Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Progress on Separation and Hydrothermal Carbonization of Rice Husk Toward Environmental Applications

Owing to the increasing global demand for carbon resources, pressure on finite materials, including petroleum and inorganic resources, is expected to increase in the future. Efficient utilization of waste resources has become crucial for sustainable resource acquisition for creating the next generation of industries. Rice husks, which are abundant worldwide as agricultural waste, are a rich carbon source with a high silica content and have the potential to be an effective raw material for energy-related and environmental purification materials such as battery, catalyst, and adsorbent. Converting these into valuable resources often requires separation and carbonization; however, these processes incur significant energy losses, which may offset the benefits of using biomass resources in the process steps. This review summarizes and discusses the high value of RHs, which are abundant as agricultural waste. Technologies for separating and converting RHs into valuable resources by hydrothermal carbonization are summarized based on the energy efficiency of the process.

Synthesis of unused-wood-derived C-Fe-N catalysts for oxygen reduction reaction by heteroatom doping during hydrothermal carbonization and subsequent carbonization in nitrogen atmosphere

There is an urgent need to develop renewable sources of energy and use existing resources in an efficient manner. In this study, in order to improve the utilization of unused biomass and develop green processes and sustainable technologies for energy production and storage, unused Douglas fir sawdust (SD) was transformed into catalysts for the oxygen reduction reaction. Fe and N were doped into SD during hydrothermal carbonization, and the N- and Fe-doped wood-derived carbon (Fe/N/SD) was carbonized in a nitrogen atmosphere. After the catalyst had been calcined at 800°C, its showed the highest current density (-5.86 mAcm^-2 at 0.5 V versus reversible hydrogen electrode or RHE) and E_onset value (0.913 V versus RHE). Furthermore, its current density was higher than that of Pt/C (20 wt% Pt) (-5.66 mA cm^-2 @0.5 V versus RHE). Finally, after 50 000 s, the current density of sample Fe/N/SD (2 : 10 : 10) remained at 79.3% of the initial value. Thus, the synthesized catalysts, which can be produced readily at a low cost, are suitable for use in various types of energy generation and storage devices, such as fuel cells and air batteries. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.

Bio-inspired Incrustation Interfacial Polymerization of Dopamine and Cross-linking with Gelatin toward Robust, Biodegradable Three-Dimensional Hydrogels

In nature, laccase enzymatically catalyzes the reaction of phenolic compounds with oxygen to produce hardened surfaces known as cuticles on insects and plants. Inspired by this natural process, the present work investigated a robust, biodegradable hydrogel synthesized from dopamine and gelatin. This gel is obtained by the oxidation of dopamine dissolved in water, after which the resulting quinone compound automatically undergoes self-polymerization. The oxidized dopamine subsequently undergoes Schiff base and Michael addition reactions with gelatin, such that the exposed gelatin surface cross-links to generate a continuous hardened hydrogel film. Because gelatin transitions between sol and gel states with changes in temperature, two- and three-dimensional structures could be obtained from the gel state. This bio-inspired interfacial cross-linking reaction provides a simple means of forming complex morphologies and represents a promising technique for bio-applications.

Polydopamine Films with 2D-like Layered Structure and High Mechanical Resilience

Highly oriented, layered, and mechanically resilient films of polydopamine (PDA) have been synthesized from the air/water interface. The films show a unique layered structure, as shown by scanning and transmission electron studies (SEM/TEM) and X-ray diffraction analysis (XRD), which resemble that of 2D layered materials. The films exhibit a composition typical of PDA-based materials, as evidenced by X-ray photoelectron spectroscopy (XPS); moreover, the samples present the distinctive resonance modes of PDA-based nanomaterials in Raman and infrared spectroscopy (FTIR) experiments. The presence of highly ordinated 3-4 protomolecule stacking, taking place at the air/water interface, with a unique eumelanin-like supramolecular arrangement is presented. Moreover, the films show superior mechanical resilience with E = 13 ± 4 GPa and H = 0.21 ± 0.03 GPa, as revealed by nanoindentation experiments, making them highly resilient and easily transferable. Finally, the ordering induced by the interface opens many possibilities for further studies, including those regarding the supramolecular structure on PDA due to their similarity to 2D layered materials.

Heteroatom-doped carbon electrocatalysts prepared from marine biomass cellulose nanocrystals and bio-inspired polydopamine for the oxygen reduction reaction

Heteroatom-doped carbon electrocatalysts were prepared from marine biomass cellulose nanocrystals as potential electrocatalysts for an efficient oxygen reduction reaction.

S/N Co-Doped Hollow Carbon Particles for Oxygen Reduction Electrocatalysts Prepared by Spontaneous Polymerization at Oil-Water Interfaces

We herein report that sulfur and nitrogen co-doped hollow spherical carbon particles can be applied to oxygen reduction reaction (ORR) electrocatalysts prepared by calcination of polydopamine (PDA) hollow particles. The hollow structure of PDA was formed by auto-oxidative interfacial polymerization of dopamine at the oil and water interface of emulsion microdroplets. The PDA was used as the nitrogen source as well as a platform for sulfur-doping. The obtained sulfur and nitrogen co-doped hollow particles showed a higher catalytic activity than that of nonsulfur-doped particles and nonhollow particles. The high ORR activity of the calcined S-doped PDA hollow particles could be attributed to the combination of nitrogen and sulfur active sites and the large surface areas owing to a hollow spherical structure.