Structural studies of the interactions of normal and abnormal human plasmins with bovine basic pancreatic trypsin inhibitor

Miniature bovine pancreatic trypsin inhibitors (m-BPTIs) of the West Nile virus NS2B-NS3 protease

The mosquito-borne West Nile virus (WNV) causes a wide range of symptoms ranging from fever to the often fatal viral encephalitis. To date, no vaccine or drug therapy is available. The trypsin-like WNV NS2B-NS3 protease is deemed a plausible drug target and was shown to be inhibited by bovine pancreatic trypsin inhibitor (BPTI), a 58-residue protein isolated from bovine lung. Herein, we report a protein truncation study that resulted in a novel 14-residue cyclic peptide with equipotent inhibitory activity to native BPTI. We believe our truncation strategy can be further applied in the development of peptide-based inhibitors targeting trypsin-like proteases.

Evaluation of homology modeling of the severe acute respiratory syndrome (SARS) coronavirus main protease for structure based drug design

To accelerate the development of drugs against severe acute respiratory syndrome (SARS), we constructed a homology model of the SARS coronavirus main protease using our modeling software, FAMS Ligand&Complex, and released it before the X-ray structure was solved. The X-ray structure showed our model as accurately predicted and useful for structure based drug design.

Interaction between the antigen and antibody is controlled by the constant domains: normal mode dynamics of the HEL-HyHEL-10 complex

The antigen binding fragment (Fab) of a monoclonal antibody (HyHEL-10) consists of variable domains (Fv) and constant domains (CL-CH1). Normal modes have been calculated from the three-dimensional structures of hen egg lysozyme (HEL) with Fab, those of HEL with Fv, and so on. Only a small structural change was found between HEL-Fab and HEL-Fv complexes. However, HEL-Fv had a one order of magnitude lower dissociation constant than HEL-Fab. The Calpha fluctuations of HEL-Fab differed from those of HEL-Fv with normal mode calculation, and the dynamics can be thought to be related to the protein-protein interactions. CL-CH1 may have influence not only around local interfaces between CL-CH1 and Fv, but also around the interacting regions between HEL and Fv, which are longitudinally distant. Eighteen water molecules were found in HEL-Fv around the interface between HEL and Fv compared with one water molecule in HEL-Fab. These solvent molecules may occupy the holes and channels, which may occur due to imperfect complementarity of the complex. Therefore, the suppression of atomic vibration around the interface between Fv and HEL can be thought to be related to favorable and compact interface formation by complete desolvation. It is suggested that the ability to control the antigen-antibody affinity is obtained from modifying the CL-CH1. The second upper loop in the constant domain of the light chain (UL2-CL), which is a conserved gene in several light chains, showed the most remarkable fluctuation changes. UL2-CL could play an important role and could be attractive for modification in protein engineering.

Dynamic flexibility of a peptide-binding groove of human HLA-DR1 class II MHC molecules: normal mode analysis of the antigen peptide-class II MHC complex

Class II major histocompatibility complex (MHC) has tolerance for binding longer antigen peptides than those bound by class I MHC. In this paper, a normal mode analysis on HLA-DR1 class II MHC involving an antigen peptide indicated that the peptide-binding groove had some different dynamic characteristics from that of HLA-A2 class I MHC. The dynamic changes in the class I groove with removal of the bound peptide were limited primarily to the central region and the C-terminal side (corresponding to the C-terminal side of the bound peptide) of the groove, while the dynamic changes in the class II groove with removal of the bound peptide extended to the whole of the groove, and were especially remarkable around a strand located in the N-terminal side (corresponding to the N-terminal side of the bound peptide) of the groove. These results suggest that the N-terminal side of the class II groove is more flexible than the same side of the class I groove, and this flexibility may allow some N-terminal residues of the bound peptide to extend outside the class II groove. Definite anti-correlative motions with removal of the bound peptide appeared between two alpha-helical regions of class II MHC as in the case of class I MHC. These motions of the class II groove may play an important role in obtaining "a flexible dynamic fit" against diverse longer peptides both of whose terminals extend outside the groove.

Dynamic character of human growth hormone and its receptor: normal mode analysis

Human growth hormone (hGH) induces dimerization of its binding protein (hGHbp). hGH binds to the first hGHbp (bp1) on site 1, and then the hGH-bp1 heterodimer complex binds to the second hGHbp (bp2) on site 2. Although the interactions of hGH and hGHbps have been studied from different viewpoints, few studies from a dynamic viewpoint have been reported. Especially, since in the SCOP domain database hGHbp is classified as two clear immunoglobulin-like domains, it is of interest to understand how hGH interacts with the hGHbp domains. Therefore, we carried out normal mode analysis (NMA) of free hGH, free bp1, free bp2, and the hGH-bp1 heterodimer complex, as well as the hGH-bp1-bp2 ternary complex to investigate how the dynamics of the proteins change before and after forming the complexes. NMA showed that the domain motion between the N-terminal and the C-terminal domains of free bp1 markedly decreased after binding to hGH, and that the domain motion of bp2 decreased similarly after binding to the hGH-bp1 heterodimer complex. The present study demonstrates that hGH regulates the inter-domain motions of both hGHbps.

Dynamic characteristics of a peptide-binding groove of human HLA-A2 class I MHC molecules: normal mode analysis of the antigen peptide-class I MHC complex

Class I major histocompatibility complex (MHC) binds antigen peptides with various sequences. We performed a normal mode analysis of HLA-A2 MHC that binds three peptides with different affinity. HLA-A2 MHC has a peptide-binding groove composed of two alpha-helices (residue 49-84, residue 140-179). Some residues in the center of the groove showed an increase in fluctuations and some residue pairs between two helix groups showed a negative change in correlations by removing the antigen peptide. The extent of the fluctuation and correlation changes correlated well with the experimental ranking of the three peptides in binding affinity. Some definite anti-correlative motions were found between two helix groups in low frequency modes (<50 cm(-1)) by removing the antigen peptide. We propose that the above anti-correlative motions play an important role to bind the antigen peptide, especially in obtaining a "dynamic fit."

Analysis of the interaction between the aspartic peptidase inhibitor SQAPI and aspartic peptidases using surface plasmon resonance

Aspartic peptidase inhibitors, which are themselves proteins, are strong inhibitors (small inhibition constants) of some aspartic peptidases but not others. However, there have been no studies of the kinetics of the interaction between a proteinaceous aspartic peptidase inhibitor and aspartic peptidases. This paper describes an analysis of rate constants for the interaction between recombinant squash aspartic peptidase inhibitor (rSQAPI) and a panel of aspartic peptidases that have a range of inhibition constants for SQAPI. Purified rSQAPI completely inhibits pepsin at a 1:1 molar ratio of pepsin to rSQAPI monomer (inhibition constant 1 nM). The interaction of pepsin with immobilized rSQAPI, at pH values between 3.0 and 6.0, was monitored using surface plasmon resonance. Binding of pepsin to rSQAPI was slow (association rate constants ca 10(4)M (-1)s(-1)), but rSQAPI was an effective pepsin inhibitor because dissociation of the rSQAPI-pepsin complex was much slower (dissociation rate constants ca 10(-4)s(-1)), especially at low pH values. Similar results were obtained with a His-tagged rSQAPI. Strong inhibition (inhibition constant 3 nM) of one isoform (rSap4) of the family of Candida albicans-secreted aspartic peptidases was, as with pepsin, characterized by slow binding of rSap4 and slower dissociation of the rSap4-inhibitor complex. In contrast, weaker inhibition of the Glomerella cingulata-secreted aspartic peptidase (inhibition constant 7 nM) and the C. albicans rSap1 and Sap2 isoenzymes (inhibition constants 25 and 400 nM, respectively) was, in each case, characterized by a larger dissociation rate constant.

Survey of the 1999 surface plasmon resonance biosensor literature

The application of surface plasmon resonance biosensors in life sciences and pharmaceutical research continues to increase. This review provides a comprehensive list of the commercial 1999 SPR biosensor literature and highlights emerging applications that are of general interest to users of the technology. Given the variability in the quality of published biosensor data, we present some general guidelines to help increase confidence in the results reported from biosensor analyses.

Dynamic character of the complex of human blood coagulation factor VIIa with the extracellular domain of human tissue factor: a normal mode analysis

As an attempt to investigate the dynamic interactions between plasma serine protease, coagulation factor VIIa (VIIa) and its cofactor, tissue factor (TF), we performed normal mode analysis (NMA) of the complex of VIIa with soluble TF (the extracellular part of TF; sTF). We compared fluctuations of Calpha atoms of VIIa or sTF derived from NMA in the VIIa-sTF complex with those of VIIa or sTF in an uncomplexed condition. The atomic fluctuations of the Calpha atoms of sTF complexed with VIIa did not significantly differ from those of sTF without VIIa. In contrast, the atomic fluctuations of VIIa complexed with sTF were much smaller than those of VIIa without sTF. These results suggest that domain motions of VIIa molecule alone are markedly dampened in the VIIa-sTF complex and that the sTF molecule is relatively more rigid than the VIIa molecule. This may indicate functions of TF as a cofactor.

A homology modeling method of an icosahedral viral capsid: inclusion of surrounding protein structures

A methodological development is presented for homology modeling of an icosahedrally symmetric assembly of proteins. In the method, a main-chain structure of an asymmetric unit of a protein assembly is constructed and structure refinement is performed, taking the surrounding symmetry-related proteins into consideration with rotational symmetry boundary conditions. To test the procedure, three models of a poliovirus capsid were constructed with different modeling conditions based on the X-ray structure of a rhinovirus capsid. Model S and model N were constructed with and without considering surrounding proteins, respectively. Model N2 was obtained by refinement in rotational symmetry boundary conditions of the structure of model N. The three models were compared with the X-ray structure of a poliovirus capsid. Root mean square deviations and C alpha distances indicate that model S is the most accurate. Examination of the intermolecular short contacts indicates that model S and model N2 are superior to model N, because they do not make severe intermolecular short contacts. Symmetric intermolecular interactions are important for both the structural fragment search and energy minimization to predict better loop structures. The programs developed in this study are thus valuable in homology modeling of an icosahedral viral capsid.