Are melanized feather barbs stronger?

The damping properties of the foam-filled shaft of primary feathers of the pigeon Columba livia

The avian feather combines mechanical properties of robustness and flexibility while maintaining a low weight. Under periodic and random dynamic loading, the feathers sustain bending forces and vibrations during flight. Excessive vibrations can increase noise, energy consumption, and negatively impact flight stability. However, damping can alter the system response, and result in increased stability and reduced noise. Although the structure of feathers has already been studied, little is known about their damping properties. In particular, the link between the structure of shafts and their damping is unknown. This study aims at understanding the structure-damping relationship of the shafts. For this purpose, laser Doppler vibrometry (LDV) was used to measure the damping properties of the feather shaft in three segments selected from the base, middle, and tip. A combination of scanning electron microscopy (SEM) and micro-computed tomography (µCT) was used to investigate the gradient microstructure of the shaft. The results showed the presence of two fundamental vibration modes, when mechanically excited in the horizontal and vertical directions. It was also found that the base and middle parts of the shaft have higher damping ratios than the tip, which could be attributed to their larger foam cells, higher foam/cortex ratio, and higher percentage of foam. This study provides the first indication of graded damping properties in feathers.

Selective biodegradation of recalcitrant black chicken feathers by a newly isolated thermotolerant bacterium Pseudochrobactrum sp. IY-BUK1 for enhanced production of keratinase and protein-rich hydrolysates

Black chicken feathers generated in large amount from poultry and slaughter houses are highly recalcitrant to microbial degradation due to their tough structural nature. A novel keratinolytic bacterium that possessed high affinity for black feather was isolated from chicken manure and identified as Pseudochrobactrum sp. IY-BUK1. Keratinase and feather soluble protein were effectively produced by the free living cells of the bacterium in media containing only black feathers and a mixture of equal amount of black-, brown- and white-coloured feathers. Complete degradation of 5 g/L of black feathers was completed in 3 days following optimisation of physico-chemical conditions. However, the bacterium selectively completed the degradation of black feather in a medium containing mixture of feathers in 144 h leaving behind approximately 33% and 45% of brown and white feathers in the medium respectively. Gellan gum-immobilised cells of strain IY-BUK1 enhanced the keratinase production by about 150% and were used repeatedly for ten cycles to degrade 5 g/L of black feather in a semi continuous fermentation of 18 h per cycle with enhanced and stable production of soluble protein. The study demonstrated the potential use of Pseudochrobactrum sp. IY-BUK1 not only in biodegradation of highly recalcitrant black feathers, but also in producing keratinase enzymes and valuable soluble proteins for possible industrial usage.

Microstructural tissue-engineering in the rachis and barbs of bird feathers

Feathers do not have to be especially strong but they do need to be stiff and at the same time resilient and to have a high work of fracture. Syncitial barbule fibres are the highest size-class of continuous filaments in the cortex of the rachis of the feather. However, the rachis can be treated as a generalized cone of rapidly diminishing volume. This means that hundreds of syncitial barbule fibres of the rachis may have to be terminated before reaching the tip – creating potentially thousands of inherently fatal crack-like defects. Here I report a new microstructural architecture of the feather cortex in which most syncitial barbule fibres deviate to the right and left edges of the feather rachis from far within its borders and extend into the barbs, side branches of the rachis, as continuous filaments. This novel morphology adds significantly to knowledge of β-keratin self-assembly in the feather and helps solve the potential problem of fatal crack-like defects in the rachidial cortex. Furthermore, this new complexity, consistent with biology’s robust multi-functionality, solves two biomechanical problems at a stroke. Feather barbs deeply ‘rooted’ within the rachis are also able to better withstand the aerodynamic forces to which they are subjected.

Light Like a Feather: A Fibrous Natural Composite with a Shape Changing from Round to Square

Only seldom are square/rectangular shapes found in nature. One notable exception is the bird feather rachis, which raises the question: why is the proximal base round but the distal end square? Herein, it is uncovered that, given the same area, square cross sections show higher bending rigidity and are superior in maintaining the original shape, whereas circular sections ovalize upon flexing. This circular-to-square shape change increases the ability of the flight feathers to resist flexure while minimizes the weight along the shaft length. The walls are themselves a heterogeneous composite with the fiber arrangements adjusted to the local stress requirements: the dorsal and ventral regions are composed of longitudinal and circumferential fibers, while lateral walls consist of crossed fibers. This natural avian design is ready to be reproduced, and it is anticipated that the knowledge gained from this work will inspire new materials and structures for, e.g., manned/unmanned aerial vehicles.

A lightweight, biological structure with tailored stiffness: The feather vane

The flying feathers of birds are keratinous appendages designed for maximum performance with a minimum weight penalty. Thus, their design contains ingenious combinations of components that optimize lift, stiffness, aerodynamics, and damage resistance. This design involves two main parts: a central shaft that prescribes stiffness and lateral vanes which allows for the capture of air. Within the feather vane, barbs branch from the shaft and barbules branch from barbs, forming a flat surface which ensures lift. Microhooks at the end of barbules hold barbs tightly together, providing the close-knit, unified structure of the feather vane and enabling a repair of the structure through the reattachment of un-hooked junctions. Both the shaft and barbs are lightweight biological structures constructed of keratin using the common motif of a solid shell and cellular interior. The cellular core increases the resistance to buckling with little added weight. Here we analyze the detailed structure of the feather barb and, for the first time, explain its flexural stiffness in terms of the mechanics of asymmetric foam-filled beams subjected to bending. The results are correlated and validated with finite element modeling. We compare the flexure of single barbs as well as arrays of barbs and find that the interlocking adherence of barbs to one another enables a more robust structure due to minimized barb rotation during deflection. Thus, the flexure behavior of the feather vane can be tailored by the adhesive hooking between barbs, creating a system that mitigates damage. A simplified three-dimensional physical model for this interlocking mechanism is constructed by additive manufacturing. The exceptional architecture of the feather vane will motivate the design of bioinspired structures with tailored and unique properties ranging from adhesives to aerospace materials.

STATEMENT OF SIGNIFICANCE

Despite its importance to bird flight, literature characterizing the feather vane is extremely limited. The feather vane is composed of barbs that branch from the main shaft (rachis) and barbules that branch from barbs. In this study, the flexural behavior of the feather barb and the role of barbule connections in reinforcing the feather vane are quantitatively investigated for the first time, both experimentally and theoretically. Through the performed experiments, structure-function relationships within the feather vane are uncovered. Additionally, in the proposed model the sophisticated structure of the barbs and the interlocking mechanism of the feather vane are simplified to understand these processes in order to engineer new lightweight structures and adhesives.

FORCED MOLT IN FOUR JUVENILE YELLOW-EYED PENGUINS (MEGADYPTES ANTIPODES)

Penguins are dependent on waterproof plumage for survival. The molt in sub-Antarctic penguin species is a seasonal and catastrophic process during which the animals go through periods of fasting and high levels of stress. Their entire plumage is usually replaced in 3 wk. Attempts at consistent hormonal induction of molt in penguins have been unsuccessful. Four Yellow-eyed Penguins ( Megadyptes antipodes ) were referred for treatment at Wildbase, Massey University, Palmerston North, New Zealand, in late April 2014, following loss of waterproofing, feather breakage, increased body weight, pododermatitis, and damage to caudal feathers from hock sitting. Feather plucking of damaged areas to stimulate feather regrowth was attempted with poor results. Waiting 10-12 mo for a natural molt was not tenable. Catastrophic molt was induced by treatment with 10 g/kg of fresh beef thyroid gland orally once a day. The molt was complete in 18-26 d during which the animals regained full plumage and waterproofing after feather regrowth. The forced molt feathers had abnormal pigmentation but were of sufficient quality to allow release of the birds back to the wild.

Spiders do have melanin after all

Melanin pigments are broadly distributed in nature - from bacteria to fungi to plants and animals. However, many previous attempts to identify melanins in spiders were unsuccessful, suggesting that these otherwise ubiquitous pigments were lost during spider evolution. Yet, spiders exhibit many dark colours similar to those produced by melanins in other organisms, and the low solubility of melanins makes isolation and characterization difficult. Therefore, whether melanins are truly absent or have simply not yet been detected is an open question. Raman spectroscopy provides a reliable way to detect melanins in situ, without the need for isolation. In this study, we document the presence of eumelanin in diverse species of spiders using confocal Raman microspectroscopy. Comparisons of spectra with theoretically calculated data falsify the previous hypothesis that dark colours are produced solely by ommochromes in spiders. Our data indicate that melanins are present in spiders and further supporting that they are present in most living organisms.

A new helical crossed-fibre structure of β-keratin in flight feathers and its biomechanical implications

The feather aerofoil is unequalled in nature. It is comprised of a central rachis, serial paired branches or barbs, from which arise further branches, the barbules. Barbs and barbules arise from the significantly thinner lateral walls (the epicortex) of the rachis and barbs respectively, as opposed to the thicker dorsal and ventral walls (the cortex). We hypothesized a microstructural design of the epicortex that would resist the vertical or shearing stresses. The microstructures of the cortex and epicortex of the rachis and barbs were investigated in several bird species by microbe-assisted selective disassembly and conventional methods via scanning electron microscopy. We report, preeminent of the finds, a novel system of crossed fibres (ranging from ∼100-800 nm in diameter), oppositely oriented in alternate layers of the epicortex in the rachis and barbs. It represents the first cross-fibre microstructure, not only for the feather but in keratin per se. The cortex of the barbs is comprised of syncitial barbule cells, definitive structural units shown in the rachidial cortex in a related study. The structural connection between the cortex of the rachis and barbs appears uninterrupted. A new model on feather microstructure incorporating the findings here and in the related study is presented. The helical fibre system found in the integument of a diverse range of invertebrates and vertebrates has been implicated in profound functional strategies, perhaps none more so potentially than in the aerofoil microstructure of the feather here, which is central to one of the marvels of nature, bird flight.

Malaria infection and feather growth rate predict reproductive success in house martins

Carry-over effects take place when events occurring in one season influence individual performance in a subsequent season. Blood parasites (e.g. Plasmodium and Haemoproteus) have strong negative effects on the body condition of their hosts and could slow the rate of feather growth on the wintering grounds. In turn, these winter moult costs could reduce reproductive success in the following breeding season. In house martins Delichon urbica captured and studied at a breeding site in Europe, we used ptilochronology to measure growth rate of tail feathers moulted on the winter range in Africa, and assessed infection status of blood parasites transmitted on the wintering grounds. We found a negative association between haemosporidian parasite infection status and inferred growth rate of tail feathers. A low feather growth rate and blood parasite infections were related to a delay in laying date in their European breeding quarters. In addition, clutch size and the number of fledglings were negatively related to a delayed laying date and blood parasite infection. These results stress the importance of blood parasites and feather growth rate as potentially mechanisms driving carry-over effects to explain fitness differences in wild populations of migratory birds.

The peacock's train (Pavo cristatus and Pavo cristatus mut. alba) I. structure, mechanics, and chemistry of the tail feather coverts

The feathers in the train of the peacock serve not for flying but for sexual display. They are long, slender beams loaded in bending by their own weight. An outer circular conical shell, the cortex, is filled by a closed foam of 7.6% relative density, the medulla, both of feather keratin. Outer diameter and thickness of the cortex decrease linearly from the body toward the tip. This self-similar geometry leads to a division of labor. The cortex (longitudinal Young's modulus 3.3 GPa, transverse modulus 1 GPa) provides 96% of the longitudinal strength and bending rigidity of the feather. The medulla (Young's modulus 10 MPa) provides 96% of the transverse compressive rigidity. Fracture stress of the cortex, both longitudinal and transverse, is 120 MPa.

Iridescence: a functional perspective

In animals, iridescence is generated by the interaction of light with biological tissues that are nanostructured to produce thin films or diffraction gratings. Uniquely among animal visual signals, the study of iridescent coloration contributes to biological and physical sciences by enhancing our understanding of the evolution of communication strategies, and by providing insights into physical optics and inspiring biomimetic technologies useful to humans. Iridescent colours are found in a broad diversity of animal taxa ranging from diminutive marine copepods to terrestrial insects and birds. Iridescent coloration has received a surge of research interest of late, and studies have focused on both characterizing the nanostructures responsible for producing iridescence and identifying the behavioural functions of iridescent colours. In this paper, we begin with a brief description of colour production mechanisms in animals and provide a general overview of the taxonomic distribution of iridescent colours. We then highlight unique properties of iridescent signals and review the proposed functions of iridescent coloration, focusing, in particular, on the ways in which iridescent colours allow animals to communicate with conspecifics and avoid predators. We conclude with a brief overview of non-communicative functions of iridescence in animals. Despite the vast amount of recent work on animal iridescence, our review reveals that many proposed functions of iridescent coloration remain virtually unexplored, and this area is clearly ripe for future research.

Structure and mechanical properties of selected biological materials

Mineralized biological tissues offer insight into how nature has evolved these components to optimize multifunctional purposes. These mineral constituents are weak by themselves, but interact with the organic matrix to produce materials with unexpected mechanical properties. The hierarchical structure of these materials is at the crux of this enhancement. Microstructural features such as organized, layered organic/inorganic structures and the presence of porous and fibrous elements are common in many biological components. The organic and inorganic portions interact at the molecular and micro-levels synergistically to enhance the mechanical function. In this paper, we report on recent progress on studies of the abalone and Araguaia river clam shells, arthropod exoskeletons, antlers, tusks, teeth and bird beaks.

Optimal moult strategies in migratory birds

Avian migration, which involves billions of birds flying vast distances, is known to influence all aspects of avian life. Here we investigate how birds fit moult into an annual cycle determined by the need to migrate. Large variation exists in moulting patterns in relation to migration: for instance, moult can occur after breeding in the summer or after arrival in the wintering quarters. Here we use an optimal annual routine model to investigate why this variation exists. The modelled bird's decisions depend on the time of year, its energy reserves, breeding status, experience, flight feather quality and location. Our results suggest that the temporal and spatial variations in food are an important influence on a migratory bird's annual cycle. Summer moult occurs when food has a high peak on the breeding site in the summer, but it is less seasonal elsewhere. Winter moult occurs if there is a short period of high food availability in summer and a strong winter peak at different locations (i.e. the food is very seasonal but in opposite phase on these areas). This finding might explain why only long-distance migrants have a winter moult.

Structure of white rhinoceros (Ceratotherium simum) horn investigated by X-ray computed tomography and histology with implications for growth and external form

The nasal and frontal horns of two individuals of Ceratotherium simum were examined by x-ray computed tomography (CT scanning), gross observation of sectioned horn, and light microscopy of histological sections of the horn tissue. CT scans of both sets of horns reveal a periodic banding pattern that is evident upon gross observation of sections as darker bands of tissue. The overlap of these bands in both histological and CT slices suggests the presence of both a photoabsorbent component (melanin) and a radiodense component (calcium phosphate salts, most likely hydroxyapatite or octocalcium phosphate). The distribution of these two components in the horns is hypothesized to contribute to the differential wear patterns that produce the characteristic sweeping conical shape of rhinoceros horn from what otherwise (in the absence of wear and UV exposure) would be cylindrical blocks of constantly growing cornified papillary epidermis. Although extant rhinocerotids are unique in possessing a massive entirely keratinous horn that approximates the functions of keratin-and-bone horns such as those of bovid artiodactyls, the tissue structures that make up the horn are strikingly convergent with other examples of papillary cornified epidermis found in horses, artiodactyls, cetaceans, and birds.

Melanin and Glycera jaws: emerging dark side of a robust biocomposite structure

Defining the design principles guiding the fabrication of superior biocomposite structures from an assemblage of ordinary molecules is a key goal of biomimetics. Considering their low degree of mineralization, Glycera jaws have been shown to be extraordinarily resistant to abrasion based on the metric hardness3/Young's modulus2. The jaws also exhibit an impressive chemical inertness withstanding boiling concentrated hydrochloric acid as well as boiling concentrated sodium hydroxide. A major organic component largely responsible for the chemical inertness of the jaws has been characterized using a spectrophotometric assay for melanin content, 13C solid state nuclear magnetic resonance, IR spectroscopy, and laser desorption ionization-time of flight mass spectrometry and is identified here as a melanin-like network. Although melanin is widely distributed as a pigment in tissues and other structural biomaterials, to our knowledge, Glycera jaws represent the first known integument to exploit melanin as a cohesive load- and shape-bearing material.