Khat Chewing Induces a Floral Shift in Dental Material-Associated Microbiota: A Preliminary Study

Impact of Smokeless Tobacco on the Color Stability of Zirconia, Zirconia-Reinforced Lithium Silicate and Feldspathic CAD/CAM Restorative Materials: An In-Vitro Study

WHO estimates that the global number of tobacco users exceeds 1.3 billion people. Few studies have examined the effect of locally made smokeless tobacco (ST) products on the color changes of material used in dental prosthetics. Bearing the recent advances in CAD/CAM ceramic restorations material in mind, this study aimed to assess ST influence on mean color change (∆E*) values among selected CAD/CAM ceramic types: multilayer zirconia (Ceramill Zolid PS), zirconia-reinforced lithium silicate ceramic (Vita Suprinity), and feldspathic (Vita TriLuxe) restorative materials. The color changes of the ceramics were compared to VITA classical and VITA 3D-MASTER shade guides. Sixty CAD/CAM ceramic specimens (20 samples each) were fabricated from Ceramill Zolid PS, Vita TriLuxe Forte, and VITA Suprinity. Specimens were prepared and divided into two groups according to the ST type and immersed for two weeks. Basic VITA classical and VITA 3D-MASTER colors were recorded at a baseline of one week and two weeks. The highest ∆E* values were recorded in the black ST for Vita Suprinity (4.77) in the first week, followed by Vita TriLuxe (4.07) in the second week. For white ST, Vita TriLuxe (4.87), and Vita Suprinity (4.42) showed extensive color change after two weeks and one week, respectively. The color change was least in zirconia for black and white ST after one week. CAD/CAM ceramic materials showed no significant difference after 1 and 2 weeks for the tested ST types. The effects of ST on CAD/CAM ceramic material (∆E* values) were high but did not reach clinically unacceptable values. Zirconia showed the least amount of color change among all the tested materials.

Assessment of Color Stainability of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Ceramic Materials After Hot and Cold Coffee Immersion at Different Time Intervals

BACKGROUND This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. MATERIAL AND METHODS Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee. Color of specimens was measured during immersion in staining materials (BEFORE) as baseline with (Vita classic) and (L, a, b), for average color changes (ΔE₀₀), then remeasured after 2, 4, and 12 weeks, and described as 1st, 2nd, and 3rd measurements for VITAPAN Classic shade and T1, T2, and T3 for ΔE00 values using the CIE L*a*b* equation. We performed ANOVA and then post hoc testing. RESULTS We found significant differences in ΔE₀₀ values during immersing in hot Arabic Qahwa and cold coffee for tested materials in glazed or polished specimens. Polished specimens of Vita-S and Vita-E had the highest color changing and staining compared to glazed surfaces. Vitablocs-MII had the best color stability through immersion periods. Moreover, there were changes in relation to VITAPAN Classic shade guide for both Vita-S and Vita-E specimens during different immersion periods. CONCLUSIONS Coffee caused staining and contamination of ceramic material. Values of ΔE₀₀ for tested ceramic materials were significantly different but were within the clinically acceptable range. Polished specimens showed higher staining; therefore, we highly recommend re-glazing of ceramic restorations to maintain color stability.

Microbiome Studies from Saudi Arabia over the Last 10 Years: Achievements, Gaps, and Future Directions

In the past ten years, microbiome studies have shown tremendous potentiality for implementation of understanding microbiome structures and functions of various biomes and application of this knowledge for human betterment. Saudi Arabia is full of geographical, ecological, ethnical, and industrial diversities and scientific capacities. Therefore, there is a great potential in Saudi Arabia to conduct and implement microbiome-based research and applications. However, there is no review available on where Saudi Arabia stands with respect to global microbiome research trends. This review highlights the metagenome-assisted microbiome research from Saudi Arabia compared to the global focuses on microbiome research. Further, it also highlights the gaps and areas that should be focused on by Saudi microbiome researchers and the possible initiatives to be taken by Saudi government and universities. This literature review shows that the global trends of microbiome research cover a broad spectrum of human and animal health conditions and diseases, environmental and antimicrobial resistance surveillance, surveillance of food and food processing, production of novel industrial enzymes and bioactive pharmaceutical products, and space applications. However, Saudi microbiome studies are mostly confined to very few aspects of health (human and animal) and environment/ecology in last ten years, without much application. Therefore, Saudi Arabia should focus more on applied microbiome research through government, academic, and industry initiatives and global cooperation to match the global trends.

Optimizing the quality of clinical studies on oral microbiome: A practical guide for planning, performing, and reporting

With this review, we aim to increase the quality standards for clinical studies with microbiome as an output parameter. We critically address the existing body of evidence for good quality practices in oral microbiome studies based on 16S rRNA gene amplicon sequencing. First, we discuss the usefulness of microbiome profile analyses. Is a microbiome study actually the best approach for answering the research question? This is followed by addressing the criteria for the most appropriate study design, sample size, and the necessary data (study metadata) that should be collected. Next, we evaluate the available evidence for best practices in sample collection, transport, storage, and DNA isolation. Finally, an overview of possible sequencing options (eg, 16S rRNA gene hypervariable regions, sequencing platforms), processing and data interpretation approaches, as well as requirements for meaningful data storage, sharing, and reporting are provided.

Effects of Khat on Surface Roughness and Color of Feldspathic and Zirconia Porcelain Materials under Simulated Oral Cavity Conditions

Background and Objectives: Khat chewing is considered as a daily habit that is practiced by more than five million people globally. The effect of khat chewing on the surface roughness and the color stability of natural teeth and the material used in the fabrication of dental prosthesis remains unknown. This study was conducted to explore and compare the effect of khat homogenate (KH) on the surface roughness (Ra) and the average color changes (ΔE*) amongst natural teeth and selected shades from different porcelain types, namely, feldspathic metal ceramic (MC) VM13, computer-aided design/computer assisted manufacture (CAD/CAM) feldspathic (Vitablocs Mark II), and multilayer zirconia (Ceramill Zolid PS) porcelains. Materials and Methods: Seventy samples were prepared from natural teeth, feldspathic MC, CAD/CAM Vitablocs Mark II, and zirconia porcelain. The Ra values were measured using a profilometer and expressed in micrometers, whereas the ΔE* values were measured using VITA Easyshade® V spectrophotometer for all samples before and after frequent immersion and thermocycling in KH for 30 days. The surface topography was used to assess the materials surfaces (glazed or polished) after KH immersion by using a white light interferometry machine. Results: Results revealed that the Ra and the ΔE* values of the different types of tested porcelain were influenced by KH. The order of surface roughness values was glazed or polished MC > polished Zircon > polished Vitablocs Mark II > natural teeth. The lowest ΔE* values were recorded for glazed Vitablocs Mark II and MC, and the values could be arranged as polished zircon > natural teeth > glazed zircon > polished MC > polished Vitablocs Mark II. P values were significantly varied (< 0.001) among all the tested groups, except the zircon group (>0.05) for both Ra and ΔE*. Conclusion: KH significantly affected both surface parameter and color of glazed or polished porcelain materials and natural teeth.