Synthesis and Photophysical Properties of Silver(I) Coordination Polymers Bridged by Dimethylpyrazine: Comparison of Emissive Excited States between Silver(I) and Copper(I) Congeners

Highly luminescent silver(I) coordination polymers [Ag2X2(PPh3)2(Me2pyz)]n (X = I, Br, Cl; Me2pyz: 2,5-dimethylpyrazine) were prepared together with copper congeners [Cu2X2(PPh3)2(Me2pyz)]n (X = I, Br). All the complexes showed thermally activated delayed fluorescence from the charge-transfer states in the visible region, from blue to red. The isomorphous relationship among the complexes allowed a detailed discussion of the effect of halogenido ligands and crystal packing on their luminescence energy. The relaxation in the emissive excited states (ESs) was determined to be more remarkable in silver complexes than in copper complexes despite their isomorphous structures, and the electronic effect of halogenido ligands was comparable to the effect of relaxation in emissive ESs.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Versatile Method of Generating Triboluminescence in Polymer Films Blended with Common Luminophores

Herein we report a versatile method for the preparation of triboluminescent polymer films by physical blending with common luminophores. This method does not require the presence of a crystalline phase or the use of materials known to be triboluminescent. Emission is generated in response to friction of the polymer surface via triboelectrification, either by rubbing directly or through an inert coating layer, even with low applied stress (<0.1 MPa). Our findings offer a convenient and practical method of preparation of triboluminescent, amorphous polymer films with easily tunable emission properties.

TADF: Enabling luminescent copper(i) coordination compounds for light-emitting electrochemical cells

The last decade has seen a surge of interest in the emissive behaviour of copper(i) coordination compounds, both neutral compounds that may have applications in organic light-emitting doides (OLEDs) and copper-based ionic transition metal complexes (Cu-iTMCs) with potential use in light-emitting electrochemical cells (LECs). One of the most exciting features of copper(i) coordination compounds is their possibility to exhibit thermally activated delayed fluorescence (TADF) in which the energy separation of the excited singlet (S₁) and excited triplet (T₁) states is very small, permitting intersystem crossing (ISC) and reverse intersystem crossing (RISC) to occur at room temperature without the requirement for the large spin-orbit coupling inferred by the presence of a heavy metal such as iridium. In this review, we focus mainly in Cu-iTMCs, and illustrate how the field of luminescent compounds and those exhibiting TADF has developed. Copper(i) coordination compounds that class as Cu-iTMCs include those containing four-coordinate [Cu(P^P)(N^N)]⁺ (P^P = large-bite angle bisphosphane, and N^N is typically a diimine), [Cu(P)₂(N^N)]⁺ (P = monodentate phosphane ligand), [Cu(P)(tripodal-N₃)]⁺, [Cu(P)(N^N)(N)]⁺ (N = monodentate N-donor ligand), [Cu(P^P)(N^S)]⁺ (N^S = chelating N,S-donor ligand), [Cu(P^P)(P^S)]⁺ (P^S = chelating P,S-donor ligand), [Cu(P^P)(NHC)]⁺ (NHC = N-heterocyclic carbene) coordination domains, dinuclear complexes with P^P and N^N ligands, three-coordinate [Cu(N^N)(NHC)]⁺ and two-coordinate [Cu(N)(NHC)]⁺ complexes. We pay particular attention to solid-state structural features, e.g. π-stacking interactions and other inter-ligand interactions, which may impact on photoluminescence quantum yields. Where emissive Cu-iTMCs have been tested in LECs, we detail the device architectures, and this emphasizes differences which make it difficult to compare LEC performances from different investigations.

Wide-Bite-Angle Diphosphine Ligands in Thermally Activated Delayed Fluorescent Copper(I) Complexes: Impact on the Performance of Electroluminescence Applications

We report a series of seven cationic heteroleptic copper(I) complexes of the form [Cu(P^P)(dmphen)]BF₄, where dmphen is 2,9-dimethyl-1,10-phenanthroline and P^P is a diphosphine chelate, in which the effect of the bite angle of the diphosphine ligand on the photophysical properties of the complexes was studied. Several of the complexes exhibit moderately high photoluminescence quantum yields in the solid state, with Φ_PL of up to 35%, and in solution, with Φ_PL of up to 98%. We were able to correlate the powder photoluminescence quantum yields with the % V_bur of the P^P ligand. The most emissive complexes were used to fabricate both organic light-emitting diodes and light-emitting electrochemical cells (LECs), both of which showed moderate performance. Compared to the benchmark copper(I)-based LECs, [Cu(dnbp)(DPEPhos)]⁺ (maximum external quantum efficiency, EQE_max = 16%), complex 3 (EQE_max = 1.85%) showed a much longer device lifetime (t_1/2 = 1.25 h and >16.5 h for [Cu(dnbp)(DPEPhos)]⁺ and complex 3, respectively). The electrochemiluminescence (ECL) properties of several complexes were also studied, which, to the best of our knowledge, constitutes the first ECL study for heteroleptic copper(I) complexes. Notably, complexes exhibiting more reversible electrochemistry were associated with higher annihilation ECL as well as better performance in a LEC.

Vapochromic luminescence of a spin-coated copper(I) complex thin film by the direct coordination of vapour molecules

A homogeneous thin film of a simple and highly luminescent Cu(i) complex, [CuI(PPh3)2(py)] (PPh3 = triphenylphosphine, py = pyridine) (Cu-py), was fabricated via spin coating using polyvinylpyrrolidone (PVP) and pyridine without destroying the complex. The thin film (Cu-py@PVP), with a thickness of 1 μm, exhibited efficient response to vapour, exhibiting reversible luminescence changes between blue-green and yellow upon exposure to vapours of N-heteroaromatic compounds such as py and 2-methylpyrazine (Mepyz). Vapochromic luminescence colour change resulting from ligand substitution was also observed in the crystal state, but the response of the thin film was remarkably faster than that of the crystalline samples. The vapour-induced ligand exchange on the thin film was fully characterised by comparing the luminescence properties of the Cu-py crystal with the newly prepared Cu(i) complex, [CuI(Mepyz)(PPh3)2] (Cu-Mepyz).

The shiny side of copper: bringing copper(i) light-emitting electrochemical cells closer to application

Heteroleptic [Cu(P^P)(N^N)][PF₆] complexes, where N^N is 5,5′-dimethyl-2,2′-bipyridine (5,5′-Me₂bpy), 4,5,6-trimethyl-2,2′-bipyridine (4,5,6-Me₃bpy), 6-(tert-butyl)-2,2′-bipyridine (6-tBubpy) and 2-ethyl-1,10-phenanthroline (2-Etphen) and P^P is either bis(2-(diphenylphosphino)phenyl)ether (POP, PIN [oxydi(2,1-phenylene)]bis(diphenylphosphane)) or 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (xantphos, PIN (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane)) have been synthesized and their NMR spectroscopic, mass spectrometric, structural, electrochemical and photophysical properties were investigated. The single-crystal structures of [Cu(POP)(5,5′-Me₂bpy)][PF₆], [Cu(xantphos)(5,5′-Me₂bpy)][PF₆], [Cu(POP)(6-tBubpy)][PF₆], [Cu(POP)(4,5,6-Me₃bpy)][PF₆]·1.5Et₂O, [Cu(xantphos)(4,5,6-Me₃bpy)][PF₆]·2.33CH₂Cl₂, [Cu(POP)(2-Etphen)][PF₆] and [Cu(xantphos)(2-Etphen)][PF₆] are described. While alkyl substituents in general exhibit electron-donating properties, variation in the nature and substitution-position of the alkyl group in the N^N chelate leads to different effects in the photophysical properties of the [Cu(P^P)(N^N)][PF₆] complexes. In the solid state, the complexes are yellow to green emitters with emission maxima between 518 and 602 nm, and photoluminescence quantum yields (PLQYs) ranging from 1.1 to 58.8%. All complexes show thermally activated delayed fluorescence (TADF). The complexes were employed in the active layer of light-emitting electrochemical cells (LECs). The device performance properties are among the best reported for copper-based LECs, with maximum luminance values of up to 462 cd m⁻² and device half-lifetimes of up to 98 hours.

Heteroleptic copper(i) complexes with bisphosphanes and astutely tuned N^N chelating ligands as emitters give bright LECs with record-breaking stability.