Adsorption of Vanillin Using Macroporous Resin H103

Natural deep eutectic solvents-based green extraction of vanillin: optimization, purification, and bioactivity assessment

The sustainable extraction of natural compounds has recently attracted significant attention. The extraction of high-quality natural vanillin in active form is crucial for its efficient use in various industries, but conventional solvents are not suitable for this purpose. The flammability, volatility, and toxicity of organic solvents can harm extraction personnel, and their waste liquid can cause environmental pollution. Natural deep eutectic solvents (NADES) are cost-effective, environmentally friendly, biodegradable, and non-toxic organic alternative to conventional solvents. In this study, 20 different NADES were tested for the sustainable extraction of natural vanillin. Among these, a DES system composed of choline chloride: 1,4-butanediol: lactic acid exhibited the highest extraction rate (15.9 mg/g). Employing response surface methodology (RSM), optimal extraction conditions were determined, yielding a vanillin content 18.5 mg/g with water content of 33.9%, extraction temperature of 64.6°C, extraction time of 32.3 min, and a solid-liquid ratio of 44.9 mg/mL. Subsequently, the optimized NADES system was then assessed for reusability in extracting vanillin from vanilla pods and kraft lignin over three cycles, retaining 43% of its extraction efficiency and demonstrating potential for waste reduction. Purification of vanillin was achieved through chromatography using a non-polar resin SP700, with ethanol as a desorption eluent and a feed solution pH of 4.0, resulting in the highest vanillin purity. HPLC and GC-MS analyses confirmed purity, while antioxidant activity assays (DPPH and ABTS) showcased significant antioxidant activity of the purified vanillin. Moreover, vanillin exhibited notable antimicrobial activity against a panel of food-borne bacteria. This study introduces an environmentally friendly approach to vanillin extraction highlights using NADES, emphasizing the potential for producing high-quality bioactive vanillin with reduced environmental impact. The applicability of NADES systems extends beyond vanillin, offering a versatile method for extracting diverse natural compounds.

Development of In Situ Product Recovery (ISPR) System Using Amberlite IRA67 for Enhanced Biosynthesis of Hyaluronic Acid by Streptococcus zooepidemicus

High broth viscosity due to the accumulation of hyaluronic acid (HA) causes a limited yield of HA. It is a major problem of HA production using Streptococcus zooepidemicus. Extractive fermentation via in situ product recovery (ISPR) was utilized to enhance the HA production. Resins from Amberlite: IRA400 Cl; IRA900 Cl; IRA410 Cl; IRA402 Cl; and IRA67 were tested for the HA adsorption. IRA67 showed high adsorption capacity on HA. The study of the adsorption via a 2 L stirred tank bioreactor of S. zooepidemicus fermentation was investigated to elucidate the adsorption of HA onto IRA67 in dispersed and integrated internal column systems. The application of a dispersed IRA67 improved the HA production compared to the fermentation without resin addition by 1.37-fold. The HA production was further improved by 1.36-fold with an internal column (3.928 g/L) over that obtained with dispersed IRA67. The cultivation with an internal column shows the highest reduction of viscosity value after the addition of IRA67 resin: from 58.8 to 23.7 (mPa·s), suggesting the most effective ISPR of HA. The improved biosynthesis of HA indicated that an extractive fermentation by ISPR adsorption is effective and may streamline the HA purification.

Purification of Polyphenols from Distiller's Grains by Macroporous Resin and Analysis of the Polyphenolic Components

We aimed to purify polyphenols from distiller’s grain extract using macroporous resins and to identify its polyphenolic components. The influence of operational parameters on purification efficiency was investigated. The polyphenolic composition was analyzed by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) and then quantified by UPLC-MS using authenticated standards. The results showed that the optimal purifying conditions were D101 resin with a dosage of 3 g, four hours adsorption, three hours desorption time, and 60% ethanol as the eluent, producing the highest purification rate of 51%. The purified distiller’s grain extract exhibited stronger antioxidant activity than the unpurified extracts, which was assessed using DPPH and ABTS methods (IC₅₀ DPPH = 34.03 and 16.21 μg/mL, respectively; IC₅₀ ABTS = 20.31 and 5.73 μg/mL, respectively). UPLC-MS results indicated that (−)-epicatechin is the major compound found in distiller’s grain extract which was quantified as 562.7 μg/g extract, followed by ferulic acid (518.2 μg/g), p-hydroxybenzoic acid (417.7 μg/g), caffeic acid (217.1 μg/g), syringic acid (158.0 μg/g) and quercetin (147.8 μg/g). Two compounds, vanillic acid (66.5 μg/g) and gallic acid (41.4 μg/g), were found in lower concentrations. The findings of this study suggest that purification of polyphenolic compounds from distiller’s grain by macroporous resins is feasible, providing a new and effective method for the secondary use of distiller’s grain resources.