Critically high metal ion levels found in metal-on-metal modular hinged knee arthroplasty : a comparison of two different systems

Taper Junction Subsidence Occurs in Modular Tumor Endoprostheses: How Concerned Should We Be?

BACKGROUND

Advancements in musculoskeletal oncologic treatment have allowed for longer survival of patients with malignant bone tumors and the associated longer use of tumor endoprostheses in those who have had such reconstructions. Several studies have reported on increased serum metal ions with the use of such implants. Modularity in these implants introduces the risk of taper junction corrosion and subsidence resulting in metal wear particle release that may cause an adverse local tissue reaction or systemic toxicity. Additionally, these implants contain a large surface area of cobalt and chromium. It is unclear whether the source of the increased serum ion levels was due to the taper junction corrosion or the implant itself. To our knowledge, no prior study has reported on taper junction subsidence.

QUESTIONS/PURPOSES

In this study we sought (1) to determine survivorship free from radiographic taper junction subsidence in a femoral modular tumor endoprosthesis, and (2) to identify the implant characteristics in the endoprostheses associated with taper subsidence.

METHODS

Between January 1996 and February 2020, the senior author performed 150 proximal or distal femur replacements following resections of soft tissue or bone tumors of the thigh and femur. Of those, 6% (9 of 150) of patients were lost to follow-up before 2 years, 25% (37 of 150) could not be analyzed due to absence of plain radiographs during follow-up, and 13% (20 of 150) died before 2 years follow-up, leaving 56% (84 of 150) for analysis in this retrospective study, with a median time for analysis of 14 years (range 2 to 31 years) after the index resection and endoprosthetic reconstruction for patients with distal femur replacements and 5 years (range 2 to 19 years) for patients with proximal femur replacement. Radiographs involving the entire implant were evaluated for the presence or absence of subsidence of the taper junction that was evident and clear to see if present. The association between the number of taper junctions, the length of resection, the number of collapsed junctions, and the time to collapse from the initial surgery were examined using regression analysis.

RESULTS

Overall, 14% (12 of 84) patients with a distal femur replacement had radiographic collapse of at least one of the modular tapers. Survivorship free from taper subsidence was 91% (95% CI 86% to 96%) at 10 years and 84% (95% CI 78% to 90%) at 20 years. All patients were in the distal femur replacement group. The median follow-up of patients with subsidence was 15 years (range 5 to 26). Fifty-eight percent (7 of 12) of patients had two junctions involved, 25% (3 of 12) had three junctions, and 17% (2 of 12) had one junction involved. All but one patient had subsidence in a single junction. The median time to subsidence was 15 years (range 4.5 to 24.0 years). The subsidence was progressive in all patients who demonstrated it. The taper junction subsidence was complete in 75% (9 of 12) of patients and partial in 25% (3 of 12). Univariate and multivariable regression analyses did not show that the risk factors we studied were associated with subsidence. Two patients with junction subsidence were revised, one for taper fracture and one during busing exchange for distal junction subsidence.

CONCLUSION

Taper damage with late and progressive subsidence of the intervening junction is not uncommon after distal femur replacement. The impact of such a complication is still unknown. Further studies should examine the long-term outcomes and correlate them with metal ion levels.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Enteral N-acetylcysteine to reduce serum cobalt concentrations secondary to prosthetic knee-associated metallosis: A case report

PURPOSE

Cobalt metallosis is a rare but dangerous complication of total joint arthroplasty resulting from deterioration of the joint leading to metal-on-metal friction and breakdown. Potential manifestations vary in severity and include dilated cardiomyopathy, thyroid dysfunction, cognitive disturbances, neuropathy, fatigue, and weakness. The therapeutic role of N-acetylcysteine in metallosis has been investigated due to its ability to chelate with heavy metal ions, such as cobalt and chromium.

SUMMARY

Here we report the case of a 71-year-old female who presented with suspected metallosis diagnosed in the outpatient setting due to symptoms of significant weight loss and failure to thrive. This metallosis was secondary to the hardware breakdown of a left knee revision roughly 6 years previously. The patient was not a surgical candidate due to her poor nutrition status and was started on nasojejunal tube feeds along with N-acetylcysteine 600 mg by mouth twice daily for 45 days. The patient's serum cobalt levels decreased from 61.7 µg/L on admission to 16.2 µg/L prior to her undergoing proper revision of the left knee roughly 2 months after admission to the hospital. The patient tolerated treatment well and was able to be discharged the day after surgery, with no further complaints or complications.

CONCLUSION

This case report contributes to the body of literature suggesting that administration of N-acetylcysteine can reduce serum cobalt concentrations, without notable adverse effects, in the context of prosthetic knee-associated metallosis.

Can the Current Thresholds for Synovial Cell Count and Neutrophil Percentage to Diagnose Prosthetic Joint Infection be Applied to Metal-on-Metal Rotating Hinge Total Knee Arthroplasty?

BACKGROUND

Synovial leukocyte count analysis is an important tool in the diagnosis of PJI. However, results can be poor if metallosis is present. The issue of metallosis was established for some rotating hinge knee arthroplasty designs.

METHODS

This was a retrospective single-center analysis that included 108 patients who had a single-design metal-on-metal rotating hinge knee arthroplasty who underwent revision surgery and had prior synovial fluid analysis performed. The diagnostic accuracy of leukocyte count and the percentage of polymorphonuclear neutrophiles (% PMN) were investigated.

RESULTS

Patients who had a PJI had a higher median leukocyte count and % PMN compared to aseptic revisions (7,905/μL (interquartile range (IQR) 2,419 to 37,400) and 85% (IQR 70.3 to 93.8) versus 450 (IQR 167 to 1,215) and 46% (IQR 28.5 to 67.4%), P < .001). The respective areas under the curves were 0.916 (95% confidence interval 0.862 to 0.970) for leukocyte count and 0.821 (95% confidence interval 0.739 to 0.902) for % PMN. We calculated an optimal cut-off value of 1,200 leukocytes/μL (Sensitivity 94.5%/specificity 75.5%) and 63% PMN (Sensitivity 85.5%/specificity 73.6%) to define PJI. Established thresholds were less sensitive, but more specific. The "infection likely" scenario of the European Bone and Joint Infection Society (EBJIS) definition was closest to the calculated thresholds.

CONCLUSION

Currently used thresholds for leukocyte cell count and %PMN to define PJI were less sensitive and specific in the diagnosis of PJI in metal-on-metal RHK knees. Surgeons must consider lower cut-off values when evaluating such implants for PJI.

Concentrations of Cobalt, Chromium and Titanium and Immunological Changes after Primary Total Knee Arthroplasty-A Cohort Study with an 18-Year Follow-Up

Background: Total knee arthroplasty (TKA) generates elevated metal ion concentrations, but long-term changes in the concentrations of cobalt (Co), chromium (Cr) and titanium (Ti) after primary TKA and potential subsequent immune system activation-not limited to the joint but systemically-are not known. Patients and Methods: We conducted a cohort study on 26 patients with TKA (19 women; 16 with metal-backed and 10 with all-polyethylene tibial components) 18.3 years (min. 16.7, max. 20.5) after index TKA. A total of 69% of patients additionally underwent subsequent arthroplasty of the contralateral knee or either hip after the index surgery. Blood samples were analysed by inductively coupled plasma-mass spectrometry, and leukocytes were characterised by flow cytometry. Patients were clinically assessed using the Knee Society score and by plain radiography of the knee. Results: The median metal ion concentrations were 0.7 (0.1-13.0) µg/L for Co, 0.9 (0.4-5.0) µg/L for Cr, and 1.0 (0.2-13.0) µg/L for Ti. There was no relevant difference in systemic metal ion concentrations between patients exposed to single and multiple arthroplasties. The absolute count and proportion of CD3+CD4+CD8+ T cells was inversely correlated with both Co (rho -0.55, p = 0.003) and Cr concentrations (rho -0.59, p = 0.001). Conclusions: Between the first and second decades after primary TKA, in most patients, the concentrations of Co, Cr and Ti in blood samples were below the thresholds that are considered alarming. The negative correlation of Co and Cr concentrations with a subset of lymphocytes that commonly increases during immune activation is reassuring. This represents a worst-case scenario, underscoring that the investigated metal ions remain within reasonable ranges, even after additional hardware exposure.

Ceramic Coatings Confer No Survivorship Advantages in Total Knee Arthroplasty-A Single-Center Series of 1641 Knees

Background

Ceramic coatings in total knee arthroplasty have been introduced with the aim of reducing wear and consequently improving implant survivorship. We studied both cobalt-chrome-molybdenum (CoCrMo) and ceramic-coated components of the same implant design from a single center to identify if the ceramic coating conferred any benefit.

Methods

We identified 1641 Columbus total knee arthroplasties (Aesculap AG, Tüttlingen, Germany) from a prospectively collected arthroplasty database. Of the 1641, 983 were traditional CoCrMo, and 659 had the Columbus AS ceramic coating. Patients were followed up until death or revision of any component of the implant.

Results

There was no significant difference in implant survivorship using any component revision as the endpoint between the CoCrMo femur and the ceramic-coated femur at a mean of 9.2 years in follow-up for the CoCrMo group and 5 years for the ceramic-coated group (37 vs 14; P = .76). There was no reduction in the proportion of components revised for aseptic loosening or infection in the ceramic-coated cohort.

Conclusions

At midterm follow-up, there was no benefit in terms of implant survivorship in using a ceramic coating.