Regulating the photoluminescence of aluminium complexes from non-luminescence to room-temperature phosphorescence by tuning the metal substituents

Although luminescent aluminum compounds have been utilized for emitting and electron transporting layers in organic light-emitting diodes, most of them often exhibit not phosphorescence but fluorescence with lower photoluminescent quantum yields in the aggregated state than those in the amorphous state due to concentration quenching. Here we show the synthesis and optical properties of β-diketiminate aluminum complexes, such as crystallization-induced emission (CIE) and room-temperature phosphorescence (RTP), and the substituent effects of the central element. The dihaloaluminum complexes were found to exhibit the CIE property, especially RTP from the diiodo complex, while the dialkyl ones showed almost no emission in both solution and solid states. Theoretical calculations suggested that undesired structural relaxation in the singlet excited state of dialkyl complexes should be suppressed by introducing electronegative halogens instead of alkyl groups. Our findings could provide a molecular design not only for obtaining luminescent complexes but also for achieving triplet-harvesting materials.

Luminescent Hybrid BPA.DA-NVP@Eu2L3 Materials: In Situ Synthesis, Spectroscopic, Thermal, and Mechanical Characterization

A series of homogeneous hybrid BPA.DA-NVP@Eu2L3 materials were obtained through an in situ approach where the luminescent dopant was formed at the molecular level with different contents (0.1; 0.2; 0.5; 1; and 2% by weight). A Europium(III) complex (Eu2L3) with quinoline-2,4-dicarboxylic acid was applied as a luminescence additive while a polymer matrix consisted of a combination of bisphenol A diacrylate (BPA.DA) and N-vinylpyrrolidone (NVP) monomers. Synthesis steps and the final materials were monitored by NMR and Fourier transform infrared spectroscopy (FTIR). The emission, excitation spectra, lifetime, and quantum yield measurements were applied for the determination of the photophysical characteristics. The thermal and mechanical properties of the obtained materials were tested via thermal analysis methods (TG/DTG/DSC and TG-FTIR) in air and nitrogen atmospheres, dynamic mechanical analysis (DMA), and hardness and bending measurements. Generally, even a small addition of the metal complex component causes changes in the thermal, mechanical, and luminescent properties. Hybrid materials with a greater europium complex content are characterized by a lower stiffness and hardness while the heterogeneity and the flexibility of the samples increase. A very small amount of an Eu2L3 admixture (0.1% wt.) in a hybrid material causes an emission in the red spectral range and the luminescence intensity was reached for the BPA-DA-NVP@1%Eu2L3 material. These materials may be potentially used in chemical sensing, security systems, and protective coatings against UV.

Biocompatible Silica-Polyethylene Glycol-Based Composites for Immobilization of Microbial Cells by Sol-Gel Synthesis

Biocatalysts based on the methylotrophic yeast Ogataea polymorpha VKM Y-2559 immobilized in polymer-based nanocomposites for the treatment of methanol-containing wastewater were developed. The organosilica composites with different matrix-to-filler ratios derived from TEOS/MTES in the presence of PEG (SP_EG-composite) and from silicon-polyethylene glycol (STP_EG-composite) differ in the structure of the silicate phase and its distribution in the composite matrix. Methods of fluorescent and scanning microscopy first confirmed the formation of an organosilica shell around living yeast cells during sol-gel bio-STP_EG-composite synthesis. Biosensors based on the yeast cells immobilized in STP_EG- and SP_EG-composites are characterized by effective operation: the coefficient of sensitivity is 0.85 ± 0.07 mgO₂ × min^-1 × mmol^-1 and 0.87 ± 0.05 mgO₂ × min^-1 × mmol^-1, and the long-term stability is 10 and 15 days, respectively. The encapsulated microbial cells are protected from UV radiation and the toxic action of heavy metal ions. Biofilters based on the developed biocatalysts are characterized by high effectiveness in the utilization of methanol-rich wastewater-their oxidative power reached 900 gO₂/(m³ × cycle), and their purification degree was up to 60%.

Effect of the Coupling Agent (3-Aminopropyl) Triethoxysilane on the Structure and Fire Behavior of Solvent-Free One-Pot Synthesized Silica-Epoxy Nanocomposites

Uniformly distributed silica/epoxy nanocomposites (2 and 6 wt.% silica content) were obtained through a “solvent-free one-pot” process. The inorganic phases were obtained through “in situ” sol-gel chemistry from two precursors, tetraethyl orthosilicate (TEOS) and (3-aminopropyl)-triethoxysilane (APTES). APTES acts as a coupling agent. Surprisingly when changing TEOS/APTES molar ratio (from 2.32 to 1.25), two opposite trends of glass transformation temperature (Tg) were observed for silica loading, i.e., at lower content, a decreased Tg (for 2 wt.% silica) and at higher content an increased Tg (for 6 wt.% silica) was observed. High-Resolution Transmission Electron Microscopy (HRTEM) showed the formation of multi-sheet silica-based nanoparticles with decreasing size at a lower TEOS/APTES molar ratio. Based on a recently proposed mechanism, the experimental results can be explained by the formation of a co-continuous hybrid network due to reorganization of the epoxy matrix around two different “in situ” sol-gel derived silicatic phases, i.e., micelles formed mainly by APTES and multi-sheet silica nanoparticles. Moreover, the concentration of APTES affected the size distribution of the multi-sheet silica-based nanoparticles, leading to the formation of structures that became smaller at a higher content. Flammability and forced-combustion tests proved that the nanocomposites exhibited excellent fire retardancy.

Solvent-Free One-Pot Synthesis of Epoxy Nanocomposites Containing Mg(OH)2 Nanocrystal-Nanoparticle Formation Mechanism

Epoxy nanocomposites containing Mg(OH)₂ nanocrystals (MgNCs, 5.3 wt %) were produced via an eco-friendly "solvent-free one-pot" process. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and thermogravimetric analysis (TGA) confirm the presence of well-dispersed MgNCs. HRTEM reveals the presence also of multisheet-silica-based nanoparticles and a tendency of MgNCs to intergrow, leading to complex nanometric structures with an intersheet size of ∼0.43 nm, which is in agreement with the lattice spacing of the Mg(OH)₂ (001) planes. The synthesis of MgNCs was designed on the basis of a mechanism initially proposed for the preparation of multisheet-silica-based/epoxy nanocomposites. The successful "in situ" generation of MgNCs in the epoxy via a "solvent-free one-pot" process confirms the validity of the earlier disclosed mechanism and thus opens up possibilities of new NCs with different fillers and polymer matrix. The condition would be the availability of a nanoparticle precursor soluble in the hydrophobic resin, giving the desired phase through hydrolysis and polycondensation.

Hybrid Organic-Inorganic Materials and Interfaces With Mixed Ionic-Electronic Transport Properties: Advances in Experimental and Theoretical Approaches

The main goal of this mini-review is to provide an updated state-of-the-art of the hybrid organic-inorganic materials focusing mainly on interface phenomena involving ionic and electronic transport properties. First, we review the most relevant preparation techniques and the structural features of hybrid organic-inorganic materials prepared by solution-phase reaction of inorganic/organic precursor into organic/inorganic hosts and vapor-phase infiltration of the inorganic precursor into organic hosts and molecular layer deposition of organic precursor onto the inorganic surface. Particular emphasis is given to the advances in joint experimental and theoretical studies discussing diverse types of computational simulations for hybrid-organic materials and interfaces. We make a specific revision on the separately ionic, and electronic transport properties of these hybrid organic-inorganic materials focusing mostly on interface phenomena. Finally, we deepen into mixed ionic-electronic transport properties and provide our concluding remarks and give some perspectives about this growing field of research.

Unsymmetric Dumbbell-Shaped Polyhedral Oligomeric Silsesquioxane (POSS) Compound as a Single-Component POSS Hybrid

Dumbbell-shaped polyhedral oligomeric silsesquioxane (POSS) derivatives, in which two POSS units are linked through a bridge, have attracted attention in the last decade. Here, we prepared an unsymmetric dumbbell-shaped POSS derivative (3_Ph-iBu) in which isobutyl- and phenyl-substituted POSS units are linked by a disiloxane unit and compared its thermal properties with those of the corresponding symmetric isobutyl- and phenyl-substituted dumbbell-shaped POSS derivatives (3_iBu-iBu and 3_Ph-Ph, respectively). The symmetric isobutyl- and phenyl-substituted dumbbell-shaped POSS derivatives, 3_iBu-iBu and 3_Ph-Ph, were almost completely phase-separated during a mixing process. This phase separation is due to the limited solubility of phenyl-substituted POSS compounds, which are only soluble in tetrahydrofuran (THF) and insoluble in hydrocarbons such as n-hexane and toluene, while the isobutyl-substituted POSS derivatives exhibit a wider spectrum of soluble solvents. The unsymmetric dumbbell-shaped POSS, 3_Ph-iBu, showed hybrid properties of solubility in solvents and thermal behaviors. Differential scanning calorimetric (DSC) analysis showed that enthalpy of the phase transition of 3_Ph-iBu was significantly lower than those of the mixture of 3_iBu-iBu and 3_Ph-Ph. No apparent melting behavior was observed above the phase transition. The thermal degradation of the weakest isobutyl substituents improves in the present single-component hybrid structure.

Structure and Bottom-up Formation Mechanism of Multisheet Silica-Based Nanoparticles Formed in an Epoxy Matrix through an In Situ Process

Organic/inorganic hybrid composite materials with the dispersed phases in sizes down to a few tens of nanometers raised very great interest. In this paper, it is shown that silica/epoxy nanocomposites with a silica content of 6 wt % may be obtained with an "in situ" sol-gel procedure starting from two precursors: tetraethyl orthosilicate (TEOS) and 3-aminopropyl-triethoxysilane (APTES). APTES also played the role of a coupling agent. The use of advanced techniques (bright-field high-resolution transmission electron microscopy, HRTEM, and combined small- and wide-angle X-ray scattering (SAXS/WAXS) performed by means of a multirange device Ganesha 300 XL+) allowed us to evidence a multisheet structure of the nanoparticles instead of the gel one typically obtained through a sol-gel route. A mechanism combining in a new manner well-assessed knowledge regarding sol-gel chemistry, emulsion formation, and Ostwald ripening allowed us to give an explanation for the formation of the observed lamellar nanoparticles.

Paintable Hybrids with Thermally Stable Dual Emission Composed of Tetraphenylethene-Integrated POSS and MEH-PPV for Heat-Resistant White-Light Luminophores

Thermally stable dual emission followed by white-light luminescence from hybrid materials is reported. Hybrid films were prepared with a spin-coating method with the mixture solution containing tetraphenylethene (TPE)-integrated polyhedral oligomeric silsesquioxane (POSS) and poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV). TPE-tethered POSS (TPE-POSS) showed high compatibility with MEH-PPV. Therefore, homogeneous films with variable concentrations of TPE-POSS were obtained. Owing to good dispersion of rigid silica cubes into matrices, POSS-containing films demonstrated high thermal stability toward molecular rearrangement by annealing as well as pyrolysis, similar to conventional polymer hybrids. Furthermore, it was found that TPE-POSS was able to enhance emission efficiencies, probably by suppressing chain aggregation. By modulating introduction ratios of TPE-POSS, dual-emission properties followed by white-light luminescence composed of cyan and orange emissions from TPE-POSS and MEH-PPV, respectively, were accomplished. It should be noted that these color balances can be preserved even in the high-temperature region (425 K). Finally, white-light luminescent materials with thermal durability were obtained.

Optical Characteristics of Hybrid Macrocycles with Dithienogermole and Tricoordinate Boron Units

The introduction of unconventional elements into π-conjugated systems has been studied to manipulate the electronic states and properties of compounds. Herein, boron- and germanium-containing hybrid macrocycles, as a new class of element-hybrid conjugated systems, have been synthesized. The palladium-catalyzed Stille cross coupling of bis(bromothienyl)borane and bis(trimethylstannylthienyl)- or bis(trimethylstannylphenyl)-substituted dithienogermoles as the boron- and germanium-containing building blocks, respectively, produced a mixture of several macrocyclic compounds. Single-crystal X-ray analysis of the 2:2 coupling product revealed a planar structure with a cavity inside the macrocycle. The optical properties of the macrocyclic products indicated rather small electronic interactions between the building units. However, intramolecular photoenergy transfer from the dithienogermole unit to the boron unit was clearly observed with respect to the fluorescence spectra.

High Refractive-Index Hybrids Consisting of Water-Soluble Matrices with Bipyridine-Modified Polyhedral Oligomeric Silsesquioxane and Lanthanoid Cations

We report high refractive-index (RI) films composed of polyhedral oligomeric silsesquioxane (SSQ) matrices and various lanthanoid cations. The SSQ matrices were constructed from octaammonium SSQ by connecting with bipyridine dicarboxylic acid, which is expected to capture cations. By modulating the feed ratio between SSQ and dicarboxylic acid, the series of the SSQ matrices were obtained with variable cross-linking ratios among the SSQ units. Thin transparent films were able to be prepared through the drop-casting method with the aqueous mixtures containing SSQ matrices and various kinds of lanthanoid salts up to 40 wt %. From RI measurements, it was revealed that the increase of the amount of the metal ion can significantly lift up the RI values. In particular, critical losses of Abbe numbers, which theoretically have the trade-off relationship toward increases in RI values, were hardly detected. This effect could be obtained by cation assembly in local spots that are assisted by SSQ.

Stimuli-responsive luminochromic polymers consisting of multi-state emissive fused boron ketoiminate

Both thermochromic luminescence in solution and mechanochromic luminescence were each observed from conjugated polymers containing a fused boron complex.

Organic-Inorganic Hybrid Nanomaterials

The paramount progress in the field of organic–inorganic hybrid nanomaterials was stimulated by numerous applications in chemistry, physics, life sciences, medicine, and technology. Currently, in the field of hybrid materials, researchers may choose either to mimic complex natural materials or to compete with nature by constructing new artificial materials. The deep mechanistic understanding and structural insight achieved in recent years will guide a new wave in the design of hybrid materials at the atomic and molecular levels.

Characterization and Photophysical Properties of a Luminescent Aluminum Hydride Complex Supported by a β-Diketiminate Ligand

Aluminum hydrides are versatile compounds utilized as reducing agents, precursors of aluminum complexes, and as catalysts for polymerization reactions. However, their photophysical properties have been overlooked, although several luminescent aluminum complexes have been utilized conventionally for emitting layers in modern light-emitting devices. Herein, we report the synthesis and photophysical properties of a luminescent β-diketiminate dihydride complex through the reaction between lithium aluminum hydride and the corresponding ligand. The obtained compound exhibits crystallization-induced emission (CIE) properties at room temperature and long-lifetime phosphorescence at 80 K. Our experimental and theoretical investigations suggest that low-energy molecular vibration could play an important role in the realization of the CIE property.

Langmuir Nanoarchitectonics from Basic to Frontier

Methodology to combine nanotechnology and these organization processes has been proposed as a novel concept of nanoarchitectonics, which can fabricate functional materials with nanolevel units. As an instant nanoarchitectonics approach, confining systems within a two-dimensional plane to drastically reduce translational motion freedom can be regarded as one of the rational approaches. Supramolecular chemistry and nanofabrication and their related functions at the air-water interface with the concept of nanoarchitectonics would lead to the creation of a novel methodology of Langmuir nanoarchitectonics. In this feature article, we briefly summarize research efforts related to Langmuir nanoarchitectonics including the basics for anomalies in molecular interactions such as highly enhanced molecular recognition capabilities. It is also extended to frontiers including the fabrication of supramolecular receptors and two-dimensional patterns with subnanometer-scale structural regulation, manual control of molecular machines and receptors by hand-motion-like macroscopic actions, and the regulation of cell fates at nanoarchitected arrays of nanocarbon assemblies and at direct liquid interfaces.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

One-pot strategy for synthesis of open-cage silsesquioxane monomers

A novel synthetic strategy to access POSS monomers has been proposed; one reaction site of an open-cage POSS was capped, and the remaining two silanol groups were functionalized for polymerization. Importantly, the monomer can be obtained by one-pot synthesis without any troublesome isolation process.

Materials nanoarchitectonics at two-dimensional liquid interfaces

Much attention has been paid to the synthesis of low-dimensional materials from small units such as functional molecules. Bottom-up approaches to create new low-dimensional materials with various functional units can be realized with the emerging concept of nanoarchitectonics. In this review article, we overview recent research progresses on materials nanoarchitectonics at two-dimensional liquid interfaces, which are dimensionally restricted media with some freedoms of molecular motion. Specific characteristics of molecular interactions and functions at liquid interfaces are briefly explained in the first parts. The following sections overview several topics on materials nanoarchitectonics at liquid interfaces, such as the preparation of two-dimensional metal-organic frameworks and covalent organic frameworks, and the fabrication of low-dimensional and specifically structured nanocarbons and their assemblies at liquid-liquid interfaces. Finally, interfacial nanoarchitectonics of biomaterials including the regulation of orientation and differentiation of living cells are explained. In the recent examples described in this review, various materials such as molecular machines, molecular receptors, block-copolymer, DNA origami, nanocarbon, phages, and stem cells were assembled at liquid interfaces by using various useful techniques. This review overviews techniques such as conventional Langmuir-Blodgett method, vortex Langmuir-Blodgett method, liquid-liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks. The nanoarchitecture materials can be used for various applications such as molecular recognition, sensors, photodetectors, supercapacitors, supramolecular differentiation, enzyme reactors, cell differentiation control, and hemodialysis.

Optical, Electrical and Thermal Properties of Organic⁻Inorganic Hybrids with Conjugated Polymers Based on POSS Having Heterogeneous Substituents

Preparation of organic⁻inorganic hybrids with conventional conjugated polymers such as polyfluorene (PF) and poly(3-hexylthiophene) (P3HT) were demonstrated via the facile blending in solution by employing polyhedral oligomeric silsesquioxane (POSS) having heterogeneous alkyl substituents. From the optical measurements, it was shown that the modified POSS derivatives played a critical role in facilitating amorphous state of polymer matrices. Interestingly, although inter-strand interaction decreased after POSS addition in the hybrid films, thermal stability can be enhanced in the presence of the modified POSS with long alkyl chains. Furthermore, it was demonstrated that carrier mobilities through the hybrid film was minimally reduced by POSS. These results suggest that POSS should be a versatile building block to form hybrid with various types of polymers for enhancing durability without loss of electronic properties of organic components.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Materials Nanoarchitectonics for Mechanical Tools in Chemical and Biological Sensing

In this Focus Review, nanoarchitectonic approaches for mechanical-action-based chemical and biological sensors are briefly discussed. In particular, recent examples of piezoelectric devices, such as quartz crystal microbalances (QCM and QCM-D) and a membrane-type surface stress sensor (MSS), are introduced. Sensors need well-designed nanostructured sensing materials for the sensitive and selective detection of specific targets. Nanoarchitectonic approaches for sensing materials, such as mesoporous materials, 2D materials, fullerene assemblies, supported lipid bilayers, and layer-by-layer assemblies, are highlighted. Based on these sensing approaches, examples of bioanalytical applications are presented for toxic gas detection, cell membrane interactions, label-free biomolecular assays, anticancer drug evaluation, complement activation-related multiprotein membrane attack complexes, and daily biodiagnosis, which are partially supported by data analysis, such as machine learning and principal component analysis.

Nano Trek Beyond: Driving Nanocars/Molecular Machines at Interfaces

In 2016, the Nobel Prize in Chemistry was awarded for pioneering work on molecular machines. Half a year later, in Toulouse, the first molecular car race, a "nanocar race", was held by using the tip of a scanning tunneling microscope as an electrical remote control. In this Focus Review, we discuss the current state-of-the-art in research on molecular machines at interfaces. In the first section, we briefly explain the science behind the nanocar race, followed by a selection of recent examples of controlling molecules on surfaces. Finally, motion synchronization and the functions of molecular machines at liquid interfaces are discussed. This new concept of molecular tuning at interfaces is also introduced as a method for the continuous modification and optimization of molecular structure for target functions.

Open-cage silsesquioxane necklace polymers having closed-cage silsesquioxane pendants

A novel POSS monomer design has been proposed; a closed-cage POSS was tethered to an open-cage POSS, and the remaining two functional groups were employed for polymerization. The thermal and optical properties of the obtained main-chain type POSS polymers can be widely tuned by the substituents at the corners of the POSSs.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.