Enhancing mucoadhesion: Exploring rheological parameters and texture profile in starch solutions, with emphasis on micro-nanofiber influence

This comprehensive analysis explores the rheological parameters and texture profile analysis (TPA) to effect starch solutions for mucoadhesion and assess the impact of micro-nanofibers (MNFs) on these parameters. The surface chemistry of all six samples was examined through the Fourier transform infrared (FTIR) technique. The spectrum of FTIR was recorded in the range of 500-4000 cm-1. The viscosity of different pHs (2-11) and temperatures (20-70 °C) of verious starches, potato, corn, and rice, decreased with the increasing of shear rate, exhibiting shear thinning behavior, which conformed to pseudoplastic fluid.The combination of chitosan and collagen MNFs significantly changed rheological properties, and the sample with the addtion of 1500 µL CC-MNF exhibited a greater viscosity of 59.8 mPa·s at a shear rate of 1.49 s-1. Potato starch emerged as a strong candidate for mucoadhesion due to its low hardness (4.62 ± 0.31 N), high adhesion (0.0322 ± 0.0053 mJ), cohesiveness (0.37 ± 0.03 Ratio), low chewiness (0.66 ± 0.12 mJ), and gumminess (1.69 ± 0.23 N). The inclusion of MNFs, especially collagen/chitosan MNFs showed the potential to further enhance adhesion.

From seaweed to healing: the potential of fucoidan in wound therapy

This bibliometric review examines the current state of research on fucoidan, a sulphated polysaccharide found in brown seaweed species, and its potential for wound healing. The review included 58 studies that investigated fucoidan's effects on wound healing, revealing that it possesses anti-inflammatory and antioxidant properties that could aid in the healing process. Fucoidan was also found to promote cell proliferation, migration, and angiogenesis, essential for wound healing. However, the optimal dosage, treatment duration, safety, and efficacy of fucoidan in various wound types and patient populations still require further investigation. Additionally, advanced wound dressings like hydrogels have garnered significant attention for their potential in wound healing. While this review indicates promise for fucoidan as a natural wound healing compound, it underscores the need for additional clinical trials to determine its optimal use as a commercial therapeutic agent in wound healing.

Marine polysaccharides: Biological activities and applications in drug delivery systems

The ocean is the common home of a large number of marine organisms, including plants, animals, and microorganisms. Researchers can extract thousands of important bioactive components from the oceans and use them extensively to treat and prevent diseases. In contrast, marine polysaccharide macromolecules such as alginate, carrageenan, Laminarin, fucoidan, chitosan, and hyaluronic acid have excellent physicochemical properties, good biocompatibility, and high bioactivity, which ensures their wide applications and strong therapeutic potentials in drug delivery. Drug delivery systems (DDS) based on marine polysaccharides and modified marine polysaccharide molecules have emerged as an innovative technology for controlling drug distribution on temporal, spatial, and dosage scales. They can detect and respond to external stimuli such as pH, temperature, and electric fields. These properties have led to their wide application in the design of novel drug delivery systems such as hydrogels, polymeric micelles, liposomes, microneedles, microspheres, etc. In addition, marine polysaccharide-based DDS not only have smart response properties but also can combine with the unique biological properties of the marine polysaccharide base to exert synergistic therapeutic effects. The biological activities of marine polysaccharides and the design of marine polysaccharide-based DDS are reviewed. Marine polysaccharide-based responsive DDS are expected to provide new strategies and solutions for disease treatment.

Fucoidan/chitosan hydrogels as carrier for sustained delivery of platelet-rich fibrin containing bioactive molecules

Platelet-rich fibrin (PRF), derived from human blood, rich in wound healing components, has drawbacks in direct injections, such as rapid matrix degradation and growth factor release. Marine polysaccharides, mimicking the human extracellular matrix, show promising potential in tissue engineering. In this study, we impregnated the self-assembled fucoidan/chitosan (FU_CS) hydrogels with PRF obtaining PRF/FU_CS hydrogels. Our objective was to analyze the properties of a hydrogel and the sustained release of growth factors from the hydrogel that incorporates PRF. The results of SEM and BET-BJH demonstrated the relatively porous nature of the FU_CS hydrogels. ELISA data showed that combining FU_CS hydrogel with PRF led to a gradual 7-day sustained release of growth factors (VEGF, EGF, IL-8, PDGF-BB, TGF-β1), compared to pure PRF. Histology confirmed ELISA data, demonstrating uniform PRF fibrin network distribution within the FU_CS hydrogel matrix. Furthermore, the FU_CS hydrogels revealed excellent cell viability. The results revealed that the PRF/FU_CS hydrogel has the potential to promote wound healing and tissue regeneration. This would be the first step in the search for improved growth factor release.

Preparation and characterization of a nanohydroxyapatite and sodium fluoride loaded chitosan-based in situ forming gel for enamel biomineralization

The development of remineralizing smart biomaterials is a contemporary approach to caries prevention. The present study aimed at formulation preparation and characterization of a thermoresponsive oral gel based on poloxamer and chitosan loaded with sodium fluoride (NaF) and nanohydroxyapatite (nHA) to treat demineralization. The chemical structure and morphology of the formulation were characterized using FTIR and FESEM-EDS tests. Hydrogel texture, rheology, and stability were also examined. The hydrogel was in a sol state at room temperature and became gel after being placed at 37 °C with no significance different in gelation time with the formulation without nHA and NaF as observed by t-test. The FTIR spectrum of nHA/NaF/chitosan-based hydrogel indicated the formation of physical crosslinking without any chemical interactions between the hydrogel components. The FESEM-EDS results demonstrated the uniform distribution of each element within the hydrogel matrix, confirming the successful incorporation of nHA and NaF in the prepared gel. The hardness, hydrogel's adhesiveness, and cohesiveness were 0.9 mJ, 1.7 mJ, and 0.37, respectively, indicating gel stability and the acceptable retention time of hydrogels. The formulation exhibited a non-Newtonian shear-thinning pseudoplastic and thixotropic behavior with absolute physical stability. Within the limitation of in vitro studies, nHA/NaF/chitosan-based in situ forming gel demonstrated favorable properties, which could be trasnsorm into a gel state in oral cavity due to poloxamer and chitosan and can prevent dental caries due to nHA and NaF. We propose this formulation as a promising dental material in tooth surface remineralization.

Evaluation of Osteogenic Potential of Fucoidan Containing Chitosan Hydrogel in the Treatment of Periodontal Intra-Bony Defects-A Randomized Clinical Trial

Periodontal diseases significantly impact about half of the global population, and their treatment often encompasses relieving symptoms as well as regenerating the destroyed tissues. Revolutionary research in the management of periodontal disease includes biomaterials, a boon to re-generative dentistry owing to their excellent biological properties: non-toxicity, anti-inflammatory, biocompatibility, biodegradability, and adhesion. This study aimed to fabricate an injectable fucoidan containing chitosan hydrogel and prove its effectiveness in periodontal bone regeneration. The injectable hydrogel was prepared using the sol-gel method and was subjected to various physical, chemical, and biological characterizations to understand its efficacy in formation of new bone. The effectiveness of the developed hydrogel was assessed in periodontal bony defects to study the soft and hard tissue changes. A total of 40 periodontitis patients with bony defects were recruited and randomized into two groups to receive fucoidan-chitosan hydrogel and concentrated growth factor, respectively. Customized acrylic stents were used to guide the hydrogel placement into the defect site. Post-surgical changes in clinical parameters were assessed at 3, 6, and 9 months to appreciate the soft and hard tissue changes using repeated measures analysis of variance and Bonferroni's post hoc test. Significance was kept at 5%. The porosity, water uptake of the prepared hydrogel showed good efficacy, with particle size of the fucoidan containing chitosan hydrogel of 6.000 nm. The MG-63 osteoblasts cell line revealed biocompatibility, biodegradability and showed slow and sustained drug release, increased cell proliferation, and enhanced alkaline phosphatase secretion. Mineralization assay was greatest in the fucoidan containing chitosan hydrogel. Clinically, it exhibited significantly lower probing depth values and a higher mean improvement in clinical attachment level as compared to the concentrated growth factor (CGF) group at the end of 3 and 6 months (p < 0.05). The mean of the defect fills in the fucoidan containing chitosan group was 1.20 at the end of 9 months (p < 0.001) as compared with defect fills observed in the CGF group. The presence of fucoidan in the hydrogel significantly contributed to bone regeneration in humans, thus strengthening its potential in tissue engineering. Fucoidan-chitosan will be a promising biomaterial for bone tissue regeneration.

Design, optimization and characterization of a novel antibacterial chitosan-based hydrogel dressing for promoting blood coagulation and full-thickness wound healing: A biochemical and biophysical study

The use of hydrogel dressings has become increasingly popular as a scaffold for skin tissue engineering. Herein, we have developed an innovative wound dressing using chitosan, fibrinogen, nisin, and EDTA as an effective antibacterial scaffold for wound treatment. The structural and functional characteristics of the hydrogel, including morphology, mechanical strength, drug encapsulation and release, swelling behaviors, blood coagulation, cytotoxicity, and antibacterial activity, were studied. Spectroscopic studies indicated that the attachment of chitosan to fibrinogen is associated with minimal change in its secondary structure; subsequently, at higher temperatures, it is expected to preserve fibrinogen's conformational stability. Mechanical and blood coagulation analyses indicated that the incorporation of fibrinogen into the hydrogel resulted in accelerated clotting and enhanced mechanical properties. Our cell studies showed biocompatibility and non-toxicity of the hydrogel along with the promotion of cell migration. In addition, the prepared hydrogel indicated an antibacterial behavior against both Gram-positive and Gram-negative bacteria. Interestingly, the in vivo data revealed enhanced tissue regeneration and recovery within 17 days in the studied animals. Taken together, the results obtained from in vitro and histological assessments indicate that this innovatively designed hydrogel shows good potential as a candidate for wound healing.

Release kinetics modelling and in vivo-vitro, shelf-life study of resveratrol added composite transdermal scaffolds

In this article, the suitability of composite transdermal biomaterial for wound dressing applications is discussed. Bioactive, antioxidant Fucoidan and Chitosan biomaterials were doped into polyvinyl alcohol/β-tricalcium phosphate based polymeric hydrogels loaded with Resveratrol, which has theranostic properties, and biomembrane design with suitable cell regeneration properties was aimed. In accordance with this purpose, tissue profile analysis (TPA) was performed for the bioadhesion properties of composite polymeric biomembranes. Fourier Transform Infrared Spectrometry (FT-IR), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM-EDS) analyses were performed for morphological and structural analyses of biomembrane structures. In vitro Franz diffusion mathematical modelling of composite membrane structures, biocompatibility (MTT test) and in vivo rat tests were performed. TPA analysis of resveratrol loaded biomembrane scaffold design; compressibility; 13.4 ± 1.9(g.s), hardness; 16.8 ± 1(g), adhesiveness; -11 ± 2.0(g.s), elasticity; 0.61 ± 0.07, cohesiveness; 0.84 ± 0.04 were found. Proliferation of the membrane scaffold was 189.83 % at 24 h and 209.12 % at 72 h. In the in vivo rat test; at the end of 28th day, it was found that biomembrane_3 provided 98.75 ± 0.12 % wound shrinkage. The shelf-life of RES in the transdermal membrane scaffold, which was determined as Zero order according to Fick's law in in vitro Franz diffusion mathematical modelling, was found to be approximately 35 days by Minitab statistical analysis. The importance of this study is that the innovative and novel transdermal biomaterial supports tissue cell regeneration and cell proliferation in theranostic applications as a wound dressing.

Preparation of a multifunctional non-stick tamarind polysaccharide-polyvinyl alcohol hydrogel immobilized with a quorum quenching enzyme for maintaining fish freshness

Hydrogels have become promising materials for food packaging due to their unique microstructure. However, hydrogel materials suitable for seafood preservation have rarely been reported. In this study, a tamarind polysaccharide-polyvinyl alcohol hydrogel with the ability to maintain seafood freshness was prepared and characterized. The hydrogel possesses quick self-healing, good tissue fitting, and freezing tolerance capability. Moreover, a peeling force of only 0.1 N between the hydrogel and the fillet tissue confirmed the non-stick properties. The FTIR characteristic peak at 1600 cm^-1 and 1450 cm^-1 proved the ester bond-based chemical cross-linking of the hydrogel. Release profiles at pH 6.0 to 8.0 verified the pH-responsive release of quorum-quenching (QQ) enzymes over 120 h, which enabled the hydrogel to achieve biofilm and protease inhibitory activities. In vivo spoilage tests showed that the shelf life of hydrogel-coated red snapper fillets was extended by >3 days. These results illustrate the potential of the prepared hydrogel as functional packaging for seafood preservation.

Fucoidan in Pharmaceutical Formulations: A Comprehensive Review for Smart Drug Delivery Systems

Fucoidan is a heterogeneous group of polysaccharides isolated from marine organisms, including brown algae and marine invertebrates. The physicochemical characteristics and potential bioactivities of fucoidan have attracted substantial interest in pharmaceutical industries in the past few decades. These polysaccharides are characterized by possessing sulfate ester groups that impart negatively charged surfaces, low/high molecular weight, and water solubility. In addition, various promising bioactivities have been reported, such as antitumor, immunomodulatory, and antiviral effects. Hence, the formulation of fucoidan has been investigated in the past few years in diverse pharmaceutical dosage forms to be able to reach their site of action effectively. Moreover, they can act as carriers for various drugs in value-added drug delivery systems. The current work highlights the attractive biopharmaceutical properties of fucoidan being formulated in oral, inhalable, topical, injectable, and other advanced formulations treating life-quality-affecting diseases. Therefore, the present work points out the current status of fucoidan pharmaceutical formulations for future research transferring their application from in vitro and in vivo studies to clinical application and market availability.

Gene-Expression Analysis of Human Fibroblasts Affected by 3D-Printed Carboxylated Nanocellulose Constructs

Three-dimensional (3D) printing has emerged as a highly valuable tool to manufacture porous constructs. This has major advantages in, for example, tissue engineering, in which 3D scaffolds provide a microenvironment with adequate porosity for cell growth and migration as a simulation of tissue regeneration. In this study, we assessed the suitability of three cellulose nanofibrils (CNF) that were obtained through 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO)-mediated oxidation. The CNFs were obtained by applying three levels of carboxylation, i.e., 2.5, 3.8, and 6.0 mmol sodium hypochlorite (NaClO) per gram of cellulose. The CNFs exhibited different nanofibrillation levels, affecting the corresponding viscosity and 3D printability of the CNF gels (0.6 wt%). The scaffolds were manufactured by micro-extrusion and the nanomechanical properties were assessed with nanoindentation. Importantly, fibroblasts were grown on the scaffolds and the expression levels of the marker genes, which are relevant for wound healing and proliferation, were assessed in order to reveal the effect of the 3D-scaffold microenvironment of the cells.

Fucoidan-based hydrogels particles as versatile carriers for diabetes treatment strategies

There is a current lack of fully efficient therapies for diabetes mellitus, a chronic disease where the metabolism of blood glucose is severely hindered by a deficit in insulin or cell resistance to this hormone. Therefore, it is crucial to develop new therapeutic strategies to treat this disease, including devices for the controlled delivery of insulin or encapsulation of insulin-producing cells. In this work, fucoidan (Fu) - a marine sulfated polysaccharide exhibiting relevant properties on reducing blood glucose and antioxidant and anti-inflammatory effects - was used for the development of versatile carriers envisaging diabetes advanced therapies. Fu was functionalized by methacrylation (MFu) using 8% and 12% (v/v) of methacrylic anhydride and further photocrosslinked using visible light in the presence of triethanolamine and eosin-y to produce hydrogel particles. Degree of methacrylation varied between 2.78 and 6.50, as determined by ¹HNMR, and the produced particles have an average diameter ranging from 0.63 to 1.3 mm (dry state). Insulin (5%) was added to MFu solution to produce drug-loaded particles and the release profile was assessed in phosphate buffer solution (PBS) and simulated intestinal fluid (SIF) for 24 h. Insulin was released in a sustained manner during the initial 8 h, reaching then a plateau, higher in PBS than in SIF, indicating that lower pH favors drug liberation. Moreover, the ability of MFu particles to serve as templates for the culture of human pancreatic cells was assessed using 1.1B4 cell line during up to 7 days. During the culture period studied, pancreatic beta cells were proliferating, with a global viability over 80% and tend to form pseudo-islets, thus suggesting that the proposed biomaterial could be a good candidate as versatile carrier for diabetes treatment as they sustain the release of insulin and support pancreatic beta cells viability.

Fabrication and Characterization of Chicken- and Bovine-Derived Chondroitin Sulfate/Sodium Alginate Hybrid Hydrogels

The physicochemical properties and microstructure of hybrid hydrogels prepared using sodium alginate (SA) and chondroitin sulfate (CS) extracted from two animal sources were investigated. SA-based hybrid hydrogels were prepared by mixing chicken- and bovine-derived CS (CCS and BCS, respectively) with SA at 1/3 and 2/3 (w/w) ratios. The results indicated that the evaporation water loss rate of the hybrid hydrogels increased significantly upon the addition of CS, whereas CCS/SA (2/3) easily absorbed moisture from the environment. The thermal stability of the BCS/SA (1/3) hybrid hydrogel was higher than that of CCS/SA (1/3) hybrid hydrogel, whereas the hardness and adhesiveness of the CCS/SA (1/3) hybrid hydrogel were lower and higher, respectively, than those of the BCS/SA (1/3) hybrid hydrogel. Low-field nuclear magnetic resonance experiments demonstrated that the immobilized water content of the CCS/SA (1/3) hybrid hydrogel was higher than that of the BCS/SA (1/3) hybrid hydrogel. FTIR showed that S=O characteristic absorption peak intensity of BCS/SA (2/3) was obviously higher, suggesting that BCS possessed more sulfuric acid groups than CCS. SEM showed that the hybrid hydrogels containing CCS have more compact porous microstructure and better interfacial compatibility compared to BCS.

Fucoidan from Marine Macroalgae: Biological Actions and Applications in Regenerative Medicine, Drug Delivery Systems and Food Industry

The marine macroalgae produce a collection of bioactive polysaccharides, of which the sulfated heteropolysaccharide fucoidan produced by brown algae of the class Phaeophyceae has received worldwide attention because of its particular biological actions that confer nutritional and health benefits to humans and animals. The biological actions of fucoidan are determined by their structure and chemical composition, which are largely influenced by the geographical location, harvest season, extraction process, etc. This review discusses the structure, chemical composition and physicochemical properties of fucoidan. The biological action of fucoidan and its applications for human health, tissue engineering, regenerative medicine and drug delivery are also addressed. The industrial scenario and prospects of research depicted would give an insight into developing fucoidan as a commercially viable and sustainable bioactive material in the nutritional and pharmacological sectors.

Fucoidan-based nanomaterial and its multifunctional role for pharmaceutical and biomedical applications

Fucoidans are promising sulfated polysaccharides isolated from marine sources that have piqued the interest of scientists in recent years due to their widespread use as a bioactive substance. Bioactive coatings and films, unsurprisingly, have seized these substances to create novel, culinary, therapeutic, and diagnostic bioactive nanomaterials. The applications of fucoidan and its composite nanomaterials have a wide variety of food as well as pharmacological properties, including anti-oxidative, anti-inflammatory, anti-cancer, anti-thrombic, anti-coagulant, immunoregulatory, and anti-viral properties. Blends of fucoidan with other biopolymers such as chitosan, alginate, curdlan, starch, etc., have shown promising coating and film-forming capabilities. A blending of biopolymers is a recommended approach to improve their anticipated properties. This review focuses on the fundamental knowledge and current development of fucoidan, fucoidan-based composite material for bioactive coatings and films, and their biological properties. In this article, fucoidan-based edible bioactive coatings and films expressed excellent mechanical strength that can prolong the shelf-life of food products and maintain their biodegradability. Additionally, these coatings and films showed numerous applications in the biomedical field and contribute to the economy. We hope this review can deliver the theoretical basis for the development of fucoidan-based bioactive material and films.

Novel Photo- and Thermo-Responsive Nanocomposite Hydrogels Based on Functionalized rGO and Modified SIS/Chitosan Polymers for Localized Treatment of Malignant Cutaneous Melanoma

Melanoma is an aggressive type of skin cancer that accounts for over 75% of skin cancer deaths despite comprising less than 5% of all skin cancers. Despite promising improvements in surgical approaches for melanoma resection, the survival of undetectable microtumor residues has remained a concern. As a result, hyperthermia- and drug-based therapies have grown as attractive techniques to target and treat cancer. In this work, we aim to develop a stimuli-responsive hydrogel based on chitosan methacrylate (ChiMA), porcine small intestine submucosa methacrylate (SISMA), and doxorubicin-functionalized reduced graphene oxide (rGO-DOX) that eliminates microtumor residues from surgically resected melanoma through the coupled effect of NIR light-induced photothermal therapy and heat-induced doxorubicin release. Furthermore, we developed an in silico model to optimize heat and mass transport and evaluate the proposed chemo/photothermal therapy in vitro over melanoma cell cultures.

Injectable Thermosensitive Chitosan-Collagen Hydrogel as A Delivery System for Marine Polysaccharide Fucoidan

Fucoidans, sulfated polysaccharides from brown algae, possess multiple bioactivities in regard to osteogenesis, angiogenesis, and inflammation, all representing key molecular processes for successful bone regeneration. To utilize fucoidans in regenerative medicine, a delivery system is needed which temporarily immobilizes the polysaccharide at the injured site. Hydrogels have become increasingly interesting biomaterials for the support of bone regeneration. Their structural resemblance with the extracellular matrix, their flexible shape, and capacity to deliver bioactive compounds or stem cells into the affected tissue make them promising materials for the support of healing processes. Especially injectable hydrogels stand out due to their minimal invasive application. In the current study, we developed an injectable thermosensitive hydrogel for the delivery of fucoidan based on chitosan, collagen, and β-glycerophosphate (β-GP). Physicochemical parameters such as gelation time, gelation temperature, swelling capacity, pH, and internal microstructure were studied. Further, human bone-derived mesenchymal stem cells (MSC) and human outgrowth endothelial cells (OEC) were cultured on top (2D) or inside the hydrogels (3D) to assess the biocompatibility. We found that the sol-gel transition occurred after approximately 1 min at 37 °C. Fucoidan integration into the hydrogel had no or only a minor impact on the mentioned physicochemical parameters compared to hydrogels which did not contain fucoidan. Release assays showed that 60% and 80% of the fucoidan was released from the hydrogel after two and six days, respectively. The hydrogel was biocompatible with MSC and OEC with a limitation for OEC encapsulation. This study demonstrates the potential of thermosensitive chitosan-collagen hydrogels as a delivery system for fucoidan and MSC for the use in regenerative medicine.

Does the Freeze-Thaw Technique Affect the Properties of the Alginate/Chitosan Glutamate Gels with Posaconazole as a Model Antifungal Drug?

Hydrogels are semi-solid systems with high flexibility, which, due to holding large amounts of water, are similar to natural tissues and are very useful in the field of biomedical applications. Despite the wide range of polymers available to form hydrogels, novel techniques utilized to obtain hydrogels with adequate properties are still being developed. The aim of this study was to evaluate the impact of the freeze–thaw technique on the properties of cryogels based on sodium alginate and chitosan glutamate with posaconazole as a model antifungal substance. The effect of the freezing and thawing process on the physicochemical, rheological, textural and bioadhesive properties of prepared cryogels was examined. Additionally, the antifungal activity against Candida albicans, Candida parapsilosis and Candida krusei of designed formulations was examined. It was shown that the freeze–thaw technique significantly improved viscosity, bioadhesiveness, textural properties and prolonged the in vitro posaconazole release. Moreover, alginate/chitosan glutamate cryogels exhibited higher values of inhibition zone in C. parapsilosis culture than traditional hydrogel formulations.

Influence of Technological Factors on the Quality of Chitosan Microcapsules with Boswellia serata L. Essential Oil

Essential oils contain many volatile compounds that are not stable and lose their pharmacological effect when exposed to the environment. The aim of this study is to protect Boswellia serrata L. essential oil from environmental factors by encapsulation and determine the influence of chitosan concentration and types (2%, 4%; medium and high molecular weights), essential oil concentration, different emulsifiers (Tween and Span), and technological factors (stirring time, launch height, drip rate) on the physical parameters, morphology, texture, and other parameters of the generated gels, emulsions, and microcapsules. For the first time, Boswellia serrata L. essential oil microcapsules with chitosan were prepared by coacervation. Hardness, consistency, stickiness, viscosity, and pH of chitosan gels were tested. Freshly obtained microcapsules were examined for moisture, hardness, resistance to compression, size, and morphology. Results show that different molecular weights and concentrations of chitosan affected gel hardness, consistency, stickiness, viscosity, mobility, and adhesion. An increase in chitosan concentration from 2% to 4% significantly changed the appearance of the microcapsules. It was found that spherical microcapsules were formed when using MMW and HMW 80/1000 chitosan. Chitosan molecular weight, concentration, essential oil concentration, and stirring time all had an impact on the hardness of the microcapsules and their resistance to compression.

Azelaic acid loaded chitosan and HPMC based hydrogels for treatment of acne: formulation, characterization, in vitro-ex vivo evaluation

In this study, hydrogels containing azelaic acid were developed using chitosan or HPMC (1-7%) for local treatment of acne vulgaris. Physicochemical properties such as viscosity, pH and mechanical properties were evaluated. In vitro release and ex vivo permeability studies were performed using Franz diffusion cell system. The pH of the hydrogels were highly compatible with the skin pH and varied between 4.38-5.84. The cumulative release percentages of the hydrogels at the end of 6 hours were 65-78%, whereas the marketed product yielded 50% drug release. According to the ex vivo permeability results, azelaic acid accumulated in the skin were found to be 9.38 ± 0.65% (marketed cream), 19.53 ± 1.06% (K3), 10.96 ± 1.91% (H6). The antiacne studies with Cutibacterium acnes revealed that K3 (29.45 ± 0.95) and H6 (32.35 ± 0.15) had higher inhibition zones compared to the marketed cream (24.50 ± 0.90). Additionally, the gels were found to be highly stable as a result of the stability studies for 6 months. Among the hydrogels that were prepared based on experimental findings, K3 (3% Chitosan) and H6 (6% HPMC) represented elevated in vitro release profile, higher permeability and increased antiacne activity. The findings of this research suggest that the developed hydrogels might be an alternative to the marketed product.

Textural and sensory characterization of carbomeric gels with panthenol

Introduction. The aim of this study was to evaluate the influence of the carbomer concentration (used as the gelling agent, in the range 0.5 - 2.0%) on textural and sensory characteristics of gels with 3% panthenol using sensory analysis as subjective and texture analysis as an objective assessment method. An active substance in the gels was panthenol, which also acted as a neutralizing agent of the carbomer. Participants and methods. Twenty female panelists, aged between 20 and 36, participated in the sensory study and had to fulfill a questionnaire regarding product attributes before, during and after application on the skin. Texture analysis was performed on CT3 Texture Analyzer, after each week for a month, and the following parameters were calculated: hardness cycle 1, hardness cycle 2, cohesiveness, adhesiveness, resilience and springiness. Results. The results showed that gels were stable over time and the structure of the gels was preserved regardless of compression. An increase in hardness and resilience was followed by an increase in the concentration of carbomer, while adhesiveness, cohesiveness and springiness did not differ much among different gels. The same trend was noticed when gels were compared during time. Sensory analysis confirmed findings of texture analysis and showed that with the increment of carbomer concentration, stickiness and density also enhanced, while absorption rate and spreadability decreased. Gel with 1% carbomer was chosen by the majority of panelists as favorite and as a gel they would regularly use. Conclusion. The methods of textural and sensory analysis represent valuable approaches in drug/cosmetic product design because they offer insight in the compliance of patients/consumers.

Preparation and Characterization of an Injectable and Photo-Responsive Chitosan Methacrylate/Graphene Oxide Hydrogel: Potential Applications in Bone Tissue Adhesion and Repair

As life expectancy continues to increase, the inevitable weakening and rupture of bone tissue have grown as concerns in the medical community, thus leading to the need for adhesive materials suitable for bone repair applications. However, current commercially available adhesives face certain drawbacks that prevent proper tissue repair, such as low biocompatibility, poor adhesion to wet surfaces, and the need for high polymerization temperatures. This work aims to develop an injectable and photo-responsive chitosan methacrylate/graphene oxide (ChiMA/GO) adhesive nanocomposite hydrogel of high biocompatibility that is easy to apply by simple extrusion and that offers the possibility for in situ polymer and physiological temperatures. The nanocomposite was thoroughly characterized spectroscopically, microscopically, rheologically, thermally, and through mechanical, textural, and biological assays to fully evaluate its correct synthesis and functionalization and its performance under physiological conditions that mimic those observed in vivo. In addition, a finite element analysis (FEA) simulation was used to evaluate its performance in femur fractures. Results suggest the material’s potential as a bioadhesive, as it can polymerize at room temperature, shows superior stability in physiological media, and is capable of withstanding loads from body weight and movement. Moreover, the material showed remarkable biocompatibility as evidenced by low hemolytic and intermediate platelet aggregation tendencies, and high cytocompatibility when in contact with osteoblasts. The comprehensive studies presented here strongly suggest that the developed hydrogels are promising alternatives to conventional bone adhesives that might be further tested in vivo in the near future.

Marine Health-Promoting Compounds: Recent Trends for Their Characterization and Human Applications

Seaweeds represent a rich source of biologically active compounds with several applications, especially in the food, cosmetics, and medical fields. The beneficial effects of marine compounds on health have been increasingly explored, making them an excellent choice for the design of functional foods. When studying marine compounds, several aspects must be considered: extraction, identification and quantification methods, purification steps, and processes to increase their stability. Advanced green techniques have been used to extract these valuable compounds, and chromatographic methods have been developed to identify and quantify them. However, apart from the beneficial effects of seaweeds for human health, these natural sources of bioactive compounds can also accumulate undesirable toxic elements with potential health risks. Applying purification techniques of extracts from seaweeds may mitigate the amount of excessive toxic components, ensuring healthy and safer products for commercialization. Furthermore, limitations such as stability and bioavailability problems, chemical degradation reactions during storage, and sensitivity to oxidation and photo-oxidation, need to be overcome using, for example, nanoencapsulation techniques. Here we summarize recent advances in all steps of marine products identification and purification and highlight selected human applications, including food and feed applications, cosmetic, human health, and fertilizers, among others.

Chitosan-based multifunctional flexible hemostatic bio-hydrogel

Realizing the potential application of chitosan as an effective biomedical hemostatic agent has become an emerging research hotspot. However, fabricating a flexible chitosan-based hemostatic bio-hydrogel with self-adhesion feature in humid conditions and rapid hemostasis capability remains a challenge. Herein, we reported the development of chitosan-based hydrogels (DCS-PEGSH gels) with typical multilevel pore structures, which were cross-linked by 3-(3,4-dihydroxyphenyl) propionic acid-modified chitosan (DCS) and sebacic acid-terminated polyethylene glycol modified by p-hydroxybenzaldehyde (PEGSH). By precisely regulating the proportion of PEGSH, the fabricated bio-hydrogels displayed favorable cytocompatibility, suitable stretchability (∼780%), and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (∼68.5 kPa) of the assembled bio-hydrogel ensured its firm adherence on pigskin and on bleeding wound in both static and dynamic humid environments without shedding, thus providing a long service life. The fabricated hydrogels exhibited shorter blood clotting time (50 s) and lower blood clotting index (BCI, 41) than the commercial chitosan sponge (288 s, BCI 65). Notably, the amount of blood loss from the liver in mice was reduced by almost 90% as compared to that for the control group. This study paves a solid way for developing a chitosan-based hydrogel with self-adhesive, self-healing, stretchability, biocompatibility, and antibacterial and antioxidant properties through molecular design and structural regulation, which will enable the biomedical application of chitosan in emergency hemostasis, particularly in joints and extremities. STATEMENT OF SIGNIFICANCE: The design and preparation of multifunctional integrated green adhesive bio-hydrogels while avoiding the use of organic solvents and toxic chemical reagents has been an emerging challenge. Herein, a flexible chitosan-based hemostatic bio-hydrogel that integrates multifunctional properties was successfully synthesized. The bio-hydrogel displayed suitable stretchability (780%) and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (68.5 kPa) ensured firm adherence of the assembled hydrogel on pigskin and on the bleeding wound site in both static and dynamic humid environments without shedding, thus providing a long service life. In addition, the designed hydrogel showed good compatibility and antibacterial performance. The dynamic Schiff base endowed the bio-hydrogel with excellent self-healing performance without any external stimuli.

Bioactive Carbohydrate Polymers-Between Myth and Reality

Polysaccharides are complex macromolecules long regarded as energetic storage resources or as components of plant and fungal cell walls. They have also been described as plant mucilages or microbial exopolysaccharides. The development of glycosciences has led to a partial and difficult deciphering of their other biological functions in living organisms. The objectives of glycobiochemistry and glycobiology are currently to correlate some structural features of polysaccharides with some biological responses in the producing organisms or in another one. In this context, the literature focusing on bioactive polysaccharides has increased exponentially during the last two decades, being sometimes very optimistic for some new applications of bioactive polysaccharides, notably in the medical field. Therefore, this review aims to examine bioactive polysaccharide, taking a critical look of the different biological activities reported by authors and the reality of the market. It focuses also on the chemical, biochemical, enzymatic, and physical modifications of these biopolymers to optimize their potential as bioactive agents.

Preparation and characterization of antibacterial bacterial cellulose/chitosan hydrogels impregnated with silver sulfadiazine

Hydrogels with pH sensitivity and stable mechanical and antibacterial properties have many desirable qualities and broad applications. A hydrogel based on bacterial cellulose and chitosan, impregnated with silver sulfadiazine (<1% w/w), was prepared using glutaraldehyde as the crosslinking agent. The presence of SSd was confirmed by Fourier transform infrared spectroscopy. Micropore size, swelling ratio, pH- sensitivity, and gram positive and negative antibacterial properties were studied by disk diffusion and colony forming unit. X-ray diffraction confirmed the presence of amorphous and crystalline regions in the hydrogel matrix following addition of SSd. The elemental composition, morphology, and mechanical properties of the hydrogels were characterized. Incorporation of SSd into bacterial cellulose-chitosan hydrogels significantly improved their mechanical and antibacterial properties. The antibacterial activity against E. coli and S. aureus was evaluated and SSd-BC/Ch hydrogels are more toxic to S. aureus than to E. coli. We use FESEM to observe bacterial morphology before and after exposure to SSd-BC/Ch hydrogels. The BacLight LIVE/DEAD membrane permeability kit is used to evaluate the membrane permeability of bacteria. These antibacterial hydrogels have many promising applications in food packaging, tissue engineering, drug delivery, clinical, biotechnological, and biomedical fields.

The Impact of Gelatin on the Pharmaceutical Characteristics of Fucoidan Microspheres with Posaconazole

Fungal infections and invasive mycoses, despite the continuous medicine progress, are an important globally therapeutic problem. Multicompartment dosage formulations (e.g., microparticles) ensure a short drug diffusion way and high surface area of drug release, which as a consequence can provide improvement of therapeutic efficiency compared to the traditional drug dosage forms. As fucoidan is promising component with wide biological activity per se, the aim of this study was to prepare fucospheres (fucoidan microparticles) and fucoidan/gelatin microparticles with posaconazole using the one-step spray-drying technique. Pharmaceutical properties of designed fucospheres and the impact of the gelatin addition on their characteristics were evaluated. An important stage of this research was in vitro evaluation of antifungal activity of developed microparticles using different Candida species. It was observed that gelatin presence in microparticles significantly improved swelling capacity and mucoadhesiveness, and provided a sustained POS release. Furthermore, it was shown that gelatin addition enhanced antifungal activity of microparticles against tested Candida spp. strains. Microparticles formulation GF6, prepared by the spray drying of 20% fucoidan, 5% gelatin and 10% Posaconazole, were characterized by optimal mucoadhesive properties, high drug loading and the most sustained drug release (after 8 h 65.34 ± 4.10% and 33.81 ± 5.58% of posaconazole was dissolved in simulated vaginal fluid pH 4.2 or 0.1 M HCl pH 1.2, respectively).

Oil-in-water Pickering emulsion stabilization with oppositely charged polysaccharide particles: chitin nanocrystals/fucoidan complexes

BACKGROUND

Chitin nanocrystals (ChN) are insoluble particles that can be used as stabilizers for Pickering emulsions. Their unique cationic properties and antibacterial activity have generated considerable interest among researchers. However, ChN have remained largely underexplored. Furthermore, the droplets of the emulsions stabilized by ChN are as large as 10-100 μm, and their physical stability requires further improvement. Some studies have shown that the spontaneous reaction of oppositely charged particles can effectively stabilize the emulsions. Positively charged ChN and negatively charged fucoidan (F) were therefore compounded to stabilize Pickering emulsions, and the stability of these emulsions was analyzed qualitatively.

RESULTS

The results showed that the composite particles comprising two polysaccharides in a mass ratio of 1:1 and at a pH of 2 (ChN₁ -F₁ -pH 2) possessed the lowest sulfate content (20.1%) and almost zero potential (-3 mV), indicating a high degree of neutralization of the positively charged amino group in ChN and the negatively charged sulfate group in F. Meanwhile, ChN₁ -F₁ -pH 2 displayed a dense network structure that improved the dispersibility and wettability (contact angle = 9.3°). Fourier transform infrared spectroscopy results confirmed that ChN and F were effectively combined through electrostatic interaction or neutralization to produce a polyelectrolyte complex. Furthermore, the particle size of the Pickering emulsion stabilized by ChN-F was significantly reduced, and the maximum size did not exceed 10 μm; the physical and storage stability also improved. The ChN₁ -F₁ -pH 2 emulsion presented excellent storage stability; in particular, the emulsions stabilized by ChN₁ -F₁ -pH 5 and ChN₁ -F₁ -pH 6 exhibited excellent flocculation stabilities.

CONCLUSION

The size of the emulsion droplets stabilized by the oppositely charged polysaccharide particles (ChN-F complexes) reduced significantly. Furthermore, by changing the mass ratio and pH, the microstructure and binding degree of the complexes can be adjusted, thereby promoting their adsorption on the oil-water interface and improving the stability of the Pickering emulsion. © 2020 Society of Chemical Industry.

Hydrogel-Forming Algae Polysaccharides: From Seaweed to Biomedical Applications

With the increasing growth of the algae industry and the development of algae biorefinery, there is a growing need for high-value applications of algae-extracted biopolymers. The utilization of such biopolymers in the biomedical field can be considered as one of the most attractive applications but is challenging to implement. Historically, polysaccharides extracted from seaweed have been used for a long time in biomedical research, for example, agarose gels for electrophoresis and bacterial culture. To overcome the current challenges in polysaccharides and help further the development of high-added-value applications, an overview of the entire polysaccharide journey from seaweed to biomedical applications is needed. This encompasses algae culture, extraction, chemistry, characterization, processing, and an understanding of the interactions of soft matter with living organisms. In this review, we present algae polysaccharides that intrinsically form hydrogels: alginate, carrageenan, ulvan, starch, agarose, porphyran, and (nano)cellulose and classify these by their gelation mechanisms. The focus of this review further lays on the culture and extraction strategies to obtain pure polysaccharides, their structure-properties relationships, the current advances in chemical backbone modifications, and how these modifications can be used to tune the polysaccharide properties. The available techniques to characterize each organization scale of a polysaccharide hydrogel are presented, and the impact on their interactions with biological systems is discussed. Finally, a perspective of the anticipated development of the whole field and how the further utilization of hydrogel-forming polysaccharides extracted from algae can revolutionize the current algae industry are suggested.

Alginate and its application to tissue engineering

Alginate is a polysaccharide of natural origin, which shows outstanding properties of biocompatibility, gel forming ability, non-toxicity, biodegradability and easy to process. Due to these excellent properties of alginate, sodium alginate, a hydrogel form of alginate, oxidized alginate and other alginate based materials are used in various biomedical fields, especially in drug delivery, wound healing and tissue engineering. Alginate can be easily processed as the 3D scaffolding materials which includes hydrogels, microcapsules, microspheres, foams, sponges, and fibers and these alginate based bio-polymeric materials have particularly used in tissue healing, healing of bone injuries, scars, wound, cartilage repair and treatment, new bone regeneration, scaffolds for the cell growth. Alginate can be easily modified and blended by adopting some physical and chemical processes and the new alginate derivative materials obtained have new different structures, functions, and properties having improved mechanical strength, cell affinity and property of gelation. This can be attained due to combination with other different biomaterials, chemical and physical crosslinking, and immobilization of definite ligands (sugar and peptide molecules). Hence alginate, its modified forms, derivative and composite materials are found to be more attractive towards tissue engineering. This article provides a comprehensive outline of properties, structural aspects, and application in tissue engineering.

Attachable Hydrogel Containing Indocyanine Green for Selective Photothermal Therapy against Melanoma

Melanoma is the most lethal form of skin cancer because it spreads easily to other tissues, thereby decreasing the efficiency of its treatment via chemo-, radio-, and surgical therapies. We suggest the application of an attachable hydrogel for the treatment of melanoma whereby the size and amount of incorporated indocyanine green (ICG) for photothermal therapy (PTT) can be controlled. An attachable hydrogel (poly(acrylamide-co-diallyldimethylammonium chloride); PAD) that incorporates ICG as a near-infrared (NIR) absorber was fabricated using a biocompatible polymer. The temperature of PAD-ICG increases under 808 nm laser irradiation. The hydrogel protects the ICG against decomposition; consequently, PAD-ICG can be reused for PTT. The attachment of PAD-ICG to an area with melanoma in mice, with irradiation using a NIR laser, successfully eliminated melanoma. Thus, the data suggest that PAD-ICG is a smart material that could be used for selective target therapy against melanoma in humans.

Marine Algae Polysaccharides as Basis for Wound Dressings, Drug Delivery, and Tissue Engineering: A Review

The present review considers the physicochemical and biological properties of polysaccharides (PS) from brown, red, and green algae (alginates, fucoidans, carrageenans, and ulvans) used in the latest technologies of regenerative medicine (tissue engineering, modulation of the drug delivery system, and the design of wound dressing materials). Information on various types of modern biodegradable and biocompatible PS-based wound dressings (membranes, foams, hydrogels, nanofibers, and sponges) is provided; the results of experimental and clinical trials of some dressing materials in the treatment of wounds of various origins are analyzed. Special attention is paid to the ability of PS to form hydrogels, as hydrogel dressings meet the basic requirements set out for a perfect wound dressing. The current trends in the development of new-generation PS-based materials for designing drug delivery systems and various tissue-engineering scaffolds, which makes it possible to create human-specific tissues and develop target-oriented and personalized regenerative medicine products, are also discussed.

Copper Metal Organic Polyhedron (Cu-MOP) Hydrogel as Responsive Cytoprotective Shell for Living Cell Encapsulation

Single-cells coated with functional shells to protect them from external harsh condition have great potential applications in many fields such as tissue engineering, cell-based devices, cell biology, and so on. Herein, copper metal organic polyhedron (Cu-MOP) hydrogel has been applied as a soft shell for cell protection under both physical and chemical stimulations. Compared with a previous strategy, this MOP-Gel shell not only possesses more satisfied protection effect but also could be prepared and removed facilely without any damage to the encapsulated cells.

Doxycycline and Monocaprin In Situ Hydrogel: Effect on Stability, Mucoadhesion and Texture Analysis and In Vitro Release

The aim of this study was to develop a stable aqueous formulation containing a combination of doxycycline and monocaprin in clinically relevant concentrations. Increase in expression of Matrix metalloproteinases (MMPs) and microbial role in oral diseases is well established and the combination of above active ingredients could be potentially beneficial in treatment of oral mucosal conditions. The hydrogels containing different concentrations of doxycycline and monocaprin in the presence and absence of stabilizing excipients were developed and their stabilities were studied at 4 °C for up to 1 year. The drug-drug interaction was evaluated using Fourier-transform infrared spectroscopy (FTIR). The addition of monocaprin on doxycycline in situ hydrogel's mucoadhesiveness, texture properties and drug release mechanism was studied. The addition of monocaprin negatively affected the doxycycline stability and was concentration dependent, whereas monocaprin was stable up to 1 year. Doxycycline did not interfere with the anti-Candidal activity of monocaprin. Furthermore, the presence of monocaprin significantly affected the formulation hardness, compressibility and adhesiveness. Monocaprin and doxycycline release followed zero order kinetics and the release mechanism was, by anomalous (non-Fickian) diffusion. The addition of monocaprin increased the drug release time and altered the release mechanism. It is possible to stabilize doxycycline in the presence of monocaprin up to 1 year at 4 °C.

Marine Polysaccharides in Pharmaceutical Applications: Fucoidan and Chitosan as Key Players in the Drug Delivery Match Field

The use of marine-origin polysaccharides has increased in recent research because they are abundant, cheap, biocompatible, and biodegradable. These features motivate their application in nanotechnology as drug delivery systems; in tissue engineering, cancer therapy, or wound dressing; in biosensors; and even water treatment. Given the physicochemical and bioactive properties of fucoidan and chitosan, a wide range of nanostructures has been developed with these polysaccharides per se and in combination. This review provides an outline of these marine polysaccharides, including their sources, chemical structure, biological properties, and nanomedicine applications; their combination as nanoparticles with descriptions of the most commonly used production methods; and their physicochemical and biological properties applied to the design of nanoparticles to deliver several classes of compounds. A final section gives a brief overview of some biomedical applications of fucoidan and chitosan for tissue engineering and wound healing.

Possibilities of Fucoidan Utilization in the Development of Pharmaceutical Dosage Forms

Fucoidan is a polysaccharide built from L-fucose molecules. The main source of this polysaccharide is the extracellular matrix of brown seaweed (Phaeophyta), but it can be also isolated from invertebrates such as sea urchins (Echinoidea) and sea cucumbers (Holothuroidea). Interest in fucoidan is related to its broad biological activity, including possible antioxidant, anti-inflammatory, antifungal, antiviral or antithrombotic effects. The potential application of fucoidan in the pharmaceutical technology is also due to its ionic nature. The negative charge of the molecule results from the presence of sulfate residues in the C-2 and C-4 positions, occasionally in C-3, allowing the formation of complexes with other oppositely charged molecules. Fucoidan is non-toxic, biodegradable and biocompatible compound approved by Food and Drug Administration (FDA) as Generally Recognized As Safe (GRAS) category as food ingredient. Fucoidan plays an important role in the pharmaceutical technology, so in this work aspects concerning its pharmaceutical characteristics and designing of various dosage forms (nanoparticles, liposomes, microparticles, and semisolid formulations) with fucoidan itself and with its combinations with other polymers or components that give a positive charge were reviewed. Advantages and limitations of fucoidan utilization in the pharmaceutical technology were also discussed.

Icariin-Loaded Polyvinyl Alcohol/Agar Hydrogel: Development, Characterization, and In Vivo Evaluation in a Full-Thickness Burn Model

Tissue regeneration has become a promising strategy for repairing damaged skin tissues. Among the hydrogels for tissue regeneration applications, topical hydrogels have demonstrated great potential for use as 3D-scaffolds in the burn wound healing process. Currently, no report has been published specifically on icariin-loaded polyvinyl alcohol (PVA)/agar hydrogel on full-thickness burn wounds. In the present study, burn tissue regeneration based on biomimetic hydrogel scaffolds was used for repairing damaged extracellular matrix. Furthermore, a skin burn model was developed in rats, and the icariin-loaded PVA/agar hydrogels were implanted into the damaged portions. The regeneration of the damaged tissues with the help of the icariin-loaded hydrogel group exhibited new translucent skin tissues and repaired extracellular matrix, indicating that the hydrogel can enhance the wound healing process. Moreover, characterization studies such as X-ray diffraction, Fourier-transformed infrared spectroscopy, and differential scanning calorimetry reported the extent of compatibility between icariin and its polymers. Results of the field emission scanning electron microscopy images revealed the extent of the spread of icariin within the polymer-based hydrogel. Furthermore, the wound healing potential, confirmed by histopathological and histochemical findings at the end of 21 days, revealed the visual evidence for the biomimetic property of icariin-loaded PVA/agar hydrogel scaffolds with the extracellular matrix for tissue regeneration.

Using Bioactive Glasses in the Management of Burns

The management of burn injuries is considered an unmet clinical need and, to date, no fully satisfactory solution exists to this problem. This mini-review aims to explore the potential of bioactive glasses (BGs) for burn care due to the therapeutic effects of their ionic dissolution products. BGs have been studied for more than 40 years and boast a long successful history in the substitution of damaged tissues, especially bone. Considering their exceptional versatility and attractive characteristics, these synthetic materials have also recently been proposed in the treatment of soft tissue-related disorders such as skin wounds. Specifically, improving fibroblast proliferation, inducing angiogenesis, and eliciting antibacterial activity (with the additional advantage of avoiding administration of antibiotics) are all considered as key added values carried by BGs in the treatment of burn injuries. However, some issues deserve careful consideration while proceeding with the research, including the selection of suitable BG compositions, appropriate forms of application (e.g., BG fibers, ointments or composite patches), as well as the procedures for reliable in vivo testing.

Recent Advances in the Use of Algal Polysaccharides for Skin Wound Healing

BACKGROUND

Chronic skin wounds and pressure ulcers represent major health care problems in diabetic individuals, as well as patients who suffered a spinal cord injury. Current treatment methods are only partially effective and such wounds exhibit a high recurrence rate. Open wounds are at high risk of invasive wound infections, which can lead to amputation and further disability. An interdisciplinary approach is needed to develop new and more effective therapies.

METHODS

The purpose of this work is to review recent studies focusing on the use of algal polysaccharides in commercially available as well as experimental wound dressings. Studies that discuss wound dressings based on algal polysaccharides, some of which also contain growth factors and even living cells, were identified and included in this review.

RESULTS AND CONCLUSION

Algal polysaccharides possess mechanical and physical properties, along with excellent biocompatibility and biodegradability that make them suitable for a variety of applications as wound dressings. Furthermore, algal polysaccharides have been used for a dual purpose, namely as wound covering, but also as a vehicle for drug delivery to the wound site.

Seaweeds as Source of Bioactive Substances and Skin Care Therapy—Cosmeceuticals, Algotheraphy, and Thalassotherapy

Riverine, estuarine, and coastal populations have always used algae in the development of home remedies that were then used to treat diverse health problems. The empirical knowledge of various generations originated these applications, and their mechanism of action is, in most cases, unknown, that is, few more scientific studies would have been described beyond simple collection and ethnographic recording. Nevertheless, recent investigations, carried out with the purpose of analyzing the components and causes that alter the functioning and the balance of our organism, are already giving their first results. Water, and especially sea water is considered as essential to life on our planet. It sings all the substances necessary and conducive to the development of the living being (minerals, catalysts, vitamins, amino acids, etc.). Oceans cover over 70% of Earth, being home to up to 90% of the organisms in the planet. Many rich resources and unique environments are provided by the ocean. Additionally, bioactive compounds that multiple marine organisms have a great potential to produce can be used as nutraceuticals, pharmaceuticals, and cosmeceuticals. Both primary and secondary metabolites are produced by algae. The first ones are directly implicated in development, normal growth, or reproduction conditions to perform physiological functions. Stress conditions, like temperature changes, salinity, environmental pollutants, or UV radiation exposure cause the performance of secondary metabolites. In algae, proteins, polysaccharides, fatty acids, and amino acids are primary metabolites and phenolic compounds, pigments, vitamins, sterols, and other bioactive agents, all produced in algae tissues, are secondary metabolites. These algal active constituents have direct relevance in cosmetics.

Selective removal of carious lesion with Er:YAG laser followed by dentin biomodification with chitosan

The aim of this study was to evaluate the effect of Er:YAG laser for selective removal of carious lesion, followed by biomodification with chitosan gel where the subsurface microhardness, chemical composition, and morphological changes of the residual caries-affected dentin were examined. Artificial dentinal lesions were created by pH-cycling method (14 days) in 104 bovine specimens (5 × 5 mm). Specimens were randomly divided according to the carious removal method: bur (low-speed handpiece) or Er:YAG laser (250 mJ/4 Hz). Specimens were treated with 35% phosphoric acid and were subdivided into two groups according to dentin biomodification: without chitosan (control) and 2.5% chitosan. Forty specimens were restored with an adhesive system and composite resin. Subsurface microhardness tests were performed in sound dentin, caries-affected dentin, residual caries-affected dentin, and after the restoration. The other 64 specimens were subjected to SEM-EDS atomic analysis. Data were statistically analyzed (p < 0.05). After the Er:YAG laser excavation, the microhardness value of residual caries-affected dentin was higher (p < 0.05) than bur-treated dentin. A significant decrease in the amount of Ca, P, and Ca/P ratio was found after the removal of carious lesions with Er:YAG laser (p < 0.05). The biomodification with chitosan did not influence the microhardness and atomic percentage of Ca, P, and Ca/P ratio of residual caries-affected dentin (p > 0.05). SEM analysis showed morphological changes on residual caries-affected dentin (p > 0.05). The selective removal of carious dentin with Er:YAG laser increased microhardness of residual caries-affected dentin, changing its surface morphology and chemical composition. The biomodification with chitosan did not influence the structural and chemical composition of residual caries-affected dentin.