Development and application of artificial intelligence in cardiac imaging

Fully automated artificial intelligence-based coronary CT angiography image processing: efficiency, diagnostic capability, and risk stratification

OBJECTIVES

To prospectively investigate whether fully automated artificial intelligence (FAAI)-based coronary CT angiography (CCTA) image processing is non-inferior to semi-automated mode in efficiency, diagnostic ability, and risk stratification of coronary artery disease (CAD).

MATERIALS AND METHODS

Adults with indications for CCTA were prospectively and consecutively enrolled at two hospitals and randomly assigned to either FAAI-based or semi-automated image processing using equipment workstations. Outcome measures were workflow efficiency, diagnostic accuracy for obstructive CAD (≥ 50% stenosis), and cardiovascular events at 2-year follow-up. The endpoints included major adverse cardiovascular events, hospitalization for unstable angina, and recurrence of cardiac symptoms. The non-inferiority margin was 3 percentage difference in diagnostic accuracy and C-index.

RESULTS

In total, 1801 subjects (62.7 ± 11.1 years) were included, of whom 893 and 908 were assigned to the FAAI-based and semi-automated modes, respectively. Image processing times were 121.0 ± 18.6 and 433.5 ± 68.4 s, respectively (p <0.001). Scan-to-report release times were 6.4 ± 2.7 and 10.5 ± 3.8 h, respectively (p < 0.001). Of all subjects, 152 and 159 in the FAAI-based and semi-automated modes, respectively, subsequently underwent invasive coronary angiography. The diagnostic accuracies for obstructive CAD were 94.7% (89.9-97.7%) and 94.3% (89.5-97.4%), respectively (difference 0.4%). Of all subjects, 779 and 784 in the FAAI-based and semi-automated modes were followed for 589 ± 182 days, respectively, and the C-statistic for cardiovascular events were 0.75 (0.67 to 0.83) and 0.74 (0.66 to 0.82) (difference 1%).

CONCLUSIONS

FAAI-based CCTA image processing significantly improves workflow efficiency than semi-automated mode, and is non-inferior in diagnosing obstructive CAD and risk stratification for cardiovascular events.

CLINICAL RELEVANCE STATEMENT

Conventional coronary CT angiography image processing is semi-automated. This observation shows that fully automated artificial intelligence-based image processing greatly improves efficiency, and maintains high diagnostic accuracy and the effectiveness in stratifying patients for cardiovascular events.

KEY POINTS

• Coronary CT angiography (CCTA) relies heavily on high-quality and fast image processing. • Full-automation CCTA image processing is clinically non-inferior to the semi-automated mode. • Full automation can facilitate the application of CCTA in early detection of coronary artery disease.

Importance of Cardiovascular Magnetic Resonance Applied to Congenital Heart Diseases in Pediatric Age: A Narrative Review

Congenital heart diseases (CHDs) represent a heterogeneous group of congenital defects, with high prevalence worldwide. Non-invasive imaging is essential to guide medical and surgical planning, to follow the patient over time in the evolution of the disease, and to reveal potential complications of the chosen treatment. The application of cardiac magnetic resonance imaging (CMRI) in this population allows for obtaining detailed information on the defects without the necessity of ionizing radiations. This review emphasizes the central role of CMR in the overall assessment of CHDs, considering also the limitations and challenges of this imaging technique. CMR, with the application of two-dimensional (2D) and tri-dimensional (3D) steady-state free precession (SSFP), permits the obtaining of very detailed and accurate images about the cardiac anatomy, global function, and volumes' chambers, giving essential information in the intervention planning and optimal awareness of the postoperative anatomy. Nevertheless, CMR supplies tissue characterization, identifying the presence of fat, fibrosis, or oedema in the myocardial tissue. Using a contrast agent for angiography sequences or 2D/four-dimensional (4D) flows offers information about the vascular, valvular blood flow, and, in general, the cardiovascular system hemodynamics. Furthermore, 3D SSFP CMR acquisitions allow the identification of coronary artery abnormalities as an alternative to invasive angiography and cardiovascular computed tomography (CCT). However, CMR requires expertise in CHDs, and it can be contraindicated in patients with non-conditional devices. Furthermore, its relatively longer acquisition time and the necessity of breath-holding may limit its use, particularly in children under eight years old, sometimes requiring anesthesia. The purpose of this review is to elucidate the application of CMR during the pediatric age.

Unsupervised classification of multi-contrast magnetic resonance histology of peripheral arterial disease lesions using a convolutional variational autoencoder with a Gaussian mixture model in latent space: A technical feasibility study

PURPOSE

To investigate the feasibility of a deep learning algorithm combining variational autoencoder (VAE) and two-dimensional (2D) convolutional neural networks (CNN) for automatically quantifying hard tissue presence and morphology in multi-contrast magnetic resonance (MR) images of peripheral arterial disease (PAD) occlusive lesions.

METHODS

Multi-contrast MR images (T2-weighted and ultrashort echo time) were acquired from lesions harvested from six amputated legs with high isotropic spatial resolution (0.078 mm and 0.156 mm, respectively) at 9.4 T. A total of 4014 pseudo-color combined images were generated, with 75% used to train a VAE employing custom 2D CNN layers. A Gaussian mixture model (GMM) was employed to classify the latent space data into four tissue classes: I) concentric calcified (c), II) eccentric calcified (e), III) occluded with hard tissue (h) and IV) occluded with soft tissue (s). Test image probabilities, encoded by the trained VAE were used to evaluate model performance.

RESULTS

GMM component classification probabilities ranged from 0.92 to 0.97 for class (c), 1.00 for class (e), 0.82-0.95 for class (h) and 0.56-0.93 for the remaining class (s). Due to the complexity of soft-tissue lesions reflected in the heterogeneity of the pseudo-color images, more GMM components (n=17) were attributed to class (s), compared to the other three (c, e and h) (n=6).

CONCLUSION

Combination of 2D CNN VAE and GMM achieves high classification probabilities for hard tissue-containing lesions. Automatic recognition of these classes may aid therapeutic decision-making and identifying uncrossable lesions prior to endovascular intervention.

Challenges and advances in the management of inflammation in atherosclerosis

INTRODUCTION

Atherosclerosis, traditionally considered a lipid-related disease, is now understood as a chronic inflammatory condition with significant global health implications.

OBJECTIVES

This review aims to delve into the complex interactions among immune cells, cytokines, and the inflammatory cascade in atherosclerosis, shedding light on how these elements influence both the initiation and progression of the disease.

METHODS

This review draws on recent clinical research to elucidate the roles of key immune cells, macrophages, T cells, endothelial cells, and clonal hematopoiesis in atherosclerosis development. It focuses on how these cells and process contribute to disease initiation and progression, particularly through inflammation-driven processes that lead to plaque formation and stabilization. Macrophages ingest oxidized low-density lipoprotein (oxLDL), which partially converts to high-density lipoprotein (HDL) or accumulates as lipid droplets, forming foam cells crucial for plaque stability. Additionally, macrophages exhibit diverse phenotypes within plaques, with pro-inflammatory types predominating and others specializing in debris clearance at rupture sites. The involvement of CD4+ T and CD8+ T cells in these processes promotes inflammatory macrophage states, suppresses vascular smooth muscle cell proliferation, and enhances plaque instability.

RESULTS

The nuanced roles of macrophages, T cells, and the related immune cells within the atherosclerotic microenvironment are explored, revealing insights into the cellular and molecular pathways that fuel inflammation. This review also addresses recent advancements in imaging and biomarker technology that enhance our understanding of disease progression. Moreover, it points out the limitations of current treatment and highlights the potential of emerging anti-inflammatory strategies, including clinical trials for agents such as p38MAPK, tumor necrosis factor α (TNF-α), and IL-1β, their preliminary outcomes, and the promising effects of canakinumab, colchicine, and IL-6R antagonists.

CONCLUSION

This review explores cutting-edge anti-inflammatory interventions, their potential efficacy in preventing and alleviating atherosclerosis, and the role of nanotechnology in delivering drugs more effectively and safely.

Automated detection and classification of coronary atherosclerotic plaques on coronary CT angiography using deep learning algorithm

Background

Coronary artery disease (CAD) is the leading cause of mortality worldwide. Recent advances in deep learning technology promise better diagnosis of CAD and improve assessment of CAD plaque buildup. The purpose of this study is to assess the performance of a deep learning algorithm in detecting and classifying coronary atherosclerotic plaques in coronary computed tomographic angiography (CCTA) images.

Methods

Between January 2019 and September 2020, CCTA images of 669 consecutive patients with suspected CAD from Nanjing Drum Tower Hospital Clinical College of Nanjing University of Chinese Medicine were included in this study. There were 106 patients included in the retrospective plaque detection analysis, which was evaluated by a deep learning algorithm and four independent physicians with varying clinical experience. Additionally, 563 patients were included in the analysis for plaque classification using the deep learning algorithm, and their results were compared with those of expert radiologists. Plaques were categorized as absent, calcified, non-calcified, or mixed.

Results

The deep learning algorithm exhibited higher sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and accuracy {92% [95% confidence interval (CI): 89.5-94.1%], 87% (95% CI: 84.2-88.5%), 79% (95% CI: 76.1-82.4%), 95% (95% CI: 93.4-96.3%), and 89% (95% CI: 86.9-90.0%)} compared to physicians with ≤5 years of clinical experience in CAD diagnosis for the detection of coronary plaques. The algorithm's overall sensitivity, specificity, PPV, NPV, accuracy, and Cohen's kappa for plaque classification were 94% (95% CI: 92.3-94.7%), 90% (95% CI: 88.8-90.3%), 70% (95% CI: 68.3-72.1%), 98% (95% CI: 97.8-98.5%), 90% (95% CI: 89.8-91.1%) and 0.74 (95% CI: 0.70-0.78), indicating strong performance.

Conclusions

The deep learning algorithm has demonstrated reliable and accurate detection and classification of coronary atherosclerotic plaques in CCTA images. It holds the potential to enhance the diagnostic capabilities of junior radiologists and junior intervention cardiologists in the CAD diagnosis, as well as to streamline the triage of patients with acute coronary symptoms.

Prediction of heart failure and all-cause mortality using cardiac ultrasomics in patients with breast cancer

Breast cancer chemotherapy/immunotherapy can be associated with treatment-limiting cardiotoxicity. Radiomics techniques applied to ultrasound, known as ultrasomics, can be used in cardio-oncology to leverage echocardiography for added prognostic value. To utilize ultrasomics features collected prior to antineoplastic therapy to enhance prediction of mortality and heart failure (HF) in patients with breast cancer. Patients were retrospectively recruited in a study at the West Virginia University Cancer Institute. The final inclusion criteria were met by a total of 134 patients identified for the study. Patients were imaged using echocardiography in the parasternal long axis prior to receiving chemotherapy. All-cause mortality and HF, developed during treatment, were the primary outcomes. 269 features were assessed, grouped into four major classes: demographics (n = 21), heart function (n = 7), antineoplastic medication (n = 17), and ultrasomics (n = 224). Data was split into an internal training (60%, n = 81) and testing (40%, n = 53) set. Ultrasomics features augmented classification of mortality (area under the curve (AUC) 0.89 vs. 0.65, P = 0.003), when compared to demographic variables. When developing a risk prediction score for each feature category, ultrasomics features were significantly associated with both mortality (P = 0.031, log-rank test) and HF (P = 0.002, log-rank test). Further, only ultrasomics features provided significant improvement over demographic variables when predicting mortality (C-Index: 0.78 vs. 0.65, P = 0.044) and HF (C-Index: 0.77 vs. 0.60, P = 0.017), respectively. With further investigation, a clinical decision support tool could be developed utilizing routinely obtained patient data alongside ultrasomics variables to augment treatment regimens.

The Role of Artificial Intelligence in Healthcare: Enhancing Coronary Computed Tomography Angiography for Coronary Artery Disease Management

This review aims to explore the potential of artificial intelligence (AI) in coronary CT angiography (CCTA), a key tool for diagnosing coronary artery disease (CAD). Because CAD is still a major cause of death worldwide, effective and accurate diagnostic methods are required to identify and manage the condition. CCTA certainly is a noninvasive alternative for diagnosing CAD, but it requires a large amount of data as input. We intend to discuss the idea of incorporating AI into CCTA, which enhances its diagnostic accuracy and operational efficiency. Using such AI technologies as machine learning (ML) and deep learning (DL) tools, CCTA images are automated to perfection and the analysis is significantly refined. It enables the characterization of a plaque, assesses the severity of the stenosis, and makes more accurate risk stratifications than traditional methods, with pinpoint accuracy. Automating routine tasks through AI-driven CCTA will reduce the radiologists' workload considerably, which is a standard benefit of such technologies. More importantly, it would enable radiologists to allocate more time and expertise to complex cases, thereby improving overall patient care. However, the field of AI in CCTA is not without its challenges, which include data protection, algorithm transparency, as well as criteria for standardization encoding. Despite such obstacles, it appears that the integration of AI technology into CCTA in the future holds great promise for keeping CAD itself in check, thereby aiding the fight against this disease and begetting better clinical outcomes and more optimized modes of healthcare. Future research on AI algorithms for CCTA, making ethical use of AI, and thereby overcoming the technical and clinical barriers to widespread adoption of this new tool, will hopefully pave the way for profound AI-driven transformations in healthcare.

Diagnostic and prognostic performance of artificial intelligence-based fully-automated on-site CT-FFR in patients with CAD

Currently, clinically available coronary CT angiography (CCTA) derived fractional flow reserve (CT-FFR) is time-consuming and complex. We propose a novel artificial intelligence-based fully-automated, on-site CT-FFR technology, which combines the automated coronary plaque segmentation and luminal extraction model with reduced order 3 dimentional (3D) computational fluid dynamics. A total of 463 consecutive patients with 600 vessels from the updated China CT-FFR study in Cohort 1 undergoing both CCTA and invasive fractional flow reserve (FFR) within 90 d were collected for diagnostic performance evaluation. For Cohort 2, a total of 901 chronic coronary syndromes patients with index CT-FFR and clinical outcomes at 3-year follow-up were retrospectively analyzed. In Cohort 3, the association between index CT-FFR from triple-rule-out CTA and major adverse cardiac events in patients with acute chest pain from the emergency department was further evaluated. The diagnostic accuracy of this CT-FFR in Cohort 1 was 0.82 with an area under the curve of 0.82 on a per-patient level. Compared with the manually dependent CT-FFR techniques, the operation time of this technique was substantially shortened by 3 times and the number of clicks from about 60 to 1. This CT-FFR technique has a highly successful (> 99%) calculation rate and also provides superior prediction value for major adverse cardiac events than CCTA alone both in patients with chronic coronary syndromes and acute chest pain. Thus, the novel artificial intelligence-based fully automated, on-site CT-FFR technique can function as an objective and convenient tool for coronary stenosis functional evaluation in the real-world clinical setting.

Cardiovascular computed tomography in cardiovascular disease: An overview of its applications from diagnosis to prediction

Cardiovascular computed tomography angiography (CTA) is a widely used imaging modality in the diagnosis of cardiovascular disease. Advancements in CT imaging technology have further advanced its applications from high diagnostic value to minimising radiation exposure to patients. In addition to the standard application of assessing vascular lumen changes, CTA-derived applications including 3D printed personalised models, 3D visualisations such as virtual endoscopy, virtual reality, augmented reality and mixed reality, as well as CT-derived hemodynamic flow analysis and fractional flow reserve (FFRCT) greatly enhance the diagnostic performance of CTA in cardiovascular disease. The widespread application of artificial intelligence in medicine also significantly contributes to the clinical value of CTA in cardiovascular disease. Clinical value of CTA has extended from the initial diagnosis to identification of vulnerable lesions, and prediction of disease extent, hence improving patient care and management. In this review article, as an active researcher in cardiovascular imaging for more than 20 years, I will provide an overview of cardiovascular CTA in cardiovascular disease. It is expected that this review will provide readers with an update of CTA applications, from the initial lumen assessment to recent developments utilising latest novel imaging and visualisation technologies. It will serve as a useful resource for researchers and clinicians to judiciously use the cardiovascular CT in clinical practice.

Optimizing the Clinical Direction of Artificial Intelligence With Health Policy: A Narrative Review of the Literature

Artificial intelligence (AI) has the ability to completely transform the healthcare industry by enhancing diagnosis, treatment, and resource allocation. To ensure patient safety and equitable access to healthcare, it also presents ethical and practical issues that need to be carefully addressed. Its integration into healthcare is a crucial topic. To realize its full potential, however, the ethical issues around data privacy, prejudice, and transparency, as well as the practical difficulties posed by workforce adaptability and statutory frameworks, must be addressed. While there is growing knowledge about the advantages of AI in healthcare, there is a significant lack of knowledge about the moral and practical issues that come with its application, particularly in the setting of emergency and critical care. The majority of current research tends to concentrate on the benefits of AI, but thorough studies that investigate the potential disadvantages and ethical issues are scarce. The purpose of our article is to identify and examine the ethical and practical difficulties that arise when implementing AI in emergency medicine and critical care, to provide solutions to these issues, and to give suggestions to healthcare professionals and policymakers. In order to responsibly and successfully integrate AI in these important healthcare domains, policymakers and healthcare professionals must collaborate to create strong regulatory frameworks, safeguard data privacy, remove prejudice, and give healthcare workers the necessary training.

Recent Advances in Cardiac Magnetic Resonance for Imaging of Acute Myocardial Infarction

Acute myocardial infarction (AMI) is one of the primary causes of death worldwide, with a high incidence and mortality rate. Assessment of the infarcted and surviving myocardium, along with microvascular obstruction, is crucial for risk stratification, treatment, and prognosis in patients with AMI. Nonionizing radiation, excellent soft tissue contrast resolution, a large field of view, and multiplane imaging make cardiac magnetic resonance (CMR) a "one-stop" method for assessing cardiac structure, function, perfusion, and metabolism. Hence, this imaging technology is considered the "gold standard" for evaluating myocardial function and viability in AMI. This review critically compares the advantages and disadvantages of CMR with other cardiac imaging technologies, and relates the imaging findings to the underlying pathophysiological processes in AMI. A more thorough understanding of CMR technology will clarify their advanced clinical diagnosis and prognostic assessment applications, and assess the future approaches and challenges of CMR in the setting of AMI.

Advancements in artificial intelligence-driven techniques for interventional cardiology

This paper aims to thoroughly discuss the impact of artificial intelligence (AI) on clinical practice in interventional cardiology (IC) with special recognition of its most recent advancements. Thus, recent years have been exceptionally abundant in advancements in computational tools, including the development of AI. The application of AI development is currently in its early stages, nevertheless new technologies have proven to be a promising concept, particularly considering IC showing great impact on patient safety, risk stratification and outcomes during the whole therapeutic process. The primary goal is to achieve the integration of multiple cardiac imaging modalities, establish online decision support systems and platforms based on augmented and/or virtual realities, and finally to create automatic medical systems, providing electronic health data on patients. In a simplified way, two main areas of AI utilization in IC may be distinguished, namely, virtual and physical. Consequently, numerous studies have provided data regarding AI utilization in terms of automated interpretation and analysis from various cardiac modalities, including electrocardiogram, echocardiography, angiography, cardiac magnetic resonance imaging, and computed tomography as well as data collected during robotic-assisted percutaneous coronary intervention procedures. Thus, this paper aims to thoroughly discuss the impact of AI on clinical practice in IC with special recognition of its most recent advancements.

Cardiovascular Computed Tomography in the Diagnosis of Cardiovascular Disease: Beyond Lumen Assessment

Cardiovascular CT is being widely used in the diagnosis of cardiovascular disease due to the rapid technological advancements in CT scanning techniques. These advancements include the development of multi-slice CT, from early generation to the latest models, which has the capability of acquiring images with high spatial and temporal resolution. The recent emergence of photon-counting CT has further enhanced CT performance in clinical applications, providing improved spatial and contrast resolution. CT-derived fractional flow reserve is superior to standard CT-based anatomical assessment for the detection of lesion-specific myocardial ischemia. CT-derived 3D-printed patient-specific models are also superior to standard CT, offering advantages in terms of educational value, surgical planning, and the simulation of cardiovascular disease treatment, as well as enhancing doctor-patient communication. Three-dimensional visualization tools including virtual reality, augmented reality, and mixed reality are further advancing the clinical value of cardiovascular CT in cardiovascular disease. With the widespread use of artificial intelligence, machine learning, and deep learning in cardiovascular disease, the diagnostic performance of cardiovascular CT has significantly improved, with promising results being presented in terms of both disease diagnosis and prediction. This review article provides an overview of the applications of cardiovascular CT, covering its performance from the perspective of its diagnostic value based on traditional lumen assessment to the identification of vulnerable lesions for the prediction of disease outcomes with the use of these advanced technologies. The limitations and future prospects of these technologies are also discussed.

Generative Adversarial Networks in Medicine: Important Considerations for this Emerging Innovation in Artificial Intelligence

The advent of artificial intelligence (AI) and machine learning (ML) has revolutionized the field of medicine. Although highly effective, the rapid expansion of this technology has created some anticipated and unanticipated bioethical considerations. With these powerful applications, there is a necessity for framework regulations to ensure equitable and safe deployment of technology. Generative Adversarial Networks (GANs) are emerging ML techniques that have immense applications in medical imaging due to their ability to produce synthetic medical images and aid in medical AI training. Producing accurate synthetic images with GANs can address current limitations in AI development for medical imaging and overcome current dataset type and size constraints. Offsetting these constraints can dramatically improve the development and implementation of AI medical imaging and restructure the practice of medicine. As observed with its other AI predecessors, considerations must be taken into place to help regulate its development for clinical use. In this paper, we discuss the legal, ethical, and technical challenges for future safe integration of this technology in the healthcare sector.

Automated diagnosis of cardiovascular diseases from cardiac magnetic resonance imaging using deep learning models: A review

In recent years, cardiovascular diseases (CVDs) have become one of the leading causes of mortality globally. At early stages, CVDs appear with minor symptoms and progressively get worse. The majority of people experience symptoms such as exhaustion, shortness of breath, ankle swelling, fluid retention, and other symptoms when starting CVD. Coronary artery disease (CAD), arrhythmia, cardiomyopathy, congenital heart defect (CHD), mitral regurgitation, and angina are the most common CVDs. Clinical methods such as blood tests, electrocardiography (ECG) signals, and medical imaging are the most effective methods used for the detection of CVDs. Among the diagnostic methods, cardiac magnetic resonance imaging (CMRI) is increasingly used to diagnose, monitor the disease, plan treatment and predict CVDs. Coupled with all the advantages of CMR data, CVDs diagnosis is challenging for physicians as each scan has many slices of data, and the contrast of it might be low. To address these issues, deep learning (DL) techniques have been employed in the diagnosis of CVDs using CMR data, and much research is currently being conducted in this field. This review provides an overview of the studies performed in CVDs detection using CMR images and DL techniques. The introduction section examined CVDs types, diagnostic methods, and the most important medical imaging techniques. The following presents research to detect CVDs using CMR images and the most significant DL methods. Another section discussed the challenges in diagnosing CVDs from CMRI data. Next, the discussion section discusses the results of this review, and future work in CVDs diagnosis from CMR images and DL techniques are outlined. Finally, the most important findings of this study are presented in the conclusion section.

AI Cardiac MRI Scar Analysis Aids Prediction of Major Arrhythmic Events in the Multicenter DERIVATE Registry

Background Scar burden with late gadolinium enhancement (LGE) cardiac MRI (CMR) predicts arrhythmic events in patients with postinfarction in single-center studies. However, LGE analysis requires experienced human observers, is time consuming, and introduces variability. Purpose To test whether postinfarct scar with LGE CMR can be quantified fully automatically by machines and to compare the ability of LGE CMR scar analyzed by humans and machines to predict arrhythmic events. Materials and Methods This study is a retrospective analysis of the multicenter, multivendor CarDiac MagnEtic Resonance for Primary Prevention Implantable CardioVerter DebrillAtor ThErapy (DERIVATE) registry. Patients with chronic heart failure, echocardiographic left ventricular ejection fraction (LVEF) of less than 50%, and LGE CMR were recruited (from January 2015 through December 2020). In the current study, only patients with ischemic cardiomyopathy were included. Quantification of total, dense, and nondense scars was carried out by two experienced readers or a Ternaus network, trained and tested with LGE images of 515 and 246 patients, respectively. Univariable and multivariable Cox analyses were used to assess patient and cardiac characteristics associated with a major adverse cardiac event (MACE). Area under the receiver operating characteristic curve (AUC) was used to compare model performances. Results In 761 patients (mean age, 65 years ± 11, 671 men), 83 MACEs occurred. With use of the testing group, univariable Cox-analysis found New York Heart Association class, left ventricle volume and/or function parameters (by echocardiography or CMR), guideline criterion (LVEF of ≤35% and New York Heart Association class II or III), and LGE scar analyzed by humans or the machine-learning algorithm as predictors of MACE. Machine-based dense or total scar conferred incremental value over the guideline criterion for the association with MACE (AUC: 0.68 vs 0.63, P = .02 and AUC: 0.67 vs 0.63, P = .01, respectively). Modeling with competing risks yielded for dense and total scar (AUC: 0.67 vs 0.61, P = .01 and AUC: 0.66 vs 0.61, P = .005, respectively). Conclusion In this analysis of the multicenter CarDiac MagnEtic Resonance for Primary Prevention Implantable CardioVerter DebrillAtor ThErapy (DERIVATE) registry, fully automatic machine learning-based late gadolinium enhancement analysis reliably quantifies myocardial scar mass and improves the current prediction model that uses guideline-based risk criteria for implantable cardioverter defibrillator implantation. ClinicalTrials.gov registration no.: NCT03352648 Published under a CC BY 4.0 license. Supplemental material is available for this article.

Benign incidental cardiac findings in chest and cardiac CT imaging

With the continuous expansion of the disease scope of chest CT and cardiac CT, the number of these CT examinations has increased rapidly. In addition to their common indications, many incidental cardiac findings can be observed when carefully evaluating the coronary arteries, valves, pericardium, ventricles, and large vessels. These findings may have clinical significance or risk of complications, but they are sometimes overlooked or may not be described in the final reports. Although most of the incidental findings are benign, timely detection and treatment can improve the management of chronic diseases or reduce the possibility of severe complications. In this review, we summarized the imaging findings, incidence rate, and clinical relevance of some benign cardiac findings such as coronary artery calcification, aortic and mitral valve calcification, aortic calcification, cardiac thrombus, myocardial bridge, aortic dilation, cardiac myxoma, pericardial cyst, and coronary artery fistula. Reporting incidental cardiac findings will help reduce the risk of severe complications or disease deterioration and contribute to the recovery of patients.

Role and progress of artificial intelligence in radiodiagnosing vascular calcification: a narrative review

Background and Objective

Vascular calcification has important clinical significance due to its vital prognostic value for cardiovascular diseases, chronic kidney disease (CKD), diabetes, fracture, and other multisystem diseases. Radiology is the main diagnostic method of it, but facing great pressure such as the increasing workload and decreasing working accuracy rate. Therefore, radiology needs to find a way out to better realize the clinical value of vascular calcification. Artificial intelligence (AI) encompasses any algorithm imitating human intelligence. AI has shown great potential in image analysis, such as its high speed and accuracy, becoming the savior of the current situation. In order to promote more rational utilization, the role and progress of AI in this field were reviewed.

Methods

A search was conducted in PubMed and Web of Science. The key words included "artificial intelligence", "machine learning", "deep learning", and "vascular calcification". The qualitative analysis of literature was achieved through repeated deliberation after refining valuable content. The theme is the role and progress of AI in the diagnostic radiology of vascular calcification.

Key Content and Findings

Sixty-two articles were included. AI has been applied to the diagnostic radiology of 5 types of vascular calcification, including coronary artery calcification (CAC), thoracic aortic calcification (TAC), abdominal aortic calcification (AAC), carotid artery calcification, and breast artery calcification (BAC). Deep learning (DL), the latest technology in this field has been well applied and satisfactorily performed. Radiologists have been able to achieve efficient diagnosis of 5 types of vascular calcification through AI, with reliable accuracy.

Conclusions

Increasingly, advanced AI has achieved an accuracy comparable to that of human experts, with a faster speed. Moreover, the ability to reduce noise and artifacts enables more imaging equipment to obtain reliable quantification. AI has acquired the ability to cooperate with radiology departments in future work. However, the research in AAC and carotid artery calcification can be more in-depth, and more types of vascular calcification and more fields of radiology should be expanded to. The interpretation of results made by AI and the promotion of existing achievements to the development of other disciplines are also the focus in future.

[Machine learning technologies in CT-based diagnostics and classification of intracranial hemorrhages]

This review discusses pooled experience of creation, implementation and effectiveness of machine learning technologies in CT-based diagnosis of intracranial hemorrhages. The authors analyzed 21 original articles between 2015 and 2022 using the following keywords: «intracranial hemorrhage», «machine learning», «deep learning», «artificial intelligence». The review contains general data on basic concepts of machine learning and also considers in more detail such aspects as technical characteristics of data sets used for creation of AI algorithms for certain type of clinical task, their possible impact on effectiveness and clinical experience.

Native T1 Mapping-Based Radiomics for Noninvasive Prediction of the Therapeutic Effect of Pulmonary Arterial Hypertension

(1) Background: Novel markers for predicting the short-term therapeutic effect of pulmonary arterial hypertension (PAH) to assist in the prompt initiation of tailored treatment strategies are greatly needed and highly desirable. The aim of the study was to investigate the role of cardiac magnetic resonance (CMR) native T1 mapping radiomics in predicting the short-term therapeutic effect in PAH patients; (2) Methods: Fifty-five PAH patients who received targeted therapy were retrospectively included. Patients were subdivided into an effective group and an ineffective group by assessing the therapeutic effect after ≥3 months of treatment. All patients underwent CMR examinations prior to the beginning of the therapy. Radiomics features from native T1 mapping images were extracted. A radiomics model was constructed using the support vector machine (SVM) algorithm for predicting the therapeutic effect; (3) Results: The SVM radiomics model revealed favorable performance for predicting the therapeutic effect with areas under the receiver operating characteristic curve of 0.955 in the training cohort and 0.893 in the test cohort, respectively. With the optimal cutoff value, the radiomics model showed accuracies of 0.909 and 0.818 in the training and test cohorts, respectively; (4) Conclusions: The CMR native T1 mapping-based radiomics model holds promise for predicting the therapeutic effect in PAH patients.

Clinical application of deep learning and radiomics in hepatic disease imaging: a systematic scoping review

OBJECTIVE

Artificial intelligence (AI) has begun to play a pivotal role in hepatic imaging. This systematic scoping review summarizes the latest progress of AI in evaluating hepatic diseases based on computed tomography (CT) and magnetic resonance (MR) imaging.

METHODS

We searched PubMed and Web of Science for publications, using terms related to deep learning, radiomics, imaging methods (CT or MR), and the liver. Two reviewers independently selected articles and extracted data from each eligible article. The Quality Assessment of Diagnostic Accuracy Studies-AI (QUADAS-AI) tool was used to assess the risk of bias and concerns regarding applicability.

RESULTS

The screening identified 45 high-quality publications from 235 candidates, including 8 on diffuse liver diseases and 37 on focal liver lesions. Nine studies used deep learning and 36 studies used radiomics. All 45 studies were rated as low risk of bias in patient selection and workflow, but 36 (80%) were rated as high risk of bias in the index test because they lacked external validation. In terms of concerns regarding applicability, all 45 studies were rated as low concerns. These studies demonstrated that deep learning and radiomics can evaluate liver fibrosis, cirrhosis, portal hypertension, and a series of complications caused by cirrhosis, predict the prognosis of malignant hepatic tumors, and differentiate focal hepatic lesions.

CONCLUSIONS

The latest studies have shown that deep learning and radiomics based on hepatic CT and MR imaging have potential application value in the diagnosis, treatment evaluation, and prognosis prediction of common liver diseases. The AI methods may become useful tools to support clinical decision-making in the future.

ADVANCES IN KNOWLEDGE

Deep learning and radiomics have shown their potential in the diagnosis, treatment evaluation, and prognosis prediction of a series of common diffuse liver diseases and focal liver lesions.

Motion artifact removal in coronary CT angiography based on generative adversarial networks

OBJECTIVES

Coronary motion artifacts affect the diagnostic accuracy of coronary CT angiography (CCTA), especially in the mid right coronary artery (mRCA). The purpose is to correct CCTA motion artifacts of the mRCA using a GAN (generative adversarial network).

METHODS

We included 313 patients with CCTA scans, who had paired motion-affected and motion-free reference images at different R-R interval phases in the same cardiac cycle and included another 53 CCTA cases with invasive coronary angiography (ICA) comparison. Pix2pix, an image-to-image conversion GAN, was trained by the motion-affected and motion-free reference pairs to generate motion-free images from the motion-affected images. Peak signal-to-noise ratio (PSNR), structural similarity (SSIM), Dice similarity coefficient (DSC), and Hausdorff distance (HD) were calculated to evaluate the image quality of GAN-generated images.

RESULTS

At the image level, the median of PSNR, SSIM, DSC, and HD of GAN-generated images were 26.1 (interquartile: 24.4-27.5), 0.860 (0.830-0.882), 0.783 (0.714-0.825), and 4.47 (3.00-4.47), respectively, significantly better than the motion-affected images (p < 0.001). At the patient level, the image quality results were similar. GAN-generated images improved the motion artifact alleviation score (4 vs. 1, p < 0.001) and overall image quality score (4 vs. 1, p < 0.001) than those of the motion-affected images. In patients with ICA comparison, GAN-generated images achieved accuracy of 81%, 85%, and 70% in identifying no, < 50%, and ≥ 50% stenosis, respectively, higher than 66%, 72%, and 68% for the motion-affected images.

CONCLUSION

Generative adversarial network-generated CCTA images greatly improved the image quality and diagnostic accuracy compared to motion-affected images.

KEY POINTS

• A generative adversarial network greatly reduced motion artifacts in coronary CT angiography and improved image quality. • GAN-generated images improved diagnosis accuracy of identifying no, < 50%, and ≥ 50% stenosis.

Artificial Intelligence in Coronary CT Angiography: Current Status and Future Prospects

Coronary heart disease (CHD) is the leading cause of mortality in the world. Early detection and treatment of CHD are crucial. Currently, coronary CT angiography (CCTA) has been the prior choice for CHD screening and diagnosis, but it cannot meet the clinical needs in terms of examination quality, the accuracy of reporting, and the accuracy of prognosis analysis. In recent years, artificial intelligence (AI) has developed rapidly in the field of medicine; it played a key role in auxiliary diagnosis, disease mechanism analysis, and prognosis assessment, including a series of studies related to CHD. In this article, the application and research status of AI in CCTA were summarized and the prospects of this field were also described.

Functional Evaluation of Intermediate Coronary Lesions with Integrated Computed Tomography Angiography and Invasive Angiography in Patients with Stable Coronary Artery Disease

Background and objectives

The hemodynamic evaluation of coronary stenoses undergoes a transition from wire-based invasive measurements to image-based computational assessments. However, fractional flow reserve (FFR) values derived from coronary CT angiography (CCTA) and angiography-based quantitative flow ratio have certain limitations in accuracy and efficiency, preventing their widespread use in routine practice. Hence, we aimed to investigate the diagnostic performance of FFR derived from the integration of CCTA and invasive angiography (FFR_CT-angio) with artificial intelligence assistance in patients with stable coronary artery disease (CAD).

Methods

Forty stable CAD patients with 67 target vessels (50%-90% diameter stenosis) were included in this single-center retrospective study. All patients underwent CCTA followed by coronary angiography with FFR measurement within 30 days. Both CCTA and angiographic images were combined to generate a three-dimensional reconstruction of the coronary arteries using artificial intelligence. Subsequently, functional assessment was performed through a deep learning algorithm. FFR was used as the reference.

Results

FFR_CT-angio values were significantly correlated with FFR values (r = 0.81, P < 0.001, Spearman analysis). Per-vessel diagnostic accuracy of FFR_CT-angio was 92.54%. Sensitivity and specificity in identifying ischemic lesions were 100% and 88.10%, respectively. Positive predictive value and negative predictive value were 83.33% and 100%, respectively. Moreover, the diagnostic performance of FFR_CT-angio was satisfactory in different target vessels and different segment lesions.

Conclusions

FFR_CT-angio exhibits excellent diagnostic performance of identifying ischemic lesions in patients with stable CAD. Combining CCTA and angiographic imaging, FFR_CT-angio may represent an effective and practical alternative to invasive FFR in selected patients.

Recent Advances in Coronary Computed Tomography Angiogram: The Ultimate Tool for Coronary Artery Disease

PURPOSE OF REVIEW

The emerging technologies in multidetector computed tomography scanners gave the ability to image coronary arteries in a single heartbeat, at a higher quality, and low radiation dose. Furthermore, incorporating artificial intelligence and machine learning into image processing and interpretation have extended the use for coronary computed tomography angiogram (CCTA) and its applications. In this review, we will explore the recent evidence and advances supporting CCTA to become the ultimate tool for coronary artery disease.

RECENT FINDINGS

Results from the EVINCI, ISCHEMIA, SCOT-HEART, and PROMISE showed that CCTA is better in patients' risk stratification and in detecting subclinical atherosclerosis, resulting in earlier interventions and lesser events. Additionally, CCTA gave us a closer look on atherosclerotic disease by identifying different type of plaque and their clinical significance. Furthermore, FFR_CT is a notable example of incorporating artificial intelligence into CCTA. This technology helped us to accurately and non-invasively identify flow limiting lesions, guiding revascularization. As a result of the recent evidence, CCTA have made its way into the chest pain guidelines all over the world. Moreover, CCTA have the potential to revolutionize our understanding and standards in screening, preventing, and managing heart disease.

Artificial Intelligence Algorithm-Based Computerized Tomography Image Features Combined with Serum Tumor Markers for Diagnosis of Pancreatic Cancer

The objective of this study was to analyze the value of artificial intelligence algorithm-based computerized tomography (CT) image combined with serum tumor markers for diagnoses of pancreatic cancer. In the study, 68 hospitalized patients with pancreatic cancer were selected as the experimental group, and 68 hospitalized patients with chronic pancreatitis were selected as the control group, all underwent CT imaging. An image segmentation algorithm on account of two-dimensional (2D)-three-dimensional (3D) convolution neural network (CNN) was proposed. It also introduced full convolutional network (FCN) and UNet network algorithm. The diagnostic performance of CT, serum carbohydrate antigen-50 (CA-50), serum carbohydrate antigen-199 (CA-199), serum carbohydrate antigen-242 (CA-242), combined detection of tumor markers, and CT-combined tumor marker testing (CT-STUM) for pancreatic cancer were compared and analyzed. The results showed that the average Dice coefficient of 2D-3D training was 84.27%, which was higher than that of 2D and 3D CNNs. During the test, the maximum and average Dice coefficient of the 2D-3D CNN algorithm was 90.75% and 84.32%, respectively, which were higher than the other two algorithms, and the differences were statistically significant (P < 0.05). The penetration ratio of pancreatic duct in the experimental group was lower than that in the control group, the rest were higher than that in the control group, and the differences were statistically significant (P < 0.05). CA-50, CA-199, and CA-242 in the experimental group were 141.72 U/mL, 1548.24 U/mL, and 83.65 U/mL, respectively, which were higher than those in the control group, and the differences were statistically significant (P < 0.05). The sensitivity, specificity, positive predictive value, and authenticity of combined detection of serum tumor markers were higher than those of CA-50, CA-199, and CA-242, and the differences were statistically significant (P < 0.05). The results showed that the proposed algorithm 2D-3D CNN had good stability and image segmentation performance. CT-STUM had high sensitivity and specificity in diagnoses of pancreatic cancer.

Magnetic Resonance Texture Analysis in Myocardial Infarction

Texture analysis (TA) is a newly arisen field that can detect the invisible MRI signal changes among image pixels. Myocardial infarction (MI) is cardiomyocyte necrosis caused by myocardial ischemia and hypoxia, becoming the primary cause of death and disability worldwide. In recent years, various TA studies have been performed in patients with MI and show a good clinical application prospect. This review briefly presents the main pathogenesis and pathophysiology of MI, introduces the overview and workflow of TA, and summarizes multiple magnetic resonance TA (MRTA) clinical applications in MI. We also discuss the facing challenges currently for clinical utilization and propose the prospect.

Development and multicenter validation of chest X-ray radiography interpretations based on natural language processing

Background

Artificial intelligence can assist in interpreting chest X-ray radiography (CXR) data, but large datasets require efficient image annotation. The purpose of this study is to extract CXR labels from diagnostic reports based on natural language processing, train convolutional neural networks (CNNs), and evaluate the classification performance of CNN using CXR data from multiple centers

Methods

We collected the CXR images and corresponding radiology reports of 74,082 subjects as the training dataset. The linguistic entities and relationships from unstructured radiology reports were extracted by the bidirectional encoder representations from transformers (BERT) model, and a knowledge graph was constructed to represent the association between image labels of abnormal signs and the report text of CXR. Then, a 25-label classification system were built to train and test the CNN models with weakly supervised labeling.

Results

In three external test cohorts of 5,996 symptomatic patients, 2,130 screening examinees, and 1,804 community clinic patients, the mean AUC of identifying 25 abnormal signs by CNN reaches 0.866 ± 0.110, 0.891 ± 0.147, and 0.796 ± 0.157, respectively. In symptomatic patients, CNN shows no significant difference with local radiologists in identifying 21 signs (p > 0.05), but is poorer for 4 signs (p < 0.05). In screening examinees, CNN shows no significant difference for 17 signs (p > 0.05), but is poorer at classifying nodules (p = 0.013). In community clinic patients, CNN shows no significant difference for 12 signs (p > 0.05), but performs better for 6 signs (p < 0.001).

Conclusion

We construct and validate an effective CXR interpretation system based on natural language processing.

Chest X-rays are accompanied by a report from the radiologist, which contains valuable diagnostic information in text format. Extracting and interpreting information from these reports, such as keywords, is time-consuming, but artificial intelligence (AI) can help with this. Here, we use a type of AI known as natural language processing to extract information about abnormal signs seen on chest X-rays from the corresponding report. We develop and test natural language processing models using data from multiple hospitals and clinics, and show that our models achieve similar performance to interpretation from the radiologists themselves. Our findings suggest that AI might help radiologists to speed up interpretation of chest X-ray reports, which could be useful not only in patient triage and diagnosis but also cataloguing and searching of radiology datasets.

Zhang et al. develop a natural language processing approach, based on the BERT model, to extract linguistic information from chest X-ray radiography reports. The authors establish a 25-label classification system for abnormal findings described in the reports and validate their model using data from multiple sites.

Classification of Cardiomyopathies from MR Cine Images Using Convolutional Neural Network with Transfer Learning

The automatic classification of various types of cardiomyopathies is desirable but has never been performed using a convolutional neural network (CNN). The purpose of this study was to evaluate currently available CNN models to classify cine magnetic resonance (cine-MR) images of cardiomyopathies. Method: Diastolic and systolic frames of 1200 cine-MR sequences of three categories of subjects (395 normal, 411 hypertrophic cardiomyopathy, and 394 dilated cardiomyopathy) were selected, preprocessed, and labeled. Pretrained, fine-tuned deep learning models (VGG) were used for image classification (sixfold cross-validation and double split testing with hold-out data). The heat activation map algorithm (Grad-CAM) was applied to reveal salient pixel areas leading to the classification. Results: The diastolic–systolic dual-input concatenated VGG model cross-validation accuracy was 0.982 ± 0.009. Summed confusion matrices showed that, for the 1200 inputs, the VGG model led to 22 errors. The classification of a 227-input validation group, carried out by an experienced radiologist and cardiologist, led to a similar number of discrepancies. The image preparation process led to 5% accuracy improvement as compared to nonprepared images. Grad-CAM heat activation maps showed that most misclassifications occurred when extracardiac location caught the attention of the network. Conclusions: CNN networks are very well suited and are 98% accurate for the classification of cardiomyopathies, regardless of the imaging plane, when both diastolic and systolic frames are incorporated. Misclassification is in the same range as inter-observer discrepancies in experienced human readers.

Artificial Intelligence and Texture Analysis in Cardiac Imaging

PURPOSE OF REVIEW

The aim of this structured review is to summarize the current research applications and opportunities arising from artificial intelligence (AI) and texture analysis with regard to cardiac imaging.

RECENT FINDINGS

Current research findings suggest tremendous potential for AI in cardiac imaging, especially with regard to objective image analyses, overcoming the limitations of an observer-dependent subjective image interpretation. Researchers have used this technique across multiple imaging modalities, for instance to detect myocardial scars in cardiac MR imaging, to predict contrast enhancement in non-contrast studies, and to improve image acquisition and reconstruction. AI in medical imaging has the potential to provide novel, much-needed applications for improving patient care pertaining to the cardiovascular system. While several shortcomings are still present in the current methodology, AI may serve as a resourceful assistant to radiologists and clinicians alike.