Designing an efficient organic-inorganic hybrid nanocomposite for simultaneous oxidative/adsorptive desulfurization of model and real fuel oils

In this study, an efficient organic-inorganic hybrid nanocomposite was designed for deep oxidative/adsorptive removal of dibenzothiophene (DBT) from model and real fuel oils employing surface molecularly imprinted polymer (SMIP) and mesoporous silica nanoparticles (MSNs). On the surface of silanol-functionalized MCM-48-HPW prepared at different 12-tungstophosphoric acid (HPW wt%) as the oxidation catalyst, an imprinted polymethacrylic acid polymer (PMAA) as a selective adsorbent of DBT was formed using different amounts of DBT template. Then, various oxidant/sulfur molar ratios were applied during the desulfurization reactions according to the central composite design (CCD). The successful synthesis of the optimum SMIP-PMAA@MCM-48-HPW nanocomposite was confirmed by FTIR, XRD, N2-adsorption, SEM, TEM, TGA, and NMR techniques. The desulfurization percentage of the model oil reached 98.54% under the optimum conditions, and the catalyst percentage was found to be the most significant parameter for desulfurization efficiency. Comparison experiments showed that the combined role of oxidation and adsorption had an extensive impact on desulfurization efficiency. Under the optimized conditions, 96% DBT from gasoline was removed by the optimum nanocomposite. The optimum nanocomposite showed good stability and could be reused five times without a remarkable decrease in the desulfurization ability.

Preparation of magnetic molecularly imprinted polymers for the rapid detection of diethylstilbestrol in milk samples

BACKGROUND

Diethylstilbestrol (DES) residues are harmful to human health because of their potential carcinogenic properties. Therefore, it is important to develop a fast and efficient pretreatment method to prevent their harmful effects on human health and the environment.

RESULTS

In this paper, two types of magnetic molecularly imprinted polymers (MMIPs) of DES were prepared by bulk polymerization and the sol-gel method, respectively. The synthetic materials were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. Adsorption capacities of the bulk and sol-gel MMIPs were investigated. A rapid detection method was developed using the two types of MMIPs as sorbents, coupled to high-performance liquid chromatography, for the determination of DES residues in milk samples. Under optimized conditions, the limit of detection (S/N = 3) of both methods for DES was 2.0 μg L^-1 ; and the linear response range to DES was 0.1-500 mg L^-1 . The milk samples were analyzed according to this method with good recoveries of 88.3-97.6 and 90.5-103.5% for the two types of MMIPs, respectively.

CONCLUSIONS

The method described had high sensitivity and high selectivity, and could prove to be a new method for the rapid determination of DES residues in milk samples. © 2019 Society of Chemical Industry.