Treatment of chronic orthopaedic infection

Local Administration of Antibiotics in Orthopedics and Traumatology

2022 marks the 50th anniversary of the development of the antibiotic loaded PMMA chain. The loading of bone cements with antibiotics was a major advance in the treatment of musculoskeletal infections and is still a proven standard today. The research and use of novel antibiotic carriers continues to be an important part of research in the context of musculoskeletal infections. The article provides an overview of the various local antibiotics available and their specifics. In addition, current adapted treatment concepts are discussed.

Impact of preoperative urinary tract infection on postoperative outcomes following total shoulder arthroplasty for osteoarthritis

Introduction

As the utilization of total shoulder arthroplasty (TSA) increases, it is essential to identify risk factors associated with postoperative complications. Urinary tract infection (UTI) is one such example. Our objective is to identify whether UTI is associated with increased rates of prosthetic joint infection (PJI) and determine whether its treatment reduces PJI rates.

Methods

Patients who underwent primary TSA for glenohumeral osteoarthritis between 2010 and 2019 with minimum two-year follow-up were identified in a national database (PearlDiver Technologies) using Current Procedural Terminology and International Classification of Diseases codes. These patients were stratified into two cohorts: those with preoperative UTI within two weeks of TSA and those without. The preoperative UTI cohort was stratified into those treated and those untreated prior to TSA. Univariate and multivariable analyses were performed.

Results

Following multivariable analysis, there were significantly higher odds of postoperative anemia, pulmonary embolism, and death in the UTI cohort. Comparing treated to untreated UTI, there were no significant differences in multivariable analysis for any 90-day medical or two-year surgical complications.

Discussion

This study showed that UTI was not associated with increased rates of PJI. UTI was, however, associated with postoperative medical complications that surgeons should be aware of.

Evidence of bacterial biofilms within acute wounds: a systematic review

OBJECTIVE

The prevalence and role of biofilm formation in acute wounds has seldom been investigated. Understanding the presence of biofilm in acute wounds would allow earlier, biofilm-targeted management, thus decreasing the morbidity and mortality associated with wound infection, improving patient experience and potentially reducing healthcare costs. The purpose of this study was to summarise the evidence for biofilm formation within acute wounds.

METHOD

We conducted a systematic literature review for studies which reported evidence of bacterial biofilm formation in acute wounds. An electronic search of four databases was carried out, without restrictions on date. The search terms included 'bacteria', 'biofilm', 'acute' and 'wound'.

RESULTS

A total of 13 studies met the inclusion criteria. Of the studies, 69.2% showed evidence of biofilm formation within 14 days of acute wound formation, with 38.5% showing evidence of biofilm 48 hours after wound formed.

CONCLUSION

The evidence from this review suggests that biofilm formation plays a greater role within acute wounds than previously considered.

Inoculation of sonicate fluid into blood culture bottles improves microbial detection in patients with orthopedic bone and soft tissue infections of the upper and lower extremities

BACKGROUND

The usefulness of sonicate fluid culture for biological tissues in orthopedic bone and soft tissue infections have not been reported. We assessed whether inoculating the sonicate fluid of bone and soft tissue into a blood culture bottle could increase the diagnostic accuracy for biofilm-related orthopedic infections.

METHODS

Twenty consecutive patients with infections (9 purulent arthritis, 4 osteomyelitis, 4 purulent tenosynovitis, 2 purulent bursitis, and 1 cellulitis) and 10 non-infected cases (6 carpal tunnel syndrome, 3 Dupuytren contracture, and 1 soft tissue tumor) between October 2018 and December 2020 were evaluated prospectively. We analyzed a total of 107 culture submissions (87 bone and tissue specimens and 20 controls); 42 intraoperative tissue specimens (32 infected samples and 10 non-infected samples) using the conventional method, 45 sonication samples (35 infected samples and 10 non-infected samples), and 20 control samples. Intraoperative infectious tissues were cultured using sonicate fluid culture in a blood culture bottle (SFC-CB). The applications of SFC-CB and the conventional culture method and the detection rate, sensitivity, and relationship between the sensitivity of the diagnostic methods and duration of administered preoperative antibiotics were assessed.

RESULTS

The causative microorganism was detected only by SFC-CB in five patients (25%). The sensitivity (85% vs. 60%; P = 0.077) and detection rate (80% vs. 60%; P = 0.065) were higher for SFC-CB than for the conventional culture method. The sensitivity of SFC-CB was significantly higher than that of the conventional culture method in cases in which preoperative antibiotics were administered for more than 1 week (77% vs. 39%; P = 0.047).

CONCLUSIONS

Using SFC-CB, the diagnostic accuracy for bone and soft tissue infection was significantly improved. As biofilms are readily formed in biological tissues, sonication may also be useful for diagnosis. SFC-CB was particularly useful for cases in which preoperative antibiotics were administered.

Erxian herbal pair enhances bone formation in infected bone nonunion models and attenuates lipopolysaccharide-induced osteoblastinhibition by regulating miRNA-34a-5p

Bacterium-induced inflammatory responses cause bone nonunion. Although antibiotics suppress infection, bone loss after antibacterial treatment remains a critical challenge. Erxian herbal pair (EHP) has been proven effective in promoting bone formation. Our study aimed to investigate the effect of EHP on bone repair after anti-infection treatment, explore its effect on a lipopolysaccharide (LPS)-induced osteoblast. We evaluated effects of EHP on bone repair with Micro-CT, and morphology detecting. Chemical constituents of EHP and EHP-containing serum (EHP-CS) were identified by UHPLC-Q/TOF-MS. In addition, osteoblast induced by LPS was established and administrated with EHP-CS. Cell proliferationwas assessed by MTT. Target prediction identified SMAD2 as a potential target of miRNA-34a-5p. MiRNA mimic, inhibitor and siRNA were transiently transfected into osteoblasts. The mRNA levels and protein expressions of miRNA-34a-5p, BMP2, Runx2, SMAD2 were assessed. The results showed that the main biocactivity ingredients in EHP-CS were Baohuoside Ι and Orcinol Glucoside. EHP could promote bone remolding after anti-infection therapy and restore the activity of LPS-induced osteoblasts. Moreover, miRNA-34a-5p was dramatically downregulated and SMAD2 was upregulated after LPS stimulation, while EHP resisted the inhibition of LPS by promoting miRNA-34a-5p, ALP, and BMP2 expressions. Whereas downregulation of miRNA-34a-5p reversed these effects. Silencing endogenous SMAD2 expression markedly promoted BMP2 and ALP activity and enhanced osteogenesis. Taken together, EHP restored LPS-induced bone loss by regulating miRNA-34a-5p levels and repressing its target gene SMAD2. EHP might be a potential adjuvant herbal remedy for the treatment of bone nonunion, and miRNA-34a-5p is a novel target for controlling bone and metabolic diseases.

Current Knowledge on Biomaterials for Orthopedic Applications Modified to Reduce Bacterial Adhesive Ability

A significant challenge in orthopedics is the design of biomaterial devices that are able to perform biological functions by substituting or repairing various tissues and controlling bone repair when required. This review presents an overview of the current state of our recent research into biomaterial modifications to reduce bacterial adhesive ability, compared with previous reviews and excellent research papers, but it is not intended to be exhaustive. In particular, we investigated biomaterials for replacement, such as metallic materials (titanium and titanium alloys) and polymers (ultra-high-molecular-weight polyethylene), and biomaterials for regeneration, such as poly(ε-caprolactone) and calcium phosphates as composites. Biomaterials have been designed, developed, and characterized to define surface/bulk features; they have also been subjected to bacterial adhesion assays to verify their potential capability to counteract infections. The addition of metal ions (e.g., silver), natural antimicrobial compounds (e.g., essential oils), or antioxidant agents (e.g., vitamin E) to different biomaterials conferred strong antibacterial properties and anti-adhesive features, improving their capability to counteract prosthetic joint infections and biofilm formation, which are important issues in orthopedic surgery. The complexity of biological materials is still far from being reached by materials science through the development of sophisticated biomaterials. However, close interdisciplinary work by materials scientists, engineers, microbiologists, chemists, physicists, and orthopedic surgeons is indeed necessary to modify the structures of biomaterials in order to achieve implant integration and tissue regeneration while avoiding microbial contamination.

Periprosthetic Joint Infection (PJI)—Results of One-Stage Revision with Antibiotic-Impregnated Cancellous Allograft Bone—A Retrospective Cohort Study

Controversy exists regarding the optimal treatment of periprosthetic joint infection (PJI), considering control of infection, functional results as well as quality of life. Difficulties in treatment derive from the formation of biofilms within a few days after infection. Biofilms are tolerant to systemically applied antibiotics, requiring extreme concentrations for a prolonged period. Minimum biofilm eradicating concentrations (MBEC) are only feasible by the local application of antibiotics. One established approach is the use of allograft bone as a carrier, granting a sustained release of antibiotics in very high concentrations after appropriate impregnation. The purpose of this study was to determine the rate of reinfection after a one-stage revision of infected hip or knee prostheses, using antibiotic-impregnated allograft bone as the carrier and avoiding cement. Between 1 January 2004 and 31 January 2018, 87 patients with PJI, according to MSIS, underwent a one-stage revision with antibiotic-impregnated cancellous allograft bone. An amount of 17 patients had insufficient follow-ups. There were 70 remaining patients (34 male, 36 female) with a mean follow-up of 5.6 years (range 2–15.6) and with a mean age of 68.2 years (range 31.5–86.9). An amount of 38 hips and 11 knees were implanted without any cement; and 21 knees were implanted with moderate cementing at the articular surface with stems always being uncemented. Within 2 years after surgery, 6 out of 70 patients (8.6%, CI 2–15.1) showed reinfection and after more than 2 years, an additional 6 patients showed late-onset infection. Within 2 years after surgery, 11 out of 70 patients (15.7%, CI 7.2–24.2) had an implant failure for any reason (including infection) and after more than 2 years, an additional 7 patients had an implant failure. Using Kaplan-Meier analysis for all 87 patients, the estimated survival for reinfection was 93.9% (CI 88.8–99.1) at 1 year, 89.9% (CI 83.2–96.6) at 2 years and 81.5% (CI 72.1–90.9) at 5 years. The estimated survival for implant failure for any reason was 90.4% (CI 84.1–96.7) at 1 year, 80.9% (CI 72.2–89.7) at 2 years and 71.1% (CI 60.3–81.8) at 5 years. One-stage revision with antibiotic-impregnated cancellous allograft bone grants comparable results regarding infection control as with multiple stages, while shortening rehabilitation, improving quality of life for the patients and reducing costs for the health care system.

Continuous Local Antibiotics Perfusion Therapy for Acute Deep Infections after Open Fractures

Unresolved bone and soft tissue infections remain a great hindrance to fracture management worldwide, both economically and functionally for the patient. For this purpose, the benefits of local antibiotic administration besides systemic therapy have been elucidated. We present a retrospective descriptive analysis of six patients (4 males and 2 females) with acute deep infections after open fractures managed using the continuous local antibiotic perfusion (CLAP) therapy. After sufficient debridement, gentamicin solution concentrated at 1,200 μg/mL was continuously infused (2 mL/h) for 7–12 days by syringe pump through an inlet tube placed on the infected area. The antibiotics injected into the infected area were both collected and perfused by negative pressure using a negative-pressure wound therapy system. After an average of 9.5 days of CLAP therapy, symptoms of infection disappeared, and the bacterial culture was negative. There were no cases of recurrence during the follow-up period, and no complications, such as acute renal failure, ototoxicity, allergic or hypersensitivity reactions, and impaired fracture healing, were observed. All six cases were successfully managed with the CLAP therapy without any serious side effects. CLAP therapy may be a potential treatment option for acute deep infections after open fractures.

A novel treatment strategy using continuous local antibiotic perfusion: A case series study of a refractory infection caused by hypervirulent Klebsiella pneumoniae

BACKGROUND

Conventional topical antimicrobial therapy cannot maintain a constant local concentration, resulting in uncontrolled infection and complications. We propose continuous local antibiotic perfusion (CLAP), which can maintain a constant appropriate local antibiotic concentration for a long time with less invasiveness and complications. CLAP is clearly different from traditional treatment because it uses negative pressure to direct the continuously infused antibiotic solution to the center of infection and excrete it outside the body. This study aimed to demonstrate the effectiveness of CLAP by presenting cases in which even refractory bone and soft-tissue infections caused by the hypervirulent Klebsiella pneumoniae (hvKp) could be cured without significant tissue loss and dysfunction.

METHODS

This study is a case series in which four patients with limb infection due to hvKp were treated by CLAP. hvKp was defined by a positive string test. The therapy included intra-soft-tissue antibiotic perfusion and intramedullary antibiotic perfusion. Gentamicin (60 mg/50 cc) was infused continuously through dual-lumen tubes and bone marrow needles at low-flow rates (2 mL/h). Negative pressure was used to collect the antimicrobial solution and eliminate the dead space.

RESULTS

The infection was controlled in all four patients after a mean period of 44.3 days. The mean maximum blood concentration of gentamicin was 1.6 μg/dL, and no cases of renal dysfunction or ototoxicity occurred. After CLAP, wound closure was required in two patients and iliac bone grafting was required in one patient. As sequelae, there were one case of osteoarthritis and one case of higher brain dysfunction due to hypoxia.

CONCLUSIONS

Our results suggest that intractable hvKp infections can be controlled by CLAP. CLAP may give us the option to directly control local infections with less systemic complications. Therefore, it is considered a valuable treatment for further basic and clinical research, and this research report may be a first step.

3D Printing of Temporary Prostheses for Controlled-Release of Drugs: Design, Physical Characterization and Preliminary Studies

In recent years, the use of 3D printing technologies in orthopedic surgery has markedly increased, as they offer the possibility of printing personalized prostheses. The work presented in this article is a preliminary study of a research project which aims to manufacture customized spacers containing antibiotics for use in joint replacement surgery. The objective of this work was to design and print different 3D constructs to evaluate the use of different materials, their properties after the process of 3D printing, such as resistance, and the release kinetics of drugs from the constructs. Different designs and different materials were analyzed to obtain a 3D construct with suitable properties. Our design takes advantage of the micropores created between the layers of the 3D printed filaments to release the contained drug. Using polylactic acid (PLA) we were able to print cylindrical structures with interconnected micropores and a hollow chamber capable of releasing methylene blue, which was selected as a model drug. The final PLA 3D construct was printed with a 10% infill. The physical and technological characteristics, morphological changes at body temperature and interaction with water were considered to be acceptable. The PLA 3D printed constructs were found to have sufficient strength to withstand a force of 500 kg. The results obtained allow to continue research in this project, with the aim of manufacturing prostheses containing a reservoir of antibiotics or other drugs in their interior for their subsequent controlled release.

Incidence and burden of Staphylococcus aureus infection after orthopedic surgeries

OBJECTIVE

To assess the 180-day incidence of Staphylococcus aureus infections following orthopedic surgeries using microbiology cultures.

DESIGN

Retrospective observational epidemiology study.

SETTING

National administrative hospital database.

PATIENTS

Adult patients with an elective admission undergoing orthopedic surgeries in the inpatient and hospital-based outpatient settings discharged between July 1, 2010, and June 30, 2015.

METHODS

Patients were identified from 181 hospitals reporting microbiology results to the Premier Healthcare Database. Orthopedic surgeries were defined using International Classification of Disease, Ninth Revision, Clinical Modification (ICD-9-CM) procedure and current procedural terminology (CPT) codes. Microbiology cultures and ICD-9/10 diagnosis codes identified surgical site infections (SSIs), bloodstream infections (BSIs), and other infections associated postoperatively (eg, respiratory and urinary tract infections).

RESULTS

Among 359,268 inpatient orthopedic surgical encounters, the S. aureus infection incidence was 1.13%: SSI, 0.68%; BSI, 0.28%; and other types, 0.17%. Among 292,011 outpatient encounters, the S. aureus incidence was 0.78%: SSI, 0.55%; BSI, 0.12%; and other types, 0.11%. Methicillin-resistant S. aureus (MRSA) infections accounted for 46% and 44% in the respective settings. Plastic/hand-limb reattachment and amputation had the highest overall S. aureus incidence in both settings. S. aureus was the most commonly isolated microorganism among culture-confirmed SSIs (48.0%) and BSIs (35.0%), followed by other Enterobacteriaceae (14.0%) for SSIs and Escherichia spp (12.5%) for BSIs.

CONCLUSIONS

These findings suggest that S. aureus infections continue to be an important contributor to the burden of postoperative infections after inpatient and outpatient orthopedic procedures.

In Vitro Evaluation of Gentamicin or Vancomycin Containing Bone Graft Substitute in the Prevention of Orthopedic Implant-Related Infections

Antibiotic-loaded bone graft substitutes are attractive clinical options and have been used for years either for prophylaxis or therapy for periprosthetic and fracture-related infections. Calcium sulfate and hydroxyapatite can be combined in an injectable and moldable bone graft substitute that provides dead space management with local release of high concentrations of antibiotics in a one-stage approach. With the aim to test preventive strategies against bone infections, a commercial hydroxyapatite/calcium sulfate bone graft substitute containing either gentamicin or vancomycin was tested against Staphylococcus aureus, Staphylococcus epidermidis and Pseudomonas aeruginosa, harboring different resistance determinants. The prevention of bacterial colonization and biofilm development by selected microorganisms was investigated along with the capability of the eluted antibiotics to select for antibiotic resistance. The addition of antibiotics drastically affected the ability of the selected strains to adhere to the tested compound. Furthermore, both the antibiotics eluted by the bone graft substitutes were able to negatively impair the biofilm maturation of all the staphylococcal strains. As expected, P. aeruginosa was significantly affected only by the gentamicin containing bone graft substitutes. Finally, the prolonged exposure to antibiotic-containing sulfate/hydroxyapatite discs did not lead to any stable or transient adaptations in either of the tested bacterial strains. No signs of the development of antibiotic resistance were found, which confirms the safety of this strategy for the prevention of infection in orthopedic surgery.

Influence of biofilm growth age, media, antibiotic concentration and exposure time on Staphylococcus aureus and Pseudomonas aeruginosa biofilm removal in vitro

BACKGROUND

Biofilm is known to be tolerant towards antibiotics and difficult to eradicate. Numerous studies have reported minimum biofilm eradication concentration (MBEC) values of antibiotics for many known biofilm pathogens. However, the experimental parameters applied in these studies differ considerably, and often the rationale behind the experimental design are not well described. This makes it difficult to compare the findings. To demonstrate the importance of experimental parameters, we investigated the influence of biofilm growth age, antibiotic concentration and treatment duration, and growth media on biofilm eradication. Additionally, OSTEOmycin™, a clinically used antibiotic containing allograft bone product, was tested for antibiofilm efficacy.

RESULTS

The commonly used Calgary biofilm device was used to grow 24 h and 72 h biofilms of Staphylococcus aureus and Pseudomonas aeruginosa, which were treated with time-dependent vancomycin (up to 3000 mg L- 1) and concentration-dependent tobramycin (up to 80 mg L- 1), respectively. Two common bacteriological growth media, tryptic soy broth (TSB) and cation-adjusted Mueller Hinton broth (CaMHB), were tested. We found for both species that biofilms were more difficult to kill in TSB than in CaMHB. Furthermore, young biofilms (24 h) were easier to eradicate than old biofilms (72 h). In agreement with vancomycin being time-dependent, extension of the vancomycin exposure increased killing of S. aureus biofilms. Tobramycin treatment of 24 h P. aeruginosa biofilms was found concentration-dependent and time-independent, however, increasing killing was indicated for 72 h P. aeruginosa biofilms. Treatment with tobramycin containing OSTEOmycin T™ removed 72 h and 168 h P. aeruginosa biofilms after 1 day treatment, while few 72 h S. aureus biofilms survived after 2 days treatment with vancomycin containing OSTEOmycin V™.

CONCLUSIONS

This study demonstrated biofilm removal efficacy was influenced by media, biofilm age and antibiotic concentration and treatment duration. It is therefore necessary to taking these parameters into consideration when designing experiments. The results of OSTEOmycin™ products indicated that simple in vitro biofilm test could be used for initial screening of antibiofilm products. For clinical application, a more clinically relevant biofilm model for the specific biofilm infection in question should be developed to guide the amount of antibiotics used for local antibiofilm treatment.

Injectable Functional Biomaterials for Minimally Invasive Surgery

Injectable materials represent very attractive ready-to-use biomaterials for application in minimally invasive surgical procedures. It is shown that this approach to treat, for example, vertebral fracture, craniofacial defects, or tumor resection has significant clinical potential in the biomedical field. In the last four decades, calcium phosphate cements have been widely used as injectable materials for orthopedic surgery due to their excellent properties in terms of biocompatibility and osteoconductivity. However, few clinical studies have demonstrated certain weaknesses of these cements, which include high viscosity, long degradation time, and difficulties being manipulated. To overcome these limitations, the use of sol-gel technology has been investigated, which has shown good results for synthesis of injectable calcium phosphate-based materials. In the last few decades, injectable hydrogels have gained increasing attention owing to their structural similarities with the extracellular matrix, easy process conditions, and potential applications in minimally invasive surgery. However, the need to protect cells during injection leads to the development of double network injectable hydrogels that are capable of being cross-linked in situ. This review will provide the current state of the art and recent advances in the field of injectable biomaterials for minimally invasive surgery.

Management of Infected Bone Defects of the Lower Extremities by Three-Stage Induced Membrane Technique

BACKGROUND Infected bone defects are therapeutic challenges. Although the induced membrane technique has been used for this problem, there is a 3% to 20.7% failure to eradicate infection, and there have been few reports about its use in tuberculous infection. We present our three-stage induced membrane technique (TSIMT) for treating infected bone defects of the lower extremity. MATERIAL AND METHODS Forty-one adult patients with infected bone defects of the lower extremities treated by TSIMT were included in a retrospective case-series study between January 2013 and June 2018. The clinical, imaging and laboratory assessment outcomes were analyzed. RESULTS In the first stage, 3 patients had ankle tuberculous bone defects and 17 patients underwent 2-4 debridements. In the second stage, the average bone defect was 6.0 cm; 1 patient needed an anterolateral thigh flap to cover the wound. In the third stage, 10 patients underwent autograft mixed allograft, and 18 cases used internal fixation. The mean follow-up period was 23.3 months. All patients achieved bone union and clinical eradication of infection. Changes in Lower Extremity Functional Scale (LEFS) scores after 1 year of TSIMT and bone union time are associated with advanced age, longer duration of infected bone defects, active smoking, and external fixation (p<0.05), but are not dependent on bone defect size, debridement times, type of bone graft, or spacer-placing time (p>0.05). CONCLUSIONS TSIMT is effective in treating infected bone defects of the lower extremities. Advanced age, longer duration of infected bone defects, active smoking, and external fixation adversely affect bone union and recovery of infected extremities in a limited time span.

Synthesis and characterization of antibacterial drug loaded β-tricalcium phosphate powders for bone engineering applications

Powders of β-tricalcium phosphate [β-TCP, β-Ca₃(PO₄)₂] and composite powders of β-TCP and polyvinyl alcohol (PVA) were synthesized by using wet precipitation methods. First, the conditions for the preparation of single phase β-TCP have been delineated. In the co-precipitation procedure, calcium nitrate and diammonium hydrogen phosphate were used as calcium and phosphorous precursors, respectively. The pH of the system was varied in the range 7-11 by adding designed amounts of ammonia solution. The filtered cakes were desiccated at 80 °C and subsequently calcined at different temperatures in the range between 700-1100 °C. Later on, rifampicin form II was used to produce drug-loaded β-TCP and PVA/β-TCP powders. All the synthesized materials have been characterized from morphological (by scanning electron microscopy) and structural-chemical (by X-ray diffraction and Fourier transform infrared spectroscopy) point of view. The drug loading capacity of the selected pure β-TCP powder has been assessed. The biological performance (cytocompatibility in fibroblast cell culture and antibacterial efficacy against Escherichia coli and Staphylococcus aureus) has been tested with promising results. Application perspectives of the designed drug-bioceramic-polymer blends are advanced and discussed.

Which type of bone releases the most vancomycin? Comparison of spongious bone, cortical powder and cortico-spongious bone

Bone infections can be challenging to treat and can lead to several surgeries and relapses. When a graft is needed, cavitary bone loss can be grafted with cancellous or cortical bone. Both can be used for grafting. However, the antibiotic releasing capacity of these grafts has not been compared. Which type of bone is best at releasing the most antibiotic has not been well established. The aim of this study was to determine which type of bone is best for antibiotic release when the bone is suffused with antibiotics by the surgeon. The hypothesis is that there would be a difference between the type of bone tested due to different release capacities of cortical and cancellous bone. This was an experimental study. Cortical spongy bone in chips, Spongy bone in chips and demineralized cortical bone powder were compared. For each type of bone, 5 samples were tested. Processed and decontaminated grafts were freeze-dried to be kept at room temperature. The primary endpoint was the amount of vancomycin released by the graft as it affects the concentration of antibiotic around the graft in clinical practice. The procedure for the study consisted of full graft immersion in a vancomycin solution. Then, the liquid was removed with aspiration. In order to measure the quantity of antibiotic released, the bone was put into distilled water in agitation in a heated rocker at 37 °C. After 30 min of soaking, 1 mL of the liquid was removed. The same extraction process was also carried out after 60 min soaking, 2 h, 3 h, 24 h, and 48 h. No differences were found between each type of bone relative to the concentration of vancomycin released at each time of the assessment. There was a significant difference in the weight of the bone with a higher weight for the cortical powder (1.793 g) versus cortical spongy bone and spongy bone (1.154 g and 1.013 g) with a p value < 0.0001. A significant difference was seen in the weight of the bone with vancomycin after the aspiration of the liquid with 3.026 g for cortical powder, 2.140 g and 2.049 g for the cortical spongy bone and the spongy bone with a p value < 0.0001. In daily clinical practice, one can use cancellous bone, cortico-cancellous bone or cortical powder in order to add vancomycin to a bone graft. Our results show the release kinetics of the soaked allografts. With a maximum of 14 mg/mL in the first minutes and a rapid decrease it shows a pattern comparable to antibiotic loaded bone cement. The method used appears favourable for prophylactic use, protecting the graft against contamination at implantation, but is not sufficient for treating chronic bone infection. LEVEL OF EVIDENCE: V.

Advances in dual functional antimicrobial and osteoinductive biomaterials for orthopaedic applications

A vast growing problem in orthopaedic medicine is the increase of clinical cases with antibiotic resistant pathogenic microbes, which is predicted to cause higher mortality than all cancers combined by 2050. Bone infectious diseases limit the healing ability of tissues and increase the risk of future injuries due to pathologic tissue remodelling. The traditional treatment for bone infections has several drawbacks and limitations, such as lengthy antibiotic treatment, extensive surgical interventions, and removal of orthopaedic implants and/or prosthesis, all of these resulting in long-term rehabilitation. This is a huge burden to the public health system resulting in increased healthcare costs. Current technologies e.g. co-delivery systems, where antibacterial and osteoinductive agents are delivered encounter challenges such as site-specific delivery, sustained and prolonged release, and biocompatibility. In this review, these aspects are highlighted to promote the invention of the next generation biomaterials to prevent and/or treat bone infections and promote tissue regeneration.

Health Care Costs of Post-traumatic Osteomyelitis in China: Current Situation and Influencing Factors

BACKGROUND

Currently, very limited information is available regarding the economic burdens of patients with extremity post-traumatic osteomyelitis (OM). This study aimed to investigate direct health care costs and utilization for inpatients with extremity post-traumatic OM and analyze its constituent ratios and influencing factors in Southern China.

METHODS

We searched in the electronic medical record system for inpatients who had received surgical interventions at our department between 2013 and 2016 for extremity post-traumatic OM. Data of direct health care costs incurred during their hospitalizations were collected in six main categories (service, diagnosis, treatment, materials, pharmaceuticals, and miscellaneous expenses). In addition, data of total medical costs for contemporaneous inpatients with non-post-traumatic OM were also collected as controls.

RESULTS

A total of 278 post-traumatic OM and 10,420 controls were included. The median cost for the post-traumatic OM inpatients was $10,504 US dollars, 4.8-fold higher than that for those with non-post-traumatic OM ($2189, P < 0.001). The direct cost in the category of materials accounted for the largest proportion (61%), followed by that in pharmaceuticals (12%) and treatment (11%). The median number of hospital admissions for post-traumatic OM patients was 1 time, with a median length-of-stay of 22 d. The most influencing factors for the health care costs of the post-traumatic OM inpatients were use of an external fixator ($16,016 for those who used versus $4956 for those who did not, P < 0.001), external fixator type ($19,563 for ring fixator versus $14,966 for rail fixator, P < 0.001), infection site ($13,755 for tibia, $14,216 for femur and $5673 for calcaneus, P < 0.001), and infection-associated injury type ($12,890 for infection after open fracture versus $8087 for infection after closed fracture, P = 0.001).

CONCLUSIONS

An unexpectedly large proportion of the direct health care costs for inpatients with extremity post-traumatic OM went to cover an external fixator, with expenses for pharmaceuticals and treatment accounting for only a little more than the tenth of the total health care costs. Use of external fixator, external fixator type, infection site, and infection-associated injury type directly influenced the health care costs.

Current Insights in the Application of Bone Grafts for Local Antibiotic Delivery in Bone Reconstruction Surgery

Introduction: Bone implant related infection is still one of the biggest challenges in bone and joint surgery. Antibiotic impregnated bone grafts seem to be promising in both treatment and prevention of these infections. However, great variance in methodology predominates this field of research. This paper gives an overview of the published literature.

Methods: The PRISMA-flowchart was used as protocol for article selection. Medline was searched and articles were selected in accordance with predetermined exclusion criteria.

Results: Forty-eight articles were included in the synthesis. Topics including bone graft type, manipulations of the graft, elution profile, bacterial inhibition, osteotoxicity, incorporation, special impregnation methods, clinical use and storage were investigated.

Therapeutically, high initial levels seem appropriate for biofilm eradication. A single stage procedure in the treatment of bone implant related infection seems feasible. Prophylactically, the literature indicates a reduction of postoperative infections when using antibiotic impregnated bone grafts.

Conclusion: Bone grafts are a suitable carrier for local antibiotic application both therapeutically and prophylactically.

MMP-sensitive PEG hydrogel modified with RGD promotes bFGF, VEGF and EPC-mediated angiogenesis

Traumatic soft tissue defects such as bedsores, chronic skin ulcers, limb necrosis, osteonecrosis and other ischemic orthopedic diseases are the most clinically intractable and common problems in orthopedics due to unsatisfactory conventional treatments. The present study designed poly(ethylene glycol; PEG) hydrogels with covalently binded arginylglycylaspartic acid (RGD). Endothelial progenitor cells (EPCs) were encapsulated in the modified hydrogel along with vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF). Results demonstrated that the modified hydrogel displayed good mechanical properties appropriate for a sustained release carrier. RGD modification significantly promoted EPC biocompatibility. VEGF and bFGF encapsulation enhanced the adhesion of EPCs, promoted the production of extracellular matrix and facilitated EPC proliferation. In addition, bFGF and VEGF induced angiogenesis. The combination of growth factors and EPCs in the hydrogel displayed a strong synergy to improve biocompatibility. The present results provided a potential novel treatment approach for soft tissue defects such as bone exposure, chronic skin ulcers, bedsores, limb necrosis, osteonecrosis and other ischemic diseases.

Is Hypercalcemia a Frequent Complication following Local Use of Calcium Sulfate with Antibiotics for the Treatment of Extremity Posttraumatic Osteomyelitis? A Preliminary Study

Background

Previous study had reported hypercalcemia as a frequent complication (20%) following local use of antibiotic-eluting calcium sulfate (CS) during treatment of periprosthetic joint infections (PJIs). However, whether this complication may occur in patients who receive local CS implantation for management of posttraumatic osteomyelitis (OM) remains unclear.

Methods

Between April 2016 and May 2017, we included 55 patients with extremity posttraumatic OM who received local antibiotic-loaded CS therapy. Serum calcium levels were detected preoperatively and on the 1st, 3rd, and 7th postoperative days (PODs). Comparisons were performed regarding serum calcium levels among the four time points and between two different CS volume groups (≤ 20 cc group and > 20 cc group). Additionally, potential associations were examined regarding CS volume and preoperative calcium level with postoperative calcium levels, respectively.

Results

Altogether 46 males and 9 females were included, with a median CS volume of 20 cc. Outcomes showed that prevalence of asymptomatic hypocalcemia was more frequent, with 16.4% before surgery and 60%, 53.8%, and 25% on the 1st, 3rd, and 7th PODs, respectively. Hypercalcemia was not found in any patients, at any time point. In addition, significant differences were identified regarding serum calcium levels among different time points, suggesting significantly decreased calcium levels on the 1st (P < 0.001) and 3rd PODs (P < 0.001) and back to near preoperative level on the 7th POD (P = 0.334). However, no statistical differences were observed regarding serum calcium levels between the two CS volume groups at any time points (P > 0.05). Moreover, no significant links were identified between CS volume and postoperative calcium levels (P > 0.05). Serum calcium levels on the 3rd (P = 0.019) and 7th PODs (P = 0.036) were significantly associated with the preoperative calcium level.

Conclusions

In contrast to what had occurred in PJI patients, asymptomatic hypocalcemia appeared to be more frequent in this cohort with posttraumatic OM. Hypercalcemia may be an infrequent complication before and after local CS use for the treatment of extremity posttraumatic OM.

Interleukin-1 Beta Gene Polymorphism rs16944 May Associate with Increased Susceptibility to Extremity Chronic Osteomyelitis in Chinese Han Population

Background

Previous studies had indicated that interleukin-1 beta (IL-1β) gene single nucleotide polymorphisms (SNPs) associate with different inflammatory diseases. However, potential links between these polymorphisms and susceptibility to extremity chronic osteomyelitis (COM) remain unclear. This study aimed to investigate relationships between IL-1β gene polymorphisms (rs16944, rs1143627, rs1143634, and rs2853550) and risks of developing extremity COM in Chinese Han population.

Methods

Altogether 233 extremity COM patients and 200 healthy controls were genotyped for the four tag SNPs of the IL-1β gene using the SNapShot genotyping method. Comparisons were performed regarding genotype distribution, mutant allele frequency, and four genetic models (dominant, recessive, homozygous, and heterozygous models) of the four SNPs between the two groups.

Results

Significant associations were identified between rs16944 polymorphism and the risk of developing COM by dominant model (P = 0.026, OR = 1.698, 95% CI 1.065-2.707) and heterozygous model (P = 0.030, OR = 1.733, 95% CI 1.055-2.847). Although no statistical differences were found of rs1143627 polymorphism between the two groups, there existed a trend that rs1143627 may be linked to an elevated risk of developing COM by outcomes of dominant (P = 0.061), homozygous (P = 0.080) and heterozygous (P = 0.095) models. However, no statistical correlations were found between rs1143634 and rs2853550 polymorphisms and susceptibility to COM in Chinese Han population.

Conclusions

To our knowledge, we reported for the first time that IL-1β gene rs16944 polymorphism may contribute to the increased susceptibility to extremity COM in Chinese Han population, with genotype of AG as a risk factor.

Multidisciplinary team meeting for complex bone and joint infections diagnosis: The PHICTOS study

BACKGROUND

In France, the most severe bone and joint infections (BJI), called "complex" (CBJI), are assessed in a multidisciplinary team meeting (MTM) in a reference center. However, the definition of CBJI, drawn up by the Health Ministry, is not consensual between physicians. The objective was to estimate the agreement for CBJI classification.

METHODS

Initially, five experts from one MTM classified twice, one-month apart, 24 cases as non-BJI, simple BJI or CBJI, using the complete medical record. Secondly, six MTMs classified the same cases using standardized information. Agreements were estimated using Fleiss and Cohen kappa (κ) coefficients.

RESULTS

Inter-expert agreement during one MTM was moderate (κ=0.49), and fair (κ=0.23) when the four non-BJIs were excluded. Intra-expert agreement was moderate (κ=0.50, range 0.27-0.90), not improved with experience. The overall inter-MTM agreement was moderate (κ=0.58), it was better between MTMs with professor (κ=0.65) than without (κ=0.51) and with longer median time per case (κ=0.60) than shorter (κ=0.47). When the four non-BJIs were excluded, the overall agreement decreased (κ=0.40).

CONCLUSION

The first step confirmed the heterogeneity of CBJI classification between experts. The seemingly better inter-MTM than inter-expert agreement could be an argument in favour of MTMs, which are moreover a privileged place to enhance expertise. Further studies are needed to assess these results as well as the quality of care and medico-economic outcomes after a MTM.

Antimicrobial Imidazolium Ionic Liquids for the Development of Minimal Invasive Calcium Phosphate-Based Bionanocomposites

Biofilm formation is one of the main obstacles that occur during in vivo implantation, which compromises the implant functionality and patients' health. This is the inspiration for the development of novel implant materials that contain broad-spectrum antimicrobial activity, including antibacterial and antifungal, and enable the local release of antimicrobial agents. Here, multifunctional calcium phosphate-ionic liquid (IL) materials, possessing antimicrobial and repair/regeneration features plus injectability, are proposed as implants in minimally invasive surgery. This approach was based on the loading of 1-alkyl-3-alkylimidazolium chloride ionic liquids (ILs) (C _nMImCl ( n = 4, 10, 16) and (C₁₀)₂MImCl) during the in situ sol-gel synthesis of calcium phosphates (CaP) and study of their effects on CaP crystallization and biological properties. Physical, morphological, and biological investigations were performed to evaluate the bionanocomposites' properties. The IL N-alkyl chain length influenced the crystallization of CaP and, consequently, the biological properties, which afforded bionanocomposites (when loaded with C₁₆MImCl or (C₁₀)₂MImCl) that, (i) inhibit both in vitro bacterial and fungal growth; (ii) reduce the in vitro inflammatory response; (iii) induce osteogenic differentiation in the basal medium of human mesenchymal stem cells; and (iv) are injectable. This will enable the design of multifunctional injectable implants with antimicrobial, anti-inflammatory, and regenerative properties to be used in minimally invasive surgery of bone and maxillofacial defects.

Antibiotic-loaded Porous Alumina Ceramic for One-stage Surgery for Chronic Osteomyelitis

The classic treatment of chronic osteomyelitis is usually a two-stage surgery combined with systemic antibiotic therapy for several months. We report the case of a patient presenting a chronic osteomyelitis caused by methicillin-resistant Staphylococcus aureus who was treated with a one-stage surgery using an antibiotic-loaded ceramic. We used a porous alumina ceramic loaded with gentamicin to reconstruct the bone removed during débridement and to avoid its colonization. All bacteriological samples performed before and during the surgery revealed the presence of a methicillin-resistant S aureus. Because of the local release of the antibiotic, very high concentrations (more than 50 times the concentration needed) were administered in the surgical wound, thus helping to cure the infection. Owing to the strength of the ceramic, the patient was allowed to walk 10 days after the surgery. After a follow-up at 14 months, the patient is well-being, without any relapse of the infection. The CT-scan follow-up shows an osseointegration of the ceramic. Even, if it is too early to tell that infection is completely cured, these first results are encouraging for the use, in the future, of this antibiotic-loaded ceramic for complex bone infection.

Efficacy of antifungal-impregnated cement spacer against chronic fungal periprosthetic joint infections after total knee arthroplasty

BACKGROUND

Although two-stage exchange arthroplasty is considered a treatment of choice for chronic features of fungal PJI (periprosthetic joint infection), there is no consensus for local use of antifungal agent. The purpose of this study was to evaluate the efficacy of antifungal-impregnated cement spacer (AICS).

METHODS

Nine patients who were diagnosed and treated for chronic fungal PJI after TKA in a single center from January 2001 to December 2016 were enrolled. Two-stage exchange arthroplasty was performed. During the 1st stage resection arthroplasty, AICS was inserted for all patients. Systemic antifungal medication was used during the interval between the two stage operations.

RESULTS

The average duration from the initial symptom to fungal PJI diagnosis was 20 months (range, five to 72 months). Average erythrocyte sedimentation rate and C-reactive protein level at diagnosis were 56 mm/h (range, 30 to 89 mm/h) and 2.25 mg/dl (range, 0.11 to 3.97 mg/dl), respectively. Fungal PJI was confirmed by open debridement tissue culture in three cases (33%). The average number of operations before final exchange arthroplasty was 2.7 times (range, one to five times). Average duration of antifungal agent use confirmed by sensitivity test was seven months (range, four to 15 months). Mean interval between the two stage operations was six months (range, 1.5 to 15 months). After two-stage exchange arthroplasty, no patient had recurrent fungal infection during a mean follow-up of 66 months (range, 24 to 144 months).

CONCLUSION

Two-stage exchange arthroplasty with AICS is a very effective strategy with excellent outcomes.

LEVEL OF EVIDENCE

Case series, IV.

Current therapies in treatment and prevention of fracture wound biofilms: why a multifaceted approach is essential for resolving persistent infections

Traumatic orthopedic injuries, particularly extremity wounds, are a significant cause of morbidity. Despite prophylactic antibiotic treatment and surgical intervention, persistent infectious complications can and do occur. Persistent bacterial infections are often caused by biofilms, communities of antibiotic tolerant bacteria encased within a matrix. The structural and metabolic differences in this mode of growth make treatment difficult. Herein, we describe both established and novel, experimental treatments targeted at various stages of wound healing that are specifically aimed at reducing and eliminating biofilm bacteria. Importantly, the highly tolerant nature of these bacterial communities suggests that most singular approaches could be circumvented and a multifaceted, combinatorial approach will be the most effective strategy for treating these complicated infections.

Chronic infection and infected non-union of the long bones in paediatric patients: preliminary results of bone versus beta-tricalcium phosphate grafting after induced membrane formation

PURPOSE

Chronic infection (CO) and infected non-union of the long bones are relatively rare conditions in paediatric patients. Large bone defects secondary to these conditions can be managed with the induced membrane technique. The technique requires grafting of the bone void, although it is not yet established what bone substitute is the best option. The aim of this work was to evaluate the outcome and efficacy of treatment in children with CO and infected non-union of the long bones using the induced membrane technique and bone (BG) versus beta-tricalcium phosphate (BTP) grafting.

METHODS

Eight skeletally immature patients with CO and infected non-union of the long bones were treated surgically between 2010 and 2017 by a combination of resection of necrotic infected bone, debridement of surrounding soft tissue, osteosynthesis using a stable internal fixation when needed, and application of antibiotic-laden cement (ALC) spacer inducing new membrane before final bone reconstruction with bone substitutes: BTP in five cases, BG (allograft and/or autologous graft) in three cases. A second surgical step, once inflammatory markers had normalized, consisted of ALC spacer removal, application of BG or BTP graft and concomitant stable osteosynthesis, if needed, if this had not been done during the first surgical stage. All the patients underwent clinical, laboratory and imaging evaluation before and after surgery. Antibiotics were adjusted according to culture and sensitivity.

RESULTS

Mean patient age at time of diagnosis was 13 ± four years (range, 4-16) and all had at least a 12-month follow-up (range 12-60). Estimated time for induced membrane formation was significantly shorter in patients treated with BTP compared with BG: 3±1 vs. 10±2 (p = 0.02). This result was confirmed by multivariate analysis (p = 0.044) taking into account adjustment for age of patients and time after initial surgery. Time of final union was about 5.5 ± 4.1 months (range 2-66). At the last follow-up visit, bone had healed and all the patients had resumed daily living and sports activities.

CONCLUSION

The induced membrane technique with BG or BTP graft can achieve bone healing in large bone defects secondary to CO and infected non-union in children and adolescents. The choice of bone substitute is important. Our preliminary results show graft integration and bone healing can be expected sooner if BTP is used as bone void filler.