Effect of Roughness on the Dispersion of Dry Powders for Inhalation: a Dynamic Visualization Perspective

Dual functional pullulan-based spray-dried microparticles for controlled pulmonary drug delivery

Two main challenges are associated with current spray-dried microparticles for inhalation, including the enhancement of aerosolization performance of microparticles and the creation of sustained drug release for continuous treatment on-site. For achieving these purposes, pullulan was explored as a novel excipient to prepare spray-dried inhalable microparticles (with salbutamol sulphate, SS, as a model drug), which were further modified by additives of leucine (Leu), ammonium bicarbonate (AB), ethanol and acetone. It was demonstrated that all pullulan-based spray-dried microparticles had improved flowability and enhanced aerosolization behavior, with the fine particle (<4.46µm) fraction of 42.0-68.7% w/w, much higher than 11.4% w/w of lactose-SS. Moreover, all modified microparticles showed augmented emitted fractions of 88.0-96.9% w/w, over 86.5% w/w of pullulan-SS. The pullulan-Leu-SS and pullulan-(AB)-SS microparticles demonstrated further increased fine particle (<1.66µm) doses of 54.7µg and 53.3µg respectively, surpassing that (49.6µg) of pullulan-SS, suggesting an additionally increased drug deposition in the deep lungs. Furthermore, pullulan-based microparticles revealed sustained drug release profiles with elongated time (60mins) over the control (2mins). Clearly, pullulan has a great potential to construct dual functional microparticles for inhalation with improved pulmonary delivery efficiency and sustained drug release on-site.

Inhalable Nano-Dimpled Microspheres Containing Budesonide-PLGA for Improved Aerodynamic Performance

Introduction

Dry powder inhalations are an attractive pharmaceutical dosage form. They are environmentally friendly, portable, and physicochemical stable compared to other inhalation forms like pressurized metered-dose inhalers and nebulizers. Sufficient drug deposition of DPIs into the deep lung is required to enhance the therapeutic activity. Nanoscale surface roughness in microparticles could improve aerosolization and aerodynamic performance. This study aimed to prepare microspheres with nanoscale dimples and confirm the effect of roughness on inhalation efficiency.

Methods

The dimpled-surface on microspheres (MSs) was achieved by oil in water (O/W) emulsion-solvent evaporation by controlling the stirring rate. The physicochemical properties of MSs were characterized. Also, in vitro aerodynamic performance of MSs was evaluated by particle image velocimetry and computational fluid dynamics.

Results

The particle image velocimetry results showed that dimpled-surface MSs had better aerosolization, about 20% decreased X-axial velocity, and a variable angle, which could improve the aerodynamic performance. Furthermore, it was confirmed that the dimpled surface of MSs could cause movement away from the bronchial surface, which helps the MSs travel into the deep lung using computational fluid dynamics.

Conclusion

The dimpled-surface MSs showed a higher fine particle fraction value compared to smooth-surface MSs in the Andersen Cascade Impactor, and surface roughness like dimples on microspheres could improve aerosolization and lung deposition.

Dry Powder Inhalers Based on Chitosan-Mannitol Binary Carriers: Effect of the Powder Properties on the Aerosolization Performance

Carriers play an important role in improving the aerosolization performance of dry powder inhalers (DPIs). Despite that intensive attention had been paid to the establishment of the advanced carriers with controllable physicochemical properties in recent years, the design and optimization of carrier-based DPIs remain an empiricism-based process. DPIs are a powder system of complex multiphase, and thus their physicochemical properties cannot fully explain the powder behavior. A comprehensive exposition of powder properties is demanded to build a bridge between the physicochemical properties of carriers and the aerosolization performance of DPIs. In this study, an FT-4 powder rheometer was employed to explore the powder properties, including dynamic flow energy, aeration, and permeability of the chitosan-mannitol binary carriers (CMBCs). CMBCs were self-designed as an advanced carrier with controllable surface roughness to obtain enhanced aerosolization performance. The specific mechanism of CMBCs to enhance the aerosolization performance of DPIs was elaborated based on the theory of pulmonary delivery processes by introducing powder properties. The results exhibited that CMBCs with appropriate surface roughness had lower special energy, lower aeration energy, and higher permeability. It could be predicted that CMBC-based DPIs had greater tendency to fluidize and disperse in airflow, and the lower adhesion force between particles enabled drugs to be detached from the carrier to achieve higher fine particle fractions. The specific mechanism on how physicochemical properties influenced the aerosolization performance during the pulmonary delivery processes could be figured out with the introduction of powder properties.

Mixing of dry powders for inhalation: A review

The process of solids mixing is applied across a considerable range of industries. Pharmaceutical science is one of those industries that utilizes solids mixing extensively. Specifically, solids mixing as a key factor in the preparation of dry powder inhalers using the ordered mixing process will be discussed here. This review opens with a history of dry powder mixing theory, continues to ordered mixing in the preparation for dry powder inhalers, details key interparticulate interactions, explains formulation components for dry powder blends, and finally discusses different types of mixers used in the production of dry powder blends for inhalation. Lastly, the authors offer some suggestions for future work on this topic.