Halide Exchange in Perovskites Enables Bromine/Iodine Hybrid Cathodes for Highly Durable Zinc Ion Batteries

With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, C─H…Br hydrogen bonds, and Pb─I…Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.

Aqueous Rechargeable Zn-Iodine Batteries: Issues, Strategies and Perspectives

The static aqueous rechargeable Zn-Iodine batteries (ARZiBs) have been studied extensively because of their low-cost, high-safety, moderate voltage output, and other unique merits. Nonetheless, the poor electrical conductivity and thermodynamic instability of the iodine cathode, the complicated conversion mechanism, and the severe interfacial reactions at the Zn anode side induce their low operability and unsatisfactory cycling stability. This review first clarifies the typical configuration of ARZiBs with a focus on the energy storage mechanism and uncovers the issues of the ARZiBs from a fundamental point of view. After that, it categorizes the recent optimization strategies into cathode fabrication, electrolyte modulation, and separator/anode modification; and summarizes and highlights the achieved progress of these strategies in advanced ARZiBs. Given that the ARZiBs are still at an early stage, the future research outlook is provided, which hopefully may guide the rational design of advanced ARZiBs.

Halogen-powered static conversion chemistry

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

Perovskite Cathodes for Aqueous and Organic Iodine Batteries Operating Under One and Two Electrons Redox Modes

Although conversion-type iodine-based batteries are considered promising for energy storage systems, stable electrode materials are scarce, especially for high-performance multi-electron reactions. The use of tin-based iodine-rich 2D Dion-Jacobson (DJ) ODASnI4 (ODA: 1,8-octanediamine) perovskite materials as cathode materials for iodine-based batteries is suggested. As a proof of concept, organic lithium-perovskite and aqueous zinc-perovskite batteries are fabricated and they can be operated based on the conventional one-electron and advanced two-electron transfer modes. The active elemental iodine in the perovskite cathode provides capacity through a reversible I- /I+ redox pair conversion at full depth, and the rapid electron injection/extraction leads to excellent reaction kinetics. Consequently, high discharge plateaus (1.71 V vs Zn2+ /Zn; 3.41 V vs Li+ /Li), large capacity (421 mAh g-1 I ), and a low decay rate (1.74 mV mAh-1 g-1 I ) are achieved for lithium and zinc ion batteries, respectively. This study demonstrates the promising potential of perovskite materials for high-performance metal-iodine batteries. Their reactions based on the two-electron transfer mechanism shed light on similar battery systems aiming for decent operational stability and high energy density.

Trapping Halogen Anions in Cationic Viologen Porous Organic Polymers for Highly Cycling-Stable Cathode Materials

Halogens, especially Br2 and I2 , as cathode materials for lithium-ion batteries exhibit high energy density with low cost, but poor cycling performance due to their high solubility in electrolyte solution. Herein, viologen-based cationic porous organic polymers (TpVXs, X = Cl, Br, or I) with abundant pores and ionic redox-active moieties are designed to immobilize halogen anions stoichiometrically. TpVBr and TpVI electrodes exhibit high initial specific capacity (116 and 132 mAh g-1 at 0.2 C) and high average discharge voltage (≈3.0 V) without any host materials. Notably, benefiting from the porous and ionic structure, TpVBr and TpVI present excellent long-term cycling stability (86% and 98% capacity retention after 600 cycles at 0.5 C), which are far superior to those of the state-of-the-art halogen electrodes. In addition, the charge storage mechanism is investigated by in situ Raman and ex situ X-ray photoelectron spectroscopy.

Three-Electron Transfer-Based High-Capacity Organic Lithium-Iodine (Chlorine) Batteries

Conversion-type batteries apply the principle that more charge transfer is preferable. The underutilized electron transfer mode within two undermines the electrochemical performance of halogen batteries. Here, we realised a three-electron transfer lithium-halogen battery based on I- /I+ and Cl- /Cl0 couples by using a common commercial electrolyte saturated with Cl- anions. The resulting Li||tetrabutylammonium triiodide (TBAI3 ) cell exhibits three distinct discharging plateaus at 2.97, 3.40, and 3.85 V. Moreover, it has a high capacity of 631 mAh g-1 I (265 mAh g-1 electrode , based on entire mass loading) and record-high energy density of up to 2013 Wh kg-1 I (845 Wh kg-1 electrode ). To support these findings, experimental characterisations and density functional theory calculations were conducted to elucidate the redox chemistry involved in this novel interhalogen strategy. We believe our paradigm presented here has a foreseeable inspiring effect on other halogen batteries for high-energy-density pursuit.

Zinc-dual-halide complexes suppressing polyhalide formation for rechargeable aqueous zinc-halogen batteries

Aqueous zinc-halogen batteries suffer from poor coulombic efficiency and short cycle life owing to the formation and dissolution of polyhalides in electrolytes. Herein, we apply a zinc-dual-halide complex strategy to confine free halides and suppress polyhalide formation. The high stabilities of zinc-dual-halide complexes are identified to be essential for effective confinement. The resulting Zn-Br2 and Zn-I2 cells deliver excellent rate capability and cycling stability, as well as high coulombic efficiency and energy efficiency.

Anion Storage of MXenes

Recently, anion storage materials have gained significant attention owing to the widened cell voltage and additional anion storing capacity for a large energy density. MXenes are considered as the emerging anion storing materials owing to their sufficient interlayer spacing, rich surface chemistries, tunable structures, remarkable electrochemical properties, and mechanical integrity. Herein, a comprehensive review on the anion storage of MXenes covering their anion storage mechanism and state-of-the-art chemical strategies for the improved anion storage performances is reported. The recent progress of MXenes on aluminum ion batteries, metal halogen batteries, halogen ion batteries, and electrochemical electrode deionization is addressed. The scientific and technical challenges and the research direction into the anion storage of MXenes are also addressed and finally the authors' perspective on anion storage of MXenes is provided. Therefore, this review offers an insight into the rational design of MXenes for anion storage materials and the correlation of surface chemistries and structural modifications with anion storage properties for the applications into electrochemical energy storage and water purification.

Rechargeable Iodine Batteries: Fundamentals, Advances, and Perspectives

Lattice distortion and structure collapse are two intrinsic issues of intercalative-type electrodes derived from repeated ion shuttling. In contrast, rechargeable iodine batteries (RIBs) based on the conversion reaction of iodine stand out for high reversibility and satisfying voltage output characteristics no matter when dealing with both monovalent and multivalent ions. Foreseeable performance superiorities lead to an influx of considerable focus and thus a renaissance in RIBs. This review provides a comprehensive overview of the fundamental chemistry of RIBs from the perspectives of physicochemical properties, conversion mechanism, and existing issues. Furthermore, we refine the optimization strategies for high-performance RIBs, focusing on physical adsorption and chemical interaction strengthening, electrolytes regulation, and nanoscale-iodine design. Then the pros and cons of tremendous RIBs are compared and specified. Ultimately, we conclude with remaining challenges and perspectives to our best knowledge, which may inspire the construction of next-generation RIBs.

Bio-interactive nanoarchitectonics with two-dimensional materials and environments

Like the proposal of nanotechnology by Richard Feynman, the nanoarchitectonics concept was initially proposed by Masakazu Aono. The nanoarchitectonics strategy conceptually fuses nanotechnology with other research fields including organic chemistry, supramolecular chemistry, micro/nanofabrication, materials science, and bio-related sciences, and aims to produce functional materials from nanoscale components. In this review article, bio-interactive nanoarchitectonics and two-dimensional materials and environments are discussed as a selected topic. The account gives general examples of nanoarchitectonics of two-dimensional materials for energy storage, catalysis, and biomedical applications, followed by explanations of bio-related applications with two-dimensional materials such as two-dimensional biomimetic nanosheets, fullerene nanosheets, and two-dimensional assemblies of one-dimensional fullerene nanowhiskers (FNWs). The discussion on bio-interactive nanoarchitectonics in two-dimensional environments further extends to liquid-liquid interfaces such as fluorocarbon-medium interfaces and viscous liquid interfaces as new frontiers of two-dimensional environments for bio-related applications. Controlling differentiation of stem cells at fluidic liquid interfaces is also discussed. Finally, a conclusive section briefly summarizes features of bio-interactive nanoarchitectonics with two-dimensional materials and environments and discusses possible future perspectives.