcriptomic microarray expression data demonstrated that the combination of ERL + CDODA-Me elicited 210 downregulated genes (0.44% of the whole transcriptome (WT)) and 174 upregulated genes (0.36% of the WT), of which approximately 80% were unique to the ERL + CDODA-Me group. Synergistic effects centered on losses to cell cycle progression transcripts, a reduction of minichromosome maintenance complex components (MCM2-7), all key components of the Cdc45·MCM2-7GINS (CMG) complex, and replicative helicases; these effects were tantamount to the upregulation of processes associated with the nuclear factor erythroid 2 like 2 translational response to oxidative stress, including sulfiredoxin 1, heme oxygenase 1, and stress-induced growth inhibitor 1. Collectively, these findings indicate that the synergistic therapeutic effects of ERL + CDODA-Me on resistant NSCLC cells are mediated via the inhibition of mitosis and induction of oxidative stress.

An Investigation into the Influence of Process Parameters and Formulation Variables on Compaction Properties of Liquisolid Systems

Liquisolid technology, as a promising approach for bioavailability enhancement, has received increasing attention in recent years. However, literature reports addressing the challenges for its industrial application, particularly those related to compaction behavior of liquisolid systems, are scarce. The aim of this study was to investigate the influence of process parameters and formulation variables on the flowability, wetting, and compaction properties of the liquisolid systems prepared in a fluid bed processor. The experiments with microcrystalline cellulose, as a carrier, were performed according to 2³ full factorial design. The effects of liquid content, spray air pressure, and liquid feed rate on the properties of liquisolid systems were investigated. Liquisolid admixtures with microcrystalline cellulose were compared with those prepared with novel carriers, Fujicalin^® and Neusilin^® US2. "Out-die" Heckel, modified Walker, and Kuentz-Leuenberger models were used to analyze the compressibility of liquisolid admixtures. The results obtained showed that an increase in liquid content (in the range of 10 to 15%) led to a decrease in flowability of liquisolid admixtures with microcrystalline cellulose, as well as more pronounced influence of spraying conditions. On the other hand, higher liquid content led to higher compressibility. Fujicalin^® and Neusilin^® US2 liquisolid admixtures were found to have superior flowability and compressibility in comparison with those with microcrystalline cellulose, despite the considerably higher liquid load (50-55% liquid content in Neusilin^® US2 compacts). Acceptable compactibility of the investigated liquisolid systems was observed. The fluid bed processor was shown to be suitable equipment for production of liquisolid systems, but with careful adjustment of process parameters.

Nanoformulation of PROteolysis TArgeting Chimera targeting ‘undruggable’ c-Myc for the treatment of pancreatic cancer

Aim: To explore the anticancer activity of a novel BRD4 protein degrader ARV-825 (ARV) and its nanoformulation development (ARV-NP) for treatment of pancreatic cancer. Materials & methods: ARV-NP were prepared using nanoprecipitation method and characterized for their physicochemical properties and various anticancer cell culture assays. Results: ARV-NP (89.63 ± 16.39 nm) demonstrated good physical stability, negligible hemolysis and improved half-life of ARV. ARV-NP showed significant cytotoxicity, apoptosis and anticlonogenic effect in pancreatic cancer cells. Significant downregulation of target proteins BRD4, c-Myc, Bcl-2 and upregulation of apoptotic marker cleaved caspase-3 was observed. Most importantly, ARV-NP treatment significantly inhibited the cell viability of 3D tumor spheroids of pancreatic cancer. Conclusion: ARV-NP represents a novel therapeutic strategy for pancreatic cancer.

A vaginal nanoformulation of a SphK inhibitor attenuates lipopolysaccharide-induced preterm birth in mice

Aim: Previously, we have shown that inhibition of SphK by the SphK inhibitor-II (SKI II) prevents lipopolysaccharide-induced preterm birth in mice. The aim of this study was to develop a vaginal self-nanoemulsifying drug-delivery system (SNEDDS) for SKI II. Materials & methods: A SKI II-loaded SNEDDS was characterized and tested in a murine preterm birth model. Results: The SNEDDS immediately formed a gel and then slowly emulsified to nanoglobules with over 500-fold enhancement of SKI II solubility at vaginal pH. Intravaginal administration of the SKI II SNEDDS significantly decreased lipopolysaccharide-induced preterm birth in mice. Conclusion: A vaginal nanoformulation of SKI II represents a novel, noninvasive approach to prevent preterm birth.

17-α Hydroxyprogesterone Nanoemulsifying Preconcentrate-Loaded Vaginal Tablet: A Novel Non-Invasive Approach for the Prevention of Preterm Birth

Preterm birth (PTB) is a major cause of infant mortality in the United States and around the globe. Makena^®—once-a-week intramuscular injection of 17-α Hydroxyprogesterone caproate (17P)—is the only FDA approved treatment for the prevention of PTB. Invasive delivery of 17P requires hospitalization and expert personnel for injection. Vaginal delivery of 17P would be preferable, because of high patient compliance, reduced systemic exposure, fewer side effects, and no need for hospitalization. The objective of the present study was to prepare and evaluate a self-nanoemulsifying vaginal tablet of 17P. A solid self-nanoemulsifying preconcentrate (S-SNEDDS) of 17P and dimethylacetamide (DMA) was developed using medium chain triglycerides, a non- immunogenic surfactant, and co-processed excipient (PVA-F100). The tablet prepared was characterized for emulsification time, particle size, solid state properties, and drug release. The formulation showed >50% inhibition of TNF-α release from LPS-stimulated RAW 264.7 cells. Importantly, there were significant differences in rates of PTB and average time to delivery between control and vaginal 17P-treated groups in LPS-stimulated timed pregnant E15.5 mice. Considering the lacuna of therapeutic approaches in this area, vaginal delivery of 17P for the prevention of preterm birth has significant clinical relevance.