Nonradiative Energy Transfer from CsPbBr3 Nanocrystals to CdSe/CdS Nanocrystals for Efficient Light Down Conversion

Semiconductor nanocrystals (NCs) are emerging luminescent materials with superior optical properties. However, the light-conversion application of NCs is restricted by reabsorption-induced fluorescent quenching. Here, a NC-NC Förster resonance energy transfer (FRET) system is developed by employing large CsPbBr₃ NCs as donors and CdSe/CdS NCs as acceptors. The FRET systems using toluene and octadecene as solvents show decreases of 10% and 14%, respectively, in the integrated photoluminescence (PL) intensity, far below the reabsorption loss observed in concentrated CdSe/CdS NCs (>30%) at the same color purity. Notably, we demonstrate by transient absorption measurements that the styrene-mediated FRET system involves a Dexter energy transfer process, which enables the harvesting of triplet excitons and leads to an additional PL enhancement at system level by a maximum of 40% instead of fluorescence quenching. The remarkably improved light-conversion efficiency and antiquenching property make the proposed NC-NC system superior in light down-conversion applications.

Nanoparticle Assembling Dynamics Induced by Pulsed Optical Force

Femtosecond (fs) laser trapping dynamics is summarized for silica, hydrophobically modified silica, and polystyrene nanoparticles (NPs) in aqueous solution, highlighting their distinct optical trapping dynamics under CW laser. Mutually repulsive silica nanoparticles are tightly confined under fs laser compared to CW laser trapping and, upon increasing laser power, they are ejected from the focus as an assembly. Hydrophobically modified silica and polystyrene (PS) NPs are sequentially ejected just like a stream or ablated, giving bubbles. The ejection and bubbling take place with the direction perpendicular to laser polarization and its direction is randomly switched from one to the other. These characteristic features are interpreted from the viewpoint of single assembly formation of NPs at an asymmetric position in the optical potential. Temporal change in optical forces map is prepared for a single PS NP by calculating scattering, gradient, and temporal forces. The relative contribution of the forces changes with the volume increase of the assembly and, when the pushing force along the trapping pulse propagation overcome the gradient in the focal plane, the assembly undergoes the ejection. Further fs multiphoton absorption is induced for the larger assembly leading to bubble generation. The assembling, ejection, and bubbling dynamics of NPs are characteristic features of pulsed optical force and are considered as a new platform for developing new material fabrication method.

From Nanosecond Photochemistry to Optical Force Chemistry: My Journey

Laser was invented in 1960 and soon introduced to chemistry research. We started time-resolved spectroscopy and photochemistry and initial trial was focused to nanosecond and then picosecond electronic absorption spectroscopy for studying molecular electronic excited states, charge separation in molecular complexes, and intermolecular electron transfer in solution. We considered that not only time-resolved but also space-resolved chemistry would be important for future laser-based chemistry and combined pulsed lasers with optical microscopes. Spectroscopy, photochemistry, ablation, and spatial arrangement of single microparticles and microdroplets in solution were carried out. Further we shifted from micro to nano and opened a new field covering spectroscopy, ablation, phase transition, crystallization, patterning, and fabrication. The progress is summarized and discussed as time-resolved nano spectroscopy, ablation nano dynamics, and optical force chemistry.

Formation of thioglucoside single crystals by coherent molecular vibrational excitation using a 10-fs laser pulse

Compound crystallization is typically achieved from supersaturated solutions over time, through melting, or via sublimation. Here a new method to generate a single crystal of thioglucoside using a sub-10-fs pulse laser is presented. By focusing the laser pulse on a solution in a glass cell, a single crystal is deposited at the edge of the ceiling of the glass cell. This finding contrasts other non-photochemical laser-induced nucleation studies, which report that the nucleation sites are in the solution or at the air-solution interface, implying the present crystallization mechanism is different. Irradiation with the sub-10-fs laser pulse does not heat the solution but excites coherent molecular vibrations that evaporate the solution. Then, the evaporated solution is thought to be deposited on the glass wall. This method can form crystals even from unsaturated solutions, and the formed crystal does not include any solvent, allowing the formation of a pure crystal suitable for structural analysis, even from a minute amount of sample solution.

Laser Desorption Combined with Laser Postionization for Mass Spectrometry

Lasers with pulse lengths from nanoseconds to femtoseconds and wavelengths from the mid-infrared to extreme ultraviolet (UV) have been used for desorption or ablation in mass spectrometry. Such laser sampling can often benefit from the addition of a second laser for postionization of neutrals. The advantages offered by laser postionization include the ability to forego matrix application, high lateral resolution, decoupling of ionization from desorption, improved analysis of electrically insulating samples, and potential for high sensitivity and depth profiling while minimizing differential detection. A description of postionization by vacuum UV radiation is followed by a consideration of multiphoton, short pulse, and other postionization strategies. The impacts of laser pulse length and wavelength are considered for laser desorption or laser ablation at low pressures. Atomic and molecular analysis via direct laser desorption/ionization using near-infrared ultrashort pulses is described. Finally, the postionization of clusters, the role of gaseous collisions, sampling at ambient pressure, atmospheric pressure photoionization, and the addition of UV postionization to MALDI are considered.

Novel physical chemistry approaches in biophysical researches with advanced application of lasers: Detection and manipulation

Novel methodologies utilizing pulsed or intense CW irradiation obtained from lasers have a major impact on biological sciences. In this article, recent development in biophysical researches fully utilizing the laser irradiation is described for three topics, time-resolved fluorescence spectroscopy, time-resolved thermodynamics, and manipulation of the biological assemblies by intense laser irradiation. First, experimental techniques for time-resolved fluorescence spectroscopy are concisely explained in Section 2. As an example of the recent application of time-resolved fluorescence spectroscopy to biological systems, evaluation of the viscosity of lipid bilayer membranes is described. The results of the spectroscopic experiments strongly suggest the presence of heterogeneous membrane structure with two different viscosity values in liposomes formed by a single phospholipid. Section 3 covers the time-resolved thermodynamics. Thermodynamical properties are important to characterize biomolecules. However, measurement of these quantities for short-lived intermediate species has been impossible by traditional thermodynamical techniques. Recently, development of a spectroscopic method based on the transient grating method enables us to measure these quantities and also to elucidate reaction kinetics which cannot be detected by other spectroscopic methods. The principle of the measurements and applications to some protein reactions are reviewed. Manipulation and fabrication of supramolecues, amino acids, proteins, and living cells by intense laser irradiation are described in Section 4. Unconventional assembly, crystallization and growth, amyloid fibril formation, and living cell manipulation are achieved by CW laser trapping and femtosecond laser-induced cavitation bubbling. Their spatio-temporal controllability is opening a new avenue in the relevant molecular and bioscience research fields. This article is part of a Special Issue entitled "Biophysical Exploration of Dynamical Ordering of Biomolecular Systems" edited by Dr. Koichi Kato.

Femtosecond-Laser-Enhanced Amyloid Fibril Formation of Insulin

Femtosecond (fs)-laser-induced crystallization as a novel crystallization technique was proposed for the first time by our group, where the crystallization time can be significantly shortened under fs laser irradiation. Similarly, we have further extended our investigation to amyloid fibril formation, also known as a nucleation-dependence process. Here we demonstrate that the necessary time for amyloid fibril formation can be significantly shortened by fs laser irradiation, leading to favorable enhancement. The enhancement was confirmed by both spectral measurements and direct observations of amyloid fibrils. The thioflavin T fluorescence intensity of laser-irradiated solution increased earlier than that of the control solution, and such a difference was simultaneously revealed by ellipticity changes. At the same time before intensity saturation in fluorescence, the number of amyloid fibrils obtained under laser irradiation was generally more than that in the control solution. Besides, such an enhancement is correlated to the laser power threshold of cavitation bubbling. Possible mechanisms are proposed by referring to fs-laser-induced crystallization and ultrasonication-induced amyloid fibril formation.