Is a modular dual mobility acetabulum a viable option for the young, active total hip arthroplasty patient?

Offset Considerations in Total Hip Arthroplasty

To perform total hip arthroplasty (THA) successfully, a surgeon must be able to place the implants in a position that will restore and duplicate the patient's baseline anatomy and soft-tissue tension. One of the critical factors is the restoration of femoral offset. It is the goal of this review to precisely define measurement of offset in THA, describe its role in hip joint biomechanics, outline alterations that can be performed intraoperatively, and explain how it can create potential pathologic states. If there is a lack of offset restoration, it can result in a host of complications, including bony impingement with pain, edge loading or prosthetic joint instability, and alterations in the muscle length-tension relationship leading to reduced motor performance. Excessive femoral offset can increase hip abductor muscle and iliotibial band tension resulting in greater trochanteric pain regardless of the surgical approach. The purpose of this review was to analyze intraoperative surgical factors, choice of prosthetic implant type and position that are required to maximize stability, and dynamic motor performance after THA.

Fretting and Tribocorrosion of Modular Dual Mobility Liners: Role of Design, Microstructure, and Malseating

BACKGROUND

Modular dual mobility (DM) bearings have a junction between a cobalt chrome alloy (CoCrMo) liner and titanium shell, and the risk of tribocorrosion at this interface remains a concern. The purpose of this study was to determine whether liner malseating and liner designs are associated with taper tribocorrosion.

METHODS

We evaluated 28 retrieved modular DM implants with a mean in situ duration of 14.6 months (range, 1 to 83). There were 2 manufacturers included (12 and 16 liners, respectively). Liners were considered malseated if a distinct divergence between the liner and shell was present on postoperative radiographs. Tribocorrosion was analyzed qualitatively with the modified Goldberg Score and quantitatively with an optical coordinate-measuring machine. An acetabular shell per manufacturer was sectioned for metallographic analysis.

RESULTS

There were 6 implants (22%) that had severe grade 4 corrosion, 6 (22%) had moderate grade 3, 11 (41%) had mild grade 2, and 5 (18.5%) had grade 1 or no visible corrosion. The average volumetric material loss at the taper was 0.086 ± 0.19 mm3. There were 7 liners (25%) that had radiographic evidence of malseating, and all were of a single design (P = .01). The 2 liner designs were fundamentally different from one another with respect to the cobalt chrome alloy type, taper surface finish, and shape deviations. Malseating was an independent risk factor for increased volumetric material loss (P = .017).

CONCLUSIONS

DM tribocorrosion with quantifiable material loss occurred more commonly in malseated liners. Specific design characteristics may make liners more prone to malseating, and the interplay between seating mechanics, liner characteristics, and patient factors likely contributes to the shell/liner tribocorrosion environment.

LEVEL OF EVIDENCE

Level III.

Contact states with femoral cortical bone and periprosthetic bone mineral density changes differ between traditional and newly introduced fully hydroxyapatite-coated stems

Aims

The aim of this study was to compare the pattern of initial fixation and changes in periprosthetic bone mineral density (BMD) between patients who underwent total hip arthroplasty (THA) using a traditional fully hydroxyapatite (HA)-coated stem (T-HA group) and those with a newly introduced fully HA-coated stem (N-HA group).

Methods

The study included 36 patients with T-HA stems and 30 with N-HA stems. Dual-energy X-ray absorptiometry was used to measure the change in periprosthetic BMD, one and two years postoperatively. The 3D contact between the stem and femoral cortical bone was evaluated using a density-mapping system, and clinical assessment, including patient-reported outcome measurements, was recorded.

Results

There were significantly larger contact areas in Gruen zones 3, 5, and 6 in the N-HA group than in the T-HA group. At two years postoperatively, there was a significant decrease in BMD around the proximal-medial femur (zone 6) in the N-HA group and a significant increase in the T-HA group. BMD changes in both groups correlated with BMI or preoperative lumbar BMD rather than with the extent of contact with the femoral cortical bone.

Conclusion

The N-HA-coated stem showed a significantly larger contact area, indicating a distal fixation pattern, compared with the traditional fully HA-coated stem. The T-HA-coated stem showed better preservation of periprosthetic BMD, two years postoperatively. Surgeons should consider these patterns of fixation and differences in BMD when selecting fully HA-coated stems for THA, to improve the long-term outcomes.

Dual-mobility total hip arthroplasty in patients younger than 55 years old: a systematic review

Total hip arthroplasty (THA) is regarded as one of the most successful and cost-effective orthopedic procedures. However, THA is a surgical procedure with potential intraoperative and postoperative risks. Dislocation is one of the common postoperative complications and remains one of the main indications for THA revision. The purpose of this systematic review was to evaluate the role and the outcomes of dual-mobility implant to prevent dislocation in patients younger than < 55 years in primary THA. In this systematic review, we included observational, prospective, and retrospective studies that evaluated the outcome and the complications of the dual-mobility cup in < 55-year-old patients. After applying exclusion criteria (femoral neck fractures or THA revision, case series, reviews, and meta-analyses), ten articles were included in the study. The overall number of participants in all the studies was 1530. The mean age of the participants was 50 years. The mean follow-up was 11.7 years. A total of 46 patients (2.7%) reported intraprosthetic dislocations, in which the polyethylene liner dissociates from the femoral head, while 4.8% of revision was due to aseptic loosening. The mean revision rate at twelve years was 11%. The mean value of Harris Hip Score increased from 50.9 pre-operatively to 91.6 after surgery. Dual mobility is a valid option for young patients with extended survivorship and low rates of instability and dislocation after primary THA.

Modular dual mobility articulation in primary and revision hip arthroplasty: lights and shadows

PURPOSE

The use of dual mobility cups in total hip arthroplasty has gained popularity in light of the fact it enables to reduce dislocation through increased jumping distance (JD) and impingement-free arc of movement. Modular Dual Mobility Cup (modular DMC) systems have been recently introduced to enable the use of dual mobility cups with standard metal-backed shells. The objective of this study was twofold: calculate the JD for each modular DMC system and conduct a systematic literature review to report clinical outcomes and reasons for failure of this construct.

METHODS

The JD was calculated using the Sariali formula: JD = 2Rsin [(π/2 - Ψ - arcsin (offset/R))/2]. A qualitative systematic literature review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. A comprehensive search for English and French articles between January 2000 and July 2020 was run on PubMed, EMBASE, Google Scholar, and Scopus with the primary objective of finding articles about modular DMC systems.

RESULTS

We identified eight 8 different manufacturers of modular DMC systems and 327 publications on the subject. After screening for duplicates and eligibility, we identified 229 publications: 206 articles were excluded because they contained no reports on modular DMC systems, whereas other three were not included because they focused on biomechanical aspects. Among the 11 included articles, 2 were prospective case series, 9 were retrospective case series. True dislocation occurred in 25 cases (0.9%), and six of them were solved by closed reduction without necessity of revision, while all 5 intraprosthetic dislocations were operated.

CONCLUSIONS

Modular DMCs are a valid method to deal with complex THA instability, with good clinical and patient-reported outcomes, low complication rates, and low revision rates at early follow-up. We would advise cautious optimism on the role of modular DMC implants, as it seems safer to use ceramic instead of metallic heads whenever possible to avoid the increase cobalt and chromium trace ion serum levels.

Comparing dislocation rates by approach following elective primary dual mobility total hip arthroplasty: a systematic review

BACKGROUND

Dual mobility components can be implanted during total hip arthroplasty (THA) for primary osteoarthritis via a direct anterior approach (DAA), anterolateral approach (ALA), direct lateral approach (DLA), or posterior/posterolateral approach (PLA). This review compares dual mobility hip dislocation rates using these approaches for elective primary THA.

METHODS

PubMed, Embase, and Cochrane databases were systematically searched for articles published after January 1, 2006 that reported dislocation rates for adult patients after primary THA with dual mobility implants. Articles were excluded if they reported revision procedures, nonelective THA for femoral neck fractures, acetabular defects requiring supplemental implants, prior surgery, or ≤ 5 patients. The primary outcome was hip dislocation rate. Secondary outcomes included infection, Harris Hip Score (HHS), and Postel-Merle d'Aubigné (PMA) score.

RESULTS

After screening 542 articles, 63 met inclusion criteria. Due to study heterogeneity, we did not perform a meta-analysis. Eight studies reported DAA, 5 reported ALA, 6 reported the DLA, and 56 reported PLA. Study size ranged from 41 to 2,601 patients. Mean follow-up time ranged from 6 months to 25 years. Rates of infection and dislocation were low; 80% of ALA, 87.5% of DAA, 100% of DLA, and 82.1% of PLA studies reported zero postoperative dislocations. Studies reporting postoperative HHS and PMA scores showed considerable improvement for all approaches.

CONCLUSIONS

Patients undergoing primary THA with dual mobility implants rarely experience postoperative dislocation, regardless of surgical approach. Additional studies directly comparing DAA, ALA, DLA, and PLA are needed to confirm these findings.

Posterior Approach Total Hip Arthroplasty Utilizing a Monoblock Dual-Mobility Construct Without Posterior Hip Precautions: A Series of 580 Hips with One Dislocation

BACKGROUND

Instability remains a devastating complication following total hip arthroplasty (THA). Here we describe a mini-posterior approach with a monoblock dual-mobility implant without "traditional posterior hip precautions" yielding excellent results.

METHODS

There were 580 consecutive hips in 575 patients who underwent THA utilizing a monoblock dual-mobility implant and a mini-posterior approach. With this technique, the acetabular component positioning does not rely on tradition intra-operative radiographic abduction and anteversion goals, but rather uses patient-specific anatomic landmarks (anterior acetabular rim and, when visible, the transverse acetabular ligament) to set cup position; stability is assessed with a significant, dynamic intra-operative test of range of motion. Patients' mean age was 64 years (range, 21 to 94) and 53.7% were women.

RESULTS

Mean abduction was 48.4° (range, 29° to 68°) and mean anteversion was 24.7° (range, -1 to 51°). Patient Reported Outcomes Measurement Information System scores improved in every measured domain from preoperative to final postoperative visit. There were seven (1.2%) patients who required reoperation, with mean time to reoperation of 1.3 months (range, one to 176 days). Only one patient (0.2%) who had a pre-operative history of spinal cord injury and Charcot arthropathy dislocated.

CONCLUSION

A posterior approach hip surgeon may want to consider using a monoblock dual-mobility construct and avoidance of traditional posterior hip precautions to achieve early hip stability with an extremely low dislocation rate and high patient satisfaction scores.

Time for return to sport following total hip arthroplasty: a meta-analysis

INTRODUCTION

Total Hip Arthroplasty (THA) is being increasingly undertaken in younger and more active patients, with many of these patients wanting to return to sport (RTS) after surgery. However, the percentage of patients RTS and time at which they are able to get back to sport following surgery remains unknown. The objective of this meta-analysis was to determine the time patients RTS after THA.

METHODS

A search was performed on PUBMED, MEDLINE, EMBASE, and the Cochrane Library for trials on THA and RTS, in the English language, published from the inception of the database to October 2020. All clinical trials reporting on to RTS following THA were included. Data relating to patient demographics, methodological quality, RTS, clinical outcomes and complications were recorded. The PRISMA guidelines were used to undertake this study.

RESULTS

The initial literature search identified 1720 studies. Of these, 11 studies with 2297 patients matched the inclusion criteria. 3 studies with 154 patients demonstrated an overall pooled proportion of 40.0% (95% CI, 32.5-47.9%) of patients RTS between 2 and 3 months after surgery. 4 studies with 242 patients demonstrated an overall pooled proportion of 76.9% (95% CI, 71.5-82.0) of patients RTS by 6 months after surgery. Pooled proportion analysis from 7 trials with 560 patients demonstrated 93.9% (95% CI, 82.7-99.5%) of patients RTS between 6 and 12 months after surgery.

CONCLUSIONS

Pooled proportion analysis showed increasingly more patients were able to RTS after THA over the first 1 year after surgery. There remains marked inter and intra-study variations in time for RTS but the pooled analysis shows that over 90% of patients were able to RTS at 6-12 months after THA. These finding will enable more informed discussions between patients and healthcare professionals about time for RTS following THA.

Pain After Hip Arthroplasty

MR imaging and ultrasound (US) have complementary roles for the comprehensive assessment of painful hip arthroplasty. Both modalities demonstrate synovitis, periarticular fluid collections, tendon tears and impingement, and neurovascular impingement, often with features indicating the causative etiology. MR imaging assessment requires technical modifications to reduce metal artifact, such as multispectral imaging, and optimization of image quality, and a high-performance 1.5-T system. US images periarticular structures at high-spatial resolution without interference of metal artifact, permitting real-time dynamic evaluation, and is useful for procedure guidance. Bone complications (periprosthetic fracture, stress reaction, osteolysis, and component loosening) are well depicted on MR imaging.

Dual Mobility Total Hip Replacements in Young Patients- A Systematic Review

Background

There is little consensus on outcomes of dual Mobility total hip replacement (DM-THR) in younger patients. We performed a systematic review to examine this.

Methods

A systematic review of all observational studies and randomised controlled trials of patients under 70 with primary DM-THR in MEDLINE, EMBASE, Pubmed, Cochrane was performed according to PRISMA guidelines. Collected data included demographics, revision, dislocation and infection rates and functional scores.

Results

Twelve papers studying 738 DM-THR in 664 patients were included. The mean patient age was 46.9 years (13.5-69.0), with 319 (48.0%) being female and 419 (52.0%) being male. After an average follow-up of 90.0 months (1-371 months), the revision rate was 12.7% (84 hips), 0 dislocations were reported but 2.5% (15 hips) underwent intra-prosthetic dislocation. 32.1% hip revisions were due to aseptic loosening.

Conclusion

Limited literature surrounding the use of DM-THR suggests favourable stability but higher revision rates than conventional THR.

The Role of Dual-Mobility Components in Total Hip Arthroplasty

➤

Dual mobility (DM) refers to a now widely available option for total hip articulation. DM implants feature a small inner head, a hard bearing, that connects via a taper fit onto the femoral trunnion. This head freely rotates but is encased inside a larger, outer polyethylene head that articulates with a smooth acetabular component.

➤

DM acetabular components are available in the form of a monoblock shell or as a liner that is impacted into a modular shell, providing a metal articulation for the polyethylene outer head.

➤

DM is designed to increase hip stability by providing the arthroplasty construct with a higher jump distance, head-to-neck ratio, and range of motion prior to impingement.

➤

The use of DM in total hip arthroplasty continues to increase in the United States for both primary and revision arthroplasty. Surgeons should be aware of the potential benefits and pitfalls.

➤

Long-term data are lacking, especially for modular DM implants. Points of concern include a potential for accelerated polyethylene wear, intraprosthetic dislocation, and modular backside fretting corrosion.

No Change in Serum Metal Ions Levels After Primary Total Hip Replacement With an Additively Manufactured Dual Mobility Acetabular Construct

Background

Modular junctions of mixed metals have been associated with fretting and corrosion, and in extreme circumstances, adverse local tissue reactions. Since modular dual mobility (MDM) hip constructs involve a titanium shell with a modular cobalt-chromium liner, the aim of this study was to evaluate serum metal ions at minimum 1 year following total hip arthroplasty (THA) in a cohort of patients with these types of implants.

Methods

A single surgeon enrolled 30 patients in a prospective study in which all patients were evaluated preoperatively with serum cobalt, chromium, and titanium metal ion levels. Patients underwent primary THA with an additively manufactured titanium acetabular shell, MDM cobalt-chromium liner, titanium cementless stem, and ceramic head. A “Four Quadrant Test” was used to ensure proper liner seating intraoperatively. At minimum 1 year following surgery, clinical and radiographic evaluation was conducted, and repeat metal ion levels were collected. Patient-reported outcome measures were collected preoperatively and postoperatively.

Results

Twenty-five patients completed 1-year follow-up. All patients had normal metal ion levels for cobalt (<1 μg/L), chromium (<5 μg/L), and titanium (sensitivity test) preoperatively and postoperatively. Patient-reported outcome measures improved significantly after primary THA: Veterans RAND-12 Physical Component Score (31.05 to 45.02, P < .001), Visual Analogue Scale Pain score (70.68 to 7.77, P < .001), Hip Disability and Osteoarthritis Outcomes Score, Joint Replacement (51.99 to 86.97, P < .001).

Conclusions

No significant elevation was detected in serum metal ion levels 16 months following THA using an additively manufactured titanium acetabular shell, a cobalt-chromium MDM liner, and titanium stem with a ceramic head.

A meta-analysis assessing time for return to sport following hip resurfacing

BACKGROUND

Hip resurfacing arthroplasty (HRA) is associated with excellent functional outcomes and return to pre-disease level of activity. The time for return to sport (RTS) following HRA remains unknown. The aim of this meta-analysis was to establish the time for RTS following HRA.

METHODS

A search was performed on PUBMED, MEDLINE, EMBASE, and the Cochrane Library for trials on HRA and RTS, in the English language, published from the inception of the database to October 2020. In addition, a manual search was performed of relevant sports medicine and orthopaedic journals, and the bibliographies reviewed for eligible trials. All clinical trials reporting on time to RTS following HRA were included. Data relating to patient demographics, methodological quality, operation type, RTS, clinical outcomes, and complications were recorded by two independent reviewers. The PRISMA guidelines for reporting meta-analyses was used to undertake this study.

RESULTS

The initial literature search identified 1559 studies and nine further studies were found. Of these, 11 studies with a total of 659 patients matched the inclusion criteria. Two studies involving a total of 94 patients demonstrated an overall pooled proportion of 91.8% (95% CI 71.8-100) of patients RTS by three months post-operatively. Four studies including a total of 265 patients determined a pooled proportion of 96.8% (95% CI 91.0-99.7) of patients able to RTS by the 6-month post-operative stage. Pooled proportion analysis from all 11 studies comprising 659 patients showed 90.9% (95% CI 82.2-96.9) of patients were able to RTS by final follow up of 3 years.

CONCLUSION

Pooled proportion analysis showed an increasing number of patients were able to RTS after HRA over the first one year after surgery. There remains marked inter and intra-study variations in time for RTS but the pooled analysis shows that over 80% of patients were able to RTS at 6 to 12 months after HRA. The findings of this meta-analysis will enable more informed discussions between patients and healthcare professionals about time for RTS following HRA.

Minimum Five-Year Outcomes of Modular Dual Mobility in Primary Total Hip Arthroplasty

BACKGROUND

Using a modular dual-mobility (MDM) bearing in primary total hip arthroplasty (THA) has not been widely evaluated. The purpose of this study is to evaluate clinical outcomes and survivorship following MDM bearings in primary THA.

METHODS

We used our registry database for patients with an MDM bearing on primary THA, performed by 6 surgeons through supine direct lateral or direct anterior approach. MDM bearings were used most often when impingement or subluxation was present intraoperatively despite proper component position. Another indication was a patient with planned activities who might be at a higher risk of instability postoperatively.

RESULTS

A total of 127 MDM bearings were used in primary THA in 119 patients. Mean follow-up was 6.77 years (range 5-8.9). Five hips were revised, none of which were due to MDM bearing failure. Preoperative Hip dysfunction and Osteoarthritis Outcome Score for Joint Replacement, Veterans RAND/Short Form 12 Physical Health Score and Mental Health Score increased from 25.81 to 52.40 (P < .0001), 30.42 to 44.50 (P < .0001), and 36.21 to 52.70 (P < .0001) at latest completed survey follow-up, respectively.

CONCLUSION

This MDM bearing shows excellent functional outcomes at a minimum 5 years of follow-up with no bearing-related failures. It can be an excellent choice in primary THA specifically in females where the use of increased head size to prevent instability is not possible due to anatomical restrictions and liner thickness.

In Revision THA, Is the Re-revision Risk for Dislocation and Aseptic Causes Greater in Dual-mobility Constructs or Large Femoral Head Bearings? A Study from the Australian Orthopaedic Association National Joint Replacement Registry

BACKGROUND

Dislocation is one of the most common causes of a re-revision after a revision THA. Dual-mobility constructs and large femoral head bearings (≥ 36 mm) are known options for mitigating this risk. However, it is unknown which of these choices is better for reducing the risk of dislocation and all-cause re-revision surgery. It is also unknown whether there is a difference between dual-mobility constructs and large femoral head bearings according to the size of the acetabular component.

QUESTIONS/PURPOSES

We used data from a large national registry to ask: In patients undergoing revision THA for aseptic causes after a primary THA performed for osteoarthritis, (1) Does the proportion of re-revision surgery for prosthesis dislocation differ between revision THAs performed with dual-mobility constructs and those performed with large femoral head bearings? (2) Does the proportion of re-revision surgery for all aseptic causes differ between revision THAs performed with dual-mobility constructs and those performed with large femoral head bearings? (3) Is there a difference when the results are stratified by acetabular component size?

METHODS

Data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) were analyzed for 1295 first-revision THAs for aseptic causes after a primary THA performed for osteoarthritis. The study period was from January 2008-when the first dual-mobility prosthesis was recorded-to December 2019. There were 502 dual-mobility constructs and 793 large femoral head bearings. There was a larger percentage of women in the dual-mobility construct group (67% [334 of 502]) compared with the large femoral head bearing group (51% [402 of 793]), but this was adjusted for in the statistical analysis. Patient ages were similar for the dual-mobility construct group (67 ± 11 years) and the large femoral head group (65 ± 12 years). American Society of Anesthesiologists (ASA) class and BMI distributions were similar. The mean follow-up was shorter for dual-mobility constructs at 2 ± 1.8 years compared with 4 ± 2.9 years for large femoral head bearings. The cumulative percent revision (CPR) was determined for a diagnosis of prosthesis dislocation as well as for all aseptic causes (excluding infection). Procedures using metal-on-metal bearings were excluded. The time to the re-revision was described using Kaplan-Meier estimates of survivorship, with right censoring for death or database closure at the time of analysis. The unadjusted CPR was estimated each year of the first 5 years for dual-mobility constructs and for each of the first 9 years for large femoral head bearings, with 95% confidence intervals using unadjusted pointwise Greenwood estimates. The apparent shorter follow-up of the dual-mobility construct group relates to the more recent increase in dual-mobility numbers recorded in the registry. The results were adjusted for age, gender, and femoral fixation. Results were subanalyzed for acetabular component sizes < 58 mm and ≥ 58 mm, set a priori on the basis of biomechanical and other registry data.

RESULTS

There was no difference in the proportion of re-revision for prosthesis dislocation between dual-mobility constructs and large femoral head bearings (hazard ratio 1.22 [95% CI 0.70 to 2.12]; p = 0.49). At 5 years, the CPR of the re-revision for prosthesis dislocation was 4.0% for dual mobility constructs (95% CI 2.3% to 6.8%) and 4.1% for large femoral head bearings (95% CI 2.7% to 6.1%). There was no difference in the proportion of all aseptic-cause second revisions between dual-mobility constructs and large femoral head bearings (HR 1.02 [95% CI 0.76 to 1.37]; p = 0.89). At 5 years, the CPR of dual-mobility constructs was 17.6% for all aseptic-cause second revision (95% CI 12.6% to 24.3%) and 17.8% for large femoral head bearings (95% CI 14.9% to 21.2%). When stratified by acetabular component sizes less than 58 mm and at least 58 mm, there was no difference in the re-revision CPR for dislocation or for all aseptic causes between dual-mobility constructs and large femoral head bearings.

CONCLUSION

Either dual-mobility constructs or large femoral head bearings can be used in revision THA, regardless of acetabular component size, as they did not differ in terms of re-revision rates for dislocation and all aseptic causes in this registry study. Longer term follow-up is required to assess whether complications develop with either implant or whether a difference in revision rates becomes apparent. Ongoing follow-up and comparison in a registry format would seem the best way to compare long-term complications and revision rates. Future studies should also compare surgeon factors and whether they influence decision-making between prosthesis options and second revision rates. Nested randomized controlled trials in national registries would seem a viable option for future research.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Do Modular Dual Mobility Cups Offer a Reliable Benefit? Minimum 5-Year Follow-Up of 102 Cups

BACKGROUND

Among various options suggested to prevent hip instability after total hip replacement, the MDM-tritanium (modular dual mobility) cup features a cobalt-chrome liner (CoCr) positioned in a titanium acetabular shell and matched with a mobile insert in highly cross-linked annealed X3 polyethylene. The purpose of this study aimed to confirm whether there was no significant release of ions (Co and Cr) or higher occurrence of dislocation or even cases of aseptic loosening of the cementless shell with the use of MDM-tritanium cups at minimum of 5-year follow-up.

METHODS

The clinical study was carried out on a homogeneous consecutive and nonselective series with 102 MDM cups (98 patients) implanted in 2 centers. This MDM-tritanium cup had been systematically used for surgical revisions (70% of cases) or for patients with major hip dysplasia or in elderly patients with poor bone quality. A biological assessment of ion releases has been performed in a specific cohort of 39 cases that had an internal ceramic head.

RESULTS

None of the following complications was observed: no case of immunoallergic event, no aseptic loosening, and the dislocation rate was 4.9% involving only the difficult primary and revision cases. The clinical results were encouraging, with 89.7 points for Harris Hip Score, 41.16 points/48 for the OHS-12. The Agora Roentgenographic Assessment (ARA) radiologic score was graded "excellent" in 94.4%. The MDM-tritanium survivorship with revision for any cause in 102 cups at 7.95 years was 92.7%.

CONCLUSION

Based on the results of our first 102 cases, there were no immunoallergic complications-contrary to what was initially feared with the CoCr bearing-titanium pair-and no postoperative instability, including for complex primary and revisions total hip replacements.

LEVEL OF EVIDENCE

Individual Cohort Study: 2B.

Hip stability parameters with dual mobility, modular dual mobility and fixed bearing in total hip arthroplasty: an analytical evaluation

Background

Use of dual mobility (DM) in total hip arthroplasty has gained popularity due to the ability to reduce dislocation through increased jumping distance and impingement-free arc of movement. Recently, modular dual mobility (modDM) systems were introduced to give the possibility to use DM with standard metal-backed shells, however few has been studied to date regarding how jumping distance and the center of rotation change with modDM. The objective of this study was to evaluate, through analytical simulation, how jumping distance, center of rotation and arc of movement change between DM and standard cups with modDM or fixed bearings (FB).

Methods

3D-models of DM and standard press-fit cups with modDM or FB liners were used to simulate DM, modDM and FB implant configurations, matched for same cup size, according to same cup position and different femoral head diameters. Jumping distance was calculated and center of rotation lateralization and oscillation angles were measured for each size of these three implant configurations.

Results

Jumping distance with modDM was reduced by -3.9 mm to -8.6 mm in comparison with DM, from 48 to 64 mm size, but resulted comparable to polyethylene 36 mm FB and increased by + 1.1 mm and + 1.4 mm than ceramic 36 and 40 mm FBs for sizes > 54 mm. ModDM lateralized the center of rotation up to + 2.5 mm and + 4.0 mm in comparison with DM and FBs, respectively. Oscillation angle with modDM resulted higher than + 16°, + 23°, + 17° and + 14° in comparison to DM, 28 mm, 32 mm and 36 mm FB cups, respectively, for 56 mm cup size.

Conclusions

According to its specific design, modDM might change hip stability parameters in comparison to DM, worsening jumping distance and center of rotation position, but increasing arc of movement. As not restoring stability parameters in the same fashion, modDM implants should be properly used when DM cups are not feasible.

Dual-mobility constructs versus large femoral head bearings in primary and revision total hip arthroplasty: a systematic review and meta-analysis of comparative studies

BACKGROUND

Both dual-mobility (DM) constructs and large femoral head bearings (⩾36 mm) reduce dislocation following total hip arthroplasty (THA). There is limited research comparing DM with large bearings.

METHODS

A systematic review of published literature was performed including studies that compared DM with large femoral head bearings in primary or revision THA according to PRISMA guidelines. The primary outcome was revision surgery for dislocation. The secondary outcome was all-cause revision surgery. Other complications were recorded. 2 authors independently selected studies, performed data extraction, and risk of bias assessment. Treatment effects were assessed using odds ratios and data were pooled using a fixed-effect model, where appropriate.

RESULTS

9 studies, all retrospective, met the final inclusion criteria. 2722 patients received DM and 9,789 large femoral head bearings. The difference in the odds of revision surgery for dislocation (OR 0.67; 95% CI, 0.45-1.01; p = 0.06) and aseptic loosening are unclear (OR 0.61; 95% CI, 0.36-1.05; p = 0.07); including important benefits and no difference. There was a benefit favouring DM for the risk of all-cause revision (OR 0.70; 95% CI, 0.56-0.86; p = 0.001), revision for fracture (OR 0.49; 95% CI, 0.29-0.81; p = 0.005) and dislocation not requiring revision (OR 0.29; 95% CI, 0.14-0.57; p < 0.001). The estimate in the difference in the odds of revision surgery for infection was imprecise (OR 0.78; 95% CI, 05.1-1.20; p = 0.26).

CONCLUSIONS

This study provides evidence that there may be clinically relevant benefits of DM constructs over large femoral head bearings. Prospective randomised studies are warranted given these findings.

Prevention of early complications following total hip replacement

Total hip arthroplasty (THA) has been quoted as "the operation of the century", owing to its efficacy and the substantial improvements evidenced with respect to functional patient outcomes and quality of life. However, early postoperative complications are often inevitable, hence it is imperative to take every step to prevent them and minimise morbidity and mortality. This manuscript focuses on the most common early complications following THA, namely venous thromboembolism (VTE), prosthetic joint infection, periprosthetic fracture, instability, and leg length inequality. It aims to outline effective risk stratification strategies and prevention measures that could apply to the wider Orthopaedic community.

Serum Metal Ions in Contemporary Monoblock and Modular Dual Mobility Articulations

Background

Questions exist about the release of cobalt and chromium ions from dual mobility (DM) cups. Modular implants, with potential backside wear between the cobalt-chromium liner and titanium cup, are of particular concern. This study compares the metal ion profile of patients with contemporary monoblock and modular DM articulations from two commonly used designs.

Methods

Cobalt and chromium serum levels were measured one year after surgery in a prospective cohort of patients undergoing total hip arthroplasty with a DM construct. Ion levels were detected above 1 μg/L. Clinical and surgical data were correlated with the ion levels for analysis.

Results

Overall, 29% of the patients had levels above 1 μg/L of either ion. More patients with modular cups had detectable ions than patients with monoblock cups (39% vs 20%, P = .05). Cobalt was more commonly detected in the monoblock group, and chromium was more commonly detected in the modular group (P = .05). There were no differences in the actual ion levels between the groups (1.35 μg/L vs 1.64 μg/L, P = .44, for cobalt and 1.35 μg/L vs 1.31 μg/L, P = .77, for chromium). No patient underwent revision during the follow-up period.

Conclusions

We found similar cobalt and chromium levels in patients with monoblock and modular DM cups. More patients in the modular group had detectable ions. Cobalt was more frequently detected in the monoblock group. These results suggest that both implants are performing well in the short term, but further follow-up is needed to determine whether the differences found are of clinical significance.

A Comparison of Revision Rates for Dislocation and Aseptic Causes Between Dual Mobility and Large Femoral Head Bearings in Primary Total Hip Arthroplasty With Subanalysis by Acetabular Component Size: An Analysis of 106,163 Primary Total Hip Arthroplasties

BACKGROUND

Dual mobility (DM) and large femoral head bearings (≥36 mm) both decrease the risk of dislocation in total hip arthroplasty (THA). There is limited comparable data in primary THA. This study compared the revision rates for dislocation and aseptic causes between DM and large femoral heads and subanalyzed by acetabular component size.

METHODS

Data from the Australian Orthopedic Association National Joint Replacement Registry were analyzed for patients undergoing primary THA for osteoarthritis from January 2008 (the year of first recorded DM use) to December 2019. All DM and large femoral head bearings were identified. The primary outcome measure was the cumulative percent revision (CPR) for dislocation and for all aseptic causes. The results were adjusted by age, sex, and femoral fixation. A subanalysis was performed stratifying acetabular component diameter <58 m and ≥58 mm.

RESULTS

There were 4942 DM and 101,221 large femoral head bearings recorded. There was no difference in the CPR for dislocation (HR = 0.69 (95% CI 0.42, 1.13), P = .138) or aseptic causes (HR = 0.91 (95% CI 0.70, 1.18), P = .457). When stratified by acetabular component size, DM reduced the CPR for dislocation in acetabular component diameter <58 mm (HR = 0.55 (95% CI 0.30, 1.00), P = .049). There was no difference for diameter ≥58 mm. There was no difference in aseptic revision when stratified by acetabular component diameter.

CONCLUSION

There is no difference in revision rates for dislocation or aseptic causes between DM and large femoral heads in primary THA. When stratified by acetabular component size, DM reduces dislocation for acetabular component diameter <58 mm.

LEVEL OF EVIDENCE

Level III.

Fretting and corrosion of metal liners from modular dual mobility constructs : a retrieval analysis

AIMS

Dual mobility implants in total hip arthroplasty are designed to increase the functional head size, thus decreasing the potential for dislocation. Modular dual mobility (MDM) implants incorporate a metal liner (e.g. cobalt-chromium alloy) in a metal shell (e.g. titanium alloy), raising concern for mechanically assisted crevice corrosion at the modular liner-shell connection. We sought to examine fretting and corrosion on MDM liners, to analyze the corrosion products, and to examine histologically the periprosthetic tissues.

METHODS

A total of 60 retrieved liners were subjectively scored for fretting and corrosion. The corrosion products from the three most severely corroded implants were removed from the implant surface, imaged using scanning electron microscopy, and analyzed using Fourier-transform infrared spectroscopy.

RESULTS

Fretting was present on 88% (53/60) of the retrieved liners, and corrosion was present on 97% (58/60). Fretting was most often found on the lip of the taper at the transition between the lip and the dome regions. Macrophages and particles reflecting an innate inflammatory reaction to corrosion debris were noted in six of the 48 cases for which periprosthetic tissues were examined, and all were associated with retrieved components that had high corrosion scores.

CONCLUSION

Our results show that corrosion occurs at the interface between MDM liners and shells and that it can be associated with reactions in the local tissues, suggesting continued concern that this problem may become clinically important with longer-term use of these implants. Cite this article: Bone Joint J 2021;103-B(7):1238-1246.

Modular dual mobility total hip arthroplasty is a viable option for young, active patients : a mid-term follow-up study

AIMS

Dual mobility (DM) implants have been shown to reduce the dislocation rate after total hip arthroplasty (THA), but there remain concerns about the use of cobalt chrome liners inserted into titanium shells. The aim of this study was to assess the clinical outcomes, metal ion levels, and periprosthetic femoral bone mineral density (BMD) at mid-term follow-up in young, active patients receiving a modular DM THA.

METHODS

This was a prospective study involving patients aged < 65 years, with a BMI of < 35 kg/m², and University of California, Los Angeles activity score of > 6 who underwent primary THA with a modular cobalt chrome acetabular liner, highly cross-linked polyethylene mobile bearing, and a cementless titanium femoral stem. Patient-reported outcome measures, whole blood metal ion levels (μg/l), and periprosthetic femoral BMD were measured at baseline and at one, two, and five years postoperatively. The results two years postoperatively for this cohort have been previously reported.

RESULTS

A total of 43 patients were enrolled. At minimum follow-up of five years, 23 (53.4%) returned for clinical and radiological review, 25 (58.1%) had metal ion analysis performed, 19 (44.2%) underwent dual energy x-ray absorptiometry scans, and 25 (58%) completed a pain-drawing questionnaire. The mean modified Harris Hip Scores improved significantly from 54.8 (SD 19) preoperatively to 93.08 (SD 10.5) five years postoperatively (p < 0.001). One patient was revised for aseptic acetabular loosening. The mean cobalt levels increased from 0.065 μg/l (SD 0.03) to 0.08 (SD 0.05) and the mean titanium levels increased from 0.35 (SD 0.13) to 0.78 (SD 0.29). The femoral BMD ratio decreased in Gruen Zone 1 (91.9%) at five years postoperatively compared with the baseline scores at six weeks potoperatively. The femoral BMD ratio was maintained in Gruen zones 2 to 7.

CONCLUSION

The use of a modular DM component and a cementless, tapered femoral stem shows excellent mid-term survivorship with minimal concerns for corrosion and metal ion release in a cohort of young, active patients undergoing primary THA. Cite this article: Bone Joint J 2021;103-B(7 Supple B):73-77.

Clinical Concerns With Dual Mobility- Should I Avoid it When Possible?

The utilization of dual mobility (DM) articulations in total hip arthroplasty (THA) is increasing. The principal appeal of DM implants is its ability to reduce postoperative instability by maximizing the effective ball head size for each reconstruction. However, while DM implants have been used worldwide for over 3 decades, the experience in North America is more limited. Moreover, there remains concerns with intraprosthetic dissociation, wear, metallosis, and soft tissue impingement. Therefore, the purpose of this article is to review the available evidence for these potential issues. First, intraprosthetic dissociation (IPD) is a unique complication of DM implants. Although the rate has decreased with improvements in materials and design, the reported prevalence is approximately 1%. Second, wear in DM implants can be unpredictable and increased wear has been reported in younger, active patients. Third, corrosion in modular DM implants has been described and elevations in serum cobalt and chromium levels have been reported. While the clinical significance of these elevations is unclear, it remains a source of concern with these implants. Finally, psoas impingement and entrapment can be a source of persistent groin pain after THA. DM articulations are a valuable addition to the armamentarium of total hip surgeons. However, these bearings are not free of complications. Consequently, current data only support selective use of DM bearings in patients at increased risk for postoperative instability after arthroplasty.

Spine Fusions, Yoga Instructors, and Hip Fractures: The Role of Dual Mobility in Primary Total Hip Arthroplasty

BACKGROUND

Despite the increased use of dual mobility (DM) in primary total hip arthroplasty (THA), debate exists regarding the indications for its use. No specific algorithm exists to guide this decision-making process. Therefore, the purpose of this article is to summarize the currently available literature regarding the use of DM in primary THA and provide evidence-based guidelines based on specific patient populations and risk factors for instability.

METHODS

We reviewed the current literature for studies evaluating risk factors for dislocation in primary THA, as well as the clinical use and results of DM in primary THA. Based on the strength of the literature, we discuss the use of DM in specific patient populations. We provide a decision-making algorithm to determine whether a patient may be indicated for DM in primary THA.

RESULTS

Surgeons should consider preoperative patient demographics, risk factors for instability (eg, significant hip-spine issues), type of procedure to be performed (eg, conversion arthroplasty), and indications for surgery (eg, THA for femoral neck fracture). Based on this algorithmic assessment, DM may be warranted in the primary THA setting if a patient's combined risk reaches an established threshold based on the literature.

CONCLUSION

This evidence-based algorithm may help guide current practice in the use of DM in primary THA. We advocate the continued judicious use of DM in hip arthroplasty. Longer term studies are needed in order to evaluate the durability of DM, as well as any complications related to the DM articulation.

Risk factors and modes of failure in the modern dual mobility implant. A systematic review and meta-analysis

Background

The aims of this meta-analysis were to: (1) validate the outcome of modern dual mobility (DM) designs in patients who had undergone primary and revision total hip arthroplasty (THA) procedures and (2) to identify factors that affect the outcome.

Methods

We searched for studies that assessed the outcome of modern DM-THA in primary and revision procedures that were conducted between January, 2000 to August, 2020 on PubMed, MEDLINE, Cochrane Reviews and Embase. The pooled incidence of the most common failure modes and patient reported outcomes were evaluated in patients who have received: (1) primary THA, (2) revision THA for all causes or (3) for recurrent dislocation. A meta-regression analysis was performed for each parameter to determine the association with the outcome. The study design of each study was assessed for potential bias and flaws by using the quality assessment tool for case series studies.

Results

A total of 119 studies (N= 30016 DM-THAs) were included for analysis. The mean follow-up duration was 47.3 months. The overall implant failure rate was 4.2% (primary: 2.3%, revision for all causes: 5.5%, recurrent dislocation: 6.0%). The most common failure modes were aseptic loosening (primary: 0.9%, revision for all causes: 2.2%, recurrent dislocation: 2.4%), septic loosening (primary:0.8%, revision for all causes: 2.3%, recurrent dislocation: 2.5%), extra-articular dislocation (primary:0.6%, revision for all causes:1.3%, recurrent dislocation:2.5%), intra-prosthetic dislocation (primary:0.8%, revision for all causes:1.0%, recurrent dislocation:1.6%) and periprosthetic fracture (primary:0.9%, revision for all causes:0.9%, recurrent dislocation:1.3%). The multi-regression analysis identified younger age (β=-0.04, 95% CI -0.07 – -0.02) and female patients (β=3.34, 95% CI 0.91–5.78) were correlated with higher implant failure rate. Age, gender, posterolateral approach and body mass index (BMI) were not risk factors for extra-articular or intra-prosthetic dislocation in this cohort. The overall Harris hip score and Merle d’Aubigné score were 84.87 and 16.36, respectively. Level of evidence of this meta-analysis was IV.

Conclusion

Modern dual-mobility designs provide satisfactory mid-term implant survival and clinical performance. Younger age and female patients might impact the outcome after DM-THA. Future research directions should focus on, (1) long-term outcome of modern dual-mobility design, including specific concerns such as intra-prosthetic dislocation and elevated metal ion, and (2) cost-effectiveness analysis of dual-mobility implant as an alternative to conventional THA for patients who are at high risk of dislocation.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-021-04404-4.

Adverse reaction to metal debris due to fretting corrosion between the acetabular components of modular dual-mobility constructs in total hip replacement: a systematic review and meta-analysis

Modular dual-mobility (MDM) constructs can be used to reduce dislocation rates after total hip replacement (THR). However, there are concerns about adverse reaction to metal debris (ARMD) as a result of fretting corrosion between the metal liner and shell. This systematic review reports outcomes following THR using MDM components. It was registered with PROSPERO and conducted in line with Cochrane and PRISMA recommendations.Sixteen articles were included overall, with meta-analysis performed on relevant subsets using a random intercept logistic regression model. Estimated median incidence of ARMD requiring revision surgery within study follow-up period was 0.3% (95% CI 0.1 - 1.8%, from 11 cohort studies containing 1312 cases).Serum metal ion levels were mildly raised in 7.9% of cases, and significantly raised in 1.8%, but there was no correlation with worse clinical hip function scores within studies. Dislocation rate was 0.8%. Revision rate was 3.3%.There are mixed reports of wear on the backside of the metal liner from the acetabular shell and screw heads. Both implant design and component malseating are implicated, but currently it is unclear to what extent each factor is responsible.Studies were poor quality with high risk of confounding, especially from trunnion corrosion. We have made recommendations for further work. In the meantime, surgeons should be aware of the potential risk of ARMD when considering using an MDM prosthesis, and, if selecting one, must ensure proper seating of the liner and screws intraoperatively. Cite this article: EFORT Open Rev 2021;6:343-353. DOI: 10.1302/2058-5241.6.200146.

Metal ion levels with use of modular dual mobility constructs: Can the evidence guide us on clinical use?

Introduction

Dual mobility (DM) use in total hip arthroplasty (THA) has increased, particularly for prevention and management of instability. However, a modular interface raises concern for metal ion generation. The purpose of this study was to determine the 1) serum cobalt and chromium levels; 2) prevalence of ion levels >1 mcg/L; and 3) effect of femoral head material on ion levels following THA using modular DM bearings.

Methods

We performed a systematic review (MEDLINE, Embase, Cochrane databases) for articles relating to metal ion levels and modular DM (MDM) THA. Eight studies (290 patients) met the inclusion criteria. We recorded post-operative ion levels at a minimum of 12 months, and compared levels with ceramic (n = 125) and metal femoral heads (n = 165). A meta-analysis could not be performed due to poor study quality and heterogeneity.

Results

At average follow-up of 30.4 months, mean cobalt level was 0.71 mcg/L, and mean chromium level was 0.66 mcg/L [22 patients (8%) had elevated ion levels above 1 mcg/L]. When compared to MDM with a ceramic head, metal head use had higher cobalt (1.26 vs. 0.42 mcg/L) and chromium levels (1.23 vs. 0.46 mcg/L). MDM with a metal head was 1.30 times more likely to have elevated ion levels >1 mcg/L. There was no effect of ion levels on outcome scores.

Conclusions

Measurable elevations of serum cobalt and chromium levels are present in patients with well-functioning MDM THAs. The impact and contributions of the additional metal liner interface are still unclear. The use of a ceramic head appears to mitigate ion release, while reducing other mechanisms of metallosis like taper corrosion. Higher quality studies are necessary to understand whether MDM bearings pose long term issues. Until then, the judicious use of MDM articulations is recommended.

Dual mobility total hip arthroplasty in the treatment of femoral neck fractures

AIMS

To evaluate the rate of dislocation following dual mobility total hip arthroplasty (DM-THA) in patients with displaced femoral neck fractures, and to compare rates of dislocation, surgical-site infection, reoperation, and one-year mortality between DM-THA and bipolar hemiarthroplasty (BHA).

METHODS

Studies were selected based on the following criteria: 1) study design (retrospective cohort studies, prospective cohort studies, retrospective comparative studies, prospective comparative studies, and randomized controlled studies (RCTs)); 2) study population (patients with femoral neck fracture); 3) intervention (DM-THA or BHA); and 4) outcomes (complications during postoperative follow-up and clinical results). Pooled meta-analysis was carried out to evaluate the dislocation rate after DM-THA and to compare outcomes between DM-THA and BHA.

RESULTS

A total of 17 studies (ten cohort studies on DM-THA and seven comparative studies of DM-THA and BHA) were selected. These studies included 2,793 patients (2,799 hips), made up of 2,263 DM-THA patients (2,269 hips) and 530 BHA patients (530 hips). In all, 16 studies were analyzed to evaluate dislocation rate after DM-THA. The cumulative dislocation rate was 4% (95% confidence interval (CI) 3 to 5). Seven studies were analyzed to compare the rates dislocation and surgical-site infection. The rate of dislocation was significantly lower in the DM-THA group than in the BHA group (risk ratio (RR) 0.3; 95% CI 0.17 to 0.53, p < 0.001, Z -4.11). There was no significant difference in the rate of surgical-site infection between the two groups (p = 0.580). Six studies reported all-cause reoperations. The rate of reoperation was significantly lower in the DM-THA group than in the BHA group (RR 0.5; 95% CI 0.32 to 0.78, p = 0.003, Z -3.01). Five studies reported one-year mortality. The mortality rate was significantly lower in the DM-THA group than in the BHA group (RR 0.58 95% CI 0.45 to 0.75, p < 0.0001, Z -4.2).

CONCLUSION

While the evidence available consisted mainly of non-randomized studies, DM-THA appeared to be a viable option for patients with displaced fractures of the femoral neck, with better reported rates of dislocation, reoperation, and mortality than BHA. Cite this article: Bone Joint J 2020;102-B(11):1457-1466.

Dual mobility total hip arthroplasty in the treatment of femoral neck fractures

Aims

To evaluate the rate of dislocation following dual mobility total hip arthroplasty (DM-THA) in patients with displaced femoral neck fractures, and to compare rates of dislocation, surgical-site infection, reoperation, and one-year mortality between DM-THA and bipolar hemiarthroplasty (BHA).

Methods

Studies were selected based on the following criteria: 1) study design (retrospective cohort studies, prospective cohort studies, retrospective comparative studies, prospective comparative studies, and randomized controlled studies (RCTs)); 2) study population (patients with femoral neck fracture); 3) intervention (DM-THA or BHA); and 4) outcomes (complications during postoperative follow-up and clinical results). Pooled meta-analysis was carried out to evaluate the dislocation rate after DM-THA and to compare outcomes between DM-THA and BHA.

Results

A total of 17 studies (ten cohort studies on DM-THA and seven comparative studies of DM-THA and BHA) were selected. These studies included 2,793 patients (2,799 hips), made up of 2,263 DM-THA patients (2,269 hips) and 530 BHA patients (530 hips). In all, 16 studies were analyzed to evaluate dislocation rate after DM-THA. The cumulative dislocation rate was 4% (95% confidence interval (CI) 3 to 5). Seven studies were analyzed to compare the rates dislocation and surgical-site infection. The rate of dislocation was significantly lower in the DM-THA group than in the BHA group (risk ratio (RR) 0.3; 95% CI 0.17 to 0.53, p < 0.001, Z −4.11). There was no significant difference in the rate of surgical-site infection between the two groups (p = 0.580). Six studies reported all-cause reoperations. The rate of reoperation was significantly lower in the DM-THA group than in the BHA group (RR 0.5; 95% CI 0.32 to 0.78, p = 0.003, Z −3.01). Five studies reported one-year mortality. The mortality rate was significantly lower in the DM-THA group than in the BHA group (RR 0.58 95% CI 0.45 to 0.75, p < 0.0001, Z −4.2).

Conclusion

While the evidence available consisted mainly of non-randomized studies, DM-THA appeared to be a viable option for patients with displaced fractures of the femoral neck, with better reported rates of dislocation, reoperation, and mortality than BHA.

Serum metal ion levels in modular dual mobility acetabular components: A systematic review

Background

Dual mobility (DM) constructs effectively reduce the risk of dislocation in revision and high risk primary total hip arthroplasty. However, modular DM designs require the use of a cobalt-chrome liner against a titanium cup which may induce corrosion, metal ions release, and associated biologic response. The purpose of this systematic review study was to collect all reported cases of serum metal ions after DM in the literature and ask the following questions: 1) what is the overall rate of significantly elevated Cobalt and Chromium metal ions and how do these levels change over time? 2) Does femoral head material composition influence serum metal ion levels? and 3) were there any atypical lymphocytic associated lesions after modular DM that required revision surgery?

Methods

A systematic review was performed according to PRISMA guidelines. In addition to patient demographics, information specific to the performance of the DM implant were recorded including: cobalt and chromium serum ion levels and all reported timepoints, the material composition of the femoral head, all revision and reoperations and any failure related to corrosion of the DM bearing. A significant elevation in cobalt or chromium was defined as >1.0 or >1.6 mcg/L.

Results

248 modular DM THAs were analyzed. The cumulative mean cobalt and chromium levels for all included studies was 0.47mcg/L and 0.53mcg/L, respectively. At final follow-up 13 patients (5.2%) had elevated cobalt ion levels and 4 patients (1.6%) had elevated chromium ion levels. Femoral head material composition trended towards but did not significantly increase serum ion levels. Ceramic heads had elevated cobalt and chromium ions in 4/135 (3%) of patients compared to metal heads which had elevated cobalt ions in 9/113 (8%) and elevated chromium ions in 0/113 (0%), (p = 0.09). There were no reoperations or revisions for metal related reactions at final follow-up (mean 27.4 months).

Conclusion

In this systematic review including 248 modular DM THAs, elevated serum cobalt ions were present in 5.2% of patients at a mean follow-up of 27.4 months. While a trend towards increased Cobalt serum ions with the use of cobalt chrome femoral heads, femoral head composition was not significantly associated with increased serum metal ion levels. At final follow-up, metal ion levels appear to decrease in the majority of patients between 1 and 2 years and no patient was revised for metal ion related complications. Continued serum metal ion surveillance is recommended to ensure the safety of DM constructs in THA with longer term follow-up.

Korean epidemiology and trends in hip joint replacements

This study aimed to analyze the epidemiologic characteristics of patients who underwent hip arthroplasty using the Korean nationwide database and investigate the recent trends in implant fixation methods and bearing surface selection. We aimed to compare clinical characteristics and differences with the results from the registry of other western countries. We analyzed the data collected by the Health Insurance Review and Assessment Service database of Korea from 2007 to 2011 and the Main Surgery Statistical Yearbook from 2014 to 2018, published by the National Health Insurance Service. The number and rate of patients who underwent hip joint arthroplasty per 10,000 persons have been steadily increasing since 2007. There was a big difference in mean age and preoperative diagnosis of patients between the bipolar hemiarthroplasty and total hip arthroplasty groups. Most patients underwent surgery using a cementless biological fixation method, and the cemented fixation method was selectively used for a small portion of old aged osteoporotic patients. In relation to the use of bearing surfaces, the registry data showed that ceramic-ceramic bearings were used at an overwhelmingly high rate (81%) in Korea compared to other countries. The reason was attributable to various factors, such as patient’s age or economic status, differences in the health insurance system between countries, and recently reported complications, such as ceramic fracture or noise.

Pelvic mobility before and after total hip arthroplasty

BACKGROUND

Pre-operative evaluation of pelvic motion using the sacral slope (SS) has been proposed for risk assessment of dislocation after total hip arthroplasty (THA). The purposes of this study were to elucidate the statistical characteristics of pre-operative and post-operative pelvic mobility and investigate the relationship between pre-operative spinopelvic factors and post-operative pelvic mobility.

METHODS

Eighty-six patients with osteoarthritis were assessed. The parameters evaluated were lumbar lordosis angle and the SS in the standing and sitting preo-peratively and post-operatively. The pelvic mobility was defined as the difference in the SS between standing and sitting. The presence of osteoarthritis in the contralateral hip, spondylolisthesis, vertebral compression fracture and lumbar scoliosis was investigated.

RESULTS

The median (interquartile range) pre-operative and post-operative pelvic mobility was 19.0 (13.75-27.0) and 16.0 (10.0-25.25), respectively, with significant difference. The pre-operative SS while standing and pre-operative pelvic mobility were associated with post-operative pelvic mobility (r = 0.409, P < 0.05 and r = 0.533, P < 0.05). The multivariate linear regression analysis showed that the following factors contributed to post-operative pelvic mobility: incidence of osteoarthritis in the contralateral hip, lumbar scoliosis, pre-operative SS while standing and pre-operative SS while sitting.

CONCLUSION

The pre-operative and post-operative pelvic mobility is not equal and ranges widely among patients. In addition to assessment of pre-operative pelvic mobility, other pre-operative spinopelvic factors may also influence post-operative pelvic mobility, such as the SS while standing and sitting, the condition of the contralateral hip and the presence of scoliosis. Risk assessment for dislocation using these pre-operative factors may be useful before THA.

Trends in the use of dual mobility bearings in hip arthroplasty

Aims

Dual mobility (DM) bearings are an attractive treatment option to obtain hip stability during challenging primary and revision total hip arthroplasty (THA) cases. The purpose of this study was to analyze data submitted to the American Joint Replacement Registry (AJRR) to characterize utilization trends of DM bearings in the USA.

Methods

All primary and revision THA procedures reported to AJRR from 2012 to 2018 were analyzed. Patients of all ages were included and subdivided into DM and traditional bearing surface cohorts. Patient demographics, geographical region, hospital size, and teaching affiliation were assessed. Associations were determined by chi-squared analysis and logistic regression was performed to assess outcome variables.

Results

A total of 406,900 primary and 34,745 revision THAs were identified, of which 35,455 (8.7%) and 8,031 (23.1%) received DM implants respectively. For primary THA, DM usage increased from 6.7% in 2012 to 12.0% in 2018. Among revision THA, DM use increased from 19.5% in 2012 to 30.6% in 2018. Patients < 50 years of age had the highest rates of DM implantation in every year examined. For each year of increase in age, there was a 0.4% decrease in the rate of DM utilization (odds ratio (OR) 0.996 (95% confidence interval (CI) 0.995 to 0.997); p < 0.001). Females were more likely to receive a DM implant compared to males (OR 1.077 (95% CI 1.054 to 1.100); p < 0.001). Major teaching institutions and smaller hospitals were associated with higher rates of utilization. DM articulations were used more commonly for dysplasia compared with osteoarthritis (OR 2.448 (95% CI 2.032 to 2.949); p < 0.001) during primary THA and for instability (OR 3.130 (95% CI 2.751 to 3.562) vs poly-wear; p < 0.001) in the revision setting.

Conclusion

DM articulations showed a marked increase in utilization during the period examined. Younger patient age, female sex, and hospital characteristics such as teaching status, smaller size, and geographical location were associated with increased utilization. DM articulations were used more frequently for primary THA in patients with dysplasia and for revision THA in patients being treated for instability. Cite this article: Bone Joint J 2020;102-B(7 Supple B):27–32.

Blood metal levels, leucocyte profiles, and cytokine profiles in patients with a modular dual-mobility hip prosthesis: early results from a prospective cohort study

AIMS

The aim of this study was to evaluate blood metal ion levels, leucocyte profiles, and serum cytokines in patients with a total hip arthroplasty (THA) involving modular dual-mobility components.

PATIENTS AND METHODS

A total of 39 patients were recruited, with clinical follow-up of up to two years. Outcome was assessed using the Harris Hip Score (HHS, the 12-Item Short-Form Health Survey (SF-12), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and a visual analogue scale (VAS) for pain. Blood concentrations of cobalt (Co), chromium (Cr), and serum cytokines were measured. Subpopulations of leucocytes were analyzed by flow cytometry.

RESULTS

The clinical performance was good. Blood Co levels (ref 1.0 µg/l) were mildly elevated in seven patients at three months, and two patients at two years' follow-up. The preoperative Cr levels were normal except for one patient with a detectable Cr (1.2 µg/l). Cr levels were detectable in three patients at three months, two patients at one year, and three patients at two years' follow-up. No patients had symptoms suggestive of failure. Although flow cytometry showed constant circulating leucocyte profiles, there was a significant reduction of serum interleukin (IL)-4, IL-5, and interferon gamma (IFNγ) postoperatively compared with the preoperative levels (p < 0.05).

CONCLUSION

These results suggest that THA using modular dual-mobility components is safe. This allows an opportunity to use a large femoral head and a thick polyethylene bearing surface, which is especially useful in revision procedures or high-risk situations when added stability is required. Cite this article: Bone Joint J 2019;101-B:1035-1041.