Special aspects of diagnostic imaging for radiosurgery of arteriovenous malformations

Planning of gamma knife radiosurgery (GKR) for brain arteriovenous malformations using triple magnetic resonance angiography (triple-MRA)

PURPOSE

Intra-arterial Digital Subtraction Angiography (DSA) is the gold standard technique for radiosurgery target delineation in brain Arterio-Venous Malformations (AVMs). This study aims to evaluate whether a combination of three Magnetic Resonance Angiography sequences (triple-MRA) could be used for delineation of brain AVMs for Gamma Knife Radiosurgery (GKR).

METHODS

Fifteen patients undergoing DSA for GKR targeting of brain AVMs also underwent triple-MRA: 4D Arterial Spin Labelling based angiography (ASL-MRA), Contrast-Enhanced Time-Resolved MRA (CE-MRA) and High Definition post-contrast Time-Of-Flight angiography (HD-TOF). The arterial phase of the AVM nidus was delineated on triple-MRA by an interventional neuroradiologist and a consultant neurosurgeon (triple-MRA volume). Triple-MRA volumes were compared to AVM targets delineated by the clinical team for delivery of GKR using the current planning paradigm, i.e., stereotactic DSA and volumetric MRI (DSA volume). Difference in size, degree of inclusion (DI) and concordance index (CcI) between DSA and triple-MRA volumes are reported.

RESULTS

AVM target volumes delineated on triple-MRA were on average 9.8% smaller than DSA volumes (95%CI:5.6-13.9%; SD:7.14%; p = .003). DI of DSA volume in triple-MRA volume was on average 73.5% (95%CI:71.2-76; range: 65-80%). The mean percentage of triple-MRA volume not included on DSA volume was 18% (95%CI:14.7-21.3; range: 7-30%).

CONCLUSION

The technical feasibility of using triple-MRA for visualisation and delineation of brain AVMs for GKR planning has been demonstrated. Tighter and more precise delineation of AVM target volumes could be achieved by using triple-MRA for radiosurgery targeting. However, further research is required to ascertain the impact this may have in obliteration rates and side effects.

Estimation of dosimetric discrepancy due to use of Onyx™ embolic system in Stereotactic Radiosurgery/Radiotherapy (SRS/SRT) planning

More often the embolic materials in the brain create artefacts in the planning CT images that could lead to a dose variation in planned and delivered dose. The aim of the study was to evaluate the dosimetric effect of artefacts generated by the Onyx™ embolization material during Stereotactic Radiosurgery/Radiotherapy (SRS/SRT) planning. An in-house made novel Polymethyl Methacrylate (PMMA) head phantom (specially designed for SRS/SRT plans) was used for this purpose. For the evaluation process, we have created concentric ring structures around the central Onyx materials on both the CT sets (with and without Onyx material). The verification plans were generated using different algorithms namely Analytical Anisotropic Algorithm (AAA), Acuros XB and Monaco based Monte Carlo on both CT sets. Mean integral dose over the region of interest were calculated in both CT sets. The dosimetric results shows, due to the presence of Onyx material, relative variation in mean integral dose to the proximal structure (Ring 1) were -4.02%, -2.98%, and -2.49% for Monte Carlo, Acuros XB, and AAA respectively. Observed variations are attributed to the presence of artefacts due to Onyx material. Artefacts influence the accuracy of dose calculation during the planning. All the calculation algorithms are not equally capable to account such variations. Special cares are to be taken while choosing the calculation algorithms as it impacts the results of treatment outcome.

Quantitative evaluation of arteriovenous malformation hemodynamic changes after endovascular treatment using parametric color coding: A case series study

Background Brain arteriovenous malformations (AVMs) are complex vascular lesions. Endovascular treatment results are usually measured by calculating the volume reduction of the lesions. Nevertheless, vascular flow quantification seems a more physiologically accurate way of measuring endovascular results. We evaluated the use of parametric color coding (PCC) with digital subtraction angiography (DSA), in order to determine the feasibility of PCC to detect and measure the impact of AVM endovascular treatment-induced changes using real-time hemodynamic parameters. Methods and results Supratentorial brain AVM treatment was evaluated in 29 patients over the course of 38 sessions. Using regions of interest (ROIs) at the carotid siphon, arterial feeder, drainage vein and venous sinus, we found significant increase in time to peak (TTP) values at the arterial feeder, drainage vein and venous sinus. We compared TTP in four different embolization volume groups: I (0-25%), II (26-50%), III (51-75%) and IV (76-100%). We found significant differences between groups and a moderate correlation between embolization percentages, as well as an increase in TTP at the main vein ROI; but not in the arterial side or sinus. Conclusions Brain AVM endovascular treatment results can be quantified in vivo with PCC. PCC is capable of detecting hemodynamic changes after brain AVM endovascular treatment, that may reflect flow drop, and it is correlated with volume embolization.

CBCT-based 3D MRA and angiographic image fusion and MRA image navigation for neuro interventions

Digital subtracted angiography (DSA) remains the gold standard for diagnosis of cerebral vascular diseases and provides intraprocedural guidance. This practice involves extensive usage of x-ray and iodinated contrast medium, which can induce side effects. In this study, we examined the accuracy of 3-dimensional (3D) registration of magnetic resonance angiography (MRA) and DSA imaging for cerebral vessels, and tested the feasibility of using preprocedural MRA for real-time guidance during endovascular procedures.Twenty-three patients with suspected intracranial arterial lesions were enrolled. The contrast medium-enhanced 3D DSA of target vessels were acquired in 19 patients during endovascular procedures, and the images were registered with preprocedural MRA for fusion accuracy evaluation. Low-dose noncontrasted 3D angiography of the skull was performed in the other 4 patients, and registered with the MRA. The MRA was overlaid afterwards with 2D live fluoroscopy to guide endovascular procedures.The 3D registration of the MRA and angiography demonstrated a high accuracy for vessel lesion visualization in all 19 patients examined. Moreover, MRA of the intracranial vessels, registered to the noncontrasted 3D angiography in the 4 patients, provided real-time 3D roadmap to successfully guide the endovascular procedures. Radiation dose to patients and contrast medium usage were shown to be significantly reduced.Three-dimensional MRA and angiography fusion can accurately generate cerebral vasculature images to guide endovascular procedures. The use of the fusion technology could enhance clinical workflow while minimizing contrast medium usage and radiation dose, and hence lowering procedure risks and increasing treatment safety.

3D-Printing of Arteriovenous Malformations for Radiosurgical Treatment: Pushing Anatomy Understanding to Real Boundaries

Radiosurgery of arteriovenous malformations (AVMs) is a challenging procedure. Accuracy of target volume contouring is one major issue to achieve AVM obliteration while avoiding disastrous complications due to suboptimal treatment. We describe a technique to improve the understanding of the complex AVM angioarchitecture by 3D prototyping of individual lesions. Arteriovenous malformations of ten patients were prototyped by 3D printing using 3D rotational angiography (3DRA) as a template. A target volume was obtained using the 3DRA; a second volume was obtained, without awareness of the first volume, using 3DRA and the 3D-printed model. The two volumes were superimposed and the conjoint and disjoint volumes were measured. We also calculated the time needed to perform contouring and assessed the confidence of the surgeons in the definition of the target volumes using a six-point scale. The time required for the contouring of the target lesion was shorter when the surgeons used the 3D-printed model of the AVM (p=0.001). The average volume contoured without the 3D model was 5.6 ± 3 mL whereas it was 5.2 ± 2.9 mL with the 3D-printed model (p=0.003). The 3D prototypes proved to be spatially reliable. Surgeons were absolutely confident or very confident in all cases that the volume contoured using the 3D-printed model was plausible and corresponded to the real boundaries of the lesion. The total cost for each case was 50 euros whereas the cost of the 3D printer was 1600 euros. 3D prototyping of AVMs is a simple, affordable, and spatially reliable procedure that can be beneficial for radiosurgery treatment planning. According to our preliminary data, individual prototyping of the brain circulation provides an intuitive comprehension of the 3D anatomy of the lesion that can be rapidly and reliably translated into the target volume.

Three-dimensional image fusion of CTA and angiography for real-time guidance during neurointerventional procedures

AIM

To evaluate the accuracy of three-dimensional (3D) images from two modalities-CT angiography (CTA) and digital subtraction angiography (DSA). Additionally, to explore the value of using preprocedural CTA for real-time guidance during neurointerventional procedures.

MATERIALS AND METHODS

25 patients with CTA-confirmed cerebral arterial lesions were enrolled. For 12 of these patients, 3D DSA images of the contrast medium-enhanced target vessel were acquired during the intervention and registered with the preprocedurally acquired CTA images for evaluation of the accuracy of image fusion, focusing on the target vessel and the lesion. For the other 13 patients, a low-dose non-contrast 3D angiographic scan was performed. The preprocedurally acquired CTA image was then registered with the coordinate of angiography and overlaid onto the live fluoroscopic image to provide interventional guidance.

RESULTS

Based on visual inspection by two experienced physicians and quantitative evaluation, excellent accuracy in the 3D registration of the CTA and DSA was achieved for all 12 patients examined. Additionally, CTA could be used successfully to guide the interventional procedures, including both diagnostic DSA and stent treatment. The radiation dose and contrast medium use were compared with those used by conventional interventional procedures and both were found to be significantly reduced.

CONCLUSIONS

3D CTA and angiographic image fusion was approved as highly accurate for neurovasculature. Additionally, using the fusion technique to guide interventional procedures enhanced the workflow, and required much less radiation exposure and contrast medium use, thus helping to reduce potential risks and increase treatment safety.

Brain arteriovenous malformations

An arteriovenous malformation is a tangle of dysplastic vessels (nidus) fed by arteries and drained by veins without intervening capillaries, forming a high-flow, low-resistance shunt between the arterial and venous systems. Arteriovenous malformations in the brain have a low estimated prevalence but are an important cause of intracerebral haemorrhage in young adults. For previously unruptured malformations, bleeding rates are approximately 1% per year. Once ruptured, the subsequent risk increases fivefold, depending on associated aneurysms, deep locations, deep drainage and increasing age. Recent findings from novel animal models and genetic studies suggest that arteriovenous malformations, which were long considered congenital, arise from aberrant vasculogenesis, genetic mutations and/or angiogenesis after injury. The phenotypical characteristics of arteriovenous malformations differ among age groups, with fistulous lesions in children and nidal lesions in adults. Diagnosis mainly involves imaging techniques, including CT, MRI and angiography. Management includes observation, microsurgical resection, endovascular embolization and stereotactic radiosurgery, alone or in any combination. There is little consensus on how to manage patients with unruptured malformations; recent studies have shown that patients managed medically fared better than those with intervention at short-term follow-up. By contrast, interventional treatment is preferred following a ruptured malformation to prevent rehaemorrhage. Management continues to evolve as new mechanistic discoveries and reliable animal models raise the possibility of developing drugs that might prevent the formation of arteriovenous malformations, induce obliteration and/or stabilize vessels to reduce rupture risk. For an illustrated summary of this Primer, visit: http://go.nature.com/TMoAdn.

Management of brain arteriovenous malformations

OPINION STATEMENT

Arteriovenous malformations (AVMs) pose a risk of morbidity and mortality throughout an affected patient's lifetime. Over the course of a patient's life, the risk of hemorrhage is approximately 1-4 % per year, and after an initial hemorrhage occurs, this risk may be higher. Other causes of morbidity include seizures, headaches, or progressive neurologic deficits. Once an AVM has been discovered, the utility of attempted obliteration or surgical resection compared to the risk of intervention should be entertained. The characteristics of the malformation as well as the patient's overall health status contribute to the decision to intervene on these lesions. For small lesions located in superficial areas without high-risk surgical characteristics (low-grade Spetzler-Martin grades), it is reasonable to consider surgical resection. In lesions that pose high-risk of complications from surgical removal, intra-arterial embolization, radiosurgery, or a combination of the two may be reasonable treatment options. Some AVMs at traditional high surgical risk may be amenable to partial embolization, allowing initially high-risk lesions to become better candidates for surgical resection. In some patients, particularly those who are older or who have multiple medical comorbidities, the risk of intervention as compared to the annual hemorrhage risk may warrant conservative management as opposed to intervention. The overall treatment strategy must be based on patient and AVM characteristics and careful risk-benefit ratio analysis.

Image Fusion for Radiosurgery, Neurosurgery and Hypofractionated Radiotherapy

Precise target detection is essential for radiosurgery, neurosurgery and hypofractionated radiotherapy because treatment results and complication rates are related to accuracy of the target definition. In skull base tumors and tumors around the optic pathways, exact anatomical evaluation of cranial nerves are important to avoid adverse effects on these structures close to lesions. Three-dimensional analyses of structures obtained with MR heavy T2-images and image fusion with CT thin-sliced sections are desirable to evaluate fine structures during radiosurgery and microsurgery. In vascular lesions, angiography is most important for evaluations of whole structures from feeder to drainer, shunt, blood flow and risk factors of bleeding. However, exact sites and surrounding structures in the brain are not shown on angiography. True image fusions of angiography, MR images and CT on axial planes are ideal for precise target definition. In malignant tumors, especially recurrent head and neck tumors, biologically active areas of recurrent tumors are main targets of radiosurgery. PET scan is useful for quantitative evaluation of recurrences. However, the examination is not always available at the time of radiosurgery. Image fusion of MR diffusion images with CT is always available during radiosurgery and useful for the detection of recurrent lesions. All images are fused and registered on thin sliced CT sections and exactly demarcated targets are planned for treatment. Follow-up images are also able to register on this CT. Exact target changes, including volume, are possible in this fusion system. The purpose of this review is to describe the usefulness of image fusion for 1) skull base, 2) vascular, 3) recurrent target detection, and 4) follow-up analyses in radiosurgery, neurosurgery and hypofractionated radiotherapy.

Use of cone-beam computed tomography angiography in planning for gamma knife radiosurgery for arteriovenous malformations: a case series and early report

BACKGROUND

The effectiveness of Gamma Knife radiosurgery (GKR) for cerebral arteriovenous malformations (AVMs) is predicated on inclusion of the entire nidus while excluding normal tissue. As such, GKR may be limited by the resolution and accuracy of the imaging modality used in targeting.

OBJECTIVE

We present the first case series to demonstrate the feasibility of using ultrahigh-resolution C-arm cone-beam computed tomography angiography (CBCT-A) in AVM targeting.

METHODS

From June 2009 to June 2013, CBCT-A was used for targeting of all patients with AVMs treated with GKR at our institution. Patients underwent Leksell stereotactic head frame placement followed by catheter-based biplane 2-dimensional digital subtraction angiography, 3-dimensional rotational angiography, as well as CBCT-A. The CBCT-A dataset was used for stereotactic planning for GKR. Patients were followed at 1, 3, 6, and 12 months and then annually thereafter.

RESULTS

CBCT-A-based targeting was used in 22 consecutive patients. CBCT-A provided detailed spatial resolution and sensitivity of nidal angioarchitecture enabling treatment. The average radiation dose to the margin of the AVM nidus corresponding to the 50% isodose line was 15.6 Gy. No patient had treatment-associated hemorrhage. At early follow-up (mean, 16 months), 84% of patients had a decreasing or obliterated AVM nidus.

CONCLUSION

CBCT-A-guided radiosurgery is feasible and useful because it provides sufficient detailed resolution and sensitivity for imaging brain AVMs.

Analysis of the targeting uncertainty of a stereotactic frameless radiosurgery technique for arteriovenous malformation

In order to target arteriovenous malformations (AVM) in a frameless approach, registration of two-dimensional (2D) digital-subtracted-angiographs (DSA) with three-dimensional (3D) computed tomography (CT) is required. Targeting accuracy and delineation of a frameless 2D-DSA and 3D-CT image registration tool based on bony anatomy of the skull was evaluated. This frameless approach assures accurate target localization and can be used in a clinical setting.

Advances in Radiosurgery for Arteriovenous Malformations of the Brain

Arteriovenous malformations of the brain are a considerable source of morbidity and mortality for patients who harbor them. Although our understanding of this disease has improved, it remains in evolution. Advances in our ability to treat these malformations and the modes by which we address them have also improved substantially. However, the variety of patient clinical and disease scenarios often leads us into challenging and complex management algorithms as we balance the risks of treatment against the natural history of the disease. The goal of this article is to provide a focused review of the natural history of cerebral arteriovenous malformations, to examine the role of stereotactic radiosurgery, to discuss the role of endovascular therapy as it relates to stereotactic radiosurgery, and to look toward future advances.

Magnetic Resonance Imaging Assessment of Cerebral Arteriovenous Malformation Obliteration After Stereotactic Radiosurgery

BACKGROUND:

Stereotactic radiosurgery is ideal for treating small cerebral arteriovenous malformations (AVMs) that are surgically inaccessible. However, given the inherent delay of AVM obliteration and the potential for radiosurgical failure, detailed evaluation of the neurovascular architecture is necessary to monitor persistence of residual flow. Modern imaging systems such as magnetic resonance imaging (MRI) and angiography allow clinicians to assess transnidus flow after radiosurgical intervention.

OBJECTIVE:

To determine the accuracy of an MRI diagnosis of complete thrombosis and to identify variables that affect the precision of MRI assessment.

METHODS:

One hundred twenty patients were reviewed after receiving radiosurgery at the University of Florida from 1990 to 2010. Each patient had an MRI demonstrating AVM obliteration and an angiogram either confirming or denying AVM thrombosis.

RESULTS:

MRI correctly predicted complete AVM obliteration in 82% of patients. There was a significant correlation between AVM volume and MRI accuracy in 2 separate models. In the first model, logistic regression analysis revealed a significant linear relationship between the natural log of AVM volume and MRI accuracy. The second model showed significant evidence of a cutoff point in MRI accuracy near an AVM volume of 2.80 cm3, above which MRI agreement with angiography is 90% and below which MRI agreement falls off sharply to remain constant at 70%.

CONCLUSION:

MRI is a useful diagnostic system for assessing AVM obliteration, but its accuracy is inherently linked to the nidus volume it is measuring. These results suggest that MRI may be able to take on an increasingly independent role in the evaluation of AVM regression.

Intracranial 4D flow MRI: toward individualized assessment of arteriovenous malformation hemodynamics and treatment-induced changes

BACKGROUND AND PURPOSE

Arteriovenous malformations are an important etiology of hemorrhagic stroke. However, current imaging modalities and risk do not provide insights into individual AVM hemodynamics and its role in pathophysiology. The aims of this study are to determine whether intracranial 4D flow MR imaging can provide insights into arteriovenous malformation hemodynamics independent of the Spetzler-Martin grade and to report the changes in flow observed during staged embolization.

MATERIALS AND METHODS

Intracranial 3D blood flow was assessed in 20 patients with AVM (age = 39 ± 15 years, Spetzler-Martin grade ranging from 1-4) with the use of 4D flow MR imaging (temporal resolution = 45 ms, spatial resolution = [1.2-1.6mm](3)). AVM hemodynamics were visualized by means of time-integrated 3D pathlines depicting the AVM arterial feeding and venous draining patterns over the cardiac cycle. Analysis included the grading of feeding and draining velocities on a 3-point scale (0 = low <25 cm/s, 1 = medium <50 cm/s, 2 = high >50 cm/s). For 4 of 20 patients undergoing 4D flow MR imaging follow-up after staged embolization, peak velocities were quantified in arterial feeders, draining veins, the sagittal sinus, and contralateral arteries.

RESULTS

In 50% of the cases with Spetzler-Martin grade >2, heterogeneous flow (velocity grade differences >1) was found across arteries and veins. Velocities in draining veins increased from Spetzler-Martin grade = 1 (grading = 0.5 ± 0.6) to Spetzler-Martin grade ≥3 (1.1 ± 0.6), whereas arterial velocities were similar (1.7 ± 0.6 versus 1.5 ± 0.6). In the postembolization subgroup of 4 patients, 4D flow MR imaging demonstrated successively more compact AVM and redistribution of velocities. Changes in arterial and venous velocities during treatment were highly different among individuals.

CONCLUSIONS

Spetzler-Martin grade does not reflect differences in 3D AVM arterial and venous hemodynamics, and an individual assessment of AVM hemodynamics may be needed for improved lesion characterization. Four-dimensional flow MR imaging may have the potential to monitor and guide embolization treatment planning.

Usefulness of 3D DSA-MR fusion imaging in the pretreatment evaluation of brain arteriovenous malformations

RATIONALE AND OBJECTIVES

For the evaluation of patients scheduled for the treatment of brain arteriovenous malformations (AVMs), accurate anatomical information is essential. The purpose of this study was to assess the usefulness of three-dimensional (3D) digital subtraction angiography (DSA)-magnetic resonance (MR) fusion imaging for the pretreatment evaluation of AVMs.

MATERIALS AND METHODS

The study population consisted of 11 consecutive patients (7 males, 4 females; age 10-72 years; mean 45 years) with brain AVMs. All prospectively underwent pretreatment MR imaging (MRI), MR angiography (MRA), and two-dimensional (2D) and 3D DSA. The 3D DSA and MR images were semiautomatically fused with fusion software on a workstation. In the delineation of AVM nidus, feeder, drainer, and relationship between AVM and the adjacent brain structures, two radiologists independently evaluated MRA and MRI, three-dimensional (3D) DSA, and MRI, and 3D DSA-MR fusion images using a 4-point scoring system. The referring neurosurgeons were asked whether the information provided by 3D DSA-MR fusion images was helpful for treatment decisions.

RESULTS

For all four items, the delineation was significantly better with the 3D DSA/MRI or 3D DSA-MR fusion images than the MRA/MRI images. Although the delineation for the nidus, feeder, and drainer were not significantly different between the 3D DSA/MRI and 3D DSA-MR fusion images, 3D DSA-MR fusion imaging were significantly better for the relationship between AVM and the adjacent brain structures than 3D DSA/MR imaging (P = .0047). The information provided by 3D DSA-MR fusion images was helpful for treatment decisions in all cases.

CONCLUSION

3D DSA-MR fusion images are useful for the pretreatment evaluation of brain AVMs.

Stereotactic radiosurgery of cranial arteriovenous malformations and dural arteriovenous fistulas

Cranial arteriovenous malformations (AVM) and cranial dural arteriovenous fistulas (AVF) carry a significant risk of morbidity and mortality when they hemorrhage. Current treatment options include surgery, embolization, radiosurgery, or a combination of these treatments. Radiosurgery is thought to reduce the risk hemorrhage in AVMs and AVFs by obliterating of the nidus of abnormal vasculature over the course of 2 to 3 years. Success in treating AVMs is variable depending on the volume of the lesion, the radiation dose, and the pattern of vascular supply and drainage. This article discusses the considerations for selecting radiosurgery as a treatment modality in patients who present with AVMs and AVFs.

Integration of three-dimensional rotational angiography in radiosurgical treatment planning of cerebral arteriovenous malformations

PURPOSE

Accuracy in delineating the target volume is a major issue for successful stereotactic radiosurgery for arteriovenous malformations. The aim of the present study was to describe a method to integrate three-dimensional (3D) rotational angiography (3DRA) into CyberKnife treatment planning and to investigate its potential advantages compared with computed tomography angiography (CTA) and magnetic resonance angiography.

METHODS AND MATERIALS

A total of 20 patients with a diagnosis of cerebral arteriovenous malformation were included in the present study. All patients underwent multislice computed tomography and 3D-volumetric CTA, 3DRA, and 3D magnetic resonance angiography. The contouring of the target and critical volumes was done separately using CTA and thereafter directly using 3DRA. The composite, conjoint, and disjoint volumes were measured.

RESULTS

The use of CTA or 3DRA resulted in significant differences in the target and critical volumes. The target volume averaged 3.49 ± 3.01 mL measured using CTA and 3.26 ± 2.93 mL measured using 3DRA, for a difference of 8% (p < .05). The conjoint and disjoint volume analysis showed an 88% volume overlap. The qualitative evaluation showed that the excess volume obtained using CTA was mostly tissue surrounding the nidus and venous structures. The mean contoured venous volume was 0.67 mL measured using CTA and 0.88 mL (range, 0.1-2.7) measured using 3DRA (p < .05).

CONCLUSIONS

3DRA is a volumetric angiographic study that can be integrated into computer-based treatment planning. Although whether 3DRA provides superior accuracy has not yet been proved, its high spatial resolution is attractive and offers a superior 3D view. This allows a better 3D understanding of the target volume and distribution of the radiation doses within the volume. Additional technical efforts to improve the temporal resolution and the development of software tools aimed at improving the performance of 3D contouring are warranted.

4D radial acquisition contrast-enhanced MR angiography and intracranial arteriovenous malformations: quickly approaching digital subtraction angiography

BACKGROUND AND PURPOSE

The current gold standard for imaging intracranial AVMs involves catheter-based techniques, namely cerebral digital subtraction angiography (DSA). However, DSA presents some procedural risks to the patient. Unfortunately, AVM patients usually undergo multiple DSA exams throughout their diagnostic and therapeutic course, significantly increasing their procedural risk exposure. As such, high-quality noninvasive imaging is desired. We hypothesize that 4D radial acquisition contrast-enhanced MRA approximates the vascular architecture and hemodynamics of AVMs compared to conventional angiography.

METHODS

Thirteen consecutive AVM patients were assessed by 4D radial acquisition contrast-enhanced MRA and DSA. The 4D rCE-MRA images were independently assessed regarding the location, nidal size, Spetzler-Martin grade, and identification of arterial feeders, drainage pattern, and any other vascular anomalies.

RESULTS

4D rCE-MRA correctly depicted the size, venous drainage pattern, and prominent arterial feeders in all cases. Spetzler-Martin grade was correctly determined between reviewers and between the different imaging modalities in all cases except 1. The nidus size was in good correlation between the reviewers, where r=0.99, P<0.000001. There was very good agreement between reviewers regarding the individual scans (kappa=0.63 to 1), whereas the agreement between the DSA and 4D rCE-MRA images was also good (kappa=0.61 to 0.85).

CONCLUSIONS

We have developed a 4D radial acquisition contrast-enhanced MRA sequence capable of imaging intracranial AVMs approximating that of DSA. Image analysis demonstrates equivalency in terms of grading AVMs using the Spetzler-Martin grading scale. This 4D rCE-MRA sequence has the potential to avoid some applications of DSA, thus saving patients from potential procedural risks.

Current concepts in stereotactic radiosurgery - a neurosurgical and radiooncological point of view

Stereotactic radiosurgery is related to the history of "radiotherapy" and "stereotactic neurosurgery". The concepts for neurosurgeons and radiooncologists have been changed during the last decade and have also transformed neurosurgery. The gamma knife and the stereotactically modified linear accelerator (LINAC) are radiosurgical equipments to treat predetermined intracranial targets through the intact skull without damaging the surrounding normal brain tissue. These technical developments allow a more precise intracranial lesion control and offer even more conformal dose plans for irregularly shaped lesions. Histological determination by stereotactic biopsy remains the basis for any otherwise undefined intracranial lesion. As a minimal approach, it allows functional preservation, low risk and high sensitivity. Long-term results have been published for various indications. The impact of radiosurgery is presented for the management of gliomas, metastases, brain stem lesions, benign tumours and vascular malformations and selected functional disorders such as trigeminal neuralgia. In AVM's it can be performed as part of a multimodality strategy including resection or endovascular embolisation. Finally, the technological advances in radiation oncology as well as stereotactic neurosurgery have led to significant improvements in radiosurgical treatment opportunities. Novel indications are currently under investigation. The combination of both, the neurosurgical and the radiooncological expertise, will help to minimize the risk for the patient while achieving a greater treatment success.

Obliteration dynamics in cerebral arteriovenous malformations after cyberknife radiosurgery: quantification with sequential nidus volumetry and 3-tesla 3-dimensional time-of-flight magnetic resonance angiography

OBJECTIVE

To investigate the time-dependent obliteration of cerebral arteriovenous malformations (cAVM) after CyberKnife radiosurgery (CKRS) (Accuray, Inc., Sunnyvale, CA) by means of sequential 3-T, 3-dimensional (3D), time-of-flight (TOF) magnetic resonance angiography (MRA), and volumetry of the arteriovenous malformation (AVM) nidus.

METHODS

In this prospective study, 3D TOF MRA was performed on 20 patients with cAVMs treated by single-fraction CKRS. Three-dimensional TOF MRA was performed on a 3-T, 32-channel magnetic resonance scanner (Magnetom TIM Trio; Siemens Medical Solutions, Erlangen, Germany) with isotropic voxel size at a spatial resolution of 0.6 x 0.6 x 0.6 mm3. The time-dependent relative decay of the transnidal blood flow evidenced by 3D TOF MRA was referred to as "obliteration dynamics." Volumetry of the nidus size was performed with OsiriX imaging software (OsiriX Foundation, Geneva, Switzerland). All patients had 3 to 4 follow-up examinations at 3- to 6-month intervals over a minimum follow-up period of 9 months. Subtotal obliteration was determined if the residual nidus volume was 5% or less of the initial nidus volume. Stata/IC software (Version 10.0; Stata Corp., College Station, TX) was used for statistical analysis and to identify potential factors of AVM obliteration.

RESULTS

Regarding their clinical status, case history, and pretreatments, the participants of this study represent difficult-to-treat cAVM patients. The median nidus volume was 1.8 mL (range, 0.4-12.5 mL); the median minimum dose prescribed to the nidus was 22 Gy (range, 16-24 Gy) delivered to the 67% isodose line (range, 55-80%). CKRS was well tolerated, with complications in 2 patients. No further hemorrhages occurred after RS, except 1 small and clinically inapparent incident. The median follow-up period after RS was 25.0 months (range, 11.7-36.8 months). After RS, a statistically significant obliteration was observed in all patients. However, the obliteration dynamics of the cAVMs showed a pronounced variability, with 2 types of post-therapeutic behavior identified. cAVMs of Group A showed a faster reduction of transnidal blood flow than cAVMs in Group B. The median time to subtotal obliteration was 23.8 months for all patients, 11.6 months for patients in Group A, and 27.8 months for patients in Group B (P = 0.05). Logistic regression analysis revealed dose homogeneity and the circumscribed isodose to be the only variables (P < 0.01) associated with the obliteration dynamics in this study. The cumulative complete angiographic obliteration rate was 67% (95% confidence interval, 32-95%) 2 years after RS.

CONCLUSION

The use of sequential 3D TOF MRA at 3 T and nidus volumetry enables a noninvasive quantitative assessment of the dynamic obliteration process induced by CKRS in cAVMs. This method may be helpful to identify factors related to AVM obliteration after RS when larger patient cohorts become available.