Experimental investigation of nasal airflow

Method for Fabricating Transparent Patient-Specific Vocal Tract Replicas

INTRODUCTION

Transparent, patient-specific vocal tract replicas are helpful in research and educational endeavors but challenging to procure. An accessible method for fabricating these models, improving on previously suggested processes, would make them more widely available.

METHOD

Detailed instructions for fabricating a transparent, patient-specific vocal tract model were addressed. The broad steps were (1) digitally reconstructing (patient-specific) vocal tract geometry, (2) producing a vocal tract mold (using methods such as three-dimensional [3D] printing), and (3) casting transparent material (such as silicone) around the vocal tract mold and removing the mold. The cavities remaining within the cast represented the exact geometry of the vocal tract.

DISCUSSION

A combination of 3D printing and silicone casting can produce useful vocal tract replicas. Several simple changes to previous methods can improve consistency and reduce the labor and cost of production. Limitations and potential modifications to expand the applications of this method are discussed.

Computational Fluid Dynamics Modeling of Nasal Obstruction and Associations with Patient-Reported Outcomes

BACKGROUND

Nasal obstruction is a common problem, with significant impact on quality of life. Accurate diagnosis may be challenging because of the complex and dynamic nature of the involved anatomy. Computational fluid dynamics modeling has the ability to identify specific anatomical defects, allowing for a targeted surgical approach. The goal of the current study is to better understand nasal obstruction as it pertains to disease-specific quality of life by way of a novel computational fluid dynamics model of nasal airflow.

METHODS

Fifty-three patients with nasal obstruction underwent computational fluid dynamics modeling based on computed tomographic imaging. Nasal resistance was compared to demographic data and baseline subjective nasal patency based on Nasal Obstructive Symptom Evaluation scores.

RESULTS

Mean Nasal Obstructive Symptom Evaluation score among all patients was 72.6. Nasal Obstructive Symptom Evaluation score demonstrated a significant association with nasal resistance in patients with static obstruction (p = 0.03). There was a positive correlation between Nasal Obstructive Symptom Evaluation score and nasal resistance in patients with static bilateral nasal obstruction (R2 = 0.32) and poor correlation in patients with dynamic bilateral obstruction caused by nasal valve collapse (R2 = 0.02). Patients with moderate and severe bilateral symptoms had significantly higher nasal resistance compared to those with unilateral symptoms (p = 0.048).

CONCLUSIONS

Nasal obstruction is a multifactorial condition in most patients. This study shows correlation between simulated nasal resistance and Nasal Obstructive Symptom Evaluation score in a select group of patients. There is currently no standardized diagnostic algorithm or gold standard objective measure of nasal airflow; however, computational fluid dynamics may better inform treatment planning and surgical techniques on an individual basis.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Risk, V.

Numerical simulation of unsteady airflow in a nasal cavity for various sizes of maxillary sinus opening in a virtual endoscopic surgery

Functional endoscopic sinus surgery (FESS) is performed to treat sinusitis when treatment with medication fails. In the present study, three different virtual maxillary sinus endoscopic surgeries were performed on a realistic 3-D computational model of the nasal cavity of an adult male under the supervision of a specialist. They included only uncinectomy, uncinectomy + 8mm Middle Meatal Antrostomy (MMA) and uncinectomy + 18 mm MMA. Simulations were performed for two human activity respiratory rates, including rest and moderate activities, and effects of different surgeries and respiratory rates on maxillary sinus were investigated. It was found that after endoscopic sinus surgery, the volume of air entering the maxillary sinus increased significantly, and as the size of the MMA increased, or the breathing condition changed from rest to moderate activity, this volume of air increased. For the rest condition, on average for both nasal passages, for uncinectomy +8 mm MMA, around 15 % of the inhaled flow and 7 % of the exhaled flow enter the maxillary sinuses. For uncinectomy +18 mm MMA, these values are 24 % and 14 %, respectively. As human activity increases, a lower portion of inhaled and exhaled air enters the maxillary sinuses. For the moderate activity condition, on average for both nasal passages, for uncinectomy +8 mm MMA, around 11 % of the inhaled flow and 6 % of the exhaled flow rate enters the maxillary sinus. For uncinectomy +18 mm MMA, these values are 16 % and 8%, respectively. Comparing the steady and unsteady simulation results showed that the quasi-steady flow assumption could predict the flow in the maxillary sinus and the volume of air entering the sinuses, almost at any moment of respiration, with acceptable accuracy.

The Virtual Nose: Assessment of Static Nasal Airway Obstruction Using Computational Simulations and 3D-Printed Models

Background: The use of virtual noses to predict the outcome of surgery is of increasing interests, particularly, as detailed and objective pre- and postoperative assessments of nasal airway obstruction (NAO) are difficult to perform. The objective of this article is to validate predictions using virtual noses against their experimentally measured counterpart in rigid 3D-printed models. Methods: Virtual nose models, with and without NAO, were reconstructed from patients' cone beam computed tomography scans, and used to evaluate airflow characteristics through computational fluid dynamics simulations. Prototypes of the reconstructed models were 3D printed and instrumented experimentally for pressure measurements. Results: Correlation between the numerical predictions and experimental measurements was shown. Analysis of the flow field indicated that the NAO in the nasal valve increases significantly the wall pressure, shear stress, and incremental nasal resistance behind the obstruction. Conclusions: Airflow predictions in static virtual noses correlate well with detailed experimental measurements on 3D-printed replicas of patient airways.

An Overview of Computational Fluid Dynamics Preoperative Analysis of the Nasal Airway

Evaluation of the nasal airway is crucial for every patient with symptoms of nasal obstruction as well as for every patient with other nasal symptoms. This assessment of the nasal airway comprises clinical examination together with imaging studies, with the correlation between findings of this evaluation and symptoms reported by the patient being based on the experience of the surgeon. Measuring nasal airway resistance or nasal airflow can provide additional data regarding the nasal airway, but the benefit of these objective measurements is limited due to their lack of correlation with patient-reported evaluation of nasal breathing. Computational fluid dynamics (CFD) has emerged as a valuable tool to assess the nasal airway, as it provides objective measurements that correlate with patient-reported evaluation of nasal breathing. CFD is able to evaluate nasal airflow and measure variables such as heat transfer or nasal wall shear stress, which seem to reflect the activity of the nasal trigeminal sensitive endings that provide sensation of nasal breathing. Furthermore, CFD has the unique capacity of making airway analysis of virtual surgery, predicting airflow changes after trial virtual modifications of the nasal airway. Thereby, CFD can assist the surgeon in deciding surgery and selecting the surgical techniques that better address the features of each specific nose. CFD has thus become a trend in nasal airflow assessment, providing reliable results that have been validated for analyzing airflow in the human nasal cavity. All these features make CFD analysis a mainstay in the armamentarium of the nasal surgeon. CFD analysis may become the gold standard for preoperative assessment of the nasal airway.

A numerical simulation of air flow in the human respiratory system for various environmental conditions

The functions of the nasal cavity are very important for maintaining the internal environment of the lungs since the inner walls of the nasal cavity control the temperature and saturation of the inhaled air with water vapor until the nasopharynx is reached. In this paper, three-dimensional computational studies of airflow transport in the models of the nasal cavity were carried out for the usual inspiratory velocity in various environmental conditions. Three-dimensional numerical results are compared with experimental data and calculations of other authors. Numerical results show that during normal breathing, the human nose copes with heat and relative moisture metabolism in order to balance the intra-alveolar conditions. It is also shown in this paper that a normal nose can maintain balance even in extreme conditions, for example, in cold and hot weather. The nasal cavity accelerates heat transfer by narrowing the air passages and swirls from the nasal concha walls of the inner cavity.

Voxel-based simulation of flow and temperature in the human nasal cavity

The nasal airway is an extremely complex structure, therefore grid generation for numerical prediction of airflow in the nasal cavity is time-consuming. This paper describes the development of a voxel-based model with a Cartesian structured grid, which is characterized by robust and automatic grid generation, and the simulation of the airflow and air-conditioning in an individual human nasal airway. Computed tomography images of a healthy adult nose were used to reconstruct a virtual three-dimensional model of the nasal airway. Simulations of quiet restful inspiratory flow were then performed using a Neumann boundary condition for the energy equation to adequately resolve the flow and heat transfer. General agreements of airflow patterns, which were a high-speed jet posterior to the nasal valve and recirculating flow that occupied the anterior part of the upper cavity, and temperature distributions of the airflow and septum wall were confirmed by comparing in-vivo measurements with numerical simulation results.

The effects of upper airway tissue motion on airflow dynamics

The human upper airway is not only geometrically complex, but it can also deform dynamically as a result of active muscle contraction and motility during respiration. How the active transformation of the airway geometry affects airflow dynamics during respiration is not well understood despite the importance of this knowledge towards improving current understanding of particle transport and deposition. In this study, particle imaging velocimetry (PIV) measurements of the fluid dynamics are presented in a physiologically realistic human upper airway replica for (i) the undeformed case and (ii) the case where realistic soft tissue motion during breathing is emulated. Results from this study show that extrathoracic wall motion alters the flow field significantly such that the fluid dynamics is distinctly different from the undeformed airway. Distinctive flow field patterns in the physiologically realistic airway include (i) fluid recirculation at the back of the tongue and cranial to the tip of the epiglottis during mid-inspiration, (ii) horizontal and posteriorly directed flow at the back of tongue at the peak of inspiration and (iii) a more homogeneous flow across the airway downstream from the epiglottis. These findings suggest that the active deformation of the human upper airway may potentially influence particle transport and deposition at the back of the tongue and therefore, highlights the importance of considering extrathoracic wall motion in future airway flow studies. D.

CFD analysis of the flow structure in a monkey upper airway validated by PIV experiments

Inhalation exposure to airborne contaminants has adverse effects on humans; however, related research is typically conducted using in vivo/in vitro tests on animals. Extrapolating the test results is complicated by anatomical and physiological differences between animals and humans and a lack of understanding of the transport mechanism inside their respective respiratory tracts. This study determined the detailed air-flow structure in the upper airway of a monkey. A steady computational fluid dynamics simulation, which was validated by previous particle image velocimetry measurements, was adopted for flow rates of 4 L/min and 10 L/min to analyze the flow structure from the nasal/oral cavities to the trachea region in a monkey airway model. The low Reynolds number type k-ε model provided a reasonably accurate prediction of the airflow in a monkey upper airway. Furthermore, it was confirmed that large velocity gradients were generated in the nasal vestibule and larynx regions, as well as increased turbulent air kinetic energy and wall sheer stress.

Geometry and airflow dynamics analysis in the nasal cavity during inhalation

BACKGROUND

A major issue among computational respiratory studies is the wide variety of nasal morphologies being studied, caused by both inter-population and inter-subject variations.

METHOD

Six nasal cavity geometries exhibiting diverse geometry variations were subjected to steady inhalation flow rate of 15L/min. to determine if any consistent flow behaviour could be found.

FINDINGS

Despite vastly different geometries we were able to identify consistent flow patterns including relatively high velocity in the nasal valve region, followed by flow continuing predominantly in the inferior half of the airway. We also found conformity among models where the inhaled air reached a near-conditioned state by the middle of the nasal cavity. Air from the front of the face reached the olfactory regions while air from the lateral sides of the face moved through the inferior half of the nasal cavity.

INTERPRETATION

The ability to predict gross flow features provides a baseline flow field to compare against. This contributes towards establishing well defined flow predictions and be used as a comparison for future larger studies.

Climatic adaptation in human inferior nasal turbinate morphology: Evidence from Arctic and equatorial populations

OBJECTIVES

The nasal turbinates directly influence the overall size, shape, and surface area of the nasal passages, and thus contribute to intranasal heat and moisture exchange. However, unlike the encapsulating walls of the nasal cavity, ecogeographic variation in nasal turbinate morphology among humans has not yet been established. Here we investigate variation in inferior nasal turbinate morphology in two populations from climatically extreme environments.

MATERIALS AND METHODS

Twenty-three linear measurements of the inferior turbinate, nasal cavity walls, and airway passages were collected from CT scans of indigenous modern human crania from Equatorial Africa (n = 35) and the Arctic Circle (n = 35). MANOVA and ANCOVA were employed to test for predicted regional and sex differences in morphology between the samples.

RESULTS

Significant morphological differences were identified between the two regional samples, with no evidence of significant sexual dimorphism or region-sex interaction effect. Individuals from the Arctic Circle possessed superoinferiorly and mediolaterally larger inferior turbinates compared to Equatorial Africans. In conjunction with the surrounding nasal cavity walls, these differences in turbinate morphology produced airway dimensions that were both consistent with functional expectations and more regionally distinct than either skeletal component independently.

CONCLUSION

This study documents the existence of ecogeographic variation in human nasal turbinate morphology reflecting climate-mediated evolutionary demands on intranasal heat and moisture exchange. Humans adapted to cold-dry environments exhibit turbinate morphologies that enhance contact between respired air and nasal mucosa to facilitate respiratory air conditioning. Conversely, humans adapted to hot-humid environments exhibit turbinate morphologies that minimize air-to-mucosa contact, likely to minimize airflow resistance and/or facilitate expiratory heat-shedding.

Direct visualizations of air flow in the human upper airway using in-vitro models

A better understanding of airflow characteristics in the upper airway (UA) is crucial in investigating obstructive sleep apnea (OSA), particle sedimentation, drug delivery, and many biomedical problems. Direct visualization of air flow patterns in in-vitro models with realistic anatomical structures is a big challenge. In this study, we constructed unique half-side transparent physical models of normal UA based on realistic anatomical structures. A smoke-wire method was developed to visualize the air flow in UA models directly. The results revealed that the airflow through the pharynx was laminar but not turbulent under normal inspiration, which suggested that compared with turbulent models, a laminar model should be more suitable in numerical simulations. The flow predicted numerically using the laminar model was consistent with the observations in the physical models. The comparison of the velocity fields predicted numerically using the half-side and complete models confirmed that it was reasonable to investigate the flow behaviors in UA using the half-side model. Using the laminar model, we simulated the flow and evaluated the effects of UA narrowing caused by rostral fluid shift on pharyngeal resistance. The results suggested that fluid shift could play an important role in the formation of hypopnea or OSA during sleep.

Computational modeling and validation of human nasal airflow under various breathing conditions

The human nose serves vital physiological functions, including warming, filtration, humidification, and olfaction. These functions are based on transport phenomena that depend on nasal airflow patterns and turbulence. Accurate prediction of these airflow properties requires careful selection of computational fluid dynamics models and rigorous validation. The validation studies in the past have been limited by poor representations of the complex nasal geometry, lack of detailed airflow comparisons, and restricted ranges of flow rate. The objective of this study is to validate various numerical methods based on an anatomically accurate nasal model against published experimentally measured data under breathing flow rates from 180 to 1100ml/s. The numerical results of velocity profiles and turbulence intensities were obtained using the laminar model, four widely used Reynolds-averaged Navier-Stokes (RANS) turbulence models (i.e., k-ε, standard k-ω, Shear Stress Transport k-ω, and Reynolds Stress Model), large eddy simulation (LES) model, and direct numerical simulation (DNS). It was found that, despite certain irregularity in the flow field, the laminar model achieved good agreement with experimental results under restful breathing condition (180ml/s) and performed better than the RANS models. As the breathing flow rate increased, the RANS models achieved more accurate predictions but still performed worse than LES and DNS. As expected, LES and DNS can provide accurate predictions of the nasal airflow under all flow conditions but have an approximately 100-fold higher computational cost. Among all the RANS models tested, the standard k-ω model agrees most closely with the experimental values in terms of velocity profile and turbulence intensity.

Numerical Investigation of Flow Characteristics in the Obstructed Realistic Human Upper Airway

The flow characteristics in the realistic human upper airway (HUA) with obstruction that resulted from pharyngeal collapse were numerically investigated. The 3D anatomically accurate HUA model was reconstructed from CT-scan images of a Chinese male patient (38 years, BMI 25.7). The computational fluid dynamics (CFD) with the large eddy simulation (LES) method was applied to simulate the airflow dynamics within the HUA model in both inspiration and expiration processes. The laser Doppler anemometry (LDA) technique was simultaneously adopted to measure the airflow fields in the HUA model for the purpose of testifying the reliability of LES approach. In the simulations, the representative respiration intensities of 16.8 L/min (slight breathing), 30 L/min (moderate breathing), and 60 L/min (severe breathing) were conducted under continuous inspiration and expiration conditions. The airflow velocity field and static pressure field were obtained and discussed in detail. The results indicated the airflow experiences unsteady transitional/turbulent flow in the HUA model under low Reynolds number. The airflow fields cause occurrence of forceful injection phenomenon due to the narrowing of pharynx caused by the respiratory illness in inspiration and expiration. There also exist strong flow separation and back flow inside obstructed HUA owing to the vigorous jet flow effect in the pharynx. The present results would provide theoretical guidance for the treatment of obstructive respiratory disease.

Computational simulation of temperature and velocity distribution in human upper respiratory airway during inhalation of hot air

The present study provides an accurate simulation of velocity and temperature distributions of inhalation thermal injury in a human upper airway, including vestibule, nasal cavity, paranasal sinuses, nasopharynx, oropharynx, larynx, and upper part of main bronchus. To this end, a series of CT scan images, taken from an adult woman, was used to construct a three dimensional model. The airway walls temperature was adjusted according to existing in vivo temperature measurements. Also, in order to cover all breathing activities, five different breathing flow rates (10, 15, 20, 30, and 40 l/min) and different ambient air temperatures (100, 200, 300, 400, and 500 °C) were studied. Different flow regimes, including laminar, transitional, and turbulence were considered and the simulations were validated using reliable experimental data. The results show that nostrils, vestibule, and nasal cavity are damaged more than other part of airway. Finally, In order to obtain the heat flux through the walls, correlations for Nusselt number for each individual parts of airway (vestibule, main upper airway, nasopharynx etc.,) are proposed.

Dynamics of airflow in a short inhalation

During a rapid inhalation, such as a sniff, the flow in the airways accelerates and decays quickly. The consequences for flow development and convective transport of an inhaled gas were investigated in a subject geometry extending from the nose to the bronchi. The progress of flow transition and the advance of an inhaled non-absorbed gas were determined using highly resolved simulations of a sniff 0.5 s long, 1 l s⁻¹ peak flow, 364 ml inhaled volume. In the nose, the distribution of airflow evolved through three phases: (i) an initial transient of about 50 ms, roughly the filling time for a nasal volume, (ii) quasi-equilibrium over the majority of the inhalation, and (iii) a terminating phase. Flow transition commenced in the supraglottic region within 20 ms, resulting in large-amplitude fluctuations persisting throughout the inhalation; in the nose, fluctuations that arose nearer peak flow were of much reduced intensity and diminished in the flow decay phase. Measures of gas concentration showed non-uniform build-up and wash-out of the inhaled gas in the nose. At the carina, the form of the temporal concentration profile reflected both shear dispersion and airway filling defects owing to recirculation regions.

Tour of a labyrinth: exploring the vertebrate nose

This special issue of The Anatomical Record is the outcome of a symposium entitled "Inside the Vertebrate Nose: Evolution, Structure and Function." The skeletal framework of the nasal cavity is a complicated structure that often houses sinuses and comprises an internal skeleton of bone or cartilage that can vary greatly in architecture among species. The nose serves multiple functions, including olfaction and respiratory air-conditioning, and its morphology is constrained by evolution, development, and conflicting demands on cranial space, such as enlarged orbits. The nasal cavity of vertebrates has received much more attention in the last decade due to the emergence of nondestructive methods that allow improved visualization of the internal anatomy of the skull, such as high-resolution x-ray computed tomography and magnetic resonance imaging. The 17 articles included here represent a broad range of investigators, from paleontologists to engineers, who approach the nose from different perspectives. Key topics include the evolution and development of the nose, its comparative anatomy and function, and airflow through the nasal cavity of individual species. In addition, this special issue includes review articles on anatomical reduction of the olfactory apparatus in both cetaceans and primates (the vomeronasal system), as well as the molecular biology of olfaction in vertebrates. Together these articles provide an expansive summary of our current understanding of vertebrate nasal anatomy and function. In this introduction, we provide background information and an overview of each of the three primary topics, and place each article within the context of previous research and the major challenges that lie ahead.

Review of computational fluid dynamics in the assessment of nasal air flow and analysis of its limitations

Nasal breathing difficulties (NBD) are a widespread medical condition, yet decisions pertaining to the surgical treatment of chronic NBD still imply a significant degree of subjective judgement of the surgeon. The current standard objective examinations for nasal flow, e.g., rhinomanometry and acoustic rhinomanometry, do not suffice to reliably direct the surgeon on the extent of any necessary surgery. In the last two decades, several groups have therefore considered the numerical simulation of nasal airflow. Currently, these analyses take many hours of labor from the operator, and require a huge amount of computer time and the use of expensive commercial software. Most often, their results are insufficiently validated so that virtual surgery, which is the eventual application, is still absent in clinical practice. Very recently, however, attempts at considering the finest details of the flow are beginning to appear, for example unsteady turbulent simulations validated through laboratory measurements through particle image velocimetry. In this paper, we first discuss recent developments in how computational fluid dynamics (CFD) is helping surgeons improve their understanding of nasal physiology and the effect of surgical modifications on the airflow in the nasal cavity. In a second part, the procedural and modeling challenges that still prevent CFD from being routinely used in clinical practice are surveyed and critically discussed.

Fluid-structure interaction modeling of upper airways before and after nasal surgery for obstructive sleep apnea

Nasal obstruction frequently has been associated with obstructive sleep apnea (OSA). Although correction of an obstructed nasal airway is considered an important component in OSA treatment, the effect of nasal surgery on OSA remains controversial. Variation in airway anatomy between before and after nasal surgery may cause significant differences in airflow patterns within the upper airway. In this paper, anatomically accurate models of the interaction between upper airway and soft palate were developed from prenasal and post-nasal surgery multidetector computed tomography data of a patient with OSA and nasal obstruction. Computational modeling for inspiration and expiration was performed by using fluid-structure interaction method. The airflow characteristics such as velocity, turbulence intensity and pressure drop, and displacement distribution of soft palate are selected for comparison. Airway resistances significantly decrease after the nasal surgery, especially in the velopharynx region because of an enlarged pharyngeal cavity and a reduced upstream resistance. Meanwhile, the decreased aerodynamic force would result in a smaller displacement of soft palates, which would lead to slight impact of the soft palate motion on the airflow characteristics. The present results suggest that airflow distribution in the whole upper airway and soft palate motions have improved following nasal surgery.

Inspirational airflow patterns in deviated noses: a numerical study

This study attempts to evaluate the effects of deviation of external nose to nasal airflow patterns. Four typical subjects were chosen for model reconstruction based on computed tomography images of undeviated, S-shaped deviated, C-shaped deviated and slanted deviated noses. To study the hypothetical influence of deviation of external nasal wall on nasal airflow (without internal blockage), the collapsed region along the turbinate was artificially reopened in all the three cases with deviated noses. Computational fluid dynamics simulations were carried out in models of undeviated, original deviated and reopened nasal cavities at both flow rates of 167 and 500 ml/s. The shape of the anterior nasal roof was found to be collapsed on one side of the nasal airways in all the deviated noses. High wall shear stress region was found around the collapsed anterior nasal roof. The nasal resistances in cavities with deviated noses were considerably larger than healthy nasal cavity. Patterns of path-line distribution and wall shear stress distribution were similar between original deviated and reopened models. In conclusion, the deviation of an external nose is associated with the collapse of one anterior nasal roof. The crooked external nose induced a larger nasal resistance compared to the undeviated case, while the internal blockage of the airway along the turbinates further increased it.

Revisiting human nose anatomy: phylogenic and ontogenic perspectives

This review suggests revisiting nose anatomy by considering the ethmoidal labyrinths as part of the olfactory nose and not as paranasal sinuses. Phylogenetically, the olfactory and respiratory organs of the most primitive vertebrates are separated. Exaptation, a mechanism of evolution, may explain the fusion of the olfactory and respiratory organs in dipnoi. The respiratory and olfactory noses remain anatomically separated by the transverse lamina in most mammals, whose olfactory labyrinth is a blind recess housing the ethmoturbinates. In humans, the partitioning between the olfactory cleft and the ethmoid labyrinth seems to be a consequence of ethmoid bone remodeling induced by the acquisition of an upright posture. The ethmoid bone is derived from the cartilaginous nasal capsule of primitive vertebrates and considered to be a highly conserved region among the bony elements of the skull base. It appears to be involved only in housing and protecting the olfactory function. During the early stages of human fetal development, rupture of the oronasal membrane leads to the integration of the primary olfactory sac in the future respiratory organ. The cartilaginous nasal capsule appears in the tissue under the brain and around the olfactory channels. Its early fetal development is classically regarded as the beginning of paranasal sinus formation. From phylogenic and ontogenic perspectives, it may be regarded as the development of the olfactory labyrinth as modified by the remodeling process of the human face and skull base. The endochondral bony origin of the ethmoid labyrinths makes them substantially different from the other paranasal sinuses.

Acquisition of detailed laryngeal flow measurements in geometrically realistic models

Characterization of laryngeal flow velocity fields is important to understanding vocal fold vibration and voice production. One common method for acquiring flow field data is particle image velocimetry (PIV). However, because using PIV with models that have curved surfaces is problematic due to optical distortion, experimental investigations of laryngeal airflow are typically performed using models with idealized geometries. In this paper a method for acquiring PIV data using models with realistic geometries is presented. Sample subglottal, intraglottal, and supraglottal PIV data are shown. Capabilities and limitations are discussed, and suggestions for future implementation are provided.

Correlation of nasal morphology to air-conditioning and clearance function

Nasal morphology plays an important functional role in the maintenance of upper airway health. Identification of functional regions, based on morphological attributes, assists in correlating location to primary purpose. The effects of morphological variation on heat and water mass transport in congested and patent nasal airways were investigated by examining nasal cross-sectional MRI images from 8 healthy subjects. This research confirms the previous identification of functional air-conditioning regions within the nose. The first is the anterior region where the morphology prevents over-stressing of tissue heat and fluid supply near the nares. The second is the mid region where low flow velocity favours olfaction and particle deposition. The third is the posterior region which demonstrates an increase in heat and water mass flux coefficients to compensate for rising air humidity and temperature. Factors identified within the congested airway that favour enhanced mucocillary clearance were also identified.

Evaluation and comparison of nasal airway flow patterns among three subjects from Caucasian, Chinese and Indian ethnic groups using computational fluid dynamics simulation

Nasal airflow is one of the most important determinants for nasal physiology. During the long evolution of human beings, different races have developed their own attributes of nasal morphologies which result in variations of nasal airflow patterns and nasal functions. This study evaluated and compared the effects of differences of nasal morphology among three healthy male subjects from Caucasian, Chinese and Indian ethnic groups on nasal airflow patterns using computational fluid dynamics simulation. By examining the anterior nasal airway, the nasal indices and the nostril shapes of the three subjects were found to be similar to nasal cavities of respective ethnic groups. Computed tomography images of these three subjects were obtained to reconstruct 3-dimensional models of nasal cavities. To retain the flow characteristics around the nasal vestibules, a 40 mm-radius semi sphere was assembled around the human face for the prescription of zero ambient gauge pressure. The results show that more airflow tends to pass through the middle passage of the nasal airway in the Caucasian model, and through the inferior portion in the Indian model. The Indian model was found with extremely low flow flux flowing through the olfactory region. The sizes of vortexes near the anterior cavity were found to be correlated with the angles between the upper nasal valve wall and the anterior head of the nasal cavity.

Visual exploration of nasal airflow

Rhinologists are often faced with the challenge of assessing nasal breathing from a functional point of view to derive effective therapeutic interventions. While the complex nasal anatomy can be revealed by visual inspection and medical imaging, only vague information is available regarding the nasal airflow itself: Rhinomanometry delivers rather unspecific integral information on the pressure gradient as well as on total flow and nasal flow resistance. In this article we demonstrate how the understanding of physiological nasal breathing can be improved by simulating and visually analyzing nasal airflow, based on an anatomically correct model of the upper human respiratory tract. In particular we demonstrate how various Information Visualization (InfoVis) techniques, such as a highly scalable implementation of parallel coordinates, time series visualizations, as well as unstructured grid multi-volume rendering, all integrated within a multiple linked views framework, can be utilized to gain a deeper understanding of nasal breathing. Evaluation is accomplished by visual exploration of spatio-temporal airflow characteristics that include not only information on flow features but also on accompanying quantities such as temperature and humidity. To our knowledge, this is the first in-depth visual exploration of the physiological function of the nose over several simulated breathing cycles under consideration of a complete model of the nasal airways, realistic boundary conditions, and all physically relevant time-varying quantities.

Inflow boundary profile prescription for numerical simulation of nasal airflow

Knowledge of how air flows through the nasal passages relies heavily on model studies, as the complexity and relative inaccessibility of the anatomy prevents detailed in vivo measurement. Almost all models to date fail to incorporate the geometry of the external nose, instead employing a truncated inflow. Typically, flow is specified to enter the model domain either directly at the nares (nostrils), or via an artificial pipe inflow tract attached to the nares. This study investigates the effect of the inflow geometry on flow predictions during steady nasal inspiration. Models that fully replicate the internal and external nasal airways of two anatomically distinct subjects are used as a reference to compare the effects of common inflow treatments on physiologically relevant quantities including regional wall shear stress and particle residence time distributions. Inflow geometry truncation is found to affect flow predictions significantly, though slightly less so for the subject displaying more pronounced passage area contraction up to the internal nasal valve. For both subject geometries, a tapered pipe inflow provides a better approximation to the natural inflow than a blunt velocity profile applied to the nares. Computational modelling issues are also briefly outlined, by comparing quantities predicted using different surface tessellations, and by evaluation of domain-splitting techniques.

Nasal architecture: form and flow

Current approaches to model nasal airflow are reviewed in this study, and new findings presented. These new results make use of improvements to computational and experimental techniques and resources, which now allow key dynamical features to be investigated, and offer rational procedures to relate variations in anatomical form. Specifically, both replica and simplified airways of a single subject were investigated and compared with the replica airways of two other individuals with overtly differing geometries. Procedures to characterize and compare complex nasal airway geometry are first outlined. It is then shown that coupled computational and experimental studies, capable of obtaining highly resolved data, reveal internal flow structures in both intrinsically steady and unsteady situations. The results presented demonstrate that the intimate relation between nasal form and flow can be explored in greater detail than hitherto possible. By outlining means to compare complex airway geometries and demonstrating the effects of rational geometric simplification on the flow structure, this work offers a fresh approach to studies of how natural conduits guide and control flow. The concepts and tools address issues that are thus generic to flow studies in other physiological systems.

Mechanics of airflow in the human nasal airways

The mechanics of airflow in the human nasal airways is reviewed, drawing on the findings of experimental and computational model studies. Modelling inevitably requires simplifications and assumptions, particularly given the complexity of the nasal airways. The processes entailed in modelling the nasal airways (from defining the model, to its production and, finally, validating the results) is critically examined, both for physical models and for computational simulations. Uncertainty still surrounds the appropriateness of the various assumptions made in modelling, particularly with regard to the nature of flow. New results are presented in which high-speed particle image velocimetry (PIV) and direct numerical simulation are applied to investigate the development of flow instability in the nasal cavity. These illustrate some of the improved capabilities afforded by technological developments for future model studies. The need for further improvements in characterising airway geometry and flow together with promising new methods are briefly discussed.