Evaluation of metered dose inhaler (MDI) formulations of ciclosporin

Two-way coupling and Kolmogorov scales on inhaler spray plume evolutions from Ventolin, ProAir, and Qvar

Previous numerical studies of pulmonary drug delivery using metered-dose inhalers (MDIs) often neglected the momentum transfer from droplets to fluid. However, Kolmogorov length scales in MDI flows can be comparable to the droplet sizes in the orifice vicinity, and their interactions can modify the spray behaviors. This study aimed to evaluate the two-way coupling effects on spray plume evolutions compared to one-way coupling. The influences from the mass loading, droplet size, and inhaler type were also examined. Large-eddy simulation and Lagrangian approach were used to simulate the flow and droplet motions. Two-way coupled predictions appeared to provide significantly improved predictions of the aerosol behaviors close to the Ventolin orifice than one-way coupling. Increasing the applied MDI dose mass altered both the fluid and aerosol dynamics, notably bending the spray plume downward when applying a dose ten times larger. The droplet size played a key role in spray dynamics, with the plume being suppressed for 2-µm aerosols and enhanced for 20-µm aerosols. The Kolmogorov length scale ratio dp/η correlated well with the observed difference in spray plumes, with suppressed plumes when dp/η < 0.1 and enhanced plumes when dp/η > 0.1. For the three inhalers considered (Ventolin, ProAir, and Qvar), significant differences were predicted using two-way and one-way coupling despite the level and manifestation of these differences varied. Two-way coupling effects were significant for MDI sprays and should be considered in future numerical studies.

The Potential Use of Cyclosporine Ultrafine Solution Pressurised Metered- Dose Inhaler in the Treatment of COVID-19 Patients

INTRODUCTION

Serious COVID-19 respiratory problems start when the virus reaches the alveolar level, where type II cells get infected and die. Therefore, virus inhibition at the alveolar level would help preventing these respiratory complications.

METHOD

A literature search was conducted to collect physicochemical properties of small molecule compounds that could be used for the COVID-19 treatment. Compounds with low melting points were selected along with those soluble in ethanol, hydrogen-bond donors, and acceptors.

RESULTS

There are severe acute respiratory syndrome coronavirus inhibitors with physicochemical properties suitable for the formulation as an ultrafine pressurised metered-dose inhaler (pMDI). Mycophenolic acid, Debio 025, and cyclosporine A are prime candidates among these compounds. Cyclosporine A (hereafter cyclosporine) is a potent SARS-CoV-2 inhibitor, and it has been used for the treatment of COVID-19 patients, demonstrating an improved survival rate. Also, inhalation therapy of nebulised cyclosporine was tolerated, which was used for patients with lung transplants. Finally, cyclosporine has been formulated as a solution ultrafine pMDI. Although vaccine therapy has started in most countries, inhalation therapies with non-immunological activities could minimise the spread of the disease and be used in vaccine-hesitant individuals.

CONCLUSION

Ultrafine pMDI formulation of cyclosporine or Debio 025 should be investigated for the inhalation therapy of COVID-19.

Solvation in hydrofluoroalkanes: how can ethanol help?

Objectives

The goal of this work was to evaluate the ability of ethanol mixed with hydrofluoroalkanes (HFAs) to improve solvation of moieties of relevance to pressurized metered-dose inhalers (pMDIs).

Methods

Chemical force microscopy was used to measure the adhesion force (Fad) between alkyl-based, ether-based and ester-based moieties (C8/C8, COC/COC and COOC/COOC interactions) in 2H,3H-perfluoropentane (HPFP)/ethanol mixtures. HPFP is a liquid that mimics propellant HFAs. The Fad results are thus a measure of solvation in HFAs. Johnson–Kendall–Roberts (JKR) theory was used to model the results.

Key findings

The Fad normalized by the tip radius of curvature (Fad/R) decreased upon the addition of ethanol, suggesting its ability to enhance the solvent environment. At 15% (v/v) ethanol, the Fad/R was reduced 34% for the alkyl, 63% for the ether, and down 67% for the ester tails. Thus, the solvation could be ranked as: ester &gt; ether &gt; alkyl. JKR theory was a reasonable model for the Fad/R.

Conclusions

Ethanol, within the concentration range of interest in commercial pMDIs, provided limited enhancement in solvation of alkyl moieties. On the other hand, the cosolvent significantly enhanced solvation of ether-based and ester-based moieties, thus suggesting its potential for formulations containing amphiphiles with such groups.

The rejuvenated pressurised metered dose inhaler

The pressurised metered-dose inhaler (pMDI) has now been available for 50 years. Once regarded as an inefficient and difficult-to-use device, the technology has evolved significantly over the last few years, particularly since the introduction of novel formulations containing hydrofluoroalkane (HFA) propellants. Many modern HFA pMDIs deposit drug more efficiently in the lungs, impact less forcefully on the back of the throat and feel less cold than their chlorofluorocarbon pMDI counterparts. An improved understanding of technical factors makes it possible to design HFA pMDIs to have specific spray properties, particularly in terms of fine particle dose and spray velocity. Device technology has also progressed with the introduction of compact and convenient breath-actuated, breath-coordinated and velocity-modifying devices, which help patients to achieve a reliable lung dose. Although it faces competition from dry powder inhalers and possibly from novel soft-mist inhalers containing liquid formulations, the rejuvenated HFA pMDI is a device with a significant future for asthma, chronic obstructive pulmonary disease and wider treatment indications.