1
|
Daneshvar A, Farokhi M, Bonakdar S, Vossoughi M. Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering. Int J Biol Macromol 2024; 277:134412. [PMID: 39097043 DOI: 10.1016/j.ijbiomac.2024.134412] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2024] [Revised: 07/09/2024] [Accepted: 07/31/2024] [Indexed: 08/05/2024]
Abstract
Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.
Collapse
Affiliation(s)
- Anahita Daneshvar
- Center for Nanoscience and Nanotechnology, Institute for Convergence Science & Technology, Sharif University of Technology, Tehran 14588-89694, Iran
| | - Mehdi Farokhi
- National Cell Bank of Iran, Pasteur Institute of Iran, Tehran, Iran.
| | - Shahin Bonakdar
- National Cell Bank of Iran, Pasteur Institute of Iran, Tehran, Iran
| | - Manouchehr Vossoughi
- Center for Nanoscience and Nanotechnology, Institute for Convergence Science & Technology, Sharif University of Technology, Tehran 14588-89694, Iran; Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran.
| |
Collapse
|
2
|
Shobeirean A, Attar H, Varshochian R, Rezvanfar MA. Glatiramer acetate in situ forming gel, a new approach for multiple sclerosis treatment. Daru 2024:10.1007/s40199-024-00532-z. [PMID: 39225953 DOI: 10.1007/s40199-024-00532-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2024] [Accepted: 07/25/2024] [Indexed: 09/04/2024] Open
Abstract
BACKGROUND Glatiramer acetate (GA), a commonly used treatment for multiple sclerosis (MS), requires long-term frequent injections to ensure its effectiveness. This often leads to adverse effects, patient noncompliance, and economic inefficiency. OBJECTIVES In this study, poloxamer, as a thermosensitive polymer modified by chitosan (CS) and hyaluronic acid (HA), was employed to prepare an in situ forming prolonged release formulation of GA to overcome the problems derived from frequent repeated injections and to enhance the patient compliance. METHODS The sol-gel formulation was produced through a cold method and optimized using design of experiments. The final product was characterized in terms of gelation time (GT), rheological behaviors, morphological properties, assay, and drug release kinetics. RESULTS The in vitro release rate of GA during the first 24 h was quite rapid, but then it continued at a slower rate of 0.05 mg ml-1h-1. The in vivo analysis after the subcutaneous injections showed lower levels of IL-5, IL-13, and uric acid (UA) in mice treated with the gel formulation compared with those receiving free GA in the first few days. However, after 10 days, significantly higher concentrations were detected, which continued to increase slowly. CONCLUSION It can be concluded that the designed thermosensitive sol-gel formula is capable of extending the effectiveness of GA and can be considered as a promising sustained release formulation for the treatment of MS.
Collapse
Affiliation(s)
- Anahita Shobeirean
- Department of Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Hossein Attar
- Department of Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Reyhaneh Varshochian
- Department of Pharmaceutics and Pharmaceutical Nanotechnology, School of Pharmacy, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
| | - Mohammad Amin Rezvanfar
- Department of Toxicology and Pharmacology, Faculty of Pharmacy, Pharmaceutical Sciences Research Center, Tehran University of Medical Sciences, Tehran, Iran
| |
Collapse
|
3
|
Jahanbekam S, Mozafari N, Bagheri-Alamooti A, Mohammadi-Samani S, Daneshamooz S, Heidari R, Azarpira N, Ashrafi H, Azadi A. Ultrasound-responsive hyaluronic acid hydrogel of hydrocortisone to treat osteoarthritis. Int J Biol Macromol 2023; 240:124449. [PMID: 37072059 DOI: 10.1016/j.ijbiomac.2023.124449] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2022] [Revised: 04/10/2023] [Accepted: 04/11/2023] [Indexed: 04/20/2023]
Abstract
One of the practical ways to manage the disease flares of arthritis is using an intra-articular depot formulation of glucocorticoids. Hydrogels, as controllable drug delivery systems, are hydrophilic polymers with distinctive properties, such as remarkable water capacity and biocompatibility. This study aimed to design an injectable thermo-ultrasound-triggered drug carrier based on Pluronic® F-127, hyaluronic acid, and gelatin. The in situ hydrogel loaded by hydrocortison was developed and D-optimal design was used to formulate the process. The optimized hydrogel was combined with four different surfactants to better regulate the release rate. In situ gels composed of the hydrocortisone-loaded hydrogel and hydrocortisone-loaded mixed-micelle hydrogel were characterized. The hydrocortisone-loaded hydrogel and selected hydrocortisone-loaded mixed-micelle hydrogel showed a spherical shape and were nano-sized with a unique thermo-responsive nature able to prolong drug release. The ultrasound-triggered release study showed that drug release was time-dependent. By inducing osteoarthritis in a rat model, behavioral tests and histopathological analyses were carried out on the hydrocortisone-loaded hydrogel and a particular hydrocortisone-loaded mixed-micelle hydrogel. In vivo results showed that the selected hydrocortisone-loaded mixed-micelle hydrogel improved the status of the disease. Results highlighted the potential of ultrasound-responsive in situ-forming hydrogels as hopeful formulas for efficient treatment of arthritis.
Collapse
Affiliation(s)
- Sheida Jahanbekam
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Negin Mozafari
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Azar Bagheri-Alamooti
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Soliman Mohammadi-Samani
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran; Pharmaceutical Sciences Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Saeid Daneshamooz
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Reza Heidari
- Pharmaceutical Sciences Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Negar Azarpira
- Transplant Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Hajar Ashrafi
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran.
| | - Amir Azadi
- Department of Pharmaceutics, School of Pharmacy, Shiraz University of Medical Sciences, Shiraz, Iran; Pharmaceutical Sciences Research Center, Shiraz University of Medical Sciences, Shiraz, Iran.
| |
Collapse
|
4
|
Djoudi A, Molina-Peña R, Ferreira N, Ottonelli I, Tosi G, Garcion E, Boury F. Hyaluronic Acid Scaffolds for Loco-Regional Therapy in Nervous System Related Disorders. Int J Mol Sci 2022; 23:12174. [PMID: 36293030 PMCID: PMC9602826 DOI: 10.3390/ijms232012174] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Revised: 09/25/2022] [Accepted: 09/28/2022] [Indexed: 11/16/2022] Open
Abstract
Hyaluronic acid (HA) is a Glycosaminoglycan made of disaccharide units containing N-acetyl-D-glucosamine and glucuronic acid. Its molecular mass can reach 10 MDa and its physiological properties depend on its polymeric property, polyelectrolyte feature and viscous nature. HA is a ubiquitous compound found in almost all biological tissues and fluids. So far, HA grades are produced by biotechnology processes, while in the human organism it is a major component of the extracellular matrix (ECM) in brain tissue, synovial fluid, vitreous humor, cartilage and skin. Indeed, HA is capable of forming hydrogels, polymer crosslinked networks that are very hygroscopic. Based on these considerations, we propose an overview of HA-based scaffolds developed for brain cancer treatment, central and peripheral nervous systems, discuss their relevance and identify the most successful developed systems.
Collapse
Affiliation(s)
- Amel Djoudi
- Inserm UMR 1307, CNRS UMR 6075, Université de Nantes, CRCI2NA, Université d’Angers, 49000 Angers, France
| | - Rodolfo Molina-Peña
- Inserm UMR 1307, CNRS UMR 6075, Université de Nantes, CRCI2NA, Université d’Angers, 49000 Angers, France
| | - Natalia Ferreira
- Inserm UMR 1307, CNRS UMR 6075, Université de Nantes, CRCI2NA, Université d’Angers, 49000 Angers, France
| | - Ilaria Ottonelli
- Nanotech Lab, Te.Far.T.I., Department Life Sciences, University of Modena and Reggio Emilia, 41125 Modena, Italy
- Clinical and Experimental Medicine PhD Program, University of Modena and Reggio Emilia, 41125 Modena, Italy
| | - Giovanni Tosi
- Nanotech Lab, Te.Far.T.I., Department Life Sciences, University of Modena and Reggio Emilia, 41125 Modena, Italy
| | - Emmanuel Garcion
- Inserm UMR 1307, CNRS UMR 6075, Université de Nantes, CRCI2NA, Université d’Angers, 49000 Angers, France
| | - Frank Boury
- Inserm UMR 1307, CNRS UMR 6075, Université de Nantes, CRCI2NA, Université d’Angers, 49000 Angers, France
| |
Collapse
|
5
|
Singla P, Garg S, McClements J, Jamieson O, Peeters M, Mahajan RK. Advances in the therapeutic delivery and applications of functionalized Pluronics: A critical review. Adv Colloid Interface Sci 2022; 299:102563. [PMID: 34826745 DOI: 10.1016/j.cis.2021.102563] [Citation(s) in RCA: 28] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Revised: 10/15/2021] [Accepted: 11/13/2021] [Indexed: 12/22/2022]
Abstract
Pluronic (PEO-PPO-PEO) block copolymers can form nano-sized micelles with a structure composed of a hydrophobic PPO core and hydrophilic PEO shell layer. Pluronics are U.S. Food and Drug Administration approved polymers, which are widely used for solubilization of drugs and their delivery, gene/therapeutic delivery, diagnostics, and tissue engineering applications due to their non-ionic properties, non-toxicity, micelle forming ability, excellent biocompatibility and biodegradability. Although Pluronics have been employed as drug carrier systems for several decades, numerous issues such as rapid dissolution, shorter residence time in biological media, fast clearance and weak mechanical strength have hindered their efficacy. Pluronics have been functionalized with pH-sensitive, biological-responsive moieties, antibodies, aptamers, folic acid, drugs, different nanoparticles, and photo/thermo-responsive hydrogels. These functionalization strategies enable Pluronics to act as stimuli responsive and targeted drug delivery vehicles. Moreover, Pluronics have emerged in nano-emulsion formulations and have been utilized to improve the properties of cubosomes, dendrimers and nano-sheets, including their biocompatibility and aqueous solubility. Functionalization of Pluronics results in the significant improvement of target specificity, loading capacity, biocompatibility of nanoparticles and stimuli responsive hydrogels for the promising delivery of a range of drugs. Therefore, this review presents an overview of all advancements (from the last 15 years) in functionalized Pluronics, providing a valuable tool for industry and academia in order to optimize their use in drug or therapeutic delivery, in addition to several other biomedical applications.
Collapse
Affiliation(s)
- Pankaj Singla
- School of Engineering, Merz Court, Claremont Road, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
| | - Saweta Garg
- Department of Pharmaceutical Sciences, Guru Nanak Dev University, Amritsar 143005, India
| | - Jake McClements
- School of Engineering, Merz Court, Claremont Road, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
| | - Oliver Jamieson
- School of Engineering, Merz Court, Claremont Road, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
| | - Marloes Peeters
- School of Engineering, Merz Court, Claremont Road, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom.
| | - Rakesh Kumar Mahajan
- Department of Chemistry, UGC-Centre for Advanced Studies-I, Guru Nanak Dev University, Amritsar 143005, India.
| |
Collapse
|
6
|
Al-Rajabi MM, Teow YH. Green Synthesis of Thermo-Responsive Hydrogel from Oil Palm Empty Fruit Bunches Cellulose for Sustained Drug Delivery. Polymers (Basel) 2021; 13:2153. [PMID: 34210003 PMCID: PMC8271751 DOI: 10.3390/polym13132153] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Revised: 06/02/2021] [Accepted: 06/04/2021] [Indexed: 01/18/2023] Open
Abstract
Drug delivery is a difficult task in the field of dermal therapeutics, particularly in the treatment of burns, wounds, and skin diseases. Conventional drug delivery mediums have some limitations, including poor retention on skin/wound, inconvenience in administration, and uncontrolled drug release profile. Hydrogels able to absorb large amount of water and give a spontaneous response to stimuli imposed on them are an attractive solution to overcome the limitations of conventional drug delivery media. The objective of this study is to explore a green synthesis method for the development of thermo-responsive cellulose hydrogel using cellulose extracted from oil palm empty fruit bunches (OPEFB). A cold method was employed to prepare thermo-responsive cellulose hydrogels by incorporating OPEFB-extracted cellulose and Pluronic F127 (PF127) polymer. The performance of the synthesized thermo-responsive cellulose hydrogels were evaluated in terms of their swelling ratio, percentage of degradation, and in-vitro silver sulfadiazine (SSD) drug release. H8 thermo-responsive cellulose hydrogel with 20 w/v% PF127 and 3 w/v% OPEFB extracted cellulose content was the best formulation, given its high storage modulus and complex viscosity (81 kPa and 9.6 kPa.s, respectively), high swelling ratio (4.22 ± 0.70), and low degradation rate (31.3 ± 5.9%), in addition to high t50% value of 24 h in SSD in-vitro drug release to accomplish sustained drug release. The exploration of thermo-responsive cellulose hydrogel from OPEFB would promote cost-effective and sustainable drug delivery system with using abundantly available agricultural biomass.
Collapse
Affiliation(s)
- Maha Mohammad Al-Rajabi
- Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor Darul Ehsan, Malaysia;
| | - Yeit Haan Teow
- Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor Darul Ehsan, Malaysia;
- Research Centre for Sustainable Process Technology (CESPRO), Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor Darul Ehsan, Malaysia
| |
Collapse
|
7
|
Mucoadhesive Poloxamer-Based Hydrogels for the Release of HP-β-CD-Complexed Dexamethasone in the Treatment of Buccal Diseases. Pharmaceutics 2021; 13:pharmaceutics13010117. [PMID: 33477667 PMCID: PMC7831945 DOI: 10.3390/pharmaceutics13010117] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2020] [Revised: 01/07/2021] [Accepted: 01/12/2021] [Indexed: 11/17/2022] Open
Abstract
Oral lichen planus (OLP) is an ongoing and chronic inflammatory disease affecting the mucous membrane of the oral cavity. Currently, the treatment of choice consists in the direct application into the buccal cavity of semisolid formulations containing a corticosteroid molecule to decrease inflammatory signs and symptoms. However, this administration route has shown various disadvantages limiting its clinical use and efficacy. Indeed, the frequency of application and the incorrect use of the preparation may lead to a poor efficacy and limit the treatment compliance. Furthermore, the saliva clearance and the mechanical stress present in the buccal cavity also involve a decrease in the mucosal exposure to the drug. In this context, the design of a new pharmaceutical formulation, containing a steroidal anti-inflammatory, mucoadhesive, sprayable and exhibiting a sustained and controlled release seems to be suitable to overcome the main limitations of the existing pharmaceutical dosage forms. The present work reports the formulation, optimization and evaluation of the mucoadhesive and release properties of a poloxamer 407 thermosensitive hydrogel containing a poorly water-soluble corticosteroid, dexamethasone acetate (DMA), threaded into hydroxypropyl-beta-cyclodextrin (HP-β-CD) molecules. Firstly, physicochemical properties were assessed to ensure suitable complexation of DMA into HP-β-CD cavities. Then, rheological properties, in the presence and absence of various mucoadhesive agents, were determined and optimized. The hydration ratio (0.218-0.191), the poloxamer 407 (15-17 wt%) percentage and liquid-cyclodextrin state were optimized as a function of the gelation transition temperature, viscoelastic behavior and dynamic flow viscosity. Deformation and resistance properties were evaluated in the presence of various mucoadhesive compounds, being the sodium alginate and xanthan gum the most suitable to improve adhesion and mucoadhesion properties. Xanthan gum was shown as the best agent prolonging the hydrogel retention time up to 45 min. Furthermore, xanthan gum has been found as a relevant polymer matrix controlling drug release by diffusion and swelling processes in order to achieve therapeutic concentration for prolonged periods of time.
Collapse
|
8
|
Khan S, Akhtar N, Minhas MU, Shah H, Khan KU, Thakur RRS. A difunctional Pluronic ®127-based in situ formed injectable thermogels as prolonged and controlled curcumin depot, fabrication, in vitro characterization and in vivo safety evaluation. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2020; 32:281-319. [PMID: 32976729 DOI: 10.1080/09205063.2020.1829324] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
Abstract
Curcumin has been reported to be used widely against many types of pathological conditions in clinics. However, due to its limitations such as poor solubility, poor oral absorption and low stability have limited its applications. In the current study, a series of novel chemically cross-linkable depot gel formulations were developed based on thermoresponsive micellar polymer (Pluronic®127) with polyelectrolyte hydrophilic monomer, that is, 2-acrylamido-2-methylpropane sulfonic acid by cold and in situ grafting polymerization method. The formulations were aimed to deliver curcumin at controlled rate from in situ formed depot after administration through subcutaneous route in vivo. The sol-gel phase transitions of formulations were observed by rheological analysis, tube titling and optical transmittance measurements. Maximum swelling of gel formulations was observed at pH 7.4 and below CGT, that is, 25 °C. The in vitro release profile exhibits maximum drug release at pH 7.4 and 25 °C owing to relaxed gel state. In vitro degradation profile of gel formulations showed controlled degradation rate. Cell growth inhibition study confirmed the biocompatibility and safe nature of bare gel formulations against L929 cell lines. In vitro cytotoxic study showed that curcumin loaded in gel formulation has controlled pharmacological activity against HeLa and MCF-7 cancer cells as compared to free drug solution. The IC50 values calculated for pure curcumin solution (30 ± 0.77 µg/ml for HeLa and 27 ± 0.39 µg/ml for MCF-7) were found higher in comparison to curcumin-loaded thermogels against HeLa (19 ± 0.28 µg/ml and 23 ± 0.81 µg/ml) and MCF-7 (22 ± 0.54 µg/ml and 21 ± 0.49 µg/ml). Histopathological and hematological analysis showed the biocompatible nature of hydrogels. Structural confirmation was done by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance spectroscopy (1H NMR). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) confirmed the thermal stability of the gel formulation. The porous structure of gel formulations was assessed by scanning electron microscopic (SEM) analysis. Results concluded that newly developed gel formulations have thermoresponsive behavior with phase transition at body temperature and can be used as in situ controlled drug depot.
Collapse
Affiliation(s)
- Samiullah Khan
- Department of Pharmacy, The University of Lahore, Gujrat Campus, Gujrat, Pakistan
| | - Naveed Akhtar
- Faculty of Pharmacy and Alternative Medicine, The Islamia University of Bahawalpur, Bahawalpur, Pakistan
| | | | - Hassan Shah
- Faculty of Pharmacy and Alternative Medicine, The Islamia University of Bahawalpur, Bahawalpur, Pakistan
| | - Kifayat Ullah Khan
- Faculty of Pharmacy and Alternative Medicine, The Islamia University of Bahawalpur, Bahawalpur, Pakistan
| | | |
Collapse
|
9
|
Chou HY, Weng CC, Lai JY, Lin SY, Tsai HC. Design of an Interpenetrating Polymeric Network Hydrogel Made of Calcium-Alginate from a Thermos-Sensitive Pluronic Template as a Thermal-Ionic Reversible Wound Dressing. Polymers (Basel) 2020; 12:E2138. [PMID: 32962070 PMCID: PMC7570184 DOI: 10.3390/polym12092138] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Revised: 09/16/2020] [Accepted: 09/16/2020] [Indexed: 12/11/2022] Open
Abstract
Polymer-based hydrogels demonstrate superior performance when used as wound dressing. An ideal dressing should possess an active healing function, absorb wound exudates, and provide a moist interface on the wound for rapid injury repair and the prevention of pain and injury during replacement of the dressing. Thus, the aim of this study was to develop a novel, reversible, smart, interpenetrating polymeric network (IPN) by utilizing the thermosensitive network of pluronic F127 (PF127) as a template to regulate the conformation of calcium-ion-crosslinked alginate. We found that the IPN hydrogels formed soft and elastic thermosensitive networks, retaining their form even after absorbing a large amount of wound exudate. The exterior of the hydrogels was made up of a rigid calcium alginate network that supported the entire hydrogel, promoting the stability of the vascular endothelial growth factor (VEGF) payload and controlling its release when the hydrogel was applied topically to wounds. Raman spectroscopy confirmed the layered structure of the hydrogel, which was found to easily disintegrate even after moderate rinsing of the wound with cold phosphate-buffered saline. Taken together, these results show that the IPN hydrogel developed in this study could be a promising delivery platform for growth factors to accelerate wound healing.
Collapse
Affiliation(s)
- Hsiao-Ying Chou
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan; (H.-Y.C.); (C.-C.W.); (J.-Y.L.)
| | - Chang-Chih Weng
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan; (H.-Y.C.); (C.-C.W.); (J.-Y.L.)
| | - Juin-Yih Lai
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan; (H.-Y.C.); (C.-C.W.); (J.-Y.L.)
- Advanced Membrane Materials Center, National Taiwan University of Science and Technology, Taipei 106, Taiwan
- R&D Center for Membrane Technology, Chung Yuan Christian University, Chungli, Taoyuan 320, Taiwan
| | - Shuian-Yin Lin
- Biomedical Technology and Device Research Center, Industrial Technology Research Institute, Hsinchu 310, Taiwan
| | - Hsieh-Chih Tsai
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan; (H.-Y.C.); (C.-C.W.); (J.-Y.L.)
- Advanced Membrane Materials Center, National Taiwan University of Science and Technology, Taipei 106, Taiwan
- R&D Center for Membrane Technology, Chung Yuan Christian University, Chungli, Taoyuan 320, Taiwan
| |
Collapse
|
10
|
Dual Network Hydrogels Incorporated with Bone Morphogenic Protein-7-Loaded Hyaluronic Acid Complex Nanoparticles for Inducing Chondrogenic Differentiation of Synovium-Derived Mesenchymal Stem Cells. Pharmaceutics 2020; 12:pharmaceutics12070613. [PMID: 32630047 PMCID: PMC7407334 DOI: 10.3390/pharmaceutics12070613] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2020] [Revised: 06/19/2020] [Accepted: 06/26/2020] [Indexed: 01/30/2023] Open
Abstract
Alginate-poloxamer (ALG-POL) copolymer with optimal POL content was synthesized, and it was combined with silk fibroin (SF) for building ALG-POL/SF dual network hydrogels. Hyaluronic acid(HA)/chitosan-poly(dioxanone)(CH-PDO) complex nanoparticles (NPs) with optimized composition and high encapsulation efficiency were employed as a vehicle for loading bone morphogenic protein-7 (BMP-7). BMP-7-loaded HA/CH-PDO NPs were incorporated into ALG-POL/SF hydrogel for constructing composite gels to achieve controlled release of BMP-7. These gels showed thermosensitive sol-gel transitions near physiological temperature and pH; and they were tested to be elastic, tough and strong. Some gels exhibited abilities to administer the BMP-7 release in nearly linear manners for a few weeks. Synovium-derived mesenchymal stem cells (SMSCs) were seeded into optimally fabricated gels for assessing their chondrogenic differentiation potency. Real-time PCR analyses showed that the blank ALG-POL/SF gels were not able to induce the chondrogenic differentiation of SMSCs, whereas SMSCs were detected to significantly express cartilage-related genes once they were seeded in the BMP-7-loaded ALG-POL/SF gel for two weeks. The synthesis of cartilaginous matrix components further confirmed that SMSCs seeded in the BMP-7-loaded ALG-POL/SF gel differentiated toward chondrogenesis. Results suggest that BMP-7-loaded ALG-POL/SF composite gels can function as a promising biomaterial for cartilage tissue engineering applications.
Collapse
|
11
|
Min Q, Yu X, Liu J, Zhang Y, Wan Y, Wu J. Controlled Delivery of Insulin-like Growth Factor-1 from Bioactive Glass-Incorporated Alginate-Poloxamer/Silk Fibroin Hydrogels. Pharmaceutics 2020; 12:pharmaceutics12060574. [PMID: 32575684 PMCID: PMC7355909 DOI: 10.3390/pharmaceutics12060574] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2020] [Revised: 05/30/2020] [Accepted: 06/11/2020] [Indexed: 02/06/2023] Open
Abstract
Thermosensitive alginate–poloxamer (ALG–POL) copolymer with an optimal POL content was synthesized, and it was used to combine with silk fibroin (SF) for building ALG–POL/SF hydrogels with dual network structure. Mesoporous bioactive glass (BG) nanoparticles (NPs) with a high level of mesoporosity and large pore size were prepared and they were employed as a vehicle for loading insulin-like growth factor-1 (IGF-1). IGF-1-loaded BG NPs were embedded into ALG–POL/SF hydrogels to achieve the controlled delivery of IGF-1. The resulting IGF-1-loaded BG/ALG–POL/SF gels were found to be injectable with their sol-gel transition near physiological temperature and pH. Rheological measurements showed that BG/ALG–POL/SF gels had their elastic modulus higher than 5kPa with large ratio of elastic modulus to viscous modulus, indicative of their mechanically strong features. The dry BG/ALG–POL/SF gels were seen to be highly porous with well-interconnected pore characteristics. The gels loaded with varied amounts of IGF-1 showed abilities to administer IGF-1 release in approximately linear manners for a few weeks while effectively preserving the bioactivity of encapsulated IGF-1. Results suggest that such constructed BG/ALG–POL/SF gels can function as a promising injectable biomaterial for bone tissue engineering applications.
Collapse
Affiliation(s)
- Qing Min
- School of Pharmacy, Hubei University of Science and Technology, Xianning 437100, China; (Q.M.); (Y.Z.)
| | - Xiaofeng Yu
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China; (X.Y.); (J.L.)
| | - Jiaoyan Liu
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China; (X.Y.); (J.L.)
| | - Yuchen Zhang
- School of Pharmacy, Hubei University of Science and Technology, Xianning 437100, China; (Q.M.); (Y.Z.)
| | - Ying Wan
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China; (X.Y.); (J.L.)
- Correspondence: (Y.W.); (J.W.)
| | - Jiliang Wu
- School of Pharmacy, Hubei University of Science and Technology, Xianning 437100, China; (Q.M.); (Y.Z.)
- Correspondence: (Y.W.); (J.W.)
| |
Collapse
|
12
|
Liu J, Fang Q, Lin H, Yu X, Zheng H, Wan Y. Alginate-poloxamer/silk fibroin hydrogels with covalently and physically cross-linked networks for cartilage tissue engineering. Carbohydr Polym 2020; 247:116593. [PMID: 32829786 DOI: 10.1016/j.carbpol.2020.116593] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2020] [Revised: 05/02/2020] [Accepted: 06/03/2020] [Indexed: 11/28/2022]
Abstract
Poloxamer was grafted onto alginate and the optimally synthesized alginate-poloxamer (ALG-POL) copolymer was combined with silk fibroin (SF) to produce thermosensitive ALG-POL/SF hydrogels with covalently and physically crosslinked networks. The formulated ALG-POL/SF gels were found to be injectable with sol-gel transitions near physiological temperature and pH. Rheological measurements showed that some ALG-POL/SF gels had their elastic modulus of around 5 kPa or higher with large ratio of elastic modulus to viscous modulus, indicative of their mechanically strong feature. The achieved ALG-POL/SF gels exhibited concurrent enhancement in strength and elasticity when compared to the gels built with either ALG-POL or SF alone. The microscopic insight into dry ALG-POL/SF gels validated that they were highly porous with well-interconnected pore characteristics. These ALG-POL/SF gels showed abilities to support the in-growth of seeded chondrocytes while effectively maintaining their chondrogenic phenotype. Results suggest promising attributes of ALG-POL/SF gels as alternative biomaterial for cartilage tissue engineering.
Collapse
Affiliation(s)
- Jiaoyan Liu
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| | - Qing Fang
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| | - Hui Lin
- Department of Orthopedics, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, 430022, PR China
| | - Xiaofeng Yu
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| | - Hong Zheng
- Department of Pathophysiology, Anhui Medical University, Hefei, 230032, PR China.
| | - Ying Wan
- College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, PR China.
| |
Collapse
|
13
|
Hsieh HY, Lin WY, Lee AL, Li YC, Chen Y, Chen KC, Young TH. Hyaluronic acid on the urokinase sustained release with a hydrogel system composed of poloxamer 407: HA/P407 hydrogel system for drug delivery. PLoS One 2020; 15:e0227784. [PMID: 32160196 PMCID: PMC7065803 DOI: 10.1371/journal.pone.0227784] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2019] [Accepted: 02/23/2020] [Indexed: 11/18/2022] Open
Abstract
Pleural empyema is an inflammatory condition characterized by accumulation of pus inside the pleural cavity, which is usually followed by bacterial pneumonia. During the disease process, the pro-inflammatory and pro-fibrotic cytokines in the purulent pleural effusion cause proliferation of fibroblasts and deposition of extracellular matrix, which lead to fibrin deposition and fibrothorax. Urokinase instillation therapy through a chest drainage tube is frequently used for fibrinolysis in patients with empyema. However, urokinase treatment requires multiple instillation (2-3 times per day, for 4-8 days) and easily flows out from the chest drainage tube due to its high water solubility. In this in vitro study, we developed a thermo-responsive hydrogel based on poloxamer 407 (P407) combined with hyaluronic acid (HA) for optimal loading and release of urokinase. Our results show that the addition of HA to poloxamer gels provides a significantly more compact microstructure, with smaller pore sizes (**p < 0.001). The differential scanning calorimetry (DSC) profile revealed no influence on the micellization intensity of poloxamer gel by HA. The 25% poloxamer-based gel was significantly superior to the 23% poloxamer-based gel, with slower gel erosion when comparing the 16th hour residual gel weight of both gels (*p < 0.05; **p < 0.001). The 25% poloxamer-HA gel also exhibited a superior urokinase release profile and longer release time. A Fourier-transform infrared spectroscopy (FT-IR) study of the P407/HA hydrogel showed no chemical interactions between P407 and HA in the hydrogel system. The thermoresponsive P407/HA hydrogel may have a promising potential in the loading and delivery of hydrophilic drugs. On top of that, in vitro toxicity test of this combination demonstrates a lower toxicity.
Collapse
Affiliation(s)
- Hao-Ying Hsieh
- Department of Biomedical Engineering, National Taiwan University, Taipei, Taiwan
| | - Wei-Yang Lin
- Department of Biomedical Engineering, National Taiwan University, Taipei, Taiwan
- Department of Thoracic Surgery, Lo-Hsu Medical Foundation, Lotung Poh-Ai Hospital, Lotung, Taiwan
| | - An Li Lee
- Department of Biomedical Engineering, National Taiwan University, Taipei, Taiwan
- Division of Plastic Surgery, Department of Surgery, Mackay Memorial Hospital, Taipei, Taiwan
| | - Yi-Chen Li
- Department of Chemical Engineering, Feng Chia University, Taichung, Taiwan
| | - Yi‐Jane Chen
- Department of Dentistry, National Taiwan University Hospital, Taipei, Taiwan
| | - Ke-Cheng Chen
- Department of Biomedical Engineering, National Taiwan University, Taipei, Taiwan
- Department of Surgery, National Taiwan University Hospital, Taipei, Taiwan
| | - Tai-Horng Young
- Department of Biomedical Engineering, National Taiwan University, Taipei, Taiwan
| |
Collapse
|
14
|
Chatterjee S, Chi-Leung Hui P. Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application. Molecules 2019; 24:E2547. [PMID: 31336916 PMCID: PMC6681499 DOI: 10.3390/molecules24142547] [Citation(s) in RCA: 80] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2019] [Revised: 06/27/2019] [Accepted: 07/11/2019] [Indexed: 12/22/2022] Open
Abstract
This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.
Collapse
Affiliation(s)
- Sudipta Chatterjee
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
| | - Patrick Chi-Leung Hui
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong.
| |
Collapse
|
15
|
Thompson AL, Mensah LM, Love BJ. The effect of cisplatin on the nanoscale structure of aqueous PEO-PPO-PEO micelles of varying hydrophilicity observed using SAXS. SOFT MATTER 2019; 15:3970-3977. [PMID: 31017159 DOI: 10.1039/c9sm00071b] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Aqueous solutions of polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO) copolymers form micelles and cubic lattices as their temperature is raised. The presence of added solutes within the dispersions can also affect the kinetics of structure formation. Here, we investigate the structures formed in the amphiphiles P104, P105, and F108 solutions at 31% mass per v both neat and co-formulated with the drug cisplatin (0.02% to 0.1% mass per v) using small-angle X-ray scattering. P104 formed BCC colloidal crystals while P105 and F108 formed FCC structures. Cisplatin had a minor influence of the formation and stability of the crystals during these thermal excursions. The largest interaction between the amphiphiles and cisplatin was P104 where there was a 2% reduction in the BCC lattice parameter of P104 as cisplatin loading rose to 0.1% at 28 °C. The F108 unit cell swelled ∼2% upon cisplatin loading of 0.1%. A progressive evolution and breakdown of these structures was noted as the temperature rose from 10 °C to 35 °C. For the different amphiphiles, crystal thermal expansion coefficients of ∼1 × 10-2 °C-1 were determined in neat and loaded amphiphiles with cisplatin and all the crystals swelled with increasing temperature.
Collapse
Affiliation(s)
- Andre L Thompson
- Department of Materials Science and Engineering, University of Michigan, Room 2046 H. H. Dow Bldg, Ann Arbor, MI 48109, USA.
| | | | | |
Collapse
|
16
|
Moura M, Gil M, Figueiredo M. Cisplatin delivery systems based on different drug encapsulation techniques. Eur Polym J 2019. [DOI: 10.1016/j.eurpolymj.2019.02.007] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
17
|
Nascimento M, Franco M, Yokaichyia F, de Paula E, Lombello C, de Araujo D. Hyaluronic acid in Pluronic F-127/F-108 hydrogels for postoperative pain in arthroplasties: Influence on physico-chemical properties and structural requirements for sustained drug-release. Int J Biol Macromol 2018; 111:1245-1254. [DOI: 10.1016/j.ijbiomac.2018.01.064] [Citation(s) in RCA: 38] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2017] [Revised: 11/27/2017] [Accepted: 01/10/2018] [Indexed: 01/03/2023]
|
18
|
Chatterjee S, Hui PCL, Kan CW. Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy. Polymers (Basel) 2018; 10:E480. [PMID: 30966514 PMCID: PMC6415431 DOI: 10.3390/polym10050480] [Citation(s) in RCA: 76] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2018] [Revised: 04/21/2018] [Accepted: 04/25/2018] [Indexed: 01/19/2023] Open
Abstract
Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels. In textile field applications of thermoresponsive hydrogels, textile based transdermal therapy is currently being applied using drug loaded thermoresponsive hydrogels. The current review focuses on the preparation, physico-chemical properties and various biomedical applications of thermoresponsive hydrogels based on natural and synthetic polymers and especially, their applications in developing functionalized textiles for transdermal therapies. Finally, future prospects of dual responsive (pH/temperature) hydrogels made by these polymers for textile based transdermal treatments are mentioned in this review.
Collapse
Affiliation(s)
- Sudipta Chatterjee
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong, China.
| | - Patrick Chi-Leung Hui
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong, China.
| | - Chi-Wai Kan
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong, China.
| |
Collapse
|
19
|
Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy. Polymers (Basel) 2018. [PMID: 30966514 DOI: 10.3390/polym10050480]] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022] Open
Abstract
Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels. In textile field applications of thermoresponsive hydrogels, textile based transdermal therapy is currently being applied using drug loaded thermoresponsive hydrogels. The current review focuses on the preparation, physico-chemical properties and various biomedical applications of thermoresponsive hydrogels based on natural and synthetic polymers and especially, their applications in developing functionalized textiles for transdermal therapies. Finally, future prospects of dual responsive (pH/temperature) hydrogels made by these polymers for textile based transdermal treatments are mentioned in this review.
Collapse
|
20
|
Santoveña A, Monzón C, Delgado A, Evora C, Llabrés M, Fariña J. Development of a standard method for in vitro evaluation of Triamcinolone and BMP-2 diffusion mechanism from thermosensitive and biocompatible composite hyaluronic acid-pluronic hydrogels. J Drug Deliv Sci Technol 2017. [DOI: 10.1016/j.jddst.2017.04.022] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
21
|
Mathew AP, Uthaman S, Cho KH, Cho CS, Park IK. Injectable hydrogels for delivering biotherapeutic molecules. Int J Biol Macromol 2017; 110:17-29. [PMID: 29169942 DOI: 10.1016/j.ijbiomac.2017.11.113] [Citation(s) in RCA: 141] [Impact Index Per Article: 20.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2017] [Revised: 10/24/2017] [Accepted: 11/17/2017] [Indexed: 12/19/2022]
Abstract
To date, numerous delivery systems based on either organic or inorganic material have been developed to achieve efficient and sustained delivery of therapeutics. Hydrogels, which are three dimensional networks of crosslinked hydrophilic polymers, have a significant role in solving the clinical and pharmacological limitations of present systems because of their biocompatibility, ease of preparation and unique physical properties such as a tunable porous nature and affinity for biological fluids. Development of an in situ forming injectable hydrogel system has allowed excellent spatial and temporal control, unlike systemically administered therapeutics. Injectable hydrogel systems can offset difficulties with conventional hydrogel-based drug delivery systems in the clinic by forming a drug/gene delivery or cell-growing depot in the body with a single injection, thereby enabling patient compliance and comfort. Carbohydrate polymers are widely used for the synthesis of injectable in situ-forming hydrogels because of ready availability, presence of modifiable functional groups, biocompatibility and other physiochemical properties. In this review, we discuss different aspects of injectable hydrogels, such as bulk hydrogels/macrogels, microgels, and nanogels derived from natural polymers, and their importance in the delivery of therapeutics such as genes, drugs, cells or other biomolecules and how these revolutionary systems can complement existing therapeutic delivery systems.
Collapse
Affiliation(s)
- Ansuja Pulickal Mathew
- Department of Biomedical Sciences, BK 21 PLUS Center for Creative Biomedical Scientists at Chonnam National University, Research Institute of Medical Sciences, Chonnam National University Medical School, Gwangju 61469, Republic of Korea
| | - Saji Uthaman
- Department of Polymer Science and Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon, 34134, Republic of Korea
| | - Ki-Hyun Cho
- Department of Plastic Surgery, Institute of Dermatology and Plastic Surgery, Cleveland Clinic, 9500 Euclid Ave, Cleveland, OH 44195, USA
| | - Chong-Su Cho
- Department of Agricultural Biotechnology and Research Institute for Agriculture and Life Sciences, Seoul National University, Seoul 08826, Republic of Korea.
| | - In-Kyu Park
- Department of Biomedical Sciences, BK21 PLUS Center for Creative Biomedical Scientists at Chonnam National University, Research Institute of Medical Sciences, Chonnam National University Medical School, Gwangju 61469, Republic of Korea.
| |
Collapse
|
22
|
Lee MH, Shin GH, Park HJ. Solid lipid nanoparticles loaded thermoresponsive pluronic-xanthan gum hydrogel as a transdermal delivery system. J Appl Polym Sci 2017. [DOI: 10.1002/app.46004] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Affiliation(s)
- Min Hyeock Lee
- College of Life Sciences and Biotechnology; Korea University; 5-Ka, Anam-Dong, Sungbuk-Ku, Seoul 136-701 Republic of Korea
| | - Gye Hwa Shin
- Department of Food and Nutrition; Kunsan National University; Kunsan 54150 Republic of Korea
| | - Hyun Jin Park
- College of Life Sciences and Biotechnology; Korea University; 5-Ka, Anam-Dong, Sungbuk-Ku, Seoul 136-701 Republic of Korea
| |
Collapse
|
23
|
Taurin S, Almomen AA, Pollak T, Kim SJ, Maxwell J, Peterson CM, Owen SC, Janát-Amsbury MM. Thermosensitive hydrogels a versatile concept adapted to vaginal drug delivery. J Drug Target 2017; 26:533-550. [PMID: 29096548 DOI: 10.1080/1061186x.2017.1400551] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
Vaginal drug delivery represents an attractive strategy for local and systemic delivery of drugs otherwise poorly absorbed after oral administration. The rather dense vascular network, mucus permeability and the physiological phenomenon of the uterine first-pass effect can all be exploited for therapeutic benefit. However, several physiological factors such as an acidic pH, constant secretion, and turnover of mucus as well as varying thickness of the vaginal epithelium can impact sustained drug delivery. In recent years, polymers have been designed to tackle challenges mentioned above. In particular, thermosensitive hydrogels hold great promise due to their stability, biocompatibility, adhesion properties and adjustable drug release kinetics. Here, we discuss the physiological and anatomical uniqueness of the vaginal environment and how it impacts the safe and efficient vaginal delivery and also reviewed several thermosensitive hydrogels deemed suitable for vaginal drug delivery by addressing specific characteristics, which are essential to engage the vaginal environment successfully.
Collapse
Affiliation(s)
- Sebastien Taurin
- a Department of Obstetrics and Gynecology, Division of Gynecologic Oncology , University of Utah Health Sciences , Salt Lake City , UT , USA
| | - Aliyah A Almomen
- a Department of Obstetrics and Gynecology, Division of Gynecologic Oncology , University of Utah Health Sciences , Salt Lake City , UT , USA.,b Department of Pharmaceutics and Pharmaceutical Chemistry , University of Utah , Salt Lake City , UT , USA
| | - Tatianna Pollak
- a Department of Obstetrics and Gynecology, Division of Gynecologic Oncology , University of Utah Health Sciences , Salt Lake City , UT , USA
| | - Sun Jin Kim
- b Department of Pharmaceutics and Pharmaceutical Chemistry , University of Utah , Salt Lake City , UT , USA
| | - John Maxwell
- a Department of Obstetrics and Gynecology, Division of Gynecologic Oncology , University of Utah Health Sciences , Salt Lake City , UT , USA
| | - C Matthew Peterson
- c Department of Obstetrics and Gynecology, Division of Reproductive Endocrinology , University of Utah Health Science Center , Salt Lake City , UT , USA
| | - Shawn C Owen
- b Department of Pharmaceutics and Pharmaceutical Chemistry , University of Utah , Salt Lake City , UT , USA.,d Department of Bioengineering , University of Utah , Salt Lake City , UT , USA
| | - Margit M Janát-Amsbury
- a Department of Obstetrics and Gynecology, Division of Gynecologic Oncology , University of Utah Health Sciences , Salt Lake City , UT , USA.,b Department of Pharmaceutics and Pharmaceutical Chemistry , University of Utah , Salt Lake City , UT , USA.,c Department of Obstetrics and Gynecology, Division of Reproductive Endocrinology , University of Utah Health Science Center , Salt Lake City , UT , USA.,d Department of Bioengineering , University of Utah , Salt Lake City , UT , USA
| |
Collapse
|
24
|
Lin YK, Sharma R, Ma H, Chen WS, Yao CL. In situ polymerizable hydrogel incorporated with specific pathogen-free porcine platelet-rich plasma for the reconstruction of the corneal endothelium. J Taiwan Inst Chem Eng 2017. [DOI: 10.1016/j.jtice.2017.06.006] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
|
25
|
Risselada M, Marcellin-Little DJ, Messenger KM, Griffith E, Davidson GS, Papich MG. Assessment of in vitro release of carboplatin from six carrier media. Am J Vet Res 2016; 77:1381-1386. [DOI: 10.2460/ajvr.77.12.1381] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
26
|
Kondiah PJ, Choonara YE, Kondiah PPD, Marimuthu T, Kumar P, du Toit LC, Pillay V. A Review of Injectable Polymeric Hydrogel Systems for Application in Bone Tissue Engineering. Molecules 2016; 21:E1580. [PMID: 27879635 PMCID: PMC6272998 DOI: 10.3390/molecules21111580] [Citation(s) in RCA: 121] [Impact Index Per Article: 15.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2016] [Revised: 10/24/2016] [Accepted: 11/16/2016] [Indexed: 11/16/2022] Open
Abstract
Biodegradable, stimuli-responsive polymers are essential platforms in the field of drug delivery and injectable biomaterials for application of bone tissue engineering. Various thermo-responsive hydrogels display water-based homogenous properties to encapsulate, manipulate and transfer its contents to the surrounding tissue, in the least invasive manner. The success of bioengineered injectable tissue modified delivery systems depends significantly on their chemical, physical and biological properties. Irrespective of shape and defect geometry, injectable therapy has an unparalleled advantage in which intricate therapy sites can be effortlessly targeted with minimally invasive procedures. Using material testing, it was found that properties of stimuli-responsive hydrogel systems enhance cellular responses and cell distribution at any site prior to the transitional phase leading to gelation. The substantially hydrated nature allows significant simulation of the extracellular matrix (ECM), due to its similar structural properties. Significant current research strategies have been identified and reported to date by various institutions, with particular attention to thermo-responsive hydrogel delivery systems, and their pertinent focus for bone tissue engineering. Research on future perspective studies which have been proposed for evaluation, have also been reported in this review, directing considerable attention to the modification of delivering natural and synthetic polymers, to improve their biocompatibility and mechanical properties.
Collapse
Affiliation(s)
- Pariksha J Kondiah
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Yahya E Choonara
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Pierre P D Kondiah
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Thashree Marimuthu
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Pradeep Kumar
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Lisa C du Toit
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| | - Viness Pillay
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa.
| |
Collapse
|
27
|
Hamid Akash MS, Rehman K, Chen S. Natural and Synthetic Polymers as Drug Carriers for Delivery of Therapeutic Proteins. POLYM REV 2015. [DOI: 10.1080/15583724.2014.995806] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
28
|
Recent progress in biomedical applications of Pluronic (PF127): Pharmaceutical perspectives. J Control Release 2015; 209:120-38. [PMID: 25921088 DOI: 10.1016/j.jconrel.2015.04.032] [Citation(s) in RCA: 234] [Impact Index Per Article: 26.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2015] [Revised: 04/23/2015] [Accepted: 04/24/2015] [Indexed: 10/23/2022]
Abstract
Most of the administered anti-cancer drugs are hydrophobic in nature and are known to have poor water solubility, short residence time, rapid clearance from the body and systemic side effects. Polymeric-based targeted particulate carrier system has shown to directly deliver the encapsulated anti-cancer drug to the desired site of action and prevent the interaction of encapsulated drug with the normal cells. Pluronic F127 (PF127) has been widely investigated for its broad-range of therodiagnostic applications in biomedical and pharmaceutical sciences, but rapid dissolution in the physiological fluids, short residence time, rapid clearance, and weak mechanical strength are the main shortcomings that are associated with PF127 and have recently been overcome by making various modifications in the structure of PF127 notably through preparation of PF127-based mixed polymeric micelles, PF127-conjugated nanoparticles and PF127-based hydrophobically modified thermogels. In this article, we have briefly discussed the recent studies that have been conducted on various anti-cancer drugs using PF127 as nano-carrier modified with other copolymers and/or conjugated with magnetic nanoparticles. The key findings of these studies demonstrated that the modified form of PF127 can significantly increase the stability of incorporated hydrophobic drugs with enhanced in vitro cytotoxicity and cellular uptake of anti-cancer drugs. Moreover, the modified form of PF127 has also shown its therapeutic potentials as therodiagnostics in various types of tumors and cancers. Hence, it can be concluded that the modified form of PF127 exhibits significant therodiagnostic effects with increased tumor-specific delivery of anti-cancer drugs having minimal toxic effects as compared to PF127 alone and/or other copolymers.
Collapse
|
29
|
Medarević DP, Kachrimanis K, Mitrić M, Djuriš J, Djurić Z, Ibrić S. Dissolution rate enhancement and physicochemical characterization of carbamazepine-poloxamer solid dispersions. Pharm Dev Technol 2015; 21:268-76. [DOI: 10.3109/10837450.2014.996899] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Affiliation(s)
- Djordje P. Medarević
- Department of Pharmaceutical Technology and Cosmetology, Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia,
| | - Kyriakos Kachrimanis
- Department of Pharmaceutical Technology, Faculty of Pharmacy, Aristotle University of Thessaloniki, Thessaloniki, Greece, and
| | - Miodrag Mitrić
- Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia
| | - Jelena Djuriš
- Department of Pharmaceutical Technology and Cosmetology, Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia,
| | - Zorica Djurić
- Department of Pharmaceutical Technology and Cosmetology, Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia,
| | - Svetlana Ibrić
- Department of Pharmaceutical Technology and Cosmetology, Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia,
| |
Collapse
|
30
|
Akash MSH, Rehman K, Chen S. Polymeric-based particulate systems for delivery of therapeutic proteins. Pharm Dev Technol 2015; 21:367-78. [DOI: 10.3109/10837450.2014.999785] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Affiliation(s)
- Muhammad Sajid Hamid Akash
- Institute of Pharmacology, Toxicology, and Biochemical Pharmaceutics, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, China,
- Faculty of Pharmaceutical Sciences, Government College University Faisalabad, Faisalabad, Pakistan, and
| | - Kanwal Rehman
- Faculty of Pharmaceutical Sciences, Government College University Faisalabad, Faisalabad, Pakistan, and
- Department of Toxicology, School of Medicine and Public Health, Zhejiang University, Hangzhou, China
| | - Shuqing Chen
- Institute of Pharmacology, Toxicology, and Biochemical Pharmaceutics, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, China,
| |
Collapse
|
31
|
Akash MSH, Rehman K, Chen S. Pluronic F127-Based Thermosensitive Gels for Delivery of Therapeutic Proteins and Peptides. POLYM REV 2014. [DOI: 10.1080/15583724.2014.927885] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
32
|
Zeng N, Dumortier G, Maury M, Mignet N, Boudy V. Influence of additives on a thermosensitive hydrogel for buccal delivery of salbutamol: Relation between micellization, gelation, mechanic and release properties. Int J Pharm 2014; 467:70-83. [DOI: 10.1016/j.ijpharm.2014.03.055] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2014] [Revised: 03/28/2014] [Accepted: 03/28/2014] [Indexed: 10/25/2022]
|
33
|
Moreno E, Schwartz J, Larrañeta E, Nguewa PA, Sanmartín C, Agüeros M, Irache JM, Espuelas S. Thermosensitive hydrogels of poly(methyl vinyl ether-co-maleic anhydride) - Pluronic(®) F127 copolymers for controlled protein release. Int J Pharm 2013; 459:1-9. [PMID: 24315923 DOI: 10.1016/j.ijpharm.2013.11.030] [Citation(s) in RCA: 60] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2013] [Revised: 11/11/2013] [Accepted: 11/18/2013] [Indexed: 12/30/2022]
Abstract
Thermosensitive hydrogels are of a great interest due to their many biomedical and pharmaceutical applications. In this study, we synthesized a new series of random poly (methyl vinyl ether-co-maleic anhydride) (Gantrez(®) AN, GZ) and Pluronic(®) F127 (PF127) copolymers (GZ-PF127), that formed thermosensitive hydrogels whose gelation temperature and mechanical properties could be controlled by the molar ratio of GZ and PF127 polymers and the copolymer concentration in water. Gelation temperatures tended to decrease when the GZm/PF127 ratio increased. Thus, at a fixed GZm/PF127 value, sol-gel temperatures decreased at higher copolymer concentrations. Moreover, these hydrogels controlled the release of proteins such as bovine serum albumin (BSA) and recombinant recombinant kinetoplastid membrane protein of Leishmania (rKMP-11) more than the PF127 system. Toxicity studies carried out in J774.2 macrophages showed that cell viability was higher than 80%. Finally, histopathological analysis revealed that subcutaneous administration of low volumes of these hydrogels elicited a tolerable inflammatory response that could be useful to induce immune responses against the protein cargo in the development of vaccine adjuvants.
Collapse
Affiliation(s)
- Esther Moreno
- Tropical Health Institute, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Juana Schwartz
- Tropical Health Institute, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain; Pharmacy and Pharmaceutical Technology Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Eneko Larrañeta
- Pharmacy and Pharmaceutical Technology Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Paul A Nguewa
- Tropical Health Institute, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Carmen Sanmartín
- Tropical Health Institute, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain; Organic and Pharmaceutical Chemistry Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Maite Agüeros
- Pharmacy and Pharmaceutical Technology Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Juan M Irache
- Pharmacy and Pharmaceutical Technology Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain
| | - Socorro Espuelas
- Tropical Health Institute, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain; Pharmacy and Pharmaceutical Technology Department, University of Navarra, Irunlarrea 1, E-31008 Pamplona, Spain.
| |
Collapse
|
34
|
Chen YY, Wu HC, Sun JS, Dong GC, Wang TW. Injectable and thermoresponsive self-assembled nanocomposite hydrogel for long-term anticancer drug delivery. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:3721-3729. [PMID: 23441993 DOI: 10.1021/la400268p] [Citation(s) in RCA: 71] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The purpose of this study is to develop an injectable thermoresponsive hydrogel system that can undergo sol-gel phase transition by the stimulation of body temperature with improved mechanical stability and biocompatibility as a controlled drug delivery carrier for cancer therapy. Hexamethylene diisocyanate (HDI) was introduced into Pluronic F127 as a chain extender to improve the mechanical stability. HDI-Pluronic F127 copolymer was then incorporated with hyaluronic acid to develop a thermoresponsive nanocomposite hydrogel system. The physiochemical properties were characterized. The anticancer drug release profile and effect to inhibit tumor cells growth were analyzed in vitro and in vivo. The results showed that HDI-Pluronic F127/hyaluronic acid thermoresponsive hydrogel could undergo sol-gel transition as temperature increased to 37 °C. The nanocomposite polymer can spontaneously self-assemble into micellar structure with size of 100-200 nm. The release of doxorubicin (DOX) from HDI-PF127/HA composite hydrogel was a zero-order profile and maintained sustained release for over 28 days. The viability of tumor cells and size of tumor significantly decreased with incubation time, indicating the potential to have a therapeutic effect for cancer therapy. The injectable thermoresponsive nanocomposite hydrogel system was biocompatible and degradable and had the slow controlled release property for anticancer drugs with potential applications in the field of drug delivery.
Collapse
Affiliation(s)
- Ying-Yu Chen
- Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan
| | | | | | | | | |
Collapse
|
35
|
Son YJ, Yoo HS. Dexamethasone-incorporated nanofibrous meshes for antiproliferation of smooth muscle cells: thermally induced drug-loading strategy. J Biomed Mater Res A 2012; 100:2678-85. [PMID: 22619069 DOI: 10.1002/jbm.a.34197] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2011] [Revised: 03/12/2012] [Accepted: 03/28/2012] [Indexed: 11/06/2022]
Abstract
Pluronic-immobilized nanofibrous meshes were tailored for thermally induced incorporation of dexamethasone. A diblock copolymer composed of poly(e-caprolactone)-poly (ethyleneglycol) (NH(2)) (PCL-PEG (NH(2))) was electrospun to a nanofibrous mesh, and Pluronic was subsequently surface-immobilized on the mesh in aqueous phase. Surface-wettability analysis and (1)H NMR spectroscopy confirmed surface-decoration of nanofibrous meshes with Pluronic moieties depending on the blend ratios of PCL-PEG(NH(2)). Fluorescently-labeled micelles were incorporated in the nanofibrous meshes by temperature modulation and showed attenuated release profiles of the micelles were for 1 month. The suppression degree of drug-loaded micelle releases was proportional to the blend ratio of PCL-PEG(NH(2)). Dexamethasone was formulated into micellar nanoaggregates, and the dexamethasone micelles-loaded nanofibrous meshes were used for antiproliferation studies of smooth muscle cells. Flow cytometric analysis of the arrested cells at a G(0)-G(1) phase revealed that the dexamethasone micelles-loaded nanofibrous meshes effectively controlled proliferation of the smooth muscle cells when cells were cultivated with the nanofibrous meshes. The antiproliferation effects of the nanofibrous meshes were closely correlated to the release profiles of the micelles from the nanofibrous meshes with different blend ratios. Thus, dexamethasone-incorporated nanofibrous meshes can be potentially used for treatments of restenosis after percutaneous transluminal coronary angioplasty.
Collapse
Affiliation(s)
- Young Ju Son
- Department of Biomaterials Engineering, Kangwon National University, Chuncheon 200-701, Republic of Korea
| | | |
Collapse
|
36
|
Shin BK, Baek EJ, Choi SG, Davaa E, Nho YC, Lim YM, Park JS, Huh KM, Park JS. Preparation and irradiation of Pluronic F127-based thermoreversible and mucoadhesive hydrogel for local delivery of naproxen. Drug Dev Ind Pharm 2012; 39:1874-80. [DOI: 10.3109/03639045.2012.665925] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
37
|
In Vivo study of a blended hydrogel composed of pluronic F-127-alginate-hyaluronic acid for its cell injection application. Tissue Eng Regen Med 2012. [DOI: 10.1007/s13770-012-0001-0] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022] Open
|
38
|
Meznarich NAK, Juggernauth KA, Batzli KM, Love BJ. Structural Changes in PEO–PPO–PEO Gels Induced by Methylparaben and Dexamethasone Observed Using Time-Resolved SAXS. Macromolecules 2011. [DOI: 10.1021/ma2015358] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Norman A. K. Meznarich
- Department of Materials Science and Engineering, ‡Macromolecular Science and Engineering Research Center, §Department of Biomedical Engineering, and ⊥Dental & Biologic Materials (Dental School), University of Michigan, 2300 Hayward Street, Ann Arbor, Michigan 48109, United States
| | - K. Anne Juggernauth
- Department of Materials Science and Engineering, ‡Macromolecular Science and Engineering Research Center, §Department of Biomedical Engineering, and ⊥Dental & Biologic Materials (Dental School), University of Michigan, 2300 Hayward Street, Ann Arbor, Michigan 48109, United States
| | - Kiersten M. Batzli
- Department of Materials Science and Engineering, ‡Macromolecular Science and Engineering Research Center, §Department of Biomedical Engineering, and ⊥Dental & Biologic Materials (Dental School), University of Michigan, 2300 Hayward Street, Ann Arbor, Michigan 48109, United States
| | - Brian J. Love
- Department of Materials Science and Engineering, ‡Macromolecular Science and Engineering Research Center, §Department of Biomedical Engineering, and ⊥Dental & Biologic Materials (Dental School), University of Michigan, 2300 Hayward Street, Ann Arbor, Michigan 48109, United States
| |
Collapse
|
39
|
Transdermal delivery of selegiline from alginate–Pluronic composite thermogels. Int J Pharm 2011; 415:119-28. [DOI: 10.1016/j.ijpharm.2011.05.060] [Citation(s) in RCA: 68] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2011] [Revised: 05/09/2011] [Accepted: 05/23/2011] [Indexed: 01/22/2023]
|
40
|
|
41
|
Zhu W, Li Y, Liu L, Chen Y, Wang C, Xi F. Supramolecular Hydrogels from Cisplatin-Loaded Block Copolymer Nanoparticles and α-Cyclodextrins with a Stepwise Delivery Property. Biomacromolecules 2010; 11:3086-92. [DOI: 10.1021/bm100889j] [Citation(s) in RCA: 70] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Affiliation(s)
- Wen Zhu
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Yanli Li
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Lixin Liu
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Yongming Chen
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Chun Wang
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Fu Xi
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, The Chinese Academy of Sciences, Beijing 100190, China, College of Life Science, Graduate University of the Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049, China, and Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| |
Collapse
|
42
|
Chen JP, Leu YL, Fang CL, Chen CH, Fang JY. Thermosensitive hydrogels composed of hyaluronic acid and gelatin as carriers for the intravesical administration of cisplatin. J Pharm Sci 2010; 100:655-66. [PMID: 20799367 DOI: 10.1002/jps.22309] [Citation(s) in RCA: 48] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2010] [Revised: 05/02/2010] [Accepted: 06/30/2010] [Indexed: 11/12/2022]
Abstract
The aim of this work was to evaluate the use of thermosensitive hydrogels for intravesical cisplatin delivery into the bladder. Poly(N-isopropylacrylamide) (PNIPAM) was grafted onto hyaluronic acid (HA) to synthesize an HPN copolymer, which was further grafted with gelatin to form an HPNG copolymer. A 3% concentration of HPN and HPNG was sufficient to exert a thermosensitive response, whereas a concentration of 8% was needed for PNIPAM to form the hydrogel. The physicochemical and drug delivery properties were examined by scanning electron microscopy (SEM), the lower critical solution temperature (LCST), hydration ratio, and in vitro cisplatin release. The incorporation of HA and gelatin produced a different microstructure compared to the parent PNIPAM hydrogel. Gelatin conjugation increased the fibrous structure in the matrix. The LCSTs of PNIPAM, HPN, and HPNG were 32.3, 32.0, and 30.7°C, respectively. The copolymers showed an eightfold increase in the hydration capacity compared to PNIPAM, with no significant difference in values between HPN and HPNG. The release of cisplatin from an aqueous solution (control) was nearly complete after 8 h, compared to 85, 80, and 52% release from PNIPAM, HPN, and HPNG, respectively. In vivo evaluation of cisplatin levels in bladder tissues was performed following intravesical instillation in rats. When the dwell time was extended to 6 h, PNIPAM showed a sevenfold enhancement in the drug concentration in the bladder wall. HPNG also showed a twofold increase in the drug concentration. The administration of cisplatin by the HPN carrier did not change the drug accumulation compared to the control. Confocal laser scanning microscopic results confirmed the trend of drug absorption from various systems. A histological examination showed no adverse change in the urothelium with HPN or HPNG application. PNIPAM caused partial desquamation of umbrella cells. The thermosensitive hydrogels prepared in this study may be promising carriers for targeted drug delivery to the bladder.
Collapse
Affiliation(s)
- Jyh-Ping Chen
- Department of Chemical and Materials Engineering, Chang Gung University, Kweishan, Taoyuan, Taiwan
| | | | | | | | | |
Collapse
|