Modification of Visible-Light-Responsive Pb2Ti2O5.4F1.2 with Metal Oxide Cocatalysts to Improve Photocatalytic O2 Evolution toward Z-Scheme Overall Water Splitting

The development of a highly active photocatalyst for visible-light water splitting requires a high-quality semiconductor material and a cocatalyst, which promote both the migration of photogenerated charge carriers and surface redox reactions. In this work, a cocatalyst was loaded onto an oxyfluoride photocatalyst, Pb2Ti2O5.4F1.2, to improve the water oxidation activity. Among the metal oxides examined as cocatalysts, RuO2 was found to be the most suitable, and the O2 evolution activity depended on the preparation conditions for Ru/Pb2Ti2O5.4F1.2. The highest activity was obtained with RuCl3-impregnated Pb2Ti2O5.4F1.2 heated under a flow of H2 at 523 K. The H2-treated Ru/Pb2Ti2O5.4F1.2 showed an O2 evolution rate an order of magnitude higher than those for the analogues without the H2 treatment (e. g., RuO2/Pb2Ti2O5.4F1.2). Physicochemical analyses by X-ray absorption fine-structure spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and time-resolved microwave conductivity measurements indicated that the optimized photocatalyst contained partially reduced RuO2 species with a particle size of ~5 nm. These partially reduced species effectively trapped the photogenerated charge carriers and promoted the oxidation of water into O2. The optimized Ru/Pb2Ti2O5.4F1.2 could function as an O2-evolving photocatalyst in Z-scheme overall water splitting, in combination with an Ru-loaded, Rh-doped SrTiO3 photocatalyst.

Hydrothermally Synthesized ZnCr- and NiCr-Layered Double Hydroxides as Hydrogen Evolution Photocatalysts

The layered double hydroxides (LDHs) of transition metals are of great interest as building blocks for the creation of composite photocatalytic materials for hydrogen production, environmental remediation and other applications. However, the synthesis of most LDHs is reported only by the conventional coprecipitation method, which makes it difficult to control the catalyst's crystallinity. In the present study, ZnCr- and NiCr-LDHs have been successfully prepared using a facile hydrothermal approach. Varying the hydrothermal synthesis conditions allowed us to obtain target products with a controllable crystallite size in the range of 2-26 nm and a specific surface area of 45-83 m2∙g-1. The LDHs synthesized were investigated as photocatalysts of hydrogen generation from aqueous methanol. It was revealed that the photocatalytic activity of ZnCr-LDH samples grows monotonically with the increase in their average crystallite size, while that of NiCr-LDH ones reaches a maximum with intermediate-sized crystallites and then decreases due to the specific surface area reduction. The concentration dependence of the hydrogen evolution activity is generally consistent with the standard Langmuir-Hinshelwood model for heterogeneous catalysis. At a methanol content of 50 mol. %, the rate of hydrogen generation over ZnCr- and NiCr-LDHs reaches 88 and 41 μmol∙h-1∙g-1, respectively. The hydrothermally synthesized LDHs with enhanced crystallinity may be of interest for further fabrication of their nanosheets being promising components of new composite photocatalysts.

Recent advances in catalytic oxidation of VOCs by two-dimensional ultra-thin nanomaterials

Catalytic oxidation, an end-of-pipe treatment technology for effectively purifying volatile organic compounds (VOCs), has received widespread attention. The crux of catalytic oxidation lies in the development of efficient catalysts, with their optimization necessitating a comprehensive analysis of the catalytic reaction mechanism. Two-dimensional (2D) ultra-thin nanomaterials offer significant advantages in exploring the catalytic oxidation mechanism of VOCs due to their unique structure and properties. This review classifies strategies for regulating catalytic properties and typical applications of 2D materials in VOCs catalytic oxidation, in addition to their characteristics and typical characterization techniques. Furthermore, the possible reaction mechanism of 2D Co-based and Mn-based oxides in the catalytic oxidation of VOCs is analyzed, with a special focus on the synergistic effect between oxygen and metal vacancies. The objective of this review is to provide valuable references for scholars in the field.

Z-scheme WOx/Cu-g-C3N4 heterojunction nanoarchitectonics with promoted charge separation and transfer towards efficient full solar-spectrum photocatalysis

Construction of Z-scheme heterojunctions has been considered one superb method in promoting solar-assisted charge carrier separation of carbon-based materials to achieve efficient utilization of solar energy in hydrogen production and CO₂ reduction. One interesting concept in nanofabrication that has become trend recent years is nanoarchitectonics. A heterostructure photocatalyst constructed based on the idea of nanoarchitectonics using the combination of g-C₃N₄, metal and an additional semiconducting nanocomposite is investigated in this paper. Z-scheme tungsten oxide incorporated copper modified graphitic carbon nitride (WO_x/Cu-g-C₃N₄) heterostructures are fabricated via immobilization of WO_x on Cu nanoparticles modified superior thin g-C₃N₄ nanosheets. Mechano-chemical pre-reaction and a two-step high-temperature thermal polymerization process are the keys in attaining homogeneous distribution of Cu nanoparticles in g-C₃N₄ nanosheets. The horizontal growth of homogeneously distributed WO_x nanobelts on Cu modified g-C₃N₄ (Cu-g-C₃N₄) base via solvothermal synthesis is achieved. The photocatalytic performances of the heterostructures are evaluated through water splitting and CO₂ photoreduction measurements in full solar spectrum irradiation condition. The presence of Cu nanoparticles in the composite system improves charge transport between g-C₃N₄ and WO_x and thus enhances the photocatalytic performances (H₂ generation and CO₂ photoreduction) of the composite material, while the presence of WO_x nanocomposites enhances light absorption of the composite material in the near infrared range. The synthesized heterostructure with optimized WO_x to Cu-g-C₃N₄ ratio and in case of no co-catalyst addition exhibits enhanced photocatalytic H₂ evolution (4560 μmolg^-1h^-1) as well as excellent CO₂ reduction rate (5.89 μmolg^-1h^-1 for CO generation).

Enhanced Photocatalytic Properties of Restacked Unilamellar [SrTa2O7]2- Nanosheets of Aurivillius Phase Layered Perovskites

In the present work, unilamellar [SrTa₂O₇]^2- perovskite nanosheets with variable lateral dimensions were synthesized via a high-yield, three-step liquid exfoliation route from layered Bi₂SrTa₂O₉. The photocatalytic activity of the parent and exfoliated layered perovskites was evaluated for the photocatalytic dye degradation of Rhodamine B under UV light (254 nm) and reduction of water to H₂ under the full solar spectrum. A comparative study of the photocatalytic behavior of unilamellar [SrTa₂O₇]^2- perovskite nanosheets and parent layered structure showed a significant improvement in both hydrogen evolution (98.20 vs 3 μmol g^-1) and Rhodamine B degradation time (180 vs 30 min), with the restacked nanosheets. The exfoliation of layered perovskites not only increases their specific surface area, providing more active sites, but also reduces the recombination probability of electrons and holes due to their unilamellar structure and reduced charge transport pathways. The synthesis and preparation of strong acid solids such as [SrTa₂O₇]^2- perovskite nanosheets can be a promising approach for effective adsorption of pollutants with cationic nature and more efficient electron transfer between the dye and catalyst. Finally, the photocatalytic characteristics of the restacked unilamellar [SrTa₂O₇]^2- nanosheets remained unchanged after three successive cycles of recycling-reusing.

Two-dimensional heterostructures for photocatalytic CO2 reduction

The photocatalysis conversion of CO₂ into fuels has become an encouraging method to address climate and energy issues as a long-term solution. Single material suffers poor yield due to low light energy utilization and high recombination rate of photoinduced electron-hole pairs. It is an efficient approach to construct heterojunction through two or three materials to improve the photocatalytic performance. Recently, 2D-based heterojunction is getting popular for outstanding properties, such as special light collecting structure to enhance light harvest, intimate interface to facilitate charge transfer and separation, and large specific surface area to provide abundant reactive sites. Recently, some new 2D-based heterostructures materials (both structure and composition) have been developed with excellent performance. 2D materials exert structural and functional advantages in these fine composite photocatalysts. In this review, the literatures about the photocatalytic conversion of CO₂ are mainly summarized based on overall structure, interface type and material type of 2D-based heterojunction, with special attention given to the preparation, characterization, structural advantages and reaction mechanism of novel 2D-based heterojunction. This work is in hope of offering a basis for designing improved composite photocatalyst for CO₂ photoreduction.

Platinum@Hexaniobate Nanopeapods: A Directed Photocatalytic Architecture for Dye-Sensitized Semiconductor H2 Production under Visible Light Irradiation

Platinum@hexaniobate nanopeapods (Pt@HNB NPPs) are a nanocomposite photocatalyst that was selectively engineered to increase the efficiency of hydrogen production from visible light photolysis. Pt@HNB NPPs consist of linear arrays of high surface area Pt nanocubes encapsulated within scrolled sheets of the semiconductor H _x K_4-x Nb₆O₁₇ and were synthesized in high yield via a facile one-pot microwave heating method that is fast, reproducible, and more easily scalable than multi-step approaches required by many other state-of-the-art catalysts. The Pt@HNB NPPs' unique 3D architecture enables physical separation of the Pt catalysts from competing surface reactions, promoting electron efficient delivery to the isolated reduction environment along directed charge transport pathways that kinetically prohibit recombination reactions. Pt@HNB NPPs' catalytic activity was assessed in direct comparison to representative state-of-the-art Pt/semiconductor nanocomposites (extPt-HNB NScs) and unsupported Pt nanocubes. Photolysis under similar conditions exhibited superior H₂ production by the Pt@HNB NPPs, which exceeded other catalyst H₂ yields (μmol) by a factor of 10. Turnover number and apparent quantum yield values showed similar dramatic increases over the other catalysts. Overall, the results clearly demonstrate that Pt@HNB NPPs represent a unique, intricate nanoarchitecture among state-of-the-art heterogeneous catalysts, offering obvious benefits as a new architectural pathway toward efficient, versatile, and scalable hydrogen energy production. Potential factors behind the Pt@HNB NPPs' superior performance are discussed below, as are the impacts of systematic variation of photolysis parameters and the use of a non-aqueous reductive quenching photosystem.

Surface-modified, dye-sensitized niobate nanosheets enabling an efficient solar-driven Z-scheme for overall water splitting

While dye-sensitized metal oxides are good candidates as H₂ evolution photocatalysts for solar-driven Z-scheme water splitting, their solar-to-hydrogen (STH) energy conversion efficiencies remain low because of uncontrolled charge recombination reactions. Here, we show that modification of Ru dye-sensitized, Pt-intercalated HCa₂Nb₃O₁₀ nanosheets (Ru/Pt/HCa₂Nb₃O₁₀) with both amorphous Al₂O₃ and poly(styrenesulfonate) (PSS) improves the STH efficiency of Z-scheme overall water splitting by a factor of ~100, when the nanosheets are used in combination with a WO₃-based O₂ evolution photocatalyst and an I₃^-/I^- redox mediator, relative to an analogous system that uses unmodified Ru/Pt/HCa₂Nb₃O₁₀. By using the optimized photocatalyst, PSS/Ru/Al₂O₃/Pt/HCa₂Nb₃O₁₀, a maximum STH of 0.12% and an apparent quantum yield of 4.1% at 420 nm were obtained, by far the highest among dye-sensitized water splitting systems and comparable to conventional semiconductor-based suspended particulate photocatalyst systems.

Photocatalytic Hydrogen Production from Aqueous Solutions of Glucose and Xylose over Layered Perovskite-like Oxides HCa2Nb3O10, H2La2Ti3O10 and Their Inorganic-Organic Derivatives

Nowadays, the efficient conversion of plant biomass components (alcohols, carbohydrates, etc.) into more energy-intensive fuels, such as hydrogen, is one of the urgent scientific and technological problems. The present study is the first one focused on the photoinduced hydrogen evolution from aqueous D-glucose and D-xylose using layered perovskite-like oxides HCa₂Nb₃O₁₀, H₂La₂Ti₃O₁₀, and their organically modified derivatives that have previously proven themselves as highly active photocatalysts. The photocatalytic performance was investigated for the bare compounds and products of their surface modification with a 1 mass. % Pt cocatalyst. The photocatalytic experiments followed an innovative scheme including dark stages as well as the control of the reaction suspension's pH and composition. The study has revealed that the inorganic-organic derivatives of the layered perovskite-like oxides can provide efficient conversion of carbohydrates into hydrogen fuel, being up to 8.3 times more active than the unmodified materials and reaching apparent quantum efficiency of 8.8%. Based on new and previously obtained data, it was shown that the oxides' interlayer space functions as an additional reaction zone in the photocatalytic hydrogen production and the contribution of this zone to the overall activity is dependent on the steric characteristics of the sacrificial agent used.

Structure, Stability, and Photocatalytic Activity of a Layered Perovskite Niobate after Flux-Mediated Sn(II) Exchange

A new strategy to incorporate the Sn(II) cation and its stereoactive lone pair into the structure of a photocatalytic oxide has been achieved by leveraging the asymmetric coordination environments within the (111)-oriented perovskite-type layers of Ba₅Nb₄O₁₅. This layered perovskite represents one of the few known photocatalysts capable of efficiently splitting water, but its activity is restricted to ultraviolet radiation owing to its large band gap. By reacting this layered niobate at 350 °C for 24 h within a low-melting SnCl₂/SnF₂ salt, the new (Ba_1-xSn_x)Nb₄O₁₅ (x = 0-0.5; P3̅m1; a = 5.79650(5) Å, c = 11.79288(8) Å; Z = 2) has been prepared in high purity with up to ∼50% Sn(II) cations. Statistical disordering of the Sn(II) cations was probed by neutron diffraction Rietveld refinements and found to occur predominantly over the asymmetric cation sites, Ba2 and Ba3, for the 40% Sn(II) composition of x = 0.4. An increasing Sn(II) amount significantly red-shifts the band gap (E_g) from 0% Sn for x = 0 (3.78 eV; ultraviolet, indirect) to 40% Sn for x = 0.4 (E_g = 2.35 eV; visible, indirect), as found by UV-vis diffuse reflectance. Density functional theory calculations show an increasing metastability, i.e., a thermodynamic instability toward decomposition to the simpler oxides SnO, Nb₂O₅, and SnNb₂O₆. A synthetic limit of ∼50% Sn(II) cations can be kinetically stabilized under these reaction conditions. For the highest Sn(II) amounts, photocatalytic rates are observed for the production of molecular oxygen from water of up to ∼77 μmol O₂ h^-1 g^-1 (visible irradiation) and ∼159 μmol O₂ h^-1 g^-1 (UV-vis irradiation), with apparent quantum yields of ∼0.35 and 0.52%, respectively. By comparison, pure Ba₅Nb₄O₁₅ exhibits no measurable photocatalytic activity under visible-light irradiation. Electronic structure calculations show that the decreased band gap stems from the introduction of the Sn(II) cations and the formation of a higher-energy valence band arising from the filled 5s² valence orbitals. Thus, visible-light bandgap excitation occurs from electronic transitions predominantly involving the Sn(II) (5s²) to Nb(V) (4d⁰) cations. This study demonstrates the new and powerful utility of low-temperature Sn(II)-exchange reactions to sensitize layer-type oxide photocatalysts to the visible region of the solar spectrum, which is facilitated by exploiting their asymmetric cation environments.

Material Evolution with Nanotechnology, Nanoarchitectonics, and Materials Informatics: What will be the Next Paradigm Shift in Nanoporous Materials?

Materials science and chemistry have played a central and significant role in advancing society. With the shift toward sustainable living, it is anticipated that the development of functional materials will continue to be vital for sustaining life on our planet. In the recent decades, rapid progress has been made in materials science and chemistry owing to the advances in experimental, analytical, and computational methods, thereby producing several novel and useful materials. However, most problems in material development are highly complex. Here, the best strategy for the development of functional materials via the implementation of three key concepts is discussed: nanotechnology as a game changer, nanoarchitectonics as an integrator, and materials informatics as a super-accelerator. Discussions from conceptual viewpoints and example recent developments, chiefly focused on nanoporous materials, are presented. It is anticipated that coupling these three strategies together will open advanced routes for the swift design and exploratory search of functional materials truly useful for solving real-world problems. These novel strategies will result in the evolution of nanoporous functional materials.

Development and Functionalization of Visible-Light-Driven Water-Splitting Photocatalysts

With global warming and the depletion of fossil resources, our fossil fuel-dependent society is expected to shift to one that instead uses hydrogen (H2) as a clean and renewable energy. To realize this, the photocatalytic water-splitting reaction, which produces H2 from water and solar energy through photocatalysis, has attracted much attention. However, for practical use, the functionality of water-splitting photocatalysts must be further improved to efficiently absorb visible (Vis) light, which accounts for the majority of sunlight. Considering the mechanism of water-splitting photocatalysis, researchers in the various fields must be employed in this type of study to achieve this. However, for researchers in fields other than catalytic chemistry, ceramic (semiconductor) materials chemistry, and electrochemistry to participate in this field, new reviews that summarize previous reports on water-splitting photocatalysis seem to be needed. Therefore, in this review, we summarize recent studies on the development and functionalization of Vis-light-driven water-splitting photocatalysts. Through this summary, we aim to share current technology and future challenges with readers in the various fields and help expedite the practical application of Vis-light-driven water-splitting photocatalysts.

There is still plenty of room for layer-by-layer assembly for constructing nanoarchitectonics-based materials and devices

Nanoarchitectonics approaches can produce functional materials from tiny units through combination of various processes including atom/molecular manipulation, chemical conversion, self-assembly/self-organization, microfabrication, and bio-inspired procedures. Existing fabrication approaches can be regarded as fitting into the same concept. In particular, the so-called layer-by-layer (LbL) assembly method has huge potential for preparing applicable materials with a great variety of assembling mechanisms. LbL assembly is a multistep process where different components can be organized in planned sequences while simple alignment options provide access to superstructures, for example helical structures, and anisotropies which are important aspects of nanoarchitectonics. In this article, newly-featured examples are extracted from the literature on LbL assembly discussing trends for composite functional materials according to (i) principles and techniques, (ii) composite materials, and (iii) applications. We present our opinion on the present trends, and the prospects of LbL assembly. While this method has already reached a certain maturity, there is still plenty of room for expanding its usefulness for the fabrication of nanoarchitectonics-based materials and devices.

Effect of layers on the photocatalytic hydrogen evolution in Dion-Jacobson layered-tantalum perovskites

Tantalum-based layered perovskites have always been an interesting topic in photocatalysis, but limited information has been reported in terms of their layer factor. In this work, we have synthesized Dion-Jacobson layered perovskites (A'[A_n-1Ta_nO_3n+1]) of LaTaO₄, KLaTa₂O₇, and KCa₂Ta₃O₁₀ with n = 1, 2, and 3, respectively. With the modification of 1 wt% Pt co-catalysts, the photocatalytic analysis showed that the performance order of these layered perovskites with different layers is KLaTa₂O₇ (n = 2) > KCa₂Ta₃O₁₀ (n = 3) ≫ LaTaO₄ (n = 1) with both methanol and NaI as the sacrificial agents. This suggested the importance of interlayer K⁺ for high photocatalytic performance. We further analyzed the layered perovskites in detail by BET, photoelectrochemical analysis, Mott-Schottky, and VB-XPS test. The combined results indicated that the positions of the conduction band are the dominant factors for the photocatalytic performance of tantalum-based Dion-Jacobson layered perovskites with n = 2 and 3. This work sheds new light on the field of layered perovskites as efficient photocatalysts.

Recycling Polymeric Solid Wastes for Energy-Efficient Water Purification, Organic Distillation, and Oil Spill Cleanup

Conventional approaches (e.g., pyrolysis) for managing waste polymer foams typically require highly technical skills and consume large amounts of energy resources. This paper presents an ultrafacile, cost-effective, and highly efficient alternative method for recycling waste packaging and cleaning foam (e.g., polymelamine-formaldehyde foam). The designed solar absorber, a polypyrrole-coated melamine foam (PMF), features a highly porous structure, excellent mechanical strength, low thermal conductivity, and rapid water transport capacity. These exceptional properties render the PMF suitable for multiple applications, including energy-efficient solar-powered water purification, ethanol distillation, and oil absorption. In water purification, the PMF yields a solar-thermal conversion efficiency as high as 87.7%, stability that is maintained for more than 35 operation cycles, and antifouling capabilities (when purifying different water types). In solar distillation, the PMF achieves a concentration increase up to 75 vol% when distilling a 10 vol% ethanol solution. In oil absorption, the PMF offers an oil-absorption capacity of ≈70 g g^-1 with only a 7% loss in capacity after 100 absorbing-squeezing cycles. Thus, systems combining solar energy with various waste foams are highly promising as durable, renewable, and portable systems for water purification, organic distillation, and oil absorption, especially in remote regions or emergency situations.

Photocatalytic Activity of n-Alkylamine and n-Alkoxy Derivatives of Layered Perovskite-like Titanates H2Ln2Ti3O10 (Ln = La, Nd) in the Reaction of Hydrogen Production from an Aqueous Solution of Methanol

Two series of hybrid inorganic-organic derivatives, obtained via the modification of protonated Ruddlesden–Popper phases H2Ln2Ti3O10 (Ln = La, Nd) with intercalated n-alkylamines and grafted n-alkoxy groups, have been systematically investigated in relation to photocatalytic hydrogen production from a model of 1 mol % aqueous solution of methanol for the first time. Photocatalytic measurements were performed both for bare samples and for their composites with Pt nanoparticles as a cocatalyst using an advanced scheme, including dark stages, monitoring of the volume concentration of the sample in the reaction suspension during the experiment, shifts of its pH and possible exfoliation of layered compounds into nanolayers. It was found that the incorporation of organic components into the interlayer space of the titanates increases their photocatalytic activity up to 117 times compared with that of the initial compounds. Additional platinization of the hybrid samples’ surface allowed for achieving apparent quantum efficiency of hydrogen evolution of more than 40%. It was established that the photocatalytic activity of the hybrid samples correlates with the hydration degree of their interlayer space, which is considered a separate reaction zone in photocatalysis, and that hydrogen indeed generates from the aqueous methanol solution rather than from organic components of the derivatives.

Nanoarchitectonics for Hierarchical Fullerene Nanomaterials

Nanoarchitectonics is a universal concept to fabricate functional materials from nanoscale building units. Based on this concept, fabrications of functional materials with hierarchical structural motifs from simple nano units of fullerenes (C60 and C70 molecules) are described in this review article. Because fullerenes can be regarded as simple and fundamental building blocks with mono-elemental and zero-dimensional natures, these demonstrations for hierarchical functional structures impress the high capability of the nanoarchitectonics approaches. In fact, various hierarchical structures such as cubes with nanorods, hole-in-cube assemblies, face-selectively etched assemblies, and microstructures with mesoporous frameworks are fabricated by easy fabrication protocols. The fabricated fullerene assemblies have been used for various applications including volatile organic compound sensing, microparticle catching, supercapacitors, and photoluminescence systems.

Photosystem II-based biomimetic assembly for enhanced photosynthesis

Photosystem II (PSII) is a fascinating photosynthesis-involved enzyme, participating in sunlight-harvest, water splitting, oxygen release, and proton/electron generation and transfer. Scientists have been inspired to couple PSII with synthetic hierarchical structures via biomimetic assembly, facilitating attainment of natural photosynthesis processes, such as photocatalytic water splitting, electron transfer and ATP synthesis, in vivo. In the past decade, there has been significant progress in PSII-based biomimetic systems, such as artificial chloroplasts and photoelectrochemical cells. The biomimetic assembly approach helps PSII gather functions and properties from synthetic materials, resulting in a complex with partly natural and partly synthetic components. PSII-based biomimetic assembly offers opportunities to forward semi-biohybrid research and synchronously inspire optimization of artificial light-harvest micro/nanodevices. This review summarizes recent studies on how PSII combines with artificial structures via molecular assembly and highlights PSII-based semi-natural biosystems which arise from synthetic parts and natural components. Moreover, we discuss the challenges and remaining problems for PSII-based systems and the outlook for their development and applications. We believe this topic provides inspiration for rational designs to develop biomimetic PSII-based semi-natural devices and further reveal the secrets of energy conversion within natural photosynthesis from the molecular level.

Zero-to-Two Nanoarchitectonics: Fabrication of Two-Dimensional Materials from Zero-Dimensional Fullerene

Nanoarchitectonics of two-dimensional materials from zero-dimensional fullerenes is mainly introduced in this short review. Fullerenes are simple objects with mono-elemental (carbon) composition and zero-dimensional structure. However, fullerenes and their derivatives can create various types of two-dimensional materials. The exemplified approaches demonstrated fabrications of various two-dimensional materials including size-tunable hexagonal fullerene nanosheet, two-dimensional fullerene nano-mesh, van der Waals two-dimensional fullerene solid, fullerene/ferrocene hybrid hexagonal nanosheet, fullerene/cobalt porphyrin hybrid nanosheet, two-dimensional fullerene array in the supramolecular template, two-dimensional van der Waals supramolecular framework, supramolecular fullerene liquid crystal, frustrated layered self-assembly from two-dimensional nanosheet, and hierarchical zero-to-one-to-two dimensional fullerene assembly for cell culture.

Synthesis of n-Alkoxy Derivatives of Layered Perovskite-Like Niobate HCa2Nb3O10 and Study of Their Photocatalytic Activity for Hydrogen Production from an Aqueous Solution of Methanol

A series of hybrid inorganic–organic niobates HCa2Nb3O10×ROH, containing n-alkoxy groups of primary alcohols (R = Me, Et, Pr, Bu, Hx, and Dc) grafted in the interlayer space, has been studied for the first time in relation to photocatalytic hydrogen generation from a model 1 mol % aqueous solution of methanol under ultraviolet irradiation. Photocatalytic activity was measured both for bare samples and for their composites with Pt nanoparticles as a cocatalyst. The advanced measurement scheme allowed monitoring the volume concentration of a sample in a suspension during the experiment, its pH, and possible exfoliation of layered compounds into nanolayers. In the series of n-alkoxy derivatives, the maximum rate of hydrogen evolution was achieved over a Pt-loaded ethoxy derivative HCa2Nb3O10×EtOH/Pt. Its apparent quantum efficiency of 20.6% in the 220–350 nm range was found not to be caused by changes in the light absorption region or specific surface area upon ethanol grafting. Moreover, the amounts of hydrogen released during the measurements significantly exceeded those of interlayer organic components, indicating that hydrogen is generated from the reaction solution rather than from the hybrid material.

A bifunctional lead-iron oxyfluoride, PbFeO2F, that functions as a visible-light-responsive photoanode and an electrocatalyst for water oxidation

The oxyfluoride PbFeO₂F was investigated as a photoanode material and as an electrocatalyst for water oxidation. PbFeO₂F powder, which was synthesized by a high-pressure method and had an estimated bandgap of 2.1 eV, was deposited onto a fluorine-doped tin oxide (FTO) substrate. Mott–Schottky plot measurements for the PbFeO₂F/FTO electrode showed n-type semiconductivity of PbFeO₂F, with a flat-band potential of +0.53 ± 0.05 V vs. reversible hydrogen electrode (RHE). The PbFeO₂F/FTO electrode, which was modified with a conductive TiO₂ layer and a cobalt phosphate water-oxidation cocatalyst, showed a clear anodic photocurrent in aqueous K₃PO₄ solution under visible-light irradiation (λ < 600 nm). The PbFeO₂F/FTO electrode without any modification functioned as a stable water-oxidation electrocatalyst to form O₂ with a faradaic efficiency of close to unity. This study demonstrates that PbFeO₂F is a bifunctional material, serving as a water-oxidation photoanode under a wide range of visible-light wavelengths and as an electrocatalyst that operates at a relatively low overpotential for water oxidation.

The PbFeO₂F serves as a bifunctional material for a water-oxidation photoanode workable under a wide range of visible light and a water-oxidation electrocatalyst operatable at a relatively low overpotential.

MoS2-2xSe2x Nanosheets Grown on Hollow Carbon Spheres for Enhanced Electrochemical Activity

Electrochemical catalysts with high conductivity and low reaction potential are respected. In this paper, hollow carbon spheres (HCSs) were homogeneously coated with Se-doped MoS₂ (MoS_2-2xSe_2x) nanosheets by hydrothermal synthesis. The HCSs reduced the agglomeration of MoS_2-2xSe_2x nanosheets and improved their conductivity. Compared with the MoS₂-modified samples, Se doping increased the interlayer spacing which provided more active catalytic sites and improved the charge transfer. Thus, MoS_2-2xSe_2x-decorated samples revealed enhanced electrocatalytic activity. The composition of MoS_2-2xSe_2x nanosheets was adjusted by changing the ratios of sulfur and selenium precursors. In the case of a Se/S molar ratio of 0.1, the composite of HCS decorated with MoS_2-2xSe_2x nanosheets (C@MoS_2-2xSe_2x) revealed the lowest overpotential and the smallest Tafel slope.

Electrically Induced Alignment of Semiconductor Nanosheets in Niobate-Clay Binary Nanosheet Colloids toward Significantly Enhanced Photocatalysis

Aqueous binary colloids of niobate and clay nanosheets, prepared by the exfoliation of their mother layered crystals, are unique colloidal systems characterized by the separation of niobate and clay nanosheet phases, where niobate nanosheets form liquid crystalline domains with the size of several tens of micrometers among isotropically dispersed clay nanosheets. The binary colloids show unusual photocatalytic reactions because of the spatial separation of photocatalytically active niobate and photochemically inert clay nanosheets. The present study shows structural conversion of the binary colloids with an external electric field, resulting in the onsite alignment of colloidal nanosheets to improve the photocatalytic performance of the system. The colloidal structure is reshaped by the growth of liquid crystalline domains of photocatalytic niobate nanosheets and by their electric alignment. Niobate nanosheets are assembled by the domain growth process and then aligned by AC voltage, although clay nanosheets do not respond to the electric field. Photocatalytic decomposition of the cationic rhodamine 6G dye, which is selectively adsorbed on clay nanosheets, is examined for the niobate-clay binary nanosheet colloids with or without domain growth and electric field. The fastest decomposition is observed for the electrically aligned colloid without the domain growth, whereas the sample with the domain growth and without the electric alignment shows the slowest decomposition. The results demonstrate the improvement of the photocatalytic performance by changing the colloidal structure, even though the sample composition is the same.

Nanoarchitectonics on living cells

In this review article, the recent examples of nanoarchitectonics on living cells are briefly explained. Not limited to conventional polymers, functional polymers, biomaterials, nanotubes, nanoparticles (conventional and magnetic ones), various inorganic substances, metal-organic frameworks (MOFs), and other advanced materials have been used as components for nanoarchitectonic decorations for living cells. Despite these artificial processes, the cells can remain active or remain in hibernation without being killed. In most cases, basic functions of the cells are preserved and their resistances against external assaults are much enhanced. The possibilities of nanoarchitectonics on living cells would be high, equal to functional modifications with conventional materials. Living cells can be regarded as highly functionalized objects and have indispensable contributions to future materials nanoarchitectonics.

Nanoarchitectonics: what's coming next after nanotechnology?

In science and technology today, the crucial importance of the regulation of nanoscale objects and structures is well recognized. The production of functional material systems using nanoscale units can be achieved via the fusion of nanotechnology with the other research disciplines. This task is a part of the emerging concept of nanoarchitectonics, which is a concept moving beyond the area of nanotechnology. The concept of nanoarchitectonics is supposed to involve the architecting of functional materials using nanoscale units based on the principles of nanotechnology. In this focus article, the essences of nanotechnology and nanoarchitectonics are first explained, together with their historical backgrounds. Then, several examples of material production based on the concept of nanoarchitectonics are introduced via several approaches: (i) from atomic switches to neuromorphic networks; (ii) from atomic nanostructure control to environmental and energy applications; (iii) from interfacial processes to devices; and (iv) from biomolecular assemblies to life science. Finally, perspectives relating to the final goals of the nanoarchitectonics approach are discussed.

Progress in Molecular Nanoarchitectonics and Materials Nanoarchitectonics

Although various synthetic methodologies including organic synthesis, polymer chemistry, and materials science are the main contributors to the production of functional materials, the importance of regulation of nanoscale structures for better performance has become clear with recent science and technology developments. Therefore, a new research paradigm to produce functional material systems from nanoscale units has to be created as an advancement of nanoscale science. This task is assigned to an emerging concept, nanoarchitectonics, which aims to produce functional materials and functional structures from nanoscale unit components. This can be done through combining nanotechnology with the other research fields such as organic chemistry, supramolecular chemistry, materials science, and bio-related science. In this review article, the basic-level of nanoarchitectonics is first presented with atom/molecular-level structure formations and conversions from molecular units to functional materials. Then, two typical application-oriented nanoarchitectonics efforts in energy-oriented applications and bio-related applications are discussed. Finally, future directions of the molecular and materials nanoarchitectonics concepts for advancement of functional nanomaterials are briefly discussed.

When graphene meets ionic liquids: a good match for the design of functional materials

Graphene is an attractive material that is characterized by its exceptional properties (i.e. electrical, mechanical, thermal, optical, etc.), which have pushed researchers to attach high interest to its production and functionalization processes to meet applications in different fields (electronics, electromagnetics, composites, sensors, energy storage, etc.). The synthesis (bottom-up) of graphene remains long and laborious, at the same time expensive, and it is limited to the development of this material in low yield. Hence, the use of graphite as a starting material (top-down through exfoliation or oxidation) seems a promising and easy technique for producing a large quantity of graphene or graphene oxide (GO). On the one hand, GO has been extensively studied due to its ease of synthesis, processing and chemical post-functionalization. One the other hand, "pristine" graphene sheets, obtained through exfoliation, are limited in processability but present enhanced electronic properties. Both types of materials have been of great interest to design functional nanomaterials. Ionic liquids (ILs) are task-specific solvents that exhibit tunable physico-chemical properties. ILs have many advantages as compared with conventional solvents, such as high thermal and chemical stability, low volatility, excellent conductivity and inherent polarity. In the last decade, ILs have been widely employed for the preparation and stabilization of various nanomaterials. In particular, the combination of ILs and graphene, including GO and pristine graphene sheets, has been of growing interest for the preparation, processing and functionalization of hybrid nanomaterials. Understanding the structure and properties of the graphene/IL interface has been of considerable interest for a large panel of applications ranging from tribology to energy storage.

Functional thiophene-diketopyrrolopyrrole-based polymer derivatives as organic anode materials for lithium-ion batteries

In this study, four thiophene-diketopyrrolopyrrole-based (TDPP-based) polymer derivatives modified by different groups and alkyl chains were synthesized. The effects of various functional groups on the electrochemical properties of the polymers for application in lithium-ion batteries were compared, where the carbazole (C) and tert-butyl acetate (TA) groups improved the capacity performance of the polymer electrodes, while hexane (H) and fluorene (F) groups enhanced the cycle stability of the polymer electrodes. The P(C-TDPP-TA) polymer electrode, i.e., the TDPP-based polymer composed of carbazole and tert-butyl acetate groups, exhibited the best capacity performance among the four polymer electrodes, where its discharge specific capacity and capacity retention were up to 357 mA h g-1 and 82% and its energy density and power density were 213 W h kg-1 and 149 W kg-1 at 100 mA g-1 after 500 cycles, respectively. The P(F-TDPP-H) polymer electrode, i.e., the TDPP-based polymer composed of fluorene and hexane groups, possessed the best cycle stability and conductivity, where its capacity retention was up to 92% at 100 mA g-1 for 500 cycles and its electronic conductivity and ionic conductivity were 4.80 × 10-3 and 6.68 × 10-3 S m-1, respectively. For application in lithium-ion batteries, the P(C-TDPP-TA) electrode exhibited the best comprehensive performance. When the current density reached up to 1000 mA g-1, after 1000 cycles, the P(C-TDPP-TA) electrode still exhibited a high discharge specific capacity (203.6 mA h g-1) and excellent capacity retention (88.8%), and its energy density and power density were 116 W h kg-1 and 376 W kg-1 (1000 mA g-1, after 1000 cycles), respectively. Therefore, the P(C-TDPP-TA) electrode has potential as a promising anode material for lithium-ion batteries.

Ni/Co phosphide nanoparticles embedded in N/P-doped carbon nanofibers towards enhanced hydrogen evolution

Transition-metal phosphides have been identified as effective materials for improving electrocatalytic hydrogen evolution.

Solar light-driven CeVO4/ZnO nanoheterojunction for the mineralization of Reactive Orange 4

In this study, we synthesized CeVO₄/ZnO nanoheterojunction photocatalyst through hydrothermal-precipitation method. The prepared photocatalyst was characterized by Fourier transform infrared analysis (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) with elemental color mapping (ECM), high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern, UV-vis diffuse reflection spectroscopy (UV-vis-DRS), BET, and photoluminescence (PL) spectroscopy. The BET surface area of CeVO₄/ZnO is 10.50 m²/g. The photocatalytic activity of CeVO₄/ZnO nanoheterojunction under solar light was investigated for the degradation of Reactive Orange 4 (RO 4). CeVO₄/ZnO has been found to be more effective for mineralization of RO 4 than the prepared ZnO at neutral pH. The addition of TBA (^•OH scavenger) contributes a significant decrease in the photodegradation efficiently of the catalyst. Chemical oxygen demand (COD) measurements confirmed the complete mineralization of RO 4. In addition, it found that the photocatalyst was stable and reusable. Graphical abstract.

Molecular recognition at the air-water interface: nanoarchitectonic design and physicochemical understanding

Although molecular recognition at the air-water interface has been researched for over 30 years, investigations on its fundamental aspects are still active research targets in current science. In this perspective article, developments and future possibilities of molecular recognition at the air-water interface from pioneering research efforts to current examples are overviewed especially from the physico-chemical viewpoints. Significant enhancements of binding constants for molecular recognition are actually observed at the air-water interface although molecular interactions such as hydrogen bonding are usually suppressed in aqueous media. Recent advanced analytical strategies for direct characterization of interfacial molecules also confirmed the promoted formation of hydrogen bonding at the air-water interfaces. Traditional quantum chemical approaches indicate that modulation of electronic distributions through effects from low-dielectric phases would be the origin of enhanced molecular interactions at the air-water interface. Further theoretical considerations suggest that unusual potential changes for enhanced molecular interactions are available only within a limited range from the interface. These results would be related with molecular recognition in biomolecular systems that is similarly supported by promoted molecular interactions in interfacial environments such as cell membranes, surfaces of protein interiors, and macromolecular interfaces.

Supramolecular Chiral Nanoarchitectonics

Exploration of molecular functions and material properties based on the control of chirality would be a scientifically elegant approach. Here, the fabrication and function of chiral-featured materials from both chiral and achiral components using a supramolecular nanoarchitectonics concept are discussed. The contents are classified in to three topics: i) chiral nanoarchitectonics of rather general molecular assemblies; ii) chiral nanoarchitectonics of metal-organic frameworks (MOFs); iii) chiral nanoarchitectonics in liquid crystals. MOF structures are based on nanoscopically well-defined coordinations, while mesoscopic orientations of liquid-crystalline phases are often flexibly altered. Discussion on the effects and features in these representative materials systems with totally different natures reveals the universal importance of supramolecular chiral nanoarchitectonics. Amplification of chiral molecular information from molecules to materials-level structures and the creation of chirality from achiral components upon temporal statistic fluctuations are universal, regardless of the nature of the assemblies. These features are thus surely advantageous characteristics for a wide range of applications.

Rodlike Cadmium-Incorporated Zinc Tungstate Nanoarchitecture Fabricated by a Facile and Template-Free Strategy as a Photocatalyst for the Effective Degradation of Organic Pollutants in Sewage

Fabricating nanostructures and doping engineering are beneficial to tailor the photocatalytic activity of semiconductor materials, and the semiconducting photocatalysis is deemed to be one of the potential protocols to handle the environmental pollution and energy crisis issues. Herein, rodlike Cd-doped ZnWO4 Zn1-x Cd x WO4 nanoarchitectures were triumphantly prepared by a template-free strategy. The crystal structure, chemical state, optical, and photocatalytic features of the Zn1-x Cd x WO4 nanoarchitectures were studied using a variety of characterizations. The Zn1-x Cd x WO4 nanoarchitectures exhibit glorious photocatalytic performance compared with pristine ZnWO4 for the degradation of methyl orange in sewage. Mechanistic studies were executed for getting insights into the photocatalytic degradation process, and the remarkable photocatalytic property of the doped ZnWO4 nanoarchitectures is attributed to the boosted optical absorptive efficiency and the valid segregation and transmission of photogenerated charge carriers deriving from doping effects. The doped nanoarchitectures of this work have promising applications in the territories such as environment and energy chemistry, and the insight proposed in this work will contribute to develop other functionalized nanoarchitectures.

Interfacial nanoarchitectonics for responsive cellular biosystems

The living cell can be regarded as an ideal functional material system in which many functional systems are working together with high efficiency and specificity mostly under mild ambient conditions. Fabrication of living cell-like functional materials is regarded as one of the final goals of the nanoarchitectonics approach. In this short review article, material-based approaches for regulation of living cell behaviors by external stimuli are discussed. Nanoarchitectonics strategies on cell regulation by various external inputs are first exemplified. Recent approaches on cell regulation with interfacial nanoarchitectonics are also discussed in two extreme cases using a very hard interface with nanoarchitected carbon arrays and a fluidic interface of the liquid-liquid interface. Importance of interfacial nanoarchitectonics in controlling living cells by mechanical and supramolecular stimuli from the interfaces is demonstrated.