Designing High-Sensitivity Mechanochromic Luminescent Materials Through Friction-Induced Crystallization Strategy

Despite recent significant breakthroughs in novel mechanochromic luminescent (ML) materials, developing a high-sensitivity ML material is still challengeable. Herein, a "friction-induced crystallization" strategy is proposed to realize highly sensitive transformations of luminescent signal, through an integration of polymeric chains and an aggregation-sensitive luminescent core, which act as mechanical sensors and fluochromic actuators, respectively. The coupling of these two components enables the material to crystallize in response to shear friction, thereby exhibiting blue-shift fluorescence due to a more restricted relaxation pathway. This study underscores a high-sensitivity ML material based on the precise regulation of molecular-scale motions, and also expands the scope and potential of ML materials toward user-friendly, interactive wearable devices.

High-Temperature Solid-State Post-Synthetic Modification of Highly Luminescent Cu(I) Metallacycles toward New Luminescent Thermic Tracers

A new luminescent Cu(I) tetrametallic metallacycle B is reported that features very rare semi-bridging aqua ligands. When heated markedly above room temperature, this compound undergoes a post-synthetic transformation in the solid-state, affording the new luminescent metallacycle C. Thermogravimetric analysis, IR spectroscopy and single-crystal X-ray diffraction reveal that this alteration preserves the gross tetrametallic macrocycle structure, but is caused by the release of the coordinated water molecules with the concomitant formation of cuprophilic interactions. This transition induces a shift from eye-perceived green (B) to blue (C) room-temperature luminescence for these molecular solids. Photophysical measurements and time-dependent density-functional theory calculations have been conducted to identify the origins of the emission properties lying in these structurally related assemblies, and suggest that thermally activated delayed fluorescence dominates the radiative relaxation pathways. This study highlights the innovative feature of Cu(I) derivatives, offering access to stimuli-sensitive materials that can witness, a posteriori, the exceeding of critical temperatures in their environment.

Grinding-Induced Water Solubility Exhibited by Mechanochromic Luminescent Supramolecular Fibers

Most mechanochromic luminescent compounds are crystalline and highly hydrophobic; however, mechanochromic luminescent molecular assemblies comprising amphiphilic molecules have rarely been explored. This study investigated mechanochromic luminescent supramolecular fibers composed of dumbbell-shaped 9,10-bis(phenylethynyl)anthracene-based amphiphiles without any tetraethylene glycol (TEG) substituents or with two TEG substituents. Both amphiphiles formed water-insoluble supramolecular fibers via linear hydrogen bond formation. Both compounds acquired water solubility when solid samples composed of supramolecular fibers are ground. Grinding induces the conversion of 1D supramolecular fibers into micellar assemblies where fluorophores can form excimers, thereby resulting in a large redshift in the fluorescence spectra. Excimer emission from the ground amphiphile without TEG chains is retained after dissolution in water. The micelles are stable in water because hydrophilic dendrons surround the hydrophobic luminophores. By contrast, when water is added to a ground amphiphile having TEG substituents, fragmented supramolecular fibers with the same molecular arrangement as the initial supramolecular fibers are observed, because fragmented fibers are thermodynamically preferable to micelles as the hydrophobic arrays of fluorophores are covered with hydrophilic TEG chains. This leads to the recovery of the initial fluorescent properties for the latter amphiphile. These supramolecular fibers can be used as practical mechanosensors to detect forces at the mesoscale.

Dual-Stimuli-Responsive Turn-On Luminescence of Chiral Bisimidazolyl BINOL Dimethyl Ether Crystals

Stimuli-responsive organic luminescent crystals have attracted significant attention in recent years for their potential in sensor and memory applications. While turn-on luminescence is superior in detection sensitivity compared with turn-off luminescence, the development of organic crystals that exhibit turn-on luminescence in response to multiple stimuli remains a significant challenge. Herein, the crystals of chiral bisimidazolyl 1,1'-bi-2-naphthol (BINOL) dimethyl ether have exhibited a dual-stimuli-responsive turn-on luminescence based on two distinct mechanisms. In the crystalline state, luminescence was substantially quenched by the intermolecular hydrogen bonds between the imidazole rings. Mechanical stimulation induced a transition to a blue-violet-emissive amorphous state. In contrast, thermal stimulation produced an orange luminescence, attributed to excited-state intramolecular proton transfer (ESIPT) luminescence from thermally demethylated products. Furthermore, the thermally induced state exhibited circularly polarized luminescence (CPL), marking a rare instance of stimuli-responsive turn-on CPL in a solid-state system. This study provides new insights into environmental and structural factors for solid-state luminescent properties and advances the design guidelines for multifunctional luminescent sensors.

Orchestrated Octuple C-H Activation: A Bottom-Up Topology Engineering Approach toward Stimuli-Responsive Double-Heptagon-Embedded Wavy Polycyclic Heteroaromatics

Curiosity-driven innovations on the design and synthesis of nonplanar polycyclic aromatic/heteroaromatic compounds with new molecular topologies unfold exciting opportunities for harnessing their intriguing supramolecular properties and thereby the development of novel functional organic materials. This work presents such an innovative synthetic concept of a bottom-up molecular topology engineering through a unique orchestrated octuple C-H activation reaction, toward the rapid synthesis of a novel class of double heptagon-incorporated nitrogen-doped laterally-fused polycyclic compounds with rarely reported wavy structural configuration. The profound impact of the molecular wavy structures of these compounds on their properties is manifested by weak and tunable solid-state intermolecular interactions controlling the electronic properties of the materials, leading to reversibly switchable fluorochromism in the solid state and thin films with mechanical force and solvent vapors as external stimuli, thereby indicating their potential applicability in rewritable fluorescent optical recording media, security papers, mechanosensors, volatile organic compound (VOC) sensors etc.

Mechanoactivated amorphization and photopolymerization of styryldipyryliums

Conventional topochemical photopolymerization reactions occur exclusively in precisely-engineered photoactive crystalline states, which often produces high-insoluble polymers. To mitigate this, here, we report the mechanoactivation of photostable styryldipyrylium-based monomers, which results in their amorphization-enabled solid-state photopolymerization and produces soluble and processable amorphous polymers. A combination of solid-state nuclear magnetic resonance, X-ray diffraction, and absorption/fluorescence spectroscopy reveals the crucial role of a mechanically-disordered monomer phase in yielding polymers via photo-induced [2 + 2] cycloaddition reaction. Hence, mechanoactivation and amorphization can expand the scope of topochemical polymerization conditions to open up opportunities for generating polymers that are otherwise difficult to synthesize and analyze.

The Photosalient Effect and Thermochromic Luminescence Based on o-Carborane-Assisted π-Stacking in the Crystalline State

Herein, we report the unique multiple-stimuli responsiveness of anthracene-tethered o-carborane derivatives. We designed and synthesized anthracene derivatives with different substitution positions and numbers of the o-carborane units. Two compounds had characteristic crystal structures involving the columnar π-stacking structures of the anthracene units. From the analysis of crystalline-state structure-property relationships, it was revealed that the crystals exhibited the photosalient effect accompanied by photochemical [4+4] cycloaddition reactions and temperature-dependent photophysical dual-emission properties including excimer emission of anthracene. Those properties were considered as non-radiative and radiative deactivation pathways through the excimer formation in the excited state and the formation of excimer species was facilitated by the π-stacking structure of anthracene units. Moreover, we found unusual temperature dependency on the occurrence of the photosalient effect. According to the data from variable temperature X-ray crystallography, a strong correlation between lattice shrinkage and strain accumulation is suggested.

Structure-activity strategies for mechanically responsive fluorescent materials: a molecular perspective

Mechanical response luminescence (MRL) describes the photophysical properties triggered by mechanical stimulation. Usually, MRL can be regulated by intermolecular interactions, molecular conformation or molecular packing, to achieve the desirable optical properties. Herein, at the molecular level, this review covers the factors that influence mechanically responsive fluorescent materials, involving the single- or multifactorial modulation of aliphatic chains, donor-receptor switch, substituent adjustment, and position isomerism. According to these factors, the structure-activity strategies can be summarized as: (i) the self-recovery of optical properties, from the final to initial state, can be regulated by introducing long alkyl chains to a fluorophore. (ii) The sensitivity of MRL materials can be controlled by modifying the donor-acceptor structure via the changed ICT (intramolecular charge transfer) and intramolecular interaction. (iii) The electronic and steric effects of substituents can affect ICT and intermolecular interactions, thereby resulting in high quantum yield and high-contrast MRL materials via changing the molecular stacking of crystalline states. (iv) Intermolecular interaction is modulated by the position isomerism of the substituents, which results in switched molecular packing for the extended response toward a wide range of stimuli. It is anticipated that the molecular mechanisms of these structure-activity relationships will serve as a significant reference for developing novel, high contrast, recyclable mechanical response luminous materials.

Stimuli-Responsive Properties on a Bisbenzofuropyrazine Core: Mechanochromism and Concentration-Controlled Vapochromism

Stimulus-responsive organic materials with luminescence switching properties have attracted considerable attention for their practical applications in sensing, security, and display devices. In this paper, bent-type bisbenzofuropyrazine derivatives, Bent-H and Bent-sBu, with good solubilities were synthesized, and their physical and optical properties were investigated in detail. Bent-H gave three crystalline polymorphs, and they showed different luminescence properties depending on their crystal packing structures. In addition, Bent-H exhibited mechanochromic luminescence in spite of its rigid skeleton. Bent-sBu exhibited unique concentration-dependent vapochromic luminescence. Ground Bent-sBu was converted to blue-emissive, green-emissive, and green-emissive high-viscosity solution states at low, moderate, and high concentrations of CHCl3 vapor, respectively. This finding represents a concentration-dependent multi-phase transition with an organic solvent, which is of potent interest for application in sensing systems.

Hydrosilane/Organoiodine Coupling-Enabled Studies of Organosilane Physical Properties

ConspectusThis Account summarizes recent developments in metal-mediated coupling reactions between hydrosilanes and aryl iodides in the presence of Pd(P(t-Bu)3)2 and base. Alkylated organosilanes are obtained when Pt(P(t-Bu)3)2 and a base are employed in reactions between hydrosilanes and aliphatic iodides. These transformations show unusual reactivity compared to the typical behavior of hydrosilanes toward organoiodides in the presence of PdCl2 or PtCl2, and they proceed in high yields under mild conditions. In addition, the reaction demonstrates (1) high functional group tolerances, (2) stepwise introduction of substituents onto silicon atoms from secondary silanes, and (3) transformation without cleavage of weak Si-Si σ bonds in the molecules.This transformation can serve as a powerful tool for the synthesis of functional organosilicon compounds. The advantage is the flexibility in the molecular structure due to the large size compared to carbon. These compounds have relatively sparse packing in the crystalline state, unlike π-conjugated molecules, which induce dense π-π interactions. Consequently, they have significantly different physical properties in solution and in the solid state. Among them, aromatic disilanes and oligosilanes are important substance groups, because the conjugated chain within these molecules expands due to σ-π interaction between Si-Si σ bond and π orbital of aromatic ring. σ-π Conjugation is most efficient when the dihedral angle between the aromatic ring and the Si-Si bond is 90°, resulting in the overlap of σ orbital and π orbital. The conformational structure, packing, and physical properties of these compounds can change in tandem in response to external stimuli through a crystal phase transition. The interlocking changes in structure and physical properties are reversible, easily returning to their original state with different external stimulus. This account covers several important aspects, including solid-state emission with high fluorescence intensity, aggregation-induced emission (AIE) in water-THF system, mechanochromic fluorescence, organic light emitting diode (OLED), second harmonic generation (SHG) and thermosalient phenomena.This reaction can synthesize optically active tertiary and quaternary silanes by the enantioselective arylation of secondary silanes with aryl iodides using a palladium catalyst modified with a TADDOL-derived amide phosphoric acid ester as a chiral ligand. These optically active compounds can be used as useful circularly polarized luminescence (CPL) materials due to their strong luminescence intensity (Φ) and luminescence dissymmetry factor (glum) attributed to the chiral silicon atom. The efficient synthesis of sila-pharmaceuticals using this method as a key step is also described.The technique enables the design and synthesis of various silicon-containing bioactive substances and medical chemicals. Through the synthesis of organosilane compounds using this method, it is anticipated that the development of functional organic silanes will accelerate their practical applications in a wide range of fields.

Synthesis and luminescence properties of substituted benzils

Photophysical properties of benzil (1,2-diphenylethane-1,2-dione) and its derivatives in the crystal state have recently attracted much attention. However, the study of substituted benzils has mostly been limited to para-substituted derivatives, which did not induce a significant effect on the emission wavelength compared to pristine benzil. The effects of ortho- and meta-substituents on the photophysical properties in the crystal state have not been investigated so far. Our recently developed organocatalytic pinacol coupling of substituted benzaldehydes allowed us to prepare various ortho-, meta-, and para-substituted benzil derivatives and to investigate their luminescence properties. Ortho- and meta-substituents affected the electronic states of benzils in the crystal state, resulting in differences in their luminescence properties. The luminescence wavelength and type, i.e., phosphorescence or fluorescence, were altered by these substituents. Fast self-recovering phosphorescence-to-phosphorescence mechanochromism by the para-CF3 substituent at room temperature was also discovered.

Singlet Oxygen Generation Driven by Sulfide Ligand Exchange on Porphyrin-Gold Nanoparticle Conjugates

Here, we report a switching method of singlet oxygen (¹O₂) generation based on the adsorption/desorption of porphyrins to gold nanoparticles driven by sulfide (thiol or disulfide) compounds. The generation of ¹O₂ by photosensitization is effectively suppressed by the gold nanoparticles and can be restored by a sulfide ligand exchange reaction. The on/off ratio of ¹O₂ quantum yield (Φ_Δ) reached 7.4. By examining various incoming sulfide compounds, it was found that the ligand exchange reaction on the gold nanoparticle surface could be thermodynamically or kinetically controlled. The remaining gold nanoparticles in the system still suppress the generation of ¹O₂, which can be precipitated out simultaneously with porphyrin desorption by the proper polarity choice of the incoming sulfide to restore the ¹O₂ generation.

Carbazole fluorophore with an imidazole/thiazole unit: contrasting stimuli-induced fluorescence switching, water-sensing and deep-blue emission

Carbazole-based, π-conjugated donor-acceptor fluorophores were synthesized by integrating imidazole/thiazole units. Then, we investigated the impact of subtle structural changes on fluorescence properties. Carbazole integrated with imidazole (Cz-I) and carbazole integrated with thiazole (Cz-T) showed strong fluorescence in solution (quantum yield (Φ _f) = 0.18 (Cz-I) and 0.14 (Cz-T) compared with the standard quinine sulfate) and solid-state (Φ _f = 8.0% (Cz-I) and 14.6% (Cz-T)). Cz-I showed relatively more blue-shifted emission in solution compared with the solid-state (λ _max = 417 nm (CH₃CN) and 460 nm (solid)). Cz-T exhibited deep-blue emission in the solid-state compared with solution (λ _max = 455 nm (CH₃CN) and 418 nm (solid)). Interestingly, Cz-T exhibited a drastic change in fluorescence in organic solvents (CH₃CN, THF, CH₃OH, DMSO) with a low percentage (1%) of water. Cz-I showed reversible fluorescence switching between two fluorescence states upon exposure to trifluoracetic acid (TFA)/ammonia (NH₃). In contrast, Cz-T displayed reversible/self-reversible off-on fluorescence switching upon exposure to TFA or NH₃. Mechanofluorochromic studies of Cz-I showed a slight reduction in fluorescence intensity upon crushing and reversal to the initial state upon heating. Cz-T exhibited off-on reversible/self-reversible fluorescence switching upon crushing/heating. Computational studies indicated that thiazole integration improved the electron-withdrawing characteristics compared with imidazole and contributed to contrasting fluorescence responses. Thus, a simple change of nitrogen with sulfur produced contrasting self-assembly in the solid-state that led to different functional properties and stimuli-induced fluorescence switching.

15N CP/MAS NMR as a Tool for the Mechanistic Study of Mechanical Stimuli-Responsive Materials: Evidence for the Conformational Change of an Emissive Dimethylacridane Derivative

Mechanochromic luminescent molecules are currently attracting considerable attention because of their promising technological applications, but understanding their mechanism of action is challenging and is thus hindering our deeper understanding of these materials. The conformational change of 9,9'-dimethyl-9,10-dihydroacridane derivative 1 was examined using solid-state ¹⁵N nuclear magnetic resonance (NMR) spectroscopic techniques without using a specifically ¹⁵N-labeled compound. A difference between the two conformers was clearly observed in the measurements and was assigned to the ⟨pl⟩ and ⟨bf⟩ spatial structures. The results were supported by quantum chemical calculations on ¹⁵N NMR chemical shifts of each isomer. The technique presented here can clearly identify the structural changes caused by crushing a powder sample. Such structural changes are difficult to determine using X-ray diffraction (XRD) measurements.

9,9-Bis[4-(N-aryl)phenyl]methylidene-xanthylidene Derivatives Displaying Mechano-, Crystallo-, and Thermochromism

Tetraphenylethylene (TPE) derivatives bearing a xanthene moiety are of interest because they have novel optical properties. 9,9-Bis[4-(N,N-diphenylamino)phenyl] and 9,9-bis[4-(9-carbazolyl)-phenyl]methylidene-xanthylidenes 3 and 4 were synthesized using Suzuki-Miyaura coupling of 9,9-dibromomethylidene-xanthylidene with the corresponding boronic acids. Diphenylamino derivative 3 exhibits mechanochromism and mechanofluorochromism (MC and MFC) reflected in absorption and fluorescence color changes. In contrast, carbazolyl derivative 4 displays thermo- and crystallo-chromism in addition to MC and MFC in the solid state. Powder X-ray diffraction and single crystal X-ray crystallographic analysis reveal that the solid state photophysical properties of these substances are governed by conformational changes rather by the creation of planar π-conjugation extended geometries.

Conjugating Coumarin with Tetraphenylethylene to Achieve Dual-State Emission for Reversible Mechanofluorochromism and Live Cell Imaging

Dual-state emission luminogens (DSEgens) are receiving research interest in the construction of multifunctional materials due to their inherent advantage of high emission efficiency in both the molecularly dispersed solution state and the solid state. However, it remains challenging in synthesizing DSEgens via a delicate manipulation of the molecular structures. This work presents an example of bright DSEgen synthesis by tuning the molecular electronic structures and conformations. Three coumarin-tetraphenylethylene (TPE) molecules with a donor-acceptor electronic structure and highly twisting conformations have been synthesized. While compound resulting from direct conjugation of coumarin with a TPE unit shows aggregation-induced emission, compound with an N,N-diaminoethyl modification on the 7-position of coumarin and compound with a further phenyl linker between coumarin and TPE units feature strong dual-state emission. Benefiting from their strong solid emission and twisting conformations, these fluorophores display reversible mechanofluorochromism. Finally, applications for rewritable information storage in the solid state and live-cell imaging in the solution state were demonstrated.

Luminescent fac-[ReX(CO)3(phenyl-pyta)] (X = Cl, Br, I) complexes: influence of the halide ligand on the electronic properties in solution and in the solid state

Tricarbonylrhenium(I) complexes that incorporate a chloride ligand are promising photoluminescent materials, but those incorporating a bromide or iodide ligand have received very little attention regarding their solid-state properties. In this work, three rhenium(I) complexes differing only by the nature of their halide ligand (X = Cl, Br, and I) were compared. They are based on a fac-[ReX(CO)₃(N^N)] framework where the N^N bidentate ligand is a 3-(2-pyridyl)-1,2,4-triazole unit functionalized by an appended phenyl group. DFT calculations showed that the character of the lowest energy transitions progressively changes from Re → N^N ligand (MLCT) to X → N^N ligand (XLCT) when increasing the size of the halogen atom. Regarding the electrochemical behavior, the chloride and bromide complexes 1-Cl and 1-Br were similar, while the iodide complex 1-I exhibited a strikingly different electrochemical signature in oxidation. From a spectroscopic viewpoint, all three complexes emitted weak red-orange phosphorescence in dichloromethane solution. However, in the solid state, marked differences appeared. Not only was 1-Cl a good emitter of yellow light, but it had strong solid-state luminescence enhancement (SLE) properties. In comparison, 1-Br and 1-I were less emissive and they showed better mechanoresponsive luminescence (MRL) properties, probably related to a loose molecular arrangement in the crystal packing and to the opening of vibrational non-radiative deactivation pathways. This study highlights for the first time how the nature of the halide ligand in this type of complex allows fine tuning of the solid-state optical properties, for potential applications either in bio-imaging or in the field of MRL-active materials.

Solvates of a dianisyl-substituted donor–acceptor-type benzothiadiazole: mechanochromic, vapochromic, and acid-responsive multicolor luminescence

Solvates of a donor–acceptor-type fluorophore exhibited multicolor luminescence that can respond to mechanical stimuli, solvent and acid vapors.

Self-Assembly of Mechanoluminochromic Ladder-Shaped Gold(I) Clusters Promoted Using Cooperative Aurophilicity

The self-assembly of mechanoluminochromic polynuclear gold(I) complexes has attracted more and more attention in the field of supramolecular gold(I) chemistry. In this work, we adopted a stepwise self-assembly strategy to precisely synthesize two polynuclear gold(I) supramolecular clusters. Through cooperative Au^I···Au^I and Au-N interactions, the gold(I) clusters 1⁺•BF₄^- and 2⁴⁺•4BF₄^- with Au₄ and Au₁₆ cores, respectively, were successfully constructed. In these supramolecular clusters, (dppm)Au₂Cl₂ coordination motifs and trithiocyanuric linkers were stepwise assembled via sequential thiolate-chloride/phosphine coordination substitution and Au-S/Au-N coordination bond rearrangement. Two well-defined gold(I) supramolecular clusters displayed intense emission both in the solid state and in solution. Furthermore, the ladder-shaped cluster 2⁴⁺•4BF₄^- exhibited reversible mechanochromic luminescence behavior in the solid state as well as aggregation-caused redshifted emission in solution. Upon mechanical grinding, the emission of the cluster 2⁴⁺•4BF₄^- changed from yellow at 582 nm to red at 612 nm. The initial emission could be fully recovered by treatment with acetonitrile.

A Series of D-A-D Structured Disilane-Bridged Triads: Structure and Stimuli-Responsive Luminescence Studies

A series of σ-π extended octamethyltetrasilanes, which have phenothiazine, 9,9-dimethyl-9,10-dihydroacridine, or phenoxazine (1, 2, and 3) groups as donor moieties and thienopyrazine or benzothiadiazole (a and b) groups as acceptor fragments, has been prepared, and their optical properties have been studied as an extension of our work. All six compounds exhibited fluorescence in the solid state with maximum wavelengths centered in the range of 400 and 650 nm upon excitation by a UV lamp. Compound 2b showed apparent dual emission behavior in solution, which depends on solvent polarity, and a reversible photoluminescent change under mechanical and thermal stimuli in the solid state. Quantum chemical calculations suggest the contribution of a quasi-axial conformer of the 9,9-dimethyl-9,10-dihydroacridine moiety in 2b to the dual emission in solution and the mechanofluoroluminescence in the solid state, similarly to 1a. These studies provide new insight into the preparation of disilane-bridged triads capable of responding to multiple stimuli.

Extension of the mechanoresponsive luminescence shift via formation of a doped organic crystal

Herein, we propose a new strategy to tune the magnitude of the mechanoresponsive shift of the maximum emission wavelength (Δλ_em). The Δλ_em of thienylbenzothiadiazole crystals has been extended to 69 nm by doping with a trace amount of dithienylbenzothiadiazole, whereas the pure crystal of thienylbenzothiadiazole exhibited a Δλ_em of 10 nm. This doping strategy should accelerate the development of advanced mechanosensing materials composed of organic crystals.

Modulating Room-Temperature Phosphorescence-To-Phosphorescence Mechanochromism by Halogen Exchange

Modulating the stimulus-responsiveness of a luminescent crystal is challenging owing to the complex interdependent nature of its controlling factors, such as molecular structure, molecular conformation, crystal packing, optical properties, and amorphization behavior. Herein, we demonstrate a halogen-exchange approach that disentangles this problem, thereby realizing the modulation of room-temperature phosphorescence-to-phosphorescence mechanochromism. Replacing the bromine atoms in a brominated thienyl diketone with chlorine atoms afforded isostructural crystals; i.e., molecules with different halogen atoms exhibited the same molecular conformation and crystal packing. Consequently, amorphization behavior toward mechanical stimulation was also the same, and the phosphorescence of amorphous states originated from the same conformer of each diketone. In contrast, the phosphorescence properties of each conformer were modulated differently, which is ascribable to heavy atom effects, resulting in the modulation of the mechanochromism. Thus, halogen exchange is a promising approach for modulating the stimulus-responsive photofunctions of crystals involving spin-forbidden processes.

Luminescent polymorphic crystals: mechanoresponsive and multicolor-emissive properties

Polymorphic organic crystals that can switch their photophysical properties in response to mechanical stimuli are highlighted.

Tuning the luminescence of transition metal complexes with acyclic diaminocarbene ligands

Organometallics featuring acyclic diaminocarbene ligands have recently emerged as powerful emitters for use in electroluminescent technologies.

Deformation-induced phosphorescence shift in a 2D elastically flexible organic single crystal: role of chalcogen-centered weak interactions

Mechanically responsive organic luminescent crystals are one of the promising choices of materials for flexible photonic devices. However, the change in phosphorescence emission as a function of the flexibility of a crystal has never been reported. Our current findings demonstrate two-dimensional (2D) and one-dimensional (1D) macroscopic elastic deformability, under mechanical stress, in elastically flexible single crystals of dibenzothiophene, and its brominated derivative, respectively. Unlike the presence of dual fluorescence (FL) and room temperature phosphorescence (RTP) in dibenzothiophene single crystals, the derivative was found to show only RTP. Interestingly, upon elastic deformation, single crystals of the dual emissive dibenzothiophene show a noticeable blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent). However, their FL peaks remain nearly unchanged irrespective of the crystal deformation. A hierarchy of structure-elastic functionality to RTP modulation has been quantitatively mapped by rationalizing the role of chalcogen-involved weak interactions.

In response to macroscopic elastical bending, single crystals of dual emissive dibenzothiophene depict a significant blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent).

Luminescent Behavior Elucidation of a Disilane-Bridged D-A-D Triad Composed of Phenothiazine and Thienopyrazine

A σ-π extended aryldisilane, comprising a thienopyrazine group as an acceptor fragment and phenothiazine groups as the donor moiety, has been prepared through the introduction of two Si-Si bridges (compound 1). X-ray diffraction analysis determined the crystal structure of 1, and experimental and theoretical approaches investigated its optical properties. Solvatochromic studies revealed the dual emission of 1 in all solvents tested. Compound 1 also exhibited fluorescence in the solid state upon excitation with a hand-held UV lamp, as well as mechanochromic luminescent properties. The packing mode in the crystal structure, variation of phenothiazine conformation, morphological changes between crystalline and amorphous phases are the major factors showing reversible fluorescence under external stimuli. A theoretical conformer study found that 1 exists in distinct conformational groups differing in Gibbs free energy by less than 3 kcal mol^-1 . The conformer in the crystalline state of 1 can promote the complete separation of the HOMO and LUMO between the phenothiazine donor and the thienopyrazine acceptor, linked by the disilane linker. HOMO-LUMO energy transition in the crystalline state is forbidden due to the lack of frontier orbital overlap. Crystalline state emission showed LUMO → HOMO-1 transition (locally excited (LE) state). In the amorphous state, the partial presence of quasi-axial conformers allows intramolecular charge-transfer type emission via energy transfer from dominant quasi-equatorial conformers. The strategy proposed in this work provides important guidance for developing stimuli-responsive materials with controlled excited states.

Mechanochromic Luminescence (MCL) of Purely Organic Two-Component Dyes: Wide-Range MCL over 300 nm and Two-Step MCL by Charge-Transfer Complexation

Despite recent extensive studies on mechanochromic luminescence (MCL), rational control over the magnitude of the emission-wavelength shift in response to mechanical stimuli remains challenging. In the present study, a two-component donor-acceptor approach has been applied to create a variety of organic MCL composites that exhibit remarkable emission-wavelength switching. Dibenzofuran-based bis(1-pyrenylmethyl)diamine and typical organic fluorophores have been employed as donor and acceptor dyes, respectively. Outstanding wide-range MCL with an emission-wavelength shift of over 300 nm has been achieved by mixing the diamine with 3,4,9,10-perylenetetracarboxylic diimide. Unprecedented two-step MCL in response to mechanical stimuli of different intensity has also been realized for a two-component mixture with 9,10-anthraquinone. Fluorescence microscopy observations at the single-particle level revealed that the segregation and mixing of the two-component dyes contribute to the stimuli-responsive emission-color switching of the MCL composites.

In Situ Exploration of Stimulus-Induced Emission Changes in Mechanochromic Dyes

The development of in situ analysis techniques for visualizing and linking macro- and nanoscopic features of external stimulus-responsive materials is crucial for their rational design and applications. Herein, we investigate the mechanical stress-induced emission changes in electron donor-acceptor type organic dye molecules in solid states through in situ single-particle fluorescence spectroscopy combined with macroscopic and nanoscopic stimulation systems. The change in emission color from green to yellow was attributed to repeated rubbing or scratching of the crystal surface, and not to simple cutting. This change was due to partial amorphization, which changed the intra- and intermolecular charge-transfer interactions of stacked molecules near the surface. We believe that this study will facilitate the efficient design of mechano-responsive materials with finely controlled and responsive properties.

Multi-color mechanochromic luminescence of three polymorphic crystals of a donor–acceptor-type benzothiadiazole derivative

The three polymorphic crystals of a donor–acceptor dye exhibited different luminescence colors, which changed in response to mechanical grinding.