Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Induction of Highly Ordered Liquid Crystalline Phase of an Azobenzene Side Chain Polymer by Contact with 4'-Pentyl-4-cyanobiphenyl: An In Situ Study

The orientation of liquid crystal (LC) molecules is significantly governed by solid interfaces and free surfaces, and a variety of functional materials have been developed using these properties. Although LC materials are already in industrial use, particularly for LC display panels, various studies have been conducted in recent years to better grasp the interface behavior of LC molecules. In this work, we succeeded in in situ observations of induction of higher ordered LC phases at the interface between a side-chain LC azobenzene polymer film with a thickness of ∼400 nm and a low-molecular-mass nematic LC, 4'-pentyl-4-cyanobiphenyl of 35 μm thickness, using small-angle X-ray scattering measurements and polarized optical microscopy. It is revealed that the two different mesogens cooperatively form hybrid higher ordered smectic LC phases probably through weak electron transfer immediately after interfacial contact. The induction process consists of three stages in terms of dynamic structure evolutions. Upon UV irradiation, the hybrid smectic LC structure diminished. This study provides new insights into the behavior of LC molecules near the alignment film on the solid substrate.

Alignment Control of Smectic Layer Structures in Liquid-Crystalline Polymers by Photopolymerization with Scanned Slit Light

Photoalignment control of hierarchical structures is a key process to enhance the properties of optical and mechanical materials. We developed an in situ molecular alignment method, where photopolymerization with the scanned slit light causes molecular flow, leading to two-dimensional precise alignment of molecules over large areas; however, the alignment control has been explored only on a molecular scale. In this study, we demonstrate this photopolymerization-induced molecular flow, enabling mesoscopic alignment of smectic layer structures composed of anisotropic molecules. Side-chain liquid-crystalline polymers were obtained from two different monomers with or without alkyl spacers by photopolymerization with one-dimensionally scanned slit light. The polymer with an alkyl spacer displayed mesogens aligned parallel to the scanning direction, while the polymer with no alkyl spacer resulted in perpendicular alignment of mesogens to the scanning direction, regulated by the alignment of the polymer main chain along the light scanning direction. Moreover, the polymerization with the scanned light aligned not only the mesogens but also mesoscopic smectic layer structures over large areas, depending on the structure and scanning pattern of light. We envision that such a simple polymerization technique could become a powerful and versatile alignment platform of anisotropic materials in a wide range of scales.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Photo‐Imprinting of the Helical Organization in Liquid‐Crystal Networks Using Achiral Monomers and Circularly Polarized Light

Control over molecular motion is facilitated in materials with highly ordered nanoscale structures. Here we report on the fabrication of cholesteric liquid‐crystal networks by circularly polarized light irradiation, without the need for chiral dopant or plasticizer. The polymer network is obtained by photopolymerization of a smectic achiral diacrylate mesogen consisting of an azobenzene core and discrete oligodimethylsiloxane tails. The synchronous helical photoalignment and photopolymerization originate from the cooperative movement of the mesogens ordered in well‐defined responsive structures, together with the flexibility of the oligodimethylsiloxane blocks. The resulting thin films show excellent thermal stability and light‐induced memory features with reversible responses. Additionally, we demonstrate the fabrication of photo‐patterned films of liquid‐crystal networks with opposite helical senses. These findings provide a new method to make light‐controllable chiroptical materials with exciting applications in optics and photonics.

Photo-Induced Crawling Motion of Azobenzene Crystals on Modified Gold Surfaces

Photo-induced crawling motion of a crystal of 3,3'-dimethylazobenzene (DMAB) on gold surfaces having different surface properties and various patterns was studied. DMAB crystals crawl continuously when exposed to UV and visible lights simultaneously from different directions. On a gold surface functionalized by a thiol having a hydroxyl group at the terminal (16-hydroxy-1-hexadecanethiol (HOC₁₆SH)), the crystals crawled with a relatively high velocity (ca. 4 μm min^-1), and they changed the crystal shape while keeping a distinct crystal face. On a gold surface functionalized by a thiol having an alkyl chain terminal (1-hexadecanethiol (C₁₆SH)), the crawling was observed with a slower velocity (ca. 1.5 μm min^-1). However, the shape of the crystals became a droplet-like shape soon after the irradiation started, and the shape persisted during the motion. Light intensity dependence of the crawling velocity of the droplet-like crystal on this surface showed that UV light has stronger dependence for the motion than the visible light. On a substrate with a stripe pattern of alternating C₁₆SH-modified gold and hexadecyltrimethylsilane (HDTMS)-modified glass, crystals crawled only on the surface of the C₁₆SH-modified gold, which may be due to the wettability hysteresis at the surface. On a substrate with a stripe pattern of HOC₁₆SH-modified gold and HDTMS-modified glass, crystals were attracted to the gold side. On a gold substrate with a periodic pattern of different height (ca. 50 nm) but having a uniform treatment with C₁₆SH, crystals crawled up and down the steps without significant disturbance at the boundary of the step. Therefore, wettability of the surface has a greater impact on controlling the motion of the crystal than the surface structure. The present results not only unveil the crawling behavior on various surfaces but also offer a guide to controlling the motion toward applications for novel carriage vehicles to transport molecules/objects on a surface.

Droplets on substrates with oscillating wettability

In recent decades novel solid substrates have been designed which change their wettability in response to light or an electrostatic field. Here, we investigate a droplet on substrates with oscillating uniform wettability by varying minimum and maximum contact angles and frequency. To simulate this situation, we use our previous work [Grawitter and Stark, Soft Matter, 2021, 17, 2454], where we implemented the boundary element method in combination with the Cox-Voinov law for the contact-line velocity, to determine the fluid flow inside a droplet. After a transient regime the droplet performs steady oscillations, the amplitude of which decreases with increasing frequency. For slow oscillations our numerical results agree well with the linearized spherical-cap model. They collapse on a master curve when we rescale frequency by a characteristic relaxation time. In contrast, for fast oscillations we observe significant deviations from the master curve. The decay of the susceptibility is weaker and the phase shift between oscillations in wettability and contact angle stays below the predicted π/2. The reason becomes obvious when studying the combined dynamics of droplet height and contact angle. It reveals non-reciprocal shape changes during one oscillation period even at low frequencies due to the induced fluid flow inside the droplet, which are not captured by the spherical-cap model. Similar periodic non-reciprocal shape changes occur at low frequencies when the droplet is placed on an oscillating nonuniform wettability profile with six-fold symmetry. Such profiles are inspired by the light intensity pattern of Laguerre-Gauss laser modes. Since the non-reciprocal shape changes induce fluid circulation, which is controllable from the outside, our findings envisage the design of targeted microfluidic transport of solutes inside the droplet.

(Hetero)arylazo-1,2,3-triazoles: "Clicked" Photoswitches for Versatile Functionalization and Electronic Decoupling

The development of light-responsive chemical systems often relies on the rational design and suitable incorporation of molecular photoswitches such as azobenzenes. Linking a photoswitch core with another π-conjugated molecular entity may give rise to intramolecular electronic coupling, which can dramatically impair the photoswitch function. Decoupling strategies have been developed based on additionally inserting a linker that can disrupt the through-bond electronic communication. Here we show that 1,2,3-triazole-a commonly used decoupling spacer-can be directly merged into the azoswitch core to construct a class of "self-decoupling" azoswitches called (hetero)arylazo-1,2,3-triazoles. Such azotriazole photoswitches are easily accessed and modularly functionalized by click chemistry. Their photoswitch property can be optimized by rational design of the substituent groups or heteroaryl rings, allowing (near-)quantitative E⇆Z photoisomerization yields and tunable Z-isomer thermal half-lives from days to years. Combined experimental and theoretical results demonstrate that the electronic structure of the photoswitch core is not substantially affected by various substituents attached to the 1,2,3-triazole unit, benefiting from its cross-conjugated nature. The combination of clickable synthesis, tunable photoswitch property, and self-decoupling ability makes (hetero)arylazo-1,2,3-triazoles intriguing molecular tools in developing photoresponsive systems with desired performance.

A Deformable Low-Threshold Optical Limiter with Oligothiophene-Doped Liquid Crystals

Optical limiting is a phenomenon widely recognized as the potential application for a protector of human eyes and optical sensors from irradiation with lasers. However, a high optical limiting threshold and low flexibility have restricted such applications. Here, we report that oligothiophene-doped liquid crystals (LCs) function as a low-threshold optical limiter with deformability. Irradiation of dye-doped LCs with a continuous wave (CW) laser beam brings about the formation of diffraction rings, and the number of rings changes depending on the incident light intensity due to their photoinduced molecular reorientation. Utilizing such reorientation enables reversible optical limiting without additional multilayered optical components. In particular, an electric field application to a LC-based optical limiter decreases their optical limiting threshold from 2100 to 25 mW/cm², and the threshold can be tuned by adjusting the applied voltage. Furthermore, the softness of LCs allows for the fabrication of the deformable optical limiter; optical limiting due to the molecular reorientation occurs even in largely bent states. The low-threshold and deformable optical limiter based on oligothiophene-doped LCs thus will enable one to develop the protector of eyes and optical sensors from glaring light-induced damage.

Biomolecular Binding at Aqueous Interfaces of Langmuir Monolayers of Bioconjugated Amphiphilic Mesogenic Molecules: A Molecular Dynamics Study

We report a molecular dynamics (MD) simulation study of protein binding at the aqueous-liquid crystal (LC) interfaces of bioconjugated mesogenic molecules. As a simple model of these interfaces, we use monolayers composed of biotin-conjugated or biotin-free amphiphilic mesogenic molecules and streptavidin in water. The all-atom MD simulations reveal that the binding of streptavidin to the biotin mesogenic monolayer is significantly stronger than that to biotin-free mesogenic monolayers. Although specific protein binding marginally increases the overall orientational order and the tilt of the biotin-conjugated mesogenic molecules of the monolayer, significant changes in tilt were observed near the bound protein (in contrast to the protein interaction with the monolayer without biotin). We also observe that specific protein binding changes the dynamic properties of the mesogens within the monolayer (e.g., lateral diffusion coefficients) and associated water. Overall, these MD simulations advance our understanding of the molecular-level phenomena involved in the binding of biomolecules and subsequent dynamic changes at the aqueous-LC interfaces. These results provide guidance to future molecular-level designs of biofunctional LC interfaces.

Supramolecular Chiral Nanoarchitectonics

Exploration of molecular functions and material properties based on the control of chirality would be a scientifically elegant approach. Here, the fabrication and function of chiral-featured materials from both chiral and achiral components using a supramolecular nanoarchitectonics concept are discussed. The contents are classified in to three topics: i) chiral nanoarchitectonics of rather general molecular assemblies; ii) chiral nanoarchitectonics of metal-organic frameworks (MOFs); iii) chiral nanoarchitectonics in liquid crystals. MOF structures are based on nanoscopically well-defined coordinations, while mesoscopic orientations of liquid-crystalline phases are often flexibly altered. Discussion on the effects and features in these representative materials systems with totally different natures reveals the universal importance of supramolecular chiral nanoarchitectonics. Amplification of chiral molecular information from molecules to materials-level structures and the creation of chirality from achiral components upon temporal statistic fluctuations are universal, regardless of the nature of the assemblies. These features are thus surely advantageous characteristics for a wide range of applications.

Interfacial nanoarchitectonics for responsive cellular biosystems

The living cell can be regarded as an ideal functional material system in which many functional systems are working together with high efficiency and specificity mostly under mild ambient conditions. Fabrication of living cell-like functional materials is regarded as one of the final goals of the nanoarchitectonics approach. In this short review article, material-based approaches for regulation of living cell behaviors by external stimuli are discussed. Nanoarchitectonics strategies on cell regulation by various external inputs are first exemplified. Recent approaches on cell regulation with interfacial nanoarchitectonics are also discussed in two extreme cases using a very hard interface with nanoarchitected carbon arrays and a fluidic interface of the liquid-liquid interface. Importance of interfacial nanoarchitectonics in controlling living cells by mechanical and supramolecular stimuli from the interfaces is demonstrated.

Photo-triggered large mass transport driven only by a photoresponsive surface skin layer

Since the discovery 25 years ago, many investigations have reported light-induced macroscopic mass migration of azobenzene-containing polymer films. Various mechanisms have been proposed to account for these motions. This study explores light-inert side chain liquid crystalline polymer (SCLCP) films with a photoresponsive polymer only at the free surface and reports the key effects of the topmost surface to generate surface relief gratings (SRGs) for SCLCP films. The top-coating with an azobenzene-containing SCLCP is achieved by the Langmuir-Schaefer (LS) method or surface segregation. A negligible amount of the photoresponsive skin layer can induce large SRGs upon patterned UV light irradiation. Conversely, the motion of the SRG-forming azobenzene SCLCP is impeded by the existence of a LS monolayer of the octadecyl side chain polymer on the top. These results are well understood by considering the Marangoni flow driven by the surface tension instability. This approach should pave the way toward in-situ inscription of the surface topography for light-inert materials and eliminate the strong light absorption of azobenzene, which is a drawback in optical device applications.

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

The evolution of molecular machines through interfacial nanoarchitectonics: from toys to tools

Molecular machines are often regarded as molecular artworks and sometimes as fancy molecular toys. However, many researchers strive to operate molecular machines as useful tools for realistic practical applications. In this perspective article, shifting the working environment of molecular machines from solution to interfacial media is discussed from the viewpoint of their evolution from scientific toys to useful tools. Following a short description of traditional research into molecular machines in solution and their nanotechnological manipulation on clean solid surfaces, pioneering research into molecular machine operation at dynamic interfaces, such as liquid surfaces, is discussed, along with cutting-edge research into molecular machine functions in living cells and their models. Biomolecular machines within organisms are the products of evolution over billions of years. We may nanoarchitect such sophisticated functional systems with artificial molecular machines within much shorter periods.

Don't Forget Langmuir-Blodgett Films 2020: Interfacial Nanoarchitectonics with Molecules, Materials, and Living Objects

Designing interfacial structures with nanoscale (or molecular) components is one of the important tasks in the nanoarchitectonics concept. In particular, the Langmuir-Blodgett (LB) method can become a promising and powerful strategy in interfacial nanoarchitectonics. From this viewpoint, the status of LB films in 2020 will be discussed in this feature article. After one section on the basics of interfacial nanoarchitectonics with the LB technique, various recent research examples of LB films are introduced according to classifications of (i) growing research, (ii) emerging research, and (iii) future research. In recent LB research, various materials other than traditional lipids and typical amphiphiles can be used as film components of the LB techniques. Two-dimensional materials, supramolecular structures such as metal organic frameworks, and biomaterials such as DNA origami pieces are capable of working as functional components in the LB assemblies. Possible working areas of the LB methods would cover emerging demands, including energy, environmental, and biomedical applications with a wide range of functional materials. In addition, forefront research such as molecular manipulation and cell fate control is conducted in LB-related interfacial science. The LB technique is a traditional and well-develop methodology for molecular films with a ca. 100 year history. However, there is plenty of room at the interfaces, as shown in LB research examples described in this feature article. It is hoped that the continuous development of the science and technology of the LB method make this technique an unforgettable methodology.

Recent progress in self-healable ion gels

Ion gels, soft materials that contain ionic liquids (ILs), are promising gel electrolytes for use in electrochemical devices. Due to the recent surge in demand for flexible and wearable devices, highly durable ion gels have attracted significant amounts of attention. In this review, we address recent advances in the development of ion gels that can heal themselves when mechanically damaged. Light- and thermally induced healing of ion gels are discussed as stimuli-responsive healing strategies, after which self-healable ion gels based on supramolecular and dynamic covalent chemistry are addressed. Tough, highly stretchable, and self-healable ion gels have recently been fabricated through the judicious design of polymer nanostructures in ILs in which polymer chains and IL cations and anions interact. The applications of self-healable ion gels to electrochemical devices are also briefly discussed.

Fullerene Nanoarchitectonics with Shape-Shifting

This short review article introduces several examples of self-assembly-based structural formation and shape-shifting using very simple molecular units, fullerenes (C60, C70, and their derivatives), as fullerene nanoarchitectonics. Fullerene molecules are suitable units for the basic science of self-assembly because they are simple zero-dimensional objects with only a single elemental component, carbon, without any charged or interactive functional groups. In this review article, self-assembly of fullerene molecules and their shape-shifting are introduced as fullerene nanoarchitectonics. An outline and a background of fullerene nanoarchitectonics are first described, followed by various demonstrations, including fabrication of various fullerene nanostructures, such as rods on the cube, holes in the cube, interior channels in the cube, and fullerene micro-horns, and also a demonstration of a new concept, supramolecular differentiation.

Enlightening Materials with Photoswitches

Incorporating molecular photoswitches into various materials provides unique opportunities for controlling their properties and functions with high spatiotemporal resolution using remote optical stimuli. The great and largely still untapped potential of these photoresponsive systems has not yet been fully exploited due to the fundamental challenges in harnessing geometrical and electronic changes on the molecular level to modulate macroscopic and bulk material properties. Herein, progress made during the past decade in the field of photoswitchable materials is highlighted. After pointing to some general design principles, materials with an increasing order of the integrated photoswitchable units are discussed, spanning the range from amorphous settings over surfaces/interfaces and supramolecular ensembles, to liquid crystalline and crystalline phases. Finally, some potential future directions are pointed out in the conclusion. In view of the exciting recent achievements in the field, the future emergence and further development of light-driven and optically programmable (inter)active materials and systems are eagerly anticipated.

2D Nanoarchitectonics: Soft Interfacial Media as Playgrounds for Microobjects, Molecular Machines, and Living Cells

Soft and flexible two-dimensional (2D) systems, such as liquid interfaces, would have much more potentials in dynamic regulation on nano-macro connected functions. In this Minireview article, we focus especially on dynamic motional functions at liquid dynamic interfaces as 2D material systems. Several recent examples are selected to be explained for overviewing features and importance of dynamic soft interfaces in a wide range of action systems. The exemplified research systems are mainly classified into three categories: (i) control of microobjects with motional regulations; (ii) control of molecular machines with functions of target discrimination and optical outputs; (iii) control of living cells including molecular machine functions at cell membranes and cell/biomolecular behaviors at liquid interface. Sciences on soft 2D media with motional freedom and their nanoarchitectonics constructions will have increased importance in future technology in addition to popular rigid solid 2D materials.

Self-Assembly and Photoinduced Spindle-Toroid Morphology Transition of Macromolecular Double-Brushes with Azobenzene Pendants

Asymmetric macromolecular double-brushes (MDBs) are composed of two different side chains grafted on a linear backbone, possessing distinct assembly behaviors in comparison with conventional amphiphiles, owing to the Janus architecture and combined effects of backbone and hetero double-brushes. Additionally, the introduction of unique functionalities and responsiveness into the self-assembly system of MDBs endows extra opportunities to pursue morphologic diversity and intriguing properties. Herein, we report the synthesis of Janus-like MDBs of polyacrylate-g-poly(6-(4-butyl-4'-oxyazobenzene) hexyl acrylate)/poly(ethylene oxide) (PA-g-PAzo/PEO), in which hydrophilic PEO and hydrophobic PAzo brushes were grafted using the combination of concurrent ATRP and click reaction. Due to the special Janus topology and inter/intramolecular association of pendant azobenzene groups, amphiphilic PA-g-PAzo/PEO self-assembled into multimolecular rod and spindle-like aggregates. It is interesting that a transition of spindle-toroid-spindle was observed upon the alternative irradiation between UV and visible light, which is ascribed to the trans-to-cis isomerization of azobenzene molecular brushes. To our best knowledge, this is the first time that azobenzene-containing MDBs enable the fabrication of distinctive self-assembled morphologies and photoinduced toroid formation. The controlled synthesis of MDBs with unique functionalities and subsequent development of their structure-property relationships would shed light on the design and optimization of bottlebrush-based nanomaterials.

Nanoarchitectonics from Atom to Life

Functional materials with rational organization cannot be directly created only by nanotechnology-related top-down approaches. For this purpose, a novel research paradigm next to nanotechnology has to be established to create functional materials on the basis of deep nanotechnology knowledge. This task can be assigned to an emerging concept, nanoarchitectonics. In the nanoarchitectonics approaches, functional materials were architected through combination of atom/molecular manipulation, organic chemical synthesis, self-assembly and related spontaneous processes, field-applied assembly, micro/nano fabrications, and bio-related processes. In this short review article, nanoarchitectonics-related approaches on materials fabrications and functions are exemplified from atom-scale to living creature level. Based on their features, unsolved problems for future developments of the nanoarchitectonics concept are finally discussed.

Role of Toluidine Blue-O Binding Mechanism for Photooxidation in Bioinspired Bacterial Membranes

The alarming increase in bacterial resistance to antibiotics has demanded new strategies for microbial inactivation, which include photodynamic therapy whose activity relies on the photoreaction damage to the microorganism membrane. Herein, the binding mechanisms of the photosensitizer toluidine blue-O (TBO) on simplified models of bacterial membrane with Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) were correlated to the effects of the photoinduced lipid oxidation. Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were also used as a reference of mammalian membranes. The surface pressure isotherms combined with polarization-modulated infrared reflection absorption spectroscopy revealed that TBO expands DOPC, DOPE, and DOPG monolayers owing to electrostatic interactions with the negatively charged groups in the phospholipids, with a stronger adsorption on DOPG, which has a net surface charge. Light irradiation made the TBO-containing DOPC and DOPE monolayers less unstable as a result of the singlet oxygen (¹O₂) reaction with the chain unsaturation and hydroperoxide formation. In contrast, the decreased stability of the irradiated TBO-containing DOPG monolayer suggests the cleavage of carbon chains. The anionic nature of DOPG allowed a deeper penetration of TBO into the chain region, favoring contact-dependent reactions between the excited triplet state of TBO and lipid unsaturations or/and hydroperoxide groups, which is the key for the cleavage reactions and further membrane permeabilization.

Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Precise control over molecular movement is of fundamental and practical importance in physics, biology, and chemistry. At nanoscale, the peculiar functioning principles and the synthesis of individual molecular actuators and machines has been the subject of intense investigations and debates over the past 60 years. In this review, we focus on the design of collective motions that are achieved by integrating, in space and time, several or many of these individual mechanical units together. In particular, we provide an in-depth look at the intermolecular couplings used to physically connect a number of artificial mechanically active molecular units such as photochromic molecular switches, nanomachines based on mechanical bonds, molecular rotors, and light-powered rotary motors. We highlight the various functioning principles that can lead to their collective motion at various length scales. We also emphasize how their synchronized, or desynchronized, mechanical behavior can lead to emerging functional properties and to their implementation into new active devices and materials.

Photoinduced Reversible Bending and Guest Molecule Release of Azobenzene-Containing Polydiacetylene Nanotubes

Creation of hollow, one-dimensional nanomaterials has gained great recent attention in the chemical and material sciences. In a study aimed at discovering new functional materials of this type, we observed that an amphiphilic diacetylene (DA) derivative, containing an azobenzene moiety and an oligo-ethylene group, self-assembles to form nanotubes and undergoes photopolymerization to form hollow polydiacetylene (PDA) nanotubes with a uniform wall thickness and diameter. The azobenzene-PDA nanotubes are photoresponsive in that on-and-off UV-irradiation leads to a reversible morphological change between straight and bent forms in association with E-Z photoisomerization of the azobenzene group. Owing to the UV-induced structural change feature, the new DA and PDA nanotubes serve as a controlled release material. Accordingly, fluorescent rhodamine B encapsulated inside the nanotubes are effectively released by using repeated on-off UV irradiation. Furthermore, photo-release of rhodamine B was shown to occur in an artemia (brine shrimp).

Photoinduced Reorientation in Thin Films of a Nematic Liquid Crystalline Polymer Anchored to Interfaces and Enhancement Using Small Liquid Crystalline Molecules

The photoinduced reorientation of the side-chain mesogens in nematic liquid crystalline (LC) polymer thin films triggered by the axis-selective photo-Fries rearrangements of side-chain phenyl benzoate moieties is studied to understand the regulation of the anisotropic nanostructures supported by LC polymers. The influence of the substrate surface in anchoring the side-chain mesogens near the interfaces is examined by comparing the reorientation of 30- and 120-nm-thick films. Irradiation with linearly polarized ultraviolet (UV) light and subsequent annealing causes the side-chain mesogen reorientation to align perpendicular to the electric field of the incident UV light. The inplane order in the 30-nm-thick films is lower than that in the 120-nm ones. On the other hand, the annealing period required for mesogen alignment is independent of the film thickness. It is suggested that the substrate surfaces anchor the LC mesogens to fix their orientation, rather than slowing down the reorientational motion. In addition, it is demonstrated that small LC molecules miscible with the nematic LC polymer enhance photoinduced reorientation through cooperative molecular interaction with the side-chain mesogens, remarkably accelerating the orientation and improving the inplane order of the unidirectionally aligned mesogens.

Biomimetic Locomotion of Electrically Powered "Janus" Soft Robots Using a Liquid Crystal Polymer

Oriented liquid crystal networks (LCNs) can undergo reversible shape change at the macroscopic scale upon an order-disorder phase transition of the mesogens. This property is explored for developing soft robots that can move under external stimuli, such as light in most studies. Herein, electrically driven soft robots capable of executing various types of biomimetic locomotion are reported. The soft robots are composed of a uniaxially oriented LCN strip, a laminated Kapton layer, and thin resistive wires embedded in between. Taking advantage of the combined attributes of the actuator, namely, easy processing, reprogrammability, and reversible shape shift between two 3D shapes at electric power on and off state, the concept of a "Janus" soft robot is demonstrated, which is built from a single piece of the material and has two parts undergoing opposite deformations simultaneously under a uniform stimulation. In addition to complex shape morphing such as the movement of oarfish and sophisticated devices like self-locking grippers, electrically powered "Janus" soft robots can accomplish versatile locomotion modes, including crawling on flat surfaces through body arching up and straightening down, crawling inside tubes through body stretching and contraction, walking like four-leg animals, and human-like two-leg walking while pushing a load forward.

A Bubble-Dragged Catalytic Polymer Microrocket

We report the bubble dragged microrocket consisting of functionalized multilayer polymer covered asymmetrically by platinum nanoparticles. The microrocket is pushed back during bubble growth over a small step and dragged forward over a big step during bubble explosion. Each bubble explosion induced a shock wave of gas which propagates in water at ultrafast speed. The bubble dragged microrocket can move along an approximate straight line instead of a fluctuating circle which is the trajectory of a bubble-pushed microrocket in most cases, which makes it a promising candidate for drug delivery and simulating rod-shaped bacteria.

Acceleration of photochromism and negative photochromism by the interactions with mesoporous silicas

The adsorption of merocyanine dye onto mesoporous silicas with varied pore sizes (5.5, 9.4 and 2.2 nm) from the toluene solution of 1,3,3-trimethylindolino-6'-nitrobenzopyrylospiran under UV irradiation was investigated quantitatively. The photoinduced adsorption of merocyanine onto SBA-15 with the pore diameter of 9.4 nm followed the pseudo-second order kinetics and the rate constant was larger than that observed for MCM-41 (pore size of 2.2 nm) owing to the efficient diffusion of merocyanine. The maximum adsorbed amounts of the merocyanine dye was 152 mg g-1 of SBA-15, which corresponded to the sufficiently high concentration of merocyanine in the pores (0.376 mol L-1 of pore). The resulting red-colored hybrids (SBA-15 containing merocyanine) showed decoloration in the solid-state by visible light irradiation (negative photochromism). The conversion was high (about 80% at the photostationary state) under visible light irradiation at room temperature using a solar simulator (100 W). The red color was re-generated by storing the photochemically formed colorless samples in the dark at room temperature. The half-lives of the thermal coloration process were 2.6, 1.9 and 1.3 h for the MCM-41, SBA-15s with the BJH pore sizes of 5.5 and 9.4 nm, respectively. Since the coloration was affected by the diffusion of the molecules in the pores, larger pores provided the efficient molecular diffusion, leading to faster reactions.

Layer-by-Layer Assembly: Recent Progress from Layered Assemblies to Layered Nanoarchitectonics

As an emerging concept for the development of new materials with nanoscale features, nanoarchitectonics has received significant recent attention. Among the various approaches that have been developed in this area, the fixed-direction construction of functional materials, such as layered fabrication, offers a helpful starting point to demonstrate the huge potential of nanoarchitectonics. In particular, the combination of nanoarchitectonics with layer-by-layer (LbL) assembly and a large degree of freedom in component availability and technical applicability would offer significant benefits to the fabrication of functional materials. In this Minireview, recent progress in LbL assembly is briefly summarized. After introducing the basics of LbL assembly, recent advances in LbL research are discussed, categorized according to physical, chemical, and biological innovations, along with the fabrication of hierarchical structures. Examples of LbL assemblies with graphene oxide are also described to demonstrate the broad applicability of LbL assembly, even with a fixed material.