A double mobility acetabular implant for primary hip arthroplasty in patients at high risk of dislocation

THE CEMENTED DOUBLE MOBILITY CUP IN HIP REVISION: DIFFERENT POSSIBILITIES OF USE

Introduction

The aim of our work is to review those patients who underwent prosthetic hip revision surgery in our hospital considered to be patients at high risk of dislocation or recurrent dislocation, and who underwent a double mobility cemented cup (CMD). Analyzing the different ways to place these cups and the clinical results and reluxations.

Material and methods

The 69 cases comprised 34 men and 35 women with a mean age of 77,39 years. The mean follow-up was 4.7536 years. The type of intervention performed varied according to the cause of the intervention, the acetabular bone stock and the state of the primary cup. In the cases in which there was a good fixation of the primary metalback, we opted to carry out a cementation of the cemented DMC into the existing well-fixed metal acetabular shell, this occurred in 23 cases. In the cases where there was loosening of the primary cup but there was a good bone stock, a CMD was cemented into the bone (21 cases). In the cases where there was a Paprosky type III we cemented a DMC to a Bursch-Schneider reinforcement ring together with the placement of a cancellous bone graft (25 cases).

Results

The clinical evaluation at the end of the follow-up, according to the MD Scale, showed the mean value was 16.454 (SD 0.79472), with a survival at the end of the follow-up of 100% of the placed DMC.

Conclusion

The use of cemented DMC is a good solution in the replacement of THA, especially in cases of reluxation or risk of dislocation due to personal or technical predisposing factors. The use of these DMC cemented can be directly to the bone, into the existing well-fixed metal Shell, or cemented to a reinforcing ring, depending on the acetabular defect. Evidence Level III; Comparative Case Series .

The Saturne cementless dual-mobility cup grants satisfactory long-term survival

Purpose

To report long-term survival and clinical outcomes of primary total hip arthroplasty (THA) using a Saturne cementless dual-mobility (DM) cup, and investigate whether patient demographics or surgical parameters affect clinical scores.

Methods

A consecutive series of primary THAs implanted with Saturne cementless DM cups between 01/09/2009–31/12/ 2011 was retrospectively assessed. Patients were postoperatively evaluated using modified Harris hip score (mHHS) and forgotten joint score (FJS). Complications, reoperations, and revisions were noted. Regression analyses were performed to determine associations of postoperative mHHS with preoperative and intraoperative variables. Ten-year Kaplan–Meier survival was calculated.

Results

Of 308 patients (308 hips), 111 (36%) had died with their original cups in place, 29 (9%) were lost-to-follow-up, and 5 (2%) required cup revision, leaving a final cohort of 163 (53%) with their original cup in place at a follow-up of ≥ 10 years. Ten-year survival was 98% considering cup revision for any reason as endpoint; 99% considering cup revision for aseptic loosening as endpoint; 96% considering stem revision for any reason as endpoint; and 96% considering any revision as endpoint. The final cohort of 163 patients was assessed at 11 ± 1 years (range, 10–13), mHHS was 85 ± 16 (range, 31–100) and FJS was 84 ± 24 (range, 0–100). Multivariable regression analysis revealed that postoperative mHHS significantly worsened with age (β = -0.48, p = 0.007) and BMI (β = -0.70, p = 0.008), as well as for 22 mm head sizes (β = -6.98, p = 0.046).

Conclusions

The Saturne DM cup granted satisfactory survival and clinical outcomes at a minimum follow-up of 10 years, and resulted in no cases of intra- or extra-prosthetic dislocations.

Structural design and mechanical performance of composite vascular grafts

This study reviews the state of the art in structural design and the corresponding mechanical behaviours of composite vascular grafts. We critically analyse surface and matrix designs composed of layered, embedded, and hybrid structures along the radial and longitudinal directions; materials and manufacturing techniques, such as tissue engineering and the use of textiles or their combinations; and the corresponding mechanical behaviours of composite vascular grafts in terms of their physical–mechanical properties, especially their stress–strain relationships and elastic recovery. The role of computational studies is discussed with respect to optimizing the geometrics designs and the corresponding mechanical behaviours to satisfy specialized applications, such as those for the aorta and its subparts. Natural and synthetic endothelial materials yield improvements in the mechanical and biological compliance of composite graft surfaces with host arteries. Moreover, the diameter, wall thickness, stiffness, compliance, tensile strength, elasticity, and burst strength of the graft matrix are determined depending on the application and the patient. For composite vascular grafts, hybrid architectures are recommended featuring multiple layers, dimensions, and materials to achieve the desired optimal flexibility and function for complying with user-specific requirements. Rapidly emerging artificial intelligence and big data techniques for diagnostics and the three-dimensional (3D) manufacturing of vascular grafts will likely yield highly compliant, subject-specific, long-lasting, and economical vascular grafts in the near-future.

Graphic abstract

The Incidence and Temporal Trends of Dislocation After the Use of Constrained Acetabular Components and Dual Mobility Implants in Primary Total Hip Replacements: A Systematic Review and Meta-Analysis of Longitudinal Observational Studies

BACKGROUND

Dislocation after a primary total hip replacement (pTHR) remains a common cause of treatment failure. Constrained acetabular components (CACs) and dual mobility implants (DMIs) may mitigate this in patients at high risk of dislocation or with significant intraoperative instability. This meta-analysis evaluated the incidence and temporal trends of dislocation after implantation with CACs and DMIs in pTHR.

METHODS

Longitudinal studies reporting dislocation after the use of CACs or DMIs in pTHR were sought from Medline and Embase to September 2020. Secondary outcomes included revision surgery for dislocation and for all causes.

RESULTS

A total of 46 studies (3 CAC and 43 DMI) comprising 582 CACs and 18,748 DMIs were included. The pooled incidence of dislocation was 1.08% (95% confidence interval [CI]: 0.00-3.72; range 0.27%-2.60%) over a weighted mean follow-up of 4.1 years for CACs, compared with 0.25% (95% CI: 0.08-0.46; range 0.00%-4.72%) over 6.2 years for DMIs. For DMIs, there was a temporal decline in dislocations from the 1980s onward, and dislocation rates remained low (<1%) until 15 years postoperatively. There were insufficient data for similar analysis of CACs. All studies were at high risk of bias. The incidence of revision for dislocation after CACs was 0.3% vs 0.1% for DMIs, and the incidence of revision for all causes after CACs was 4.8% vs 2.7% for DMIs.

CONCLUSION

DMIs demonstrated a lower incidence of dislocation compared with CACs; however, there was a relative absence of CACs used in the context of pTHR in the literature. Temporal trends in dislocation have improved over time for DMIs.

Absence of instabilities and intra-prosthetic dislocations at 7 to 11 years following THA using a fourth-generation cementless dual mobility acetabular cup

PURPOSE

Dual-mobility (DM) cups are increasingly used in total hip arthroplasty (THA) but there lacks literature on their long-term results. We aimed to investigate outcomes of a fourth-generation cementless DM acetabular cup at 7-11 years.

METHODS

We retrospectively evaluated 240 consecutive hips that received cementless THA using the same dual mobility cup (Novae Sunfit TH) and femoral stem (Corail). Patients were recalled at ≥7 years to collect Oxford hip scores (OHS), Harris hip scores (HHS), and inspect for radiolucent lines and granulomas. Multi-variable analyses were performed to determine whether HHS or OHS were associated with pre- or intra-operative variables.

RESULTS

At 8.4 ± 0.8 years (range, 7-11), 6 hips were revised (2.5%), 54 deceased (22.5%), and 14 could not be reached (5.8%). Four revisions (2 cup+stem, 2 liners only) were due to sepsis (1.7%), one (cup and stem) for trauma (0.4%), and one (stem) due to aseptic loosening (0.4%). For the remaining 166 hips, HHS was 83.6 ± 13.2 and OHS was 20.3 ± 6.7. Multi-variable analysis confirmed that HHS (β = - 0.38; p = 0.039) and OHS (β = 0.36; p < 0.001) worsened with age, and that OHS was worse for Charnley C patients (β = 3.17; p = 0.009). Neither granulomas nor radiolucenies were observed around any cups, but radiolucenies were seen around 25 stems (20.3%).

CONCLUSIONS

This fourth-generation DM cup demonstrated satisfactory outcomes at 7-11 years, with no instabilities or cup revisions due to aseptic loosening. Better OHS was observed for younger patients and those presenting higher Charnley grade.

LEVEL OF EVIDENCE

Level IV, retrospective case study.

Can dual mobility cups prevent dislocation without increasing revision rates in primary total hip arthroplasty? A systematic review

BACKGROUND

Dislocation is one of the leading causes for early revision surgery after total hip arthroplasty (THA). To address this problem, the dual mobility (DM) cup was developed in the 1970s by the French. Despite the increased and, in some countries, broad use of DM cups, high quality evidence of their effectiveness compared to traditional unipolar (UP) cups is lacking. There are a few well-conducted literature reviews, but the level of evidence of the included studies was moderate to low and the rates of revision were not specifically investigated. Therefore, we did a systematic review to investigate whether there is a difference in the rate of dislocations and revisions after primary THA with a DM cup or a UP cup.

METHODS

We conducted a systematic literature search in PubMed, Embase and Cochrane databases in July 2019. The articles were selected based upon their quality, relevance and measurement of the predictive factor. We used the MINORS criteria to determine the methodological quality of all studies.

RESULTS

The initial search resulted in 702 citations. After application of the inclusion and exclusion criteria, eight articles met our eligibility criteria and were graded. Included studies were of medium to low methodological quality with a mean score of 14/24 (11-16) points following the MINORS criteria. In the case-control studies, a total of 549 DM cups and 649 UP cups were included. In the registry studies, a total of 5.935 DM cups and 217.362 UP cups were included. In the case-control studies, one (0.2%) dislocation was reported for the DM cups and 46 (7.1%) for the UP cup (p=0.009, IQR=0.00-7.00). Nine (1.6%) revisions, of which zero due to dislocation, were reported for the DM cup and 39 (6.0%), of which 30 due to dislocation, for the UP cup (p=0.046, CI=-16.93-5.73). In the registry studies 161 (2.7%) revisions were reported for the DM cup, of which 14 (8.7%) due to dislocation. For the UP cup, 3.332 (1.5%) revisions were reported (p=0.275, IQR=41.00-866.25), of which 1.093 (32.8%) due to dislocation (p=0.050, IQR=3.50-293.25).

CONCLUSION

This review suggests lower rates of dislocation and lower rates of revision for dislocation in favor of the DM cups. Concluding, DM cups might be an effective solution to reduce dislocation in primary THA. To evaluate the efficacy of DM cups compared to UP cups, an economic evaluation alongside a randomized controlled trial is needed focusing on patient important endpoints.

LEVEL OF EVIDENCE

III, systematic review of level III studies.

The posterior acetabular wall (PAW): an aid to acetabular orientation at primary THA

INTRODUCTION

Incorrect acetabular component positioning during total hip arthroplasty (THA) may lead to dislocation, impingement, wear and revision. Surgeons commonly use the transverse acetabular ligament (TAL) as a landmark for acetabular component orientation. The posterior acetabular wall (PAW) is a structure easily viewed on plain radiography and its position can help guide acetabular component position. In this study, we examine the efficacy of preoperative radiographs in predicting cup position relative to the PAW.

METHODS

Prospective data was recorded on radiographic findings of the posterior wall (prominent, normal, deficient) on a consecutive series of 200 primary THAs utilising a standardised posterior approach. The final cup position relative to the wall was recorded (prominent, flush, deep). Cup inclination and version were then assessed by postoperative radiography and any instances of dislocation recorded.

RESULTS

There were 117 females and 83 males with a mean age of 66.5 years. 154 were recorded as having a normal PAW on radiographs, 152 had the cup positioned in line with the TAL and flush to the PAW. 29 had a deficient PAW and 27 of these had a cup positioned prominently with 17 having a prominent PAW and of these 16 a deep cup position. Postoperative radiographs showed a mean cup version of 20.8° and inclination of 44.7° using this method. There were 21 outliers (10.5%) with no dislocations at a minimum 12-month follow-up.

CONCLUSIONS

The TAL is a continuation of the posterior labrum. As such, the posterior wall is a useful adjunct to and surrogate landmark for the TAL. It has the added advantage that it is visible on radiographs and so aids surgical planning with respect to cup positioning.

Early intraprosthetic dislocation in dual-mobility implants: a systematic review

BACKGROUND

Dual mobility implants are subject to a specific implant-related complication, intraprosthetic dislocation (IPD), in which the polyethylene liner dissociates from the femoral head. For older generation designs, IPD was attributable to late polyethylene wear and subsequent failure of the head capture mechanism. However, early IPDs have been reportedly affecting contemporary designs.

METHODS

A systematic review of the literature according to the preferred reporting items for systematic reviews and meta-analyses guidelines was performed. A comprehensive search of PubMed, MEDLINE, Embase, and Google Scholar was conducted for English articles between January 1974 and August 2016 using various combinations of the keywords "intraprosthetic dislocation," "dual mobility," "dual-mobility," "tripolar," "double mobility," "double-mobility," "hip," "cup," "socket," and "dislocation."

RESULTS

In all, 16 articles met our inclusion criteria. Fourteen were case reports and 2 were retrospective case series. These included a total of 19 total hip arthroplasties, which were divided into 2 groups: studies dealing with early IPD after attempted closed reduction and those dealing with early IPD with no history of previous attempted closed reduction. Early IPD was reported in 15 patients after a mean follow-up of 3.2 months (2.9 SD) in the first group and in 4 patients after a mean follow-up of 15.1 months (9.9 SD) in the second group.

CONCLUSIONS

Based on the current data, most cases have been preceded by an attempted closed reduction in the setting of outer, large articulation dislocation, perhaps indicating an iatrogenic etiology for early IPD. Recognition of this possible failure mode is essential to its prevention and treatment.

Advances in hip arthroplasty surgery: what is justified?

Total hip arthroplasty (THA) surgery has shown dramatic changes in terms of increased number of procedures and of technical development in recent years. It has been described as “the operation of the 20^th century” for the excellent results, the high satisfaction of the patients and the improvement of the quality of life.

A lot of variations have been introduced over the last few decades in THA especially in terms of indications (both in younger and older patients), techniques and devices (approaches, tissue preservation, biomaterials and industrial finishing), per-operative management (blood loss and pain control) and post-operative protocols (the so called “fast track” surgery). Looking at all these advances the emerging question is: have all of them been justified both in terms of improvement of the results for the patients and of the cost/benefit ratio from an economical point of view?

The purpose of this paper is to critically analyse the advantages and the disadvantages of the theoretically proposed “advances in hip arthroplasty” and attempt to understand which are justified of such “advances” nowadays, based on the international and the European perspective with a focus on the author’s personal clinical experience.

Cite this article: EFORT Open Rev 2017;2. DOI: 10.1302/2058-5241.2.170008. Originally published online at www.efortopenreviews.org

Constrained liners, dual mobility or large diameter heads to avoid dislocation in THA

Dislocation remains a common cause of failure after total hip arthroplasty. The limitations of existing approaches to address instability have led to the development of powerfull options: constrained liners, dual mobility and large heads. These implant-related options have proven to be very efficient, but have raised concerns.With constrained liners, restricted range of motion (ROM) is responsible for impingement leading to high likelihood of failure, depending on the design, with various failure modes.Improvements of the bearing materials have addressed some of the concerns about increased volumetric wear of conventional polyethylene and offer an option to reduce instability: large diameter heads have the advantage of increased ROM before impingement, increased head-neck ratio, and jump distance. Highly cross-linked polyethylene helps address the risk for increased wear, and also large heads provide improved stability without the risk of mechanical failures observed with constrained liners. However, the increase of the head size remains limited as reducing the thickness of the liner may lead to fractures. In addition, the jump distance decreases as the cup abduction increases.The dual mobility concept simultaneously attempts to address head-neck ratio, constraint, and jump distance. Despite the need for longer follow-up, concerns raised about potential increased wear and intra-prosthetic dislocation with first generation implants have been addressed with modern designs.With a dramatic increase of the head-neck ratio whilst reducing the risk of mechanical failure or excessive wear, dual mobility THA outperforms large diameter heads and constrained liners at 10 years follow-up. For these reasons, dual mobility continues to gain interest worldwide and is becoming the most popular option to manage instability. Cite this article: Guyen O. Constrained liners, dual mobility or large diameter heads to avoid dislocation in THA. EFORT Open Rev 2016;1:197-204. DOI: 10.1302/2058-5241.1.000054.

Dislocation following total hip arthroplasty using dual mobility acetabular components: a systematic review

AIMS

The aim of this systematic review was to report the rate of dislocation following the use of dual mobility (DM) acetabular components in primary and revision total hip arthroplasty (THA).

MATERIALS AND METHODS

A systematic review of the literature according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines was performed. A comprehensive search of Pubmed/Medline, Cochrane Library and Embase (Scopus) was conducted for English articles between January 1974 and March 2016 using various combinations of the keywords "dual mobility", "dual-mobility", "tripolar", "double-mobility", "double mobility", "hip", "cup", "socket". The following data were extracted by two investigators independently: demographics, whether the operation was a primary or revision THA, length of follow-up, the design of the components, diameter of the femoral head, and type of fixation of the acetabular component.

RESULTS

In all, 59 articles met our inclusion criteria. These included a total of 17 908 THAs which were divided into two groups: studies dealing with DM components in primary THA and those dealing with these components in revision THA. The mean rate of dislocation was 0.9% in the primary THA group, and 3.0% in the revision THA group. The mean rate of intraprosthetic dislocation was 0.7% in primary and 1.3% in revision THAs.

CONCLUSION

Based on the current data, the use of DM acetabular components are effective in minimising the risk of instability after both primary and revision THA. This benefit must be balanced against continuing concerns about the additional modularity, and the new mode of failure of intraprosthetic dislocation. Longer term studies are needed to assess the function of these newer materials compared with previous generations. Cite this article: Bone Joint J 2017;99-B(1 Supple A):18-24.