Controlled Release of Lidocaine-Diclofenac Ionic Liquid Drug from Freeze-Thawed Gelatin/Poly(Vinyl Alcohol) Transdermal Patches

Ionic Liquids: New Forms of Active Pharmaceutical Ingredients with Unique, Tunable Properties

This Review aims to summarize advances over the last 15 years in the development of active pharmaceutical ingredient ionic liquids (API-ILs), which make up a prospective game-changing strategy to overcome multiple problems with conventional solid-state drugs, for example, polymorphism. A critical part of the present Review is the collection of API-ILs and deep eutectic solvents (DESs) prepared to date. The Review covers rules for rational design of API-ILs and tools for API-IL formation, syntheses, and characterization. Nomenclature and ionic speciation, and the confusion that these may cause, are highlighted, particularly for speciation in both ILs and DESs of intermediate ionicity. We also highlight in vivo and in vitro pharmaceutical activity studies, with differences in pharmacokinetic/pharmacodynamic depending on ionicity of API-ILs. A brief overview is provided for the ILs used to deliver drugs, and the Review concludes with key prospects and roadblocks in translating API-ILs into pharmaceutical manufacturing.

Enhancing chemical and physical stability of pharmaceuticals using freeze-thaw method: challenges and opportunities for process optimization through quality by design approach

The freeze-thaw (F/T) method is commonly employed during the processing and handling of drug substances to enhance their chemical and physical stability and obtain pharmaceutical applications such as hydrogels, emulsions, and nanosystems (e.g., supramolecular complexes of cyclodextrins and liposomes). Using F/T in manufacturing hydrogels successfully prevents the need for toxic cross-linking agents; moreover, their use promotes a concentrated product and better stability in emulsions. However, the use of F/T in these applications is limited by their characteristics (e.g., porosity, flexibility, swelling capacity, drug loading, and drug release capacity), which depend on the optimization of process conditions and the kind and ratio of polymers, temperature, time, and the number of cycles that involve high physical stress that could change properties associated to quality attributes. Therefore, is necessary the optimization of F/T conditions and variables. The current research regarding F/T is focused on enhancing the formulations, the process, and the use of this method in pharmaceutical, clinical, and biological areas. The present review aims to discuss different studies related to the impact and effects of the F/T process on the physical, mechanical, and chemical properties (porosity, swelling capacity) of diverse pharmaceutical applications with an emphasis on their formulation properties, the method and variables used, as well as challenges and opportunities in developing. Finally, we review the experimental approach for choosing the standard variables studied in the F/T method applying the systematic methodology of quality by design.

Transformation of Hydrophilic Drug into Oil-Miscible Ionic Liquids for Transdermal Drug Delivery

The transdermal delivery of hydrophilic drugs remains challenging owing to their poor ability to permeate the skin; formulation with oil media is difficult without adding chemical permeation enhancers or co-solvents. Herein, we synthesized 12 oil-miscible ionic liquid (IL) drugs comprising lidocaine-, imipramine-, and levamisole (Lev)-hydrochloride with fatty acid permeation enhancers, i.e., laurate, oleate, linoleate, and stearate as counterions. A set of in vitro and in vivo studies was performed to investigate the potency and deliverability of the transdermal drug formulations. All of the synthesized compounds were freely miscible with pharmaceutically acceptable solvents/agents (i.e., ethanol, N-methyl pyrrolidone, Tween 20, and isopropyl myristate (IPM)). In vitro permeation studies revealed that the oleate-based Lev formulation had 2.6-fold higher skin permeation capability than the Lev salts and also superior ability compared with the laurate-, linoleate-, and stearate-containing samples. Upon in vivo transdermal administration to mice, the peak plasma concentration, elimination half-life, and area under the plasma concentration curve values of Lev-IL were 4.6-, 2.9-, and 5.4-fold higher, respectively, than those of the Lev salt. Furthermore, in vitro skin irritation and in vivo histological studies have demonstrated that Lev-IL has excellent biocompatibility compared with a conventional ionic liquid-based carrier. The results indicate that oil-miscible IL-based drugs provide a simple and scalable strategy for the design of effective transdermal drug delivery systems.

Recent Developments in Ionic Liquid-Assisted Topical and Transdermal Drug Delivery

Ionic liquids (ILs) have attracted growing interest as designer solvents/materials for exploring unrealized functions in many areas of research including drug formulations and delivery owing to their inherent tunable physicochemical and biological properties. The use of ILs in the pharmaceutical industry can address challenges related to the use of conventional organic solvent-based chemical permeation enhancers. Their tunability in forming ion pairs with a diverse range of ions enables the task-specific optimization of ILs at the molecular level. In particular, ILs comprising second- and third-generation cations and anions have been extensively used to design biocompatible drug delivery systems to address the challenges related to conventional topical and transdermal drug delivery, including limited permeability, high cytotoxicity, and skin irritation. This review highlights the progress in IL-related research with particular emphasis on the very recent conceptual developments in transdermal drug delivery. Technological advancement and approaches for the formation of IL-based topical and transdermal delivery systems, as well as their promising application in drug delivery, are also discussed.

Active pharmaceutical ingredients (APIs) in ionic liquids: An effective approach for API physiochemical parameter optimization

Ionic liquids (ILs) are widely used as solvents, co-solvents and permeation enhancers in the biomedical and pharmaceutical fields. There are many advantages to using active pharmaceutical ingredients (APIs) in the production of ILs for drug delivery, including the ability to tailor solubility, improve thermal stability, increase dissolution, regulate drug release, improve API permeability, and modulate cytotoxicity on tumor cells. Such an approach has shown significant potential as a tool for drug delivery. As a result, APIs converted into ILs are used as active components in solutions, emulsions, and even nanoparticles (NPs). In this review, we explore the use and physiochemical characteristics of APIs via ILs, including improvements of their physicochemical properties in preformulation and formulation development.

Formulation Development and Pharmaceutical Evaluation of Lysiphyllum strychnifolium Topical Patches for Their Anti-inflammatory Potential

Topical drug delivery systems are interesting and popular dosage forms for formulation development. Thai herbs are used in alternative medicine to treat patients suffering from severe illnesses. They have significant economic and cultural value in Thailand. This work prepared Thai herbal topical patches of Lysiphyllum strychnifolium stem extracts using pectin and Eudragit^® NM 30D, and glycerin as a plasticizer. Astilbin was selected as a chemical marker in L. strychnifolium stem extracts. The L. strychnifolium stem extracts showed a statistically significant decrease in nitrate accumulation. The various properties of Thai herbal topical patches were not significantly different from blank patches. However, the trends of the properties depended on the amount of Eudragit^® NM 30D. All ingredients were homogeneously mixed in Thai herbal topical patches and showed a smooth and compact film. The astilbin content was found in a range of 52.72-63.36 μg/cm². The in vitro release of astilbin depended on the amount of Eudragit^® NM 30D. The kinetics of astilbin release were fitted to the Korsmeyer-Peppas model. The astilbin showed low permeation; thus, polyethylene glycol 400 was used as a permeation enhancer. Polyethylene glycol 400 could increase the permeation rates of astilbin and the cumulative amount of astilbin in pig skin. This would be suitable for preparing the Thai herbal topical patches and could be developed for pharmaceutical and herbal products.

Effect of Stellate Ganglion Block Combined with Lidocaine at Different Concentrations for Preemptive Analgesia on Postoperative Pain Relief and Adverse Reactions of Patients Undergoing Laparoscopic Cholecystectomy

Objective

To explore the effect of stellate ganglion block (SGB) combined with lidocaine at different concentrations for preemptive analgesia on postoperative pain relief and adverse reactions of patients undergoing laparoscopic cholecystectomy (LC).

Methods

Ninety patients undergoing LC in our hospital from June 2019 to June 2020 were selected as the subjects and were randomly divided into group A (30 cases), group B (30 cases), and group C (30 cases), all patients received SGB, and 10 mL of lidocaine at concentrations of 0.25%, 0.5%, and 0.75% was, respectively, administered to patients in groups A, B, and C, so as to compare the analgesic effect, adverse reactions, and clinical indicators among the three groups.

Results

At T₁ and T₂, group C obtained obviously lower NRS scores than groups A and B (P < 0.001); compared with groups A and B, group A had obviously higher onset time (P < 0.001) and significantly lower duration (P < 0.001); no obvious differences in the hemodynamic indexes among the groups were observed (P > 0.05); group C obtained obviously higher BCS score than groups A and B; and the total incidence rate of adverse reactions was obviously higher in group C than in groups A and B (P < 0.05).

Conclusion

Performing SGB combined with 0.5% lidocaine to patients undergoing LC achieves the optimal analgesic effect; such anesthesia plan can effectively stabilize patients' hemodynamics, present higher safety, and promote the regulation of the body internal environment. Further research will be conducive to establishing a better anesthesia plan for such patients.

The Emerging Role of Ionic Liquid-Based Approaches for Enhanced Skin Permeation of Bioactive Molecules: A Snapshot of the Past Couple of Years

Topical and transdermal delivery systems are of undeniable significance and ubiquity in healthcare, to facilitate the delivery of active pharmaceutical ingredients, respectively, onto or across the skin to enter systemic circulation. From ancient ointments and potions to modern micro/nanotechnological devices, a variety of approaches has been explored over the ages to improve the skin permeation of diverse medicines and cosmetics. Amongst the latest investigational dermal permeation enhancers, ionic liquids have been gaining momentum, and recent years have been prolific in this regard. As such, this review offers an outline of current methods for enhancing percutaneous permeation, highlighting selected reports where ionic liquid-based approaches have been investigated for this purpose. Future perspectives on use of ionic liquids for topical delivery of bioactive peptides are also presented.

Ionic liquids as a useful tool for tailoring active pharmaceutical ingredients

Ionic liquids (ILs) have been widely used in biomedical and pharmaceutical fields as solvents or permeation enhancers. Recently, more and more researchers focused on optimizing the physicochemical properties of active pharmaceutical ingredient (API) by ILs technology. Converting APIs into ILs (API-ILs) has shown great potential for drug delivery by eliminating polymorphism, tailoring solubility, improving thermal stability, increasing dissolution, controlling drug release, modulating the surfactant properties, enhancing permeability of APIs and modulating cytotoxicity on tumor cells. In addition, API-ILs are also used in various formulations as active ingredients, such as solutions, emulsions, even tablets or nanoparticles. This paper aims to review current status of API-ILs, including the rational and design, preparation and characterization, the improvement on the physicochemical characteristics of APIs, the compatibility of API-ILs with various formulations, and the future prospects of API-ILs in biomedical and pharmaceutical fields.

Formation of low melting point binary systems comprising ketoprofen and an amide local anaesthetic

Liquid forms of active pharmaceutical ingredients, ionic liquids (ILs) and deep eutectic mixtures (DEMs), offer several potential benefits in respect to advancing pharmaceutical formulations. The aim of this study was to develop and characterise ILs/DEMs composed of two active molecules: ketoprofen (KET), as the acidic component, and a local anaesthetics (LA), lidocaine (LID), mepivacaine (MEP) or bupivacaine (BUP), which constituted the basic component. A mechanosynthetic approach was successfully applied to obtain LA-KET low melting systems. Composition/temperature phase diagrams were determined by differential scanning calorimetry. The amide LA-KET mixtures showed a eutectic behaviour during heating and formed viscous liquids upon quench cooling. Considering the quench cooled LA-KET mixtures, LA crystallisation was observed only in the LA-rich mixtures. LID, MEP and BUP formed disordered complexes with KET at an approximate 1:2 stoichiometry. Infrared spectroscopy studies revealed that the mixtures were composed mainly of hydrogen bonded acid and base molecules, but small amounts of carboxylate anions were detected. The formation of LA-KET complex not only suppressed the high crystallisation tendency of the LA molecules in the dry state, but also eliminated the crystallisation of KET and LA molecules induced by moisture, as revealed by dynamic vapour sorption studies.

Preparation and Physicochemical Characterization of a Diclofenac Sodium-Dual Layer Polyvinyl Alcohol Patch

The aim of this study is to prepare a dual layer polyvinyl (PVA) patch using a combination of electrospinning techniques and cryogelation (freeze-thaw process) then subsequently to investigate the effect of freeze-thaw cycles, nanofiber thickness, and diclofenac sodium (DS) loading on the physicochemical and mechanical properties and formulation of dual layer PVA patches composed of electrospun PVA nanofibers and PVA cryogel. After the successful preparation of the dual layer PVA patch, the prepared patch was subjected to investigation to assess the effect of freeze-thaw cycles, nanofiber thickness and percentages of DS loading on the morphology, physiochemical and mechanical properties. Various spectroscopic techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), water contact angle, and tensile tests were used to evaluate the physicochemical and mechanical properties of prepared dual layer PVA patches. The morphological structures of the dual layer PVA patch demonstrated the effectiveness of both techniques. The effect of freeze-thaw cycles, nanofiber thickness, and DS percentage loading on the crystallinity of a dual layer PVA patch was investigated using XRD analysis. The presence of a distinct DS peak in the FTIR spectrum indicates the compatibility of DS in a dual layer PVA patch through in-situ loading. All prepared patches were considered highly hydrophilic because the data obtained was less than 90°. The increasing saturation of DS within the PVA matrix increases the tensile strength of prepared patches, however decreased its elasticity. Evidently, the increasing of electrospun PVA nanofibers thickness, freeze-thaw cycles, and the DS saturation has improved the physicochemical and mechanical properties of the DS medicated dual layer PVA patches, making them a promising biomaterial for transdermal drug delivery applications.

Marine-Derived Polymers in Ionic Liquids: Architectures Development and Biomedical Applications

Marine resources have considerable potential to develop high-value materials for applications in different fields, namely pharmaceutical, environmental, and biomedical. Despite that, the lack of solubility of marine-derived polymers in water and common organic solvents could restrict their applications. In the last years, ionic liquids (ILs) have emerged as platforms able to overcome those drawbacks, opening many routes to enlarge the use of marine-derived polymers as biomaterials, among other applications. From this perspective, ILs can be used as an efficient extraction media for polysaccharides from marine microalgae and wastes (e.g., crab shells, squid, and skeletons) or as solvents to process them in different shapes, such as films, hydrogels, nano/microparticles, and scaffolds. The resulting architectures can be applied in wound repair, bone regeneration, or gene and drug delivery systems. This review is focused on the recent research on the applications of ILs as processing platforms of biomaterials derived from marine polymers.

Ketoprofen-Based Ionic Liquids: Synthesis and Interactions with Bovine Serum Albumin

The development of ionic liquids based on active pharmaceutical ingredients (API-ILs) is a possible solution to some of the problems of solid and/or hydrophobic drugs such as low solubility and bioavailability, polymorphism and an alternative route of administration could be suggested as compared to the classical drug. Here, we report for the first time the synthesis and detailed characterization of a series of ILs containing a cation amino acid esters and anion ketoprofen (KETO-ILs). The affinity and the binding mode of the KETO-ILs to bovine serum albumin (BSA) were assessed using fluorescence spectroscopy. All compounds bind in a distance not longer than 6.14 nm to the BSA fluorophores. The estimated binding constants (KA) are in order of 10⁵ L mol⁻¹, which is indicative of strong drug or IL-BSA interactions. With respect to the ketoprofen-BSA system, a stronger affinity of the ILs containing l-LeuOEt, l-ValOBu, and l-ValOEt cation towards BSA is clearly seen. Fourier transformed infrared spectroscopy experiments have shown that all studied compounds induced a rearrangement of the protein molecule upon binding, which is consistent with the suggested static mechanism of BSA fluorescence quenching and formation of complexes between BSA and the drugs. All tested compounds were safe for macrophages.