Metal-on-polyethylene versus metal-on-metal bearing surfaces in total hip arthroplasty

Prosthetic Metals: Release, Metabolism and Toxicity

The development of metallic joint prostheses has been ongoing for more than a century alongside advancements in hip and knee arthroplasty. Among the materials utilized, the Cobalt-Chromium-Molybdenum (Co-Cr-Mo) and Titanium-Aluminum-Vanadium (Ti-Al-V) alloys are predominant in joint prosthesis construction, predominantly due to their commendable biocompatibility, mechanical strength, and corrosion resistance. Nonetheless, over time, the physical wear, electrochemical corrosion, and inflammation induced by these alloys that occur post-implantation can cause the release of various metallic components. The released metals can then flow and metabolize in vivo, subsequently causing potential local or systemic harm. This review first details joint prosthesis development and acknowledges the release of prosthetic metals. Second, we outline the metallic concentration, biodistribution, and elimination pathways of the released prosthetic metals. Lastly, we discuss the possible organ, cellular, critical biomolecules, and significant signaling pathway toxicities and adverse effects that arise from exposure to these metals.

Comprehensive Review on Biomaterials and Their Inherent Behaviors for Hip Repair Applications

Developing biomaterials for hip prostheses is challenging and requires dedicated attention from researchers. Hip replacement is an inevitable and remarkable orthopedic therapy for enhancing the quality of patient life for those who have arthritis as well as trauma. Generally, five types of hip replacement procedures are successfully performed in the current medical market: total hip replacements, hip resurfacing, hemiarthroplasty, bipolar, and dual mobility systems. The average life span of artificial hip joints is about 15 years, and several studies have been conducted over the last 60 years to improve the performance and thereby increase the lifespan of artificial hip joints. Present-day prosthetic hip joints are linked to the wide availability of biomaterials. Metals, ceramics, and polymers are some of the most promising types of biomaterials; nevertheless, each biomaterial has advantages and disadvantages. Metals and ceramics fail in most applications owing to stress shielding and the emission of wear debris; ongoing research is being carried out to find a remedy to these unfavorable responses. Recent research found that polymers and composites based on polymers are significant alternative materials for artificial joints. With growing research and several biomaterials, recent reviews lag in effectively addressing hip implant materials' individual mechanical, tribological, and physiological behaviors. This Review comprehensively investigates the historical evolution of artificial hip replacement procedures and related biomaterials' mechanical, tribological, and biological characteristics. In addition, the most recent advances are also discussed to stimulate and guide future researchers as they seek more effective methods and synthesis of innovative biomaterials for hip arthroplasty application.

Titanium nitride coating of pectus bar increases metal contamination after minimally-invasive repair of pectus excavatum

INTRODUCTION

Previous studies demonstrated a release of toxic metals, e.g. nickel and chromium, from stainless steel bars used for minimally invasive repair of pectus excavatum (MIRPE). In the present study, we investigated the impact of titanium nitride coating on the metal release and exposure of MIRPE patients.

MATERIAL AND METHODS

We analyzed the courses of nickel and chromium levels in blood, urine and local tissue in patients undergoing MIRPE with a titanium nitride coated pectus bar between 03/2017 and 10/2018. Sample collection was scheduled prior to MIRPE, at defined postoperative time points and at bar removal. Additionally, we evaluated irritative symptoms. Results were compared to a control group who received uncoated stainless steel bars in a previous time period (03/2015-02/2017).

RESULTS

12 patients received coated pectus bars (mean age 15.7 years). The control group included 28 patients. After implantation of a titanium nitride coated bar, significant increase in systemic nickel and chromium levels after one, two and three years was noted. In an interim analysis one year after MIRPE, we observed patients with coated bars to have significantly elevated trace metal values compared to the control group. This elevation persisted throughout the observation period. Tissue metal values were also significantly increased. Irritative symptoms occurred significantly more often in study patients compared to controls (50.0% vs. 14.3%).

CONCLUSIONS

Coating of pectus bars with titanium nitride failed to reduce metal contamination after MIRPE. Instead, it resulted in a significant increase of trace metal levels after MIRPE, compared to patients with stainless steel bars, which may be explained by wear of the coating and inter-component mobilization processes.

Serum cobalt and chromium concentration following total hip arthroplasty: a Bayesian network meta-analysis

The present systematic review investigated the concentration of chromium (Cr) and cobalt (Co) in serum in patients who have undergone total hip arthroplasty (THA). The first outcome of interest was to investigate the mean concentration in serum of Cr and Co using different material combinations and to verify whether their concentrations change significantly using different patterns of head and liner in THA. The second outcome of interest was to investigate whether the time elapsed from the index surgery to the follow-up, BMI, sex, and side exert an influence on the mean concentration of Cr and Co in serum in patients who have undergone THA. The following material combinations were investigated (head-liner): Ceramic-Co Cr (CoCr), CoCr-CoCr, CoCr-Polyethylene, CoCr high carbide-CoCr high carbide. Data from 2756 procedures were retrieved. The mean length of follow-up was 69.3 ± 47.7 months. The ANOVA test evidenced good comparability in age, length of follow-up, BMI, and sex (P > 0.1). In patients who have undergone THA, the mean concentration in the serum of Co ranged between 0.5 µg/L and 3.5 µg/L, and the mean concentration of Cr from 0.6 to 2.6 µg/L. The difference in the concentration of Co and Cr in serum is strictly related to the implant configuration, with the coupling CoCr-CoCr showing the highest and CoCr-Polyethylene showing the lowest concentration. Patient characteristics, BMI, sex, side and the time elapsed from the index surgery to the last follow-up did not exert a significant influence on the concentration of Co and Cr in serum in patients who have undergone total hip arthroplasty (THA).

Intractable Bleeding After Revision Hip Arthroplasty Because of Angiosarcoma: A Report of 2 Cases

CASE

Two cases of revision total hip arthroplasty (THA) for pseudotumor and infection with persistent postoperative bleeding because of angiosarcoma are presented. After surgery, both patients' health deteriorated because of hypovolemic shock despite transfusion, pressors, embolization, and prothrombotics. Diagnosis was obscure and delayed despite extensive imaging. Standard and computed tomography angiogram were nondiagnostic and did not localize the tumors or bleeding. Repeat surgeries and biopsies requiring special staining ultimately revealed epithelioid angiosarcoma.

CONCLUSION

A diagnosis of angiosarcoma was etiologic for persistent postoperative bleeding after revision THA and should be considered in such cases.

Comparisons of Different Bearing Surfaces in Cementless Total Hip Arthroplasty: A Systematic Review and Bayesian Network Analysis

BACKGROUND

We aimed to make comparisons of different bearing surfaces in patients after cementless total hip arthroplasty.

METHODS

The network meta-analysis was guided by the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guideline. The primary outcomes were implant survival and Harris hip score (HHS). Secondary outcomes included linear wear rates and serum level of metal ions. Subgroup analyses were performed by: (1) classifying head sizes as small and large; (2) femoral heads as ceramic and metal; and (3) liners as metal, ceramic, polyethylene, highly cross-linked polyethylene (HXP), or vitamin E-infused highly cross-linked polyethylene (HXPE). A total of 64 eligible RCTs with different bearings were assessed. Overall inconsistency and heterogeneity were acceptable.

RESULTS

In the 10 years follow-up, metal-on-polythene and ceramic-on-polythene bearings with small heads showed higher risk for revisions compared with metal-on-HXP and ceramic-on-HXP bearings with small heads. Similarly, only metal or ceramic-on-polythene bearings with small heads showed inferiority in HHS compared with other bearings. Conventional polyethylene liners showed higher linear wear rates compared with HXP, HXPE, and ceramic liners at 5 and 10 years after surgery, while metal-on-metal and ceramic-on-metal bearings showed higher serum level of cobalt and chromium.

CONCLUSION

Bearings containing HXP, HXPE, and ceramic liners showed comparable survivorship and hip function at follow-up of 5 and 10 years. Hard-on-hard bearings containing metal had higher serum level of metal ions than others. Bearings containing conventional polyethylene had worse performance in terms of implant survival, hip function, and wear rates.

LEVEL OF EVIDENCE

Level I.

Nickel contamination after minimally-invasive repair of pectus excavatum persists after bar removal

BACKGROUND

Minimally-invasive repair of pectus excavatum (MIRPE) has been shown to be associated with high release of trace metals into patient's body. The aim of our study was to analyze the kinetics of metal contamination after MIRPE and after bar removal.

METHODS

We prospectively assessed nickel and chromium changes in blood, urine, and local tissue in patients undergoing MIRPE with stainless-steel bar(s). Baseline samples were taken prior to surgery, further samples were taken at six defined time points until 30 months after bar removal. Clinical symptoms were evaluated at the time of every sample collection.

RESULTS

28 patients were included (mean age 16.4 years). At four weeks after MIRPE and persisting up to bar removal, we found significantly elevated trace metal levels in blood and urine. Tissue nickel and chromium levels were significantly elevated at the time of bar removal. After bar removal, the concentration of trace metal in urine and the concentration of chromium in plasma decreased gradually. In contrast, nickel levels in blood further increased. Five patients showed irritative symptoms after MIRPE, all symptomatic patients had elevated metal levels.

CONCLUSIONS

Following MIRPE, we found a rapid systemic increase of nickel and chromium. Our data indicate that trace metal release could cause irritative symptoms. The prolonged elevated systemic nickel levels beyond bar removal necessitate further investigations of the long-term side effects of MIRPE.

Psychiatric Disorders and Genotoxicity Following Primary Metal on Polyethylene Total Hip Arthroplasty and Their Correlation to Cobalt/Chromium Levels

Introduction

Hip arthroplasty (HA) using implantable metal components is among the commonest orthopedic interventions. However, it can be followed by several complications following corrosion and the release of metal ions. Several studies proved that damaged genomic DNA may contribute to the pathophysiology of mental disorders.

Aim

The current work aims to evaluate the psychiatric disorders in metal on polyethylene hip arthroplasty (MOP-HA) patients and its correlation to cobalt/chromium (Co/Cr) levels and genotoxicity.

Methods

The work was a longitudinal follow-up study including 34 adults with unilateral primary MOP-HA meeting the inclusion and exclusion criteria. Preoperatively, 6, 12-months-postoperatively, patients were examined for cognitive impairment using mini-mental-state-examination (MMSE), depression using major-depressive-inventory (MDI), and blood samples were collected for estimation of Co/Cr, detection of genotoxicity by single-cell-gel-electrophoresis (comet assay) and serum 8-hydroxy-2'-deoxyguanosine (8-OHdG).

Results

Cognitive impairment was reported in 18.5% and 14.8% at 6-months, and 12-months postoperative, respectively. Depressive disorder was recorded in 22.2% at 6-months and 14.8% at 12-months postoperative. The marginal homogeneity tests proved a non-significant difference. There was a non-significant difference in preoperative, 6-months, 12-months postoperative MMSE, and MDI scores. There were significantly increased Co/Cr levels at 6-months postoperative. The levels decreased at 12-months postoperative, however, still significantly higher than preoperative values. There was a significant increase in serum 8-OHdG and the levels were positively correlated to cobalt levels at both 6 and 12-months-postoperative. There was a non-significant difference among preoperative, 6-months, and 12-months postoperative comet assay measurements.

Conclusion

From previous findings, we can conclude that will-functioning MOP hip arthroplasty can induce increased ion levels and positively correlated increase in biochemical markers of genotoxicity (8-OHdG).

The role of metal ions in the behavior of bovine serum albumin molecules under physiological environment

Metal ions released from metallic implants can affect the conformation and structural stability of proteins in biological fluids, which eventually affects the biocompatibility of implants. The present study aimed at understanding the interactions between the metal ions (Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Cu²⁺, and Zn²⁺) and bovine serum albumin (BSA) molecules in physiological context. The structural information of BSA molecules and the microenvironment of functional groups were investigated using UV, Raman, and circular dichroism spectroscopy. The results revealed that addition of Fe³⁺, Fe²⁺, and Cu²⁺ ions alters the tertiary structure of BSA molecules and exposes the aromatic heterocyclic hydrophobic group of BSA amino acid residues. The addition of Fe³⁺ and Cu²⁺ ions results in increased viscosity and decreased intensity of the water peak in the BSA solution. Furthermore, Fe³⁺ and Cu²⁺ ions evidently promote the α-helix to β-sheet transformation of BSA molecules due to decreased disulfide bond stability. Tryptophan residues of BSA and metal ions containing BSA (Me⁺/BSA) solutions were found to be in a hydrophilic environment. Moreover, the addition of metal ions to BSA results in several of tyrosine residues acting as hydrogen-bond donors. Coomassie brilliant blue staining revealed that the addition of Cu²⁺ ions promotes the aggregation of BSA molecules. The findings of this study will be helpful for evaluating the biocompatibility of metallic implants.

Metal-on-metal versus metal-on-plastic artificial discs in two-level anterior cervical disc replacement: a meta-analysis with follow-up of 5 years or more

BACKGROUND CONTEXT

Although highlighted in joint arthroplasty studies, long-term outcomes between differing biomaterial composites, such as metal-on-metal (MoM) and metal-on-plastic (MoP) in anterior cervical disc replacement (ACDR) have not been thoroughly investigated.

PURPOSE

The purpose of this study was to evaluate the patient-reported clinical outcomes, overall reoperation rates, complications, and rates of ASD of MoM versus MoP artificial discs in two-level ACDR for the treatment of cervical DDD.

STUDY DESIGN/SETTING

Meta-analysis and systematic review.

PATIENT SAMPLE

Nine hundred eighty patients (442 MoM, 538 MoP) across seven studies.

OUTCOME MEASURES

Patient reported clinical outcomes (NDI, VAS-n, VAS-a), overall reoperation rates, complications, and rates of ASD.

METHODS

A systematic search strategy of three electronic databases (PubMed, CINAHL Plus, and SCOPUS) was conducted utilizing terms related to two-level ACDR. All studies included had a sample size of >10 patients, had a minimum 5-year follow-up, and reported data on adjacent segment disease. Cadaver studies, non-English manuscripts, articles with less than 5-year follow-up and studies in which only single-level ACDR was investigated were excluded. A total of seven studies were included in this analysis. Studies were analyzed for demographic data, clinical outcome scores (NDI, VAS-neck, and VAS-arm), overall reoperation rates, complications, and rates of ASD. A random-effects model of meta-analysis was used for groups that were determined to be heterogenous and a fixed-effects model was utilized for groups that were not. An overlap of 95% confidence intervals suggests no statistically significant difference at the p<.05 level.

RESULTS

Seven studies were included with data on 980 patients (442 MoM, 538 MoP). The study population was 52.84% female, with a mean age of 48.01 years, and a mean follow-up of 85.66 months. The mean improvement in NDI was 34.42 (95% CI, 32.49-36.36) and 29.72 (95% CI, 27.15-32.29) for the MoM and MoP groups, respectively. The mean improvement in VAS-neck was 11.20 (95% CI, 10.69-11.70) and 8.78 (95% CI, 7.81-9.74) for the MoM and MoP groups, respectively. The mean improvement in VAS-arm was 10.73 (95% CI, 9.83-11.63) and 8.49 (95% CI, 7.59-9.39) for the MoM and MoP groups, respectively. 3.85% (95% CI, 2.40-6.10) of patients who underwent ACDR with a MoM implant required reoperation compared to 5.33% (95% CI, 3.68-7.65) of patients with a MoP implant. Heterotopic ossification and dysphagia were the most common complications in both groups. The MoM cohort showed a higher incidence of HO (72.62% vs. 21.07%), but a lower incidence of dysphagia (0.96% vs. 16.31%) compared to the MoP cohort. The MoM cohort had a larger proportion of patients with ASD who underwent subsequent surgery at an adjacent level (7.89% MoM versus 1.91% MoP).

CONCLUSIONS

Our present meta-analysis suggests that the use of MoM artificial discs in two-level ACDR results in superior clinical outcome score improvement, but higher rates of ASD requiring secondary surgery compared to MoP discs after a follow-up period of 5 years or more.

No association between blood count levels and whole-blood cobalt and chromium levels in 1,900 patients with metal-on-metal hip arthroplasty

Background and purpose - The accelerated wear of poorly functioning metal-on-metal (MoM) hip implants may cause elevated whole-blood cobalt (Co) and chromium (Cr) levels. Hematological and endocrinological changes have been described as the most sensitive adverse effects due to Co exposure. We studied whether there is an association between whole-blood Co/Cr levels and leukocyte, hemoglobin, or platelet levels. Patients and methods - We analyzed whole-blood Co and Cr values and complete blood counts (including leukocytes, hemoglobin, platelets) from 1,900 patients with MoM hips. The mean age at the time of whole-blood metal ion measurements was 67 years (SD 10). The mean time from primary surgery to whole-blood metal ion measurement was 8.2 years (SD 3.0). The mean interval between postoperative blood counts and metal ion measurements was 0.2 months (SD 2.7). Results - The median Co value was 1.9 µg/L (0.2-225), Cr 1.6 µg/L (0.2-125), mean leukocyte count 6.7 × 10⁹/L (SD 1.9), hemoglobin value 143 g/L (SD 13), and platelet count 277 × 10⁹/L (SD 70). We did not observe clinically significant correlations between whole-blood Co/Cr and leukocyte, hemoglobin, or platelet counts. Interpretation - Elevated whole-blood Co and Cr values are unlikely to explain abnormal blood counts in patients with MoM hips and the reason for possible abnormal blood counts should be sought elsewhere.

Metal Ion Release, Clinical and Radiological Outcomes in Large Diameter Metal-on-Metal Total Hip Arthroplasty at Long-Term Follow-Up

Total hip arthroplasty (THA) with metal-on-metal (MoM) bearings have shown problems of biocompatibility linked to metal ion release at the local level causing an adverse reaction to metal debris (ARMD) and at a systemic level. The aim of this study was to evaluate clinical and radiological outcomes, and metal ion concentrations in the blood and urine of patients who underwent THA with the LIMA Met-Met hip system. Patients with ceramic-on-ceramic (CoC) bearings were included as a control group. In this study, 68 patients were enrolled: 34 with MoM THAs and 34 with CoC THAs. Patients were evaluated clinically (Harris Hip Score, SF-36) and radiologically at a median of 7.4 years after surgery. Whole blood and urinary cobalt and chromium levels were also assessed. Both types of implants were comparable in terms of clinical and functional results. Ion levels were significantly higher in the MoM group compared with CoC group 7 years after surgery. No correlations were found between metal ion levels and patient demographics, functional and radiological outcomes, and prosthesis features. Patient monitoring is thus advised to establish if prosthesis revision is necessary, especially in the case of MoM THA.

MARS MRI Characteristics of Adverse Local Tissue Reactions in Taper Corrosion of Metal-On-Polyethylene THA Differ From Metal-On-Metal THA

BACKGROUND

Metal artifact reduction sequence (MARS) magnetic resonance imaging (MRI) has been recommended as a cross-sectional imaging modality in clinical evaluation of adverse local tissue reactions (ALTRs) in metal-on-metal (MoM) patients and metal-on-polyethylene (MoP) patients with taper corrosion. The aim of the study was to compare MARS MRI characteristics of ALTR in MoM total hip arthroplasty (THA) with ALTR in MoP THA with modular taper corrosion.

METHODS

A total of 197 patients with ALTR were evaluated: 86 patients with MoM THA; 37 MoP patients with head-neck taper corrosion; and 74 MoP patients with neck-stem dual taper corrosion. MARS MRI scans were evaluated to identify location, size, type of ALTR (I-III), and associated ALTR synovitis (cystic, solid, and mixed).

RESULTS

MARS MRI characteristics of ALTR were significantly different between the MoM and MoP groups (P = .017). The MoP group demonstrated the highest proportion of thick-walled cystic masses type II (56.7% in head-neck taper corrosion MoP and 46.5% in dual taper corrosion MoP vs 28.7% in MoM), whereas the MoM group had the highest proportion of thin-walled cystic masses type I. MoM implants (96.8%) were significantly more likely to have ALTR in multiple locations compared with both MoP groups (P = .001).

CONCLUSION

This study demonstrates that MARS MRI characteristics of ALTR differ by bearing type with a significantly higher percentage of mixed type and solid type ALTR in the taper corrosion MoP THA compared with MoM THA. This information provides clinically useful information in evaluation of symptomatic MoP and MoM THA patients for ALTRs.

Genotoxic properties of materials used for endoprostheses: Experimental and human data

Approximately 2 million endoprostheses are implanted annually and metal ions as well as particles are released into the body from the materials which are used. This review describes the results of studies concerning genotoxic damage caused by artificial joints. DNA damage leads to various adverse long-term health effects in humans including cancer. Experiments with mammalian cells showed that metal ions and particles from orthopedic materials cause DNA damage. Induction of chromosomal aberrations (CA) was found in several in vitro experiments and in studies with rodents with metals from orthopedic materials. Human studies focused mainly on induction of CA (7 studies). Only few investigations (4) concerned sister chromatid exchanges, oxidative DNA damage (2) and micronucleus formation (1). CA are a reliable biomarker for increased cancer risks in humans) and were increased in all studies in patients with artificial joints. No firm conclusion can be drawn at present if the effects in humans are due to oxidative stress and if dissolved metal ions or release particles play a role. Our findings indicate that patients with artificial joints may have increased cancer risks due to damage of the genetic material. Future studies should be performed to identify safe materials and to study the molecular mechanisms in detail.

In vivo blood metal ion levels in patients after total shoulder arthroplasty

BACKGROUND

Products from metal wear have been identified as a potential cause of adverse local tissue reactions and implant failure in total hip arthroplasty. However, the role of metal ion exposure in patients after total shoulder replacement is unclear. The objective of the present study was to determine in vivo blood metal ion levels of cobalt, chromium, and titanium in patients after anatomic total shoulder arthroplasty (TSA) or reverse TSA.

METHODS

A consecutive series of patients after anatomic TSA or reverse TSA was evaluated retrospectively. After exclusion of patients with additional metal implants, 40 patients with unilateral anatomic TSA (n = 20) or reverse TSA (n = 20) were available for whole-blood metal ion analysis at a mean follow-up of 28 ± 9.6 months. Twenty-three healthy individuals without metal implants served as a control group.

RESULTS

Mean cobalt ion concentrations were 0.18 µg/L (range, 0.1-0.66 µg/L), 0.15 µg/L (range, 0.03-0.48 µg/L), and 0.11 µg/L (range, 0.03-0.19 µg/L), mean chromium ion levels were 0.48 µg/L (range, 0.17-2.41 µg/L), 0.31 µg/L (range, 0.09-1.26 µg/L), and 0.14 µg/L (range, 0.04-0.99 µg/L), and mean titanium ion concentrations were 1.31 µg/L (range, 0.75-4.52 µg/L), 0.84 µg/L (range, 0.1-1.64 µg/L), and 0.62 µg/L (range, 0.32-2.14 µg/L) in the reverse TSA group, the anatomic TSA group, and the control group, respectively.

CONCLUSIONS

TSA resulted in elevated metal ion levels compared with healthy controls, although overall metal ion concentrations measured in this study were relatively low. The role of local metal ion exposure in patients with total shoulder replacements should be further investigated.

Comparative Mid-term Follow-up Study of Primary Total Hip Arthroplasty with Metal-on-metal and Metal-on-polyethylene Bearings

OBJECTIVE

To compare mid-term clinical results of total hip arthroplasty (THA) with metal-on-metal (MoM) and metal-on-polyethylene (MoP) bearings and to evaluate the biological safety of the two kinds of prostheses.

METHODS

Thirty-two patients who received a primary THA with an MoM articulation between January 2008 and December 2010 were selected to form the MoM group retrospectively. The MoP group consisted of 32 patients who received a THA with an MoP prosthesis during the same period. Clinical assessments, imaging examinations, laboratory tests, and metal ion concentration detections were conducted on each patient. Another 32 healthy volunteers were recruited as the control group.

RESULTS

Twenty-seven patients in the MoM group and 28 patients in the MoP group completed the follow-up, with a mean follow-up time of 74.6 and 75.9 months, respectively. The mean Harris score at the latest follow-up was 91.5 ± 5.1 in the MoM group versus 88.9 ± 4.0 in the MoP group (P = 0.22). The MoM group showed a better range of motion in flexion, abduction, and external rotation. Co and Cr levels in the MoM group were 2.5-fold and 2.0-fold of these in the MoP group. A mild change of liver function was observed in both groups, while the values of renal function and humoral immunity stayed static. Elevated proportions of Th1 and Th17 cells and decreased proportion of Th2 cells were observed in the MoM group. The occurrence rate of pseudotumors in the MoM and MoP groups was 40.74% ± 9.45% and 14.28% ± 6.61%, respectively (P < 0.05).

CONCLUSION

At the mid-term follow-up, clinical results were satisfied in both groups. MoM prosthesis could result in elevated serum metal ion levels and there is a higher risk of pseudotumor. Long follow-up is needed to evaluate the safety of MoM prostheses.

A novel ceramic coating for reduced metal ion release in metal-on-metal hip surgery

An ovine total hip arthroplasty model was developed to evaluate metal ion release, wear, the biological response and adverse tissue reaction to metal-on-metal (MoM) bearing materials. The performance of an advanced superlattice ceramic coating (SLC) was evaluated as a bearing surface and experimental groups divided into; (1) MoM articulating surfaces coated with a SLC coating (SLC-MoM), (2) uncoated MoM surfaces (MoM), and (3) metal on polyethylene (MoP) surfaces. Implants remained in vivo for 13 months and blood chromium (Cr) and cobalt (Co) metal ion levels were measured pre and postoperatively. Synovial tissue was graded using an ALVAL scoring system. When compared with the MoM group, sheep with SLC-MoM implants showed significantly lower levels of chromium and cobalt metal ions within blood over the 13-month period. Evidence of gray tissue staining was observed in the synovium of implants in the MOM group. A significantly lower ALVAL score was measured in the SLC-MoM group (3.88) when compared with MoM components (6.67) (p = 0.010). ALVAL results showed no significant difference when SLC-MOM components were compared to MoP (5.25). This model was able to distinguish wear and the effect of released debris between different bearing combinations and demonstrated the effect of a SLC coating when applied onto the bearing surface. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1760-1771, 2019.

Biological effects of metal degradation in hip arthroplasties

Metals and metal alloys are the most used materials in orthopedic implants. The focus is on total hip arthroplasty (THA) that, though well tolerated, may be associated with local and remote adverse effects in the medium-long term. This review aims to summarize data on the biological consequences of the metal implant degradation that have been attributed predominantly to metal-on-metal (MoM) THA. Local responses to metals consist of a broad clinical spectrum ranging from small asymptomatic tissue lesions to severe destruction of bone and soft tissues, which are designated as metallosis, adverse reactions to metal debris (ARMD), aseptic lymphocytic vasculitis associated lesion (ALVAL), and pseudotumors. In addition, the dissemination of metal particles and ions throughout the body has been associated with systemic adverse effects, including organ toxicity, cancerogenesis, teratogenicity, and immunotoxicity. As proved by the multitude of studies in this field, metal degradation may increase safety issues associated with THA, especially with MoM hip systems. Data collection regarding local, systemic and long-term effects plays an essential role to better define any safety risks and to generate scientifically based recommendations.

High blood metal ion levels in 19 of 22 patients with metal-on-metal hinge knee replacements

Background and purpose - There has been increasing alarm regarding metal-on-metal (MoM) joint replacements leading to elevated levels of metal ions and adverse reactions to metal debris (ARMDs). There is little information available concerning the prevalence of and risk factors for these adverse reactions, except with MoM hip joint replacements. We determined the levels of metal ions in blood and the rate of revision due to ARMDs in patients treated with MoM hinge total knee arthroplasty (TKA). Patients and methods - 22 patients with TKAs and MoM hinge connecting mechanisms were studied for whole-blood chromium and cobalt levels at 6 months, 1 year, and/or ≥2 years after surgery. Possible ARMDs were investigated by MRI. 12 patients with TKAs and metal-on-polyethylene (MoP) connecting mechanisms served as controls. Results - The cobalt levels were over 5 ppb in 19 of the 22 patients in the MoM group and in 1 of the 12 patients in the MoP group. The chromium levels were over 5 ppb in 11 of the 22 patients in the MoM group and in none of the 12 patients in the MoP group. Pseudotumors were operated in 4 of the 22 patients in the MoM group and in none of the patients in the MoP group. Interpretation - Our results clearly show that the MoM hinge TKA carries a high risk of increased levels of systemic metal ions and also local ARMD, leading to complicated knee revisions. We therefore discourage the use of MoM hinge TKA.

Metal ion levels in ceramic-on-ceramic THR with cobalt-chrome modular necks: analysis of cobalt and chromium serum levels in 23 healthy hip patients

BACKGROUND

Modular necks in total hip replacement (THR) can be a source of metal ion release.

METHODS

We measured the level of cobalt (Co) and chromium (Cr) ions in the serum of 23 healthy volunteers with a well-functioning ceramic-on-ceramic THR of a particular design, containing a cobalt-chrome (Co-Cr) stem and a Co-Cr modular neck.

RESULTS

Average Co in serum was 1,71 µg/l; median Co was 1.50 µg/l. No patient had Co levels higher than 3.70 µg/l. Average Cr level was 0.49 µg/l; in all but one patient Cr was below the detection limit (<0.50 µg/l). Co was higher for varus necks compared to all other subtypes: 2.14 µg/l vs 1.58 µg/l (p<0.05). The same system with Titanium modular necks shows lower Co serum levels: 1.26 µg/l (p<0.01 ). In conclusion, the hybrid THR Profemur Xm® - Procotyle L® with a Co-Cr modular neck on a Co-Cr stem design shows very low Cr ion serum levels in a randomly selected group of well-functioning hip patients.

CONCLUSIONS

Co ion serum levels are low, but significantly higher for 8° varus necks, and Co levels are significantly higher than values of this system with a Titanium modular neck.

Gross Trunnion Failure of a Cobalt-Chromium Femoral Head on a Titanium Stem at Midterm Follow-up: A Report of 3 Cases

CASE

Three patients underwent uncomplicated primary total hip arthroplasty with cobalt-chromium femoral heads (36+5 mm) on titanium V40 tapers. At 6 to 9 years of follow-up, severe effects of corrosion at the trunnion were noted in all 3 patients, along with elevated levels of serum cobalt ions and normal levels of serum chromium ions. Gross trunnion failure, apparently caused by corrosion, required femoral stem revision in all of the patients.

CONCLUSION

Decreased neck diameter, longer trunnion length, and large-sized cobalt-chromium heads are possible contributors to early failure after primary total hip arthroplasty due to trunnionosis. Surgeons should be mindful of trunnionosis as a cause of pain and a mechanism of failure following total hip arthroplasty, and serum metal ions should be monitored in these patients.

Increased Mortality in Metal-on-Metal versus Non-Metal-on-Metal Primary Total Hip Arthroplasty at 10 Years and Longer Follow-Up: A Systematic Review and Meta-Analysis

IMPORTANCE

There are concerns about increased mortality in patients with metal-on-metal bearings in total hip arthroplasty (THA).

OBJECTIVE

To determine the mortality and the morbidity in patients with metal-on-metal articulations (MOM THA) compared to patients with non-metal-on-metal articulations (non-MOM THA) after primary total hip arthroplasty.

DATA SOURCES

Search of PubMed, MEDLINE, EMBASE, Web of Science, Cochrane, CINAHL, AcademicSearchPremier, ScienceDirect, Wiley and clinical trial registers through March 2015, augmented by a hand search of references from the included articles. No language restrictions were applied.

STUDY SELECTION

Two reviewers screened and identified randomised controlled trials and observational studies of primary total hip arthroplasty comparing MOM THA with non-MOM THA.

DATA EXTRACTION AND SYNTHESIS

Two reviewers independently extracted study data and assessed risk of bias. Risk differences (RD) were calculated with random effect models. Meta-regression was used to explore modifying factors.

MAIN OUTCOMES AND MEASURES

Difference in mortality and difference in morbidity expressed as revisions and medical complications between patients with MOM THA and non-MOM THA.

RESULTS

Forty-seven studies were included, comprising 4,000 THA in randomised trials and over 500,000 THA in observational studies. For mortality, random effects analysis revealed a higher pooled RD of 0.7%, 95%, confidence interval (CI) [0.0%, 2.3%], I-square 42%; the heterogeneity was explained by differences in follow-up. When restricted to studies with long term follow-up (i.e. 10 years or more), the RD for mortality was 8.5%, 95%, CI [5.8%, 11.2%]; number needed to treat was 12. Further subgroup analyses and meta-regression random effects models revealed no evidence for other moderator variables (study level covariates, e.g. resurfacing vs. non-resurfacing MOM) than follow-up duration. The quality of the evidence presented in this meta-analysis was characterized as moderate according to the CLEAR-NPT (for non-pharmacological trials) and Cochrane risk of bias Table.

CONCLUSIONS AND RELEVANCE

Meta-analysis suggests there may be an increased long-term risk of mortality and revision surgery for patients with MOM THA compared to patients with non-MOM THA.

REGISTRATION

PROSPERO 2014:CRD42014007417.