Facile dissolution of cellulose by superbase-derived ionic liquid using organic solvents as co-solvents at mild temperatures

Dissolving cellulose at low temperatures is a key step in its efficient utilization as a renewable resource to produce high-value-added platform chemicals and high-performance materials. Here, the potential of four aprotic organic solvents was investigated for use as co-solvents with a sustainable DBU-derived ionic liquid (SIL) for the low-temperature dissolution and regeneration of cellulose. Combined experiments, density functional theory calculations, and molecular dynamic simulations were performed. The type and amount of co-solvent were found to have a significant impact on the solubility of cellulose, the dissolution process, and the structure of regenerated cellulose. The addition of organic solvents can significantly reduce the cellulose dissolution temperature and increase the solubility. Among the solvents assessed, 40 wt% DMSO exhibited the most effective synergistic interaction with SIL, where the solubility of cellulose was 14.6 wt% at 75 °C. Subsequently, the effects of the different types and amounts of co-solvents on the microscopic morphology and chemical structure of regenerated cellulose were thoroughly explored. The results showed that different types of organic solvents had different effects on the microstructure of regenerated cellulose. The results may guide the manufacturing specifications of high-performance regenerated fiber materials.

Lignosulfonate-Based Ionic Liquids as Asphaltene Dispersants

Asphaltenes are recognized as being troublesome from upstream to downstream in the oil industry due to their tendency to precipitate and self-associate. Their extraction from asphaltenic crude oil for a cost-effective refining process is a crucial and critical challenge in the oil and gas sector. Lignosulfonate (LS), as a by-product of the wood pulping process in the papermaking industry, is a highly available and underutilized feedstock. This study aimed to synthesize novel LS-based ionic liquids (ILs) by reacting lignosulfonate acid sodium salt [Na]₂[LS] with different alkyl chains of piperidinium chloride for asphaltene dispersion. The synthesized ILs, 1-hexyl-1-methyl-piperidinium lignosulfonate [C₆C₁Pip]₂[LS], 1-octyl-1-methyl-piperidinium lignosulfonate [C₈C₁Pip]₂[LS], 1-dodecyl-1-methyl-piperidinium lignosulfonate [C₁₂C₁Pip]₂[LS] and 1-hexadecyl-1-methyl-piperidinium lignosulfonate [C₁₆C₁Pip]₂[LS] were characterized using FTIR-ATR and ¹H NMR for functional groups and structural confirmation. The ILs depicted high thermal stability because of the presence of a long side alkyl chain and piperidinium cation following thermogravimetric analysis (TGA). Asphaltene dispersion indices (%) of ILs were tested by varying contact time, temperature and ILs concentration. The obtained indices were high for all ILs, with a dispersion index of more than 91.2% [C₁₆C₁Pip]₂[LS], representing the highest dispersion at 50,000 ppm. It was able to lower asphaltene particle size diameter from 51 nm to 11 nm. The kinetic data of [C₁₆C₁Pip]₂[LS] were consistent with the pseudo-second-order kinetic model. The dispersion index (%), asphaltene particle growth and the kinetic model agreed with the molecular modeling studies of the HOMO-LUMO energy of IL holds.

Production of rayon fibres from cellulosic pulps: State of the art and current developments

The increasing demand for cellulosic fibres is continuously driven by the growing earth population and requirements of the textile industry. The annual cotton production of ca. 25 million tons is no longer enough to meet the market demands. This market gap of cellulosic fibres is progressively filled by regenerated cellulosic fibres derived from the dissolving pulp. The conventional industrial process of viscose production is far from being environmentally friendly due to the use of hazardous reagents. Alternatively, new trends in the production of regenerated fibres are related to the direct dissolution of cellulose in appropriate environmentally sound recyclable solvents, allowing high quality rayon fibres. This article reviews the sources of dissolving pulps used for the production of viscose and its quality parameters related to the performance of viscose production. The prospective cellulose regeneration processes, both commercialized and under development, are reviewed regarding current and future developments in the area.

Recent Advances in Solvents for the Dissolution, Shaping and Derivatization of Cellulose: Quaternary Ammonium Electrolytes and their Solutions in Water and Molecular Solvents

There is a sustained interest in developing solvents for physically dissolving cellulose, i.e., without covalent bond formation. The use of ionic liquids, ILs, has generated much interest because of their structural versatility that results in efficiency as cellulose solvents. Despite some limitations, imidazole-based ILs have received most of the scientific community’s attention. The objective of the present review is to show the advantages of using quaternary ammonium electrolytes, QAEs, including salts of super bases, as solvents for cellulose dissolution, shaping, and derivatization, and as a result, increase the interest in further investigation of these important solvents. QAEs share with ILs structural versatility; many are liquids at room temperature or are soluble in water and molecular solvents (MSs), in particular dimethyl sulfoxide. In this review we first give a historical background on the use of QAEs in cellulose chemistry, and then discuss the common, relatively simple strategies for their synthesis. We discuss the mechanism of cellulose dissolution by QAEs, neat or as solutions in MSs and water, with emphasis on the relevance to cellulose dissolution efficiency of the charge and structure of the cation and. We then discuss the use of cellulose solutions in these solvents for its derivatization under homogeneous and heterogeneous conditions. The products of interest are cellulose esters and ethers; our emphasis is on the role of solvent and possible side reactions. The final part is concerned with the use of cellulose dopes in these solvents for its shaping as fibers, a field with potential commercial application.

Dimethyl sulfoxide enhances both the cellulose dissolution ability and biocompatibility of a carboxylate-type liquid zwitterion

The cellulose dissolution ability and biocompatibility of a liquid zwitterion, the most biocompatible cellulose solvent, were further improved by adding dimethylsulfoxide.

Combining random walk and regression models to understand solvation in multi-component solvent systems

Polysaccharides, such as cellulose, are often processed by dissolution in solvent mixtures, e.g. an ionic liquid (IL) combined with a dipolar aprotic co-solvent (CS) that the polymer does not dissolve in. A multi-walker, discrete-time, discrete-space 1-dimensional random walk can be applied to model solvation of a polymer in a multi-component solvent mixture. The number of IL pairs in a solvent mixture and the number of solvent shells formable, x, is associated with n, the model time-step, and N, the number of random walkers. The mean number of distinct sites visited is proportional to the amount of polymer soluble in a solution. By also fitting a polynomial regression model to the data, we can associate the random walk terms with chemical interactions between components and probe where the system deviates from a 1-D random walk. The 'frustration' between solvents shells is given as ln x in the random walk model and as a negative IL:IL interaction term in the regression model. This frustration appears in regime II of the random walk model (high volume fractions of IL) where walkers interfere with each other, and the system tends to its limiting behaviour. In the low concentration regime, (regime I) the solvent shells do not interact, and the system depends only on IL and CS terms. In both models (and both regimes), the system is almost entirely controlled by the volume available to solvation shells, and thus is a counting/space-filling problem, where the molar volume of the CS is important. Small deviations are observed when there is an IL-CS interaction. The use of two models, built on separate approaches, confirm these findings, demonstrating that this is a real effect and offering a route to identifying such systems. Specifically, the majority of CSs - such as dimethylformide - follow the random walk model, whilst 1-methylimidazole, dimethyl sulfoxide, 1,3-dimethyl-2-imidazolidinone and tetramethylurea offer a CS-mediated improvement and propylene carbonate results in a CS-mediated hindrance. It is shown here that systems, which are very complex at a molecular level, may, nonetheless, be effectively modelled as a simple random walk in phase-space. The 1-D random walk model allows prediction of the ability of solvent mixtures to dissolve cellulose based on only two dissolution measurements (one in neat IL) and molar volume.

Neural networks applied to determine the thermophysical properties of amino acid based ionic liquids

A series of models based on artificial neural networks (ANNs) have been designed to estimate the thermophysical properties of different amino acid-based ionic liquids (AAILs).