Polyethylene Glycol Functionalized Silicon Nanowire Field-Effect Transistor Biosensor for Glucose Detection

Accurate monitoring of blood glucose levels is crucial for the diagnosis of diabetes patients. In this paper, we proposed a simple "mixed-catalyzer layer" modified silicon nanowire field-effect transistor biosensor that enabled direct detection of glucose with low-charge in high ionic strength solutions. A stable screening system was established to overcome Debye screening effect by forming a porous biopolymer layer with polyethylene glycol (PEG) modified on the surface of SiNW. The experimental results show that when the optimal ratio (APTMS:silane-PEG = 2:1) modified the surface of silicon nanowires, glucose oxidase can detect glucose in the concentration range of 10 nM to 10 mM. The sensitivity of the biosensor is calculated to be 0.47 μAcm^-2mM^-1, its fast response time not exceeding 8 s, and the detection limit is up to 10 nM. This glucose sensor has the advantages of high sensitivity, strong specificity and fast real-time response. Therefore, it has a potential clinical application prospect in disease diagnosis.

Layer-by-Layer Assembly: Recent Progress from Layered Assemblies to Layered Nanoarchitectonics

As an emerging concept for the development of new materials with nanoscale features, nanoarchitectonics has received significant recent attention. Among the various approaches that have been developed in this area, the fixed-direction construction of functional materials, such as layered fabrication, offers a helpful starting point to demonstrate the huge potential of nanoarchitectonics. In particular, the combination of nanoarchitectonics with layer-by-layer (LbL) assembly and a large degree of freedom in component availability and technical applicability would offer significant benefits to the fabrication of functional materials. In this Minireview, recent progress in LbL assembly is briefly summarized. After introducing the basics of LbL assembly, recent advances in LbL research are discussed, categorized according to physical, chemical, and biological innovations, along with the fabrication of hierarchical structures. Examples of LbL assemblies with graphene oxide are also described to demonstrate the broad applicability of LbL assembly, even with a fixed material.

C3-C3' and C6-C6' Oxidative Couplings of Carbazoles

9-Substituted carbazoles are widely used units in materials science, and their oxidative reactions have been utilized for the synthesis and characterization of polymers. Though the oxidative mechanism of carbazoles has been known for a few decades, structural definition has remained difficult, because their polymers are generally insoluble with incomplete characterization and unknown dependence of the electrochemical potentials. The oxidative reactions of 9-substituted carbazoles should be carefully considered under specific oxidative conditions; otherwise, structure definitions could be wrong, because the IR and NMR spectra used previously cannot quantitatively analyze 3,3'-coupling and 6,6'-coupling of carbazoles. In this review, the best understanding of the C3-C3' and C6-C6' oxidative couplings of 9-substituted carbazoles is presented, and the benefit of these oxidative reactions from the viewpoints of electrochemical synthesis, film engineering, and the synthesis and processing of polymers is highlighted.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.

Electroreductive Coupling Layer-by-Layer Assembly

Rapid and covalent layer-by-layer (LbL) assembly is of significance for practical applications because of superior chemical and mechanical stability. The electrochemical LbL assembly via an accelerating trigger can be automated and programmable in response to electrical signals to in situ fabricate covalently layered thin films with chemical and mechanical stability. In this paper, electroreductive coupling layer-by-layer assembly is introduced as both covalent and rapid methodology for preparing layered thin films. This assembly is triggered by C-C coupling of peripheral alkynyls, which have own absorption below 300 nm and can transform to optical and electrical inert double/single or triple/single alternative bonding formations significantly without optical or electric alternations of desirable photoelectric building blocks, superior to other linkers among covalent LbL assemblies. Not limited to fabrication of optical thin films, this assembly is readily available for oxygen sensitive substrates or materials and also a powerful addition to electrooxidative coupling LbL assembly for developing the economically dynamoelectric LbL machines without moving or changing experimental gears.

Review of Electrochemically Triggered Macromolecular Film Buildup Processes and Their Biomedical Applications

Macromolecular coatings play an important role in many technological areas, ranging from the car industry to biosensors. Among the different coating technologies, electrochemically triggered processes are extremely powerful because they allow in particular spatial confinement of the film buildup up to the micrometer scale on microelectrodes. Here, we review the latest advances in the field of electrochemically triggered macromolecular film buildup processes performed in aqueous solutions. All these processes will be discussed and related to their several applications such as corrosion prevention, biosensors, antimicrobial coatings, drug-release, barrier properties and cell encapsulation. Special emphasis will be put on applications in the rapidly growing field of biosensors. Using polymers or proteins, the electrochemical buildup of the films can result from a local change of macromolecules solubility, self-assembly of polyelectrolytes through electrostatic/ionic interactions or covalent cross-linking between different macromolecules. The assembly process can be in one step or performed step-by-step based on an electrical trigger affecting directly the interacting macromolecules or generating ionic species.

Nanoarchitectonics for Dynamic Functional Materials from Atomic-/Molecular-Level Manipulation to Macroscopic Action

Objects in all dimensions are subject to translational dynamism and dynamic mutual interactions, and the ability to exert control over these events is one of the keys to the synthesis of functional materials. For the development of materials with truly dynamic functionalities, a paradigm shift from "nanotechnology" to "nanoarchitectonics" is proposed, with the aim of design and preparation of functional materials through dynamic harmonization of atomic-/molecular-level manipulation and control, chemical nanofabrication, self-organization, and field-controlled organization. Here, various examples of dynamic functional materials are presented from the atom/molecular-level to macroscopic dimensions. These systems, including atomic switches, molecular machines, molecular shuttles, motional crystals, metal-organic frameworks, layered assemblies, gels, supramolecular assemblies of biomaterials, DNA origami, hollow silica capsules, and mesoporous materials, are described according to their various dynamic functions, which include short-term plasticity, long-term potentiation, molecular manipulation, switchable catalysis, self-healing properties, supramolecular chirality, morphological control, drug storage and release, light-harvesting, mechanochemical transduction, molecular tuning molecular recognition, hand-operated nanotechnology.

Bioinspired nanoarchitectonics as emerging drug delivery systems

Bioinspired nanoarchitectonics opens a new era for designing drug delivery systems.

Fabrication of both the photoactive layer and the electrode by electrochemical assembly: towards a fully solution-processable device

We report an economical route to achieve an all-solution and vacuum-deposition free device under normal atmospheric pressure for fabrication of both the photoactive layer and the electrode.

25th anniversary article: what can be done with the Langmuir-Blodgett method? Recent developments and its critical role in materials science

The Langmuir-Blodgett (LB) technique is known as an elegant method for fabrication of well-defined layered structures with molecular level precision. Since its discovery the LB method has made an indispensable contribution to surface science, physical chemistry, materials chemistry and nanotechnology. However, recent trends in research might suggest the decline of the LB method as alternate methods for film fabrication such as layer-by-layer (LbL) assembly have emerged. Is LB film technology obsolete? This review is presented in order to challenge this preposterous question. In this review, we summarize recent research on LB and related methods including (i) advanced design for LB films, (ii) LB film as a medium for supramolecular chemistry, (iii) LB technique for nanofabrication and (iv) LB involving advanced nanomaterials. Finally, a comparison between LB and LbL techniques is made. The latter reveals the crucial role played by LB techniques in basic surface science, current advanced material sciences and nanotechnologies.

Interfacial nanoarchitectonics: lateral and vertical, static and dynamic

The exploration of nanostructures and nanomaterials is essential to the development of advanced functions. For such innovations, nanoarchitectonics has been proposed as a novel paradigm of nanotechnology aimed at assembling nanoscale structural units into predesigned configurations or arrangements. In this Feature Article, we provide an overview of several recent research works from the viewpoint of interfacial nanoarchitectonics with features developed in lateral directions or grown in vertical directions with construction on solid, static, or flexible dynamic surfaces. Lateral nanoarchitectonics at a static interface provides molecular organization by bottom-up nanoarchitectonics and can also be used to realize device integration by top-down nanoarchitectonics. In particular, in the latter case, the fabrication of novel devices, so-called atomic switches, are introduced as a demonstration of atomic-level electronics. Lateral nanoarchitectonics at dynamic interfaces is exemplified by 2D molecular patterning and molecular machine operation induced by macroscopic motion. The dynamic nature of interfaces enables us to operate molecular-sized machines by macroscopic mechanical stimuli such as our hand motion, which we refer to as hand-operated nanotechnology. Vertical nanoarchitectonics is mainly discussed in relation to layer-by-layer (LbL) assembly. By using this technique, we can assemble a variety of functional materials in ultrathin film structures of defined thickness and layer sequence. The organization of biomolecules (or even living cells) within thin films and their integration with device structures is exemplified. Finally, the anticipated research directions of interfacial nanoarchitectonics are described.

Paradigm shift from self-assembly to commanded assembly of functional materials: recent examples in porphyrin/fullerene supramolecular systems

Current nanotechnology based on top-down nanofabrication may encounter a variety of drawbacks in the near future so that development of alternative methods, including the so-called bottom-up approach, has attracted considerable attention. However, the bottom-up strategy, which often relies on spontaneous self-assembly, might be inefficient in the development of the requisite functional materials and systems. Therefore, assembly processes controlled by external stimuli might be a plausible strategy for the development of bottom-up nanotechnology. In this review, we demonstrate a paradigm shift from self-assembly to commanded assembly by describing several examples of assemblies of typical functional molecules, i.e. porphyrins and fullerenes. In the first section, we describe recent progress in the design and study of self-assembled and co-assembled supramolecular architectures of porphyrins and fullerenes. Then, we show examples of assembly induced by external stimuli. We emphasize the paradigm shift from self-assembly to commanded assembly by describing the recently developed electrochemical-coupling layer-by-layer (ECC-LbL) methodology.