Proximal femoral structure and the prediction of hip fracture in men: a large prospective study using QCT

Bisphosphonate conjugation enhances the bone-specificity of NELL-1-based systemic therapy for spaceflight-induced bone loss in mice

Microgravity-induced bone loss results in a 1% bone mineral density loss monthly and can be a mission critical factor in long-duration spaceflight. Biomolecular therapies with dual osteogenic and anti-resorptive functions are promising for treating extreme osteoporosis. We previously confirmed that NELL-like molecule-1 (NELL-1) is crucial for bone density maintenance. We further PEGylated NELL-1 (NELL-polyethylene glycol, or NELL-PEG) to increase systemic delivery half-life from 5.5 to 15.5 h. In this study, we used a bio-inert bisphosphonate (BP) moiety to chemically engineer NELL-PEG into BP-NELL-PEG and specifically target bone tissues. We found conjugation with BP improved hydroxyapatite (HA) binding and protein stability of NELL-PEG while preserving NELL-1's osteogenicity in vitro. Furthermore, BP-NELL-PEG showed superior in vivo bone specificity without observable pathology in liver, spleen, lungs, brain, heart, muscles, or ovaries of mice. Finally, we tested BP-NELL-PEG through spaceflight exposure onboard the International Space Station (ISS) at maximal animal capacity (n = 40) in a long-term (9 week) osteoporosis therapeutic study and found that BP-NELL-PEG significantly increased bone formation in flight and ground control mice without obvious adverse health effects. Our results highlight BP-NELL-PEG as a promising therapeutic to mitigate extreme bone loss from long-duration microgravity exposure and musculoskeletal degeneration on Earth, especially when resistance training is not possible due to incapacity (e.g., bone fracture, stroke).

Comparison of DXA-based versus CT-based indices to predict prevalent fracture history in men with spinal cord injury

Fracture risk prediction remains challenging in adults with spinal cord injury. Here, we compare the ability of CT- and DXA-derived indices to discriminate between those with and without prevalent osteoporotic fracture. Novel CT-derived indices may offer improved assessment of fragility fracture risk as well as improved monitoring of response to therapies.

INTRODUCTION

Individuals with spinal cord injury are particularly susceptible to osteoporosis. As advanced imaging techniques become more readily available clinically, there is limited information on the relative strength of various outcomes for fracture risk prediction. The purpose of this study was to compare the ability of DXA-based versus CT-based indices to predict prevalent fracture history in adults with spinal cord injury.

METHODS

Thirty-six men with known SCI underwent dual energy X-ray absorptiometry and computed tomography assessments of the lower extremities. We used age-adjusted area under the curve models to compare the predictive value for each bone parameter to identify prevalent fracture history.

RESULTS

CT-based indices outperformed DXA-based indices at all sites. The site with the highest AUC was the trabecular BMD at the proximal tibial epiphysis.

CONCLUSIONS

CT imaging may have clinical utility to improve fracture risk prediction in adults with SCI. More work is needed to confirm these findings and to assess the value of CT-based indices to predict incident fracture, monitor longitudinal bone loss, and monitor response to various therapies, both pharmacological and rehabilitation.

Reduced trabecular bone mineral density and thinner cortices in men with distal forearm fractures

Men with distal forearm fractures have reduced bone density, an increased risk of osteoporosis and of further fractures. The aim of the study was to investigate the structural determinants of these observations using quantitative CT (qCT). Ninety six men with low-trauma distal forearm fracture and 101 age-matched healthy control subjects were recruited. All subjects underwent a quantitative CT on a standard 64-slice whole body CT scanner. These were analysed on Mindways QCT PRO™ Software to generate volumetric and geometric data at the lumbar spine, femoral neck and total hip, ultra-distal and distal 33 % radius. Biochemical investigations, health questionnaires and measurements of bone turnover were made. Men with fracture had significantly lower total and trabecular vBMD at all sites. The greatest percentage reduction was at the ultra-distal radius (13.5 % total and 11.7 % trabecular vBMD). In the fracture group cortical vBMD was significantly higher in the femoral neck (p < 0.001) and maintained at the ultra-distal radius compared with control subjects. However, cortical cross-sectional area (CSA) and thickness were significantly reduced at the femoral neck (p < 0.001 and p = 0.002 respectively) and forearm sites (CSA ultradistal radius p = 0.001, cortical thickness p = 0.002, CSA distal one third radius p = 0.045 and cortical thickness p = 0.005). Cross sectional moment of inertia (CSMI) and section moduli were significantly reduced at the femoral neck (CSMI1 p = 0.002, CSMI2 p = 0.012 and section moduli Z1 p < 0.001, Z2 p = 0.004) and the ultra-distal radius (CSMI1 p = 0.008 and section moduli Z1 p = 0.018, Z2 p = 0.007). In stepwise logistic regression analysis distal forearm fracture showed the strongest association with a model comprising ultra-distal forearm trabecular vBMD (negative), procollagen type I N-terminal propeptide (PINP, positive) and sex hormone binding globulin (SHBG, negative). In conclusion, these observations explain the structural reasons for the increased fracture risk in men with distal forearm fractures.

Association of Vitamin D and Parathyroid Hormone Status With the Aging-Related Decline of Bone Microarchitecture in Older Men: The Prospective Structure of Aging Men's Bones (STRAMBO) Study

Poor vitamin D status and high parathyroid hormone (PTH) level are associated with impaired bone microarchitecture, but these data are mainly cross-sectional. We studied the association of the baseline PTH and 25-hydroxycholecalciferol (25OHD) levels with the prospectively assessed deterioration of bone microarchitecture and in estimated bone strength in older men. Distal radius and tibia bone microarchitecture was assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT) at baseline, then after 4 and 8 years in 826 men aged 60-87 years. At distal radius, total bone mineral density (Tt.BMD), cortical thickness (Ct.Th^d ), cortical area (Ct.Ar), cortical BMD (Ct.BMD), and trabecular BMD (Tb.BMD) decreased, whereas trabecular area (Tb.Ar) increased more rapidly in men with 25OHD ≤20 ng/mL versus the reference group (>30 ng/mL). Men with 25OHD ≤10 ng/mL had faster decrease in reaction force and failure load than men with 25OHD >30 ng/mL. At the distal tibia, Tt.BMD, Ct.Th^d , Ct.Ar, Ct.BMD, failure load, and reaction force decreased, whereas Tb.Ar increased more rapidly in men with 25OHD between 10 and 20 ng/mL versus the reference group. The results were similar when 12 ng/mL was used as a threshold of severe vitamin D deficiency. At distal radius, men with PTH levels above the median (>44 pg/mL) had more rapid decrease in Tt.BMD, Ct.Ar, Ct.BMD, Ct.Th^d , reaction force, and failure load, and more rapid increase in Tb.Ar versus the lowest quartile (≤34 pg/mL). At the distal tibia, men in the highest PTH quartile had faster decrease in Tt.BMD, Ct.Th^d , Ct.Ar, Ct.BMD, reaction force, and failure load and faster increase in Tb.Ar versus the lowest quartile. The results were similar in men with glomerular filtration rate >60 mL/min. The results were similar in men who took no vitamin D or calcium supplements for 8 years. In summary, vitamin D deficiency and secondary hyperparathyroidism are associated with more rapid prospectively assessed cortical and trabecular bone decline in older men. © 2022 American Society for Bone and Mineral Research (ASBMR).

Triglyceride Glucose-Body Mass Index Is a Reliable Indicator of Bone Mineral Density and Risk of Osteoporotic Fracture in Middle-Aged and Elderly Nondiabetic Chinese Individuals

(1) Background: This study aimed to investigate the relationship of triglyceride glucose−body mass index (TyG-BMI) with bone mineral density (BMD), femoral neck geometry, and risk of fracture in middle-aged and elderly Chinese individuals. (2) Methods: A total of 832 nondiabetic individuals were selected from the prospective population-based HOPE cohort. All individuals underwent DXA for assessment of BMD at the lumbar spine, femoral neck, and total hip, as well as femoral neck geometry. The 10-year probabilities of both major osteoporotic (MOFs) and hip fractures (HFs) were calculated. (3) Results: Cortical thickness, compression strength index, cross-sectional moment of inertia, cross-sectional area, section modulus, and 25(OH)D levels were significantly lower in women (all p < 0.001). The presence of osteoporosis was related to age, BMI, BMD and femoral neck geometry, TyG-BMI, MOF, and HF. TyG-BMI was positively correlated with BMD. In men, TyG-BMI showed significant negative correlation with HF but not with MOF, the correlation exists only after adjusting for other variables in women. Femoral neck geometries were significantly impaired in individuals with low TyG-BMI. (4) Conclusion: TyG-BMI is positively associated with BMD and geometry, and negatively associated with risk of fracture in nondiabetic middle-aged and elderly Chinese men and women.

A deep learning-based approach to automatic proximal femur segmentation in quantitative CT images

Automatic CT segmentation of proximal femur has a great potential for use in orthopedic diseases, especially in the imaging-based assessments of hip fracture risk. In this study, we proposed an approach based on deep learning for the fast and automatic extraction of the periosteal and endosteal contours of proximal femur in order to differentiate cortical and trabecular bone compartments. A three-dimensional (3D) end-to-end fully convolutional neural network (CNN), which can better combine the information among neighbor slices and get more accurate segmentation results by 3D CNN, was developed for our segmentation task. The separation of cortical and trabecular bones derived from the QCT software MIAF-Femur was used as the segmentation reference. Two models with the same network structures were trained, and they achieved a dice similarity coefficient (DSC) of 97.82% and 96.53% for the periosteal and endosteal contours, respectively. Compared with MIAF-Femur, it takes half an hour to segment a case, and our CNN model takes a few minutes. To verify the excellent performance of our model for proximal femoral segmentation, we measured the volumes of different parts of the proximal femur and compared it with the ground truth, and the relative errors of femur volume between predicted result and ground truth are all less than 5%. This approach will be expected helpful to measure the bone mineral densities of cortical and trabecular bones, and to evaluate the bone strength based on FEA.

Cortical bone structure of the proximal femur and incident fractures

PURPOSE

Fracture risk is most frequently assessed using Dual X-ray absorptiometry to measure areal bone mineral density (aBMD) and using the Fracture Risk Assessment Tool (FRAX). However, these approaches have limitations and additional bone measurements may enhance the predictive ability of these existing tools. Increased cortical porosity has been associated with incident fracture in some studies, but not in others. In this prospective study, we examined whether cortical bone structure of the proximal femur predicts incident fractures independent of aBMD and FRAX score.

METHODS

We pooled 211 postmenopausal women with fractures aged 54-94 years at baseline and 232 fracture-free age-matched controls based on a prior nested case-control study from the Tromsø Study in Norway. We assessed baseline femoral neck (FN) aBMD, calculated FRAX 10-year probability of major osteoporotic fracture (MOF), and quantified femoral subtrochanteric cortical parameters: porosity, area, thickness, and volumetric BMD (vBMD) from CT images using the StrAx1.0 software. Associations between bone parameters and any incident fracture, MOF and hip fracture were determined using Cox's proportional hazard models to calculate hazard ratio (HR) with 95% confidence interval.

RESULTS

During a median follow-up of 7.2 years, 114 (25.7%) of 443 women suffered one or more incident fracture. Cortical bone structure did not predict any incident fracture or MOF after adjustment for age, BMI, and previous fracture. Each SD higher total cortical porosity, thinner cortices, and lower cortical vBMD predicted hip fracture with increased risk of 46-62% (HRs ranging from 1.46 (1.01-2.11) to 1.62 (1.02-2.57)). After adjustment for FN aBMD or FRAX score no association remained significant. Both lower FN aBMD and higher FRAX score predicted any incident fracture, MOF and hip fractures with HRs ranging from 1.45-2.56.

CONCLUSIONS

This study showed that cortical bone measurements using clinical CT did not add substantial insight into fracture risk beyond FN aBMD and FRAX. We infer from these results that fracture risk related to the deteriorated bone structure seems to be largely captured by a measurement of FN aBMD and the FRAX tool.

Differences in Hip Geometry Between Female Subjects With and Without Acute Hip Fracture: A Cross-Sectional Case-Control Study

BACKGROUND AND PURPOSE

Although it is widely recognized that hip BMD is reduced in patients with hip fracture, the differences in geometrical parameters such as cortical volume and thickness between subjects with and without hip fracture are less well known.

MATERIALS AND METHODS

Five hundred and sixty two community-dwelling elderly women with hip CT scans were included in this cross-sectional study, of whom 236 had an acute hip fracture. 326 age matched women without hip fracture served as controls. MIAF-Femur software was used for the measurement of the intact contralateral femur in patients with hip fracture and the left femur of the controls. Integral and cortical volumes (Vols) of the total hip (TH), femoral head (FH), femoral neck (FN), trochanter (TR) and intertrochanter (IT) were analyzed. In the FH and FN the volumes were further subdivided into superior anterior (SA) and posterior (SP) as well as inferior anterior (IA) and posterior (IP) quadrants. Cortical thickness (CortThick) was determined for all sub volumes of interest (VOIs) listed above.

RESULTS

The average age of the control and fracture groups was 71.7 and 72.0 years, respectively. The fracture patients had significantly lower CortThick and Vol of all VOIs except for TRVol. In the fracture patients, cortical thickness and volume at the FN were significantly lower in all quadrants except for cortical volume of quadrant SA (p= 0.635). Hip fracture patients had smaller integral FN volume and cross-sectional area (CSA) before and after adjustment of age, height and weight. With respect to hip fracture discrimination, cortical volume performed poorer than cortical thickness across the whole proximal femur. The ratio of Cort/TrabMass (RCTM), a measure of the internal distribution of bone, performed better than cortical thickness in discriminating hip fracture risk. The highest area under curve (AUC) value of 0.805 was obtained for the model that included THCortThick, FHVol, THRCTM and FNCSA.

CONCLUSION

There were substantial differences in total and cortical volume as well as cortical thickness between fractured and unfractured women across the proximal femur. A combination of geometric variables resulted in similar discrimination power for hip fracture risk as aBMD.

Predictive ability of novel volumetric and geometric indices derived from dual-energy X-ray absorptiometric images of the proximal femur for hip fracture compared with conventional areal bone mineral density: the Japanese Population-based Osteoporosis (JPOS) Cohort Study

Areal BMD (aBMD) from DXA is not a sufficiently accurate predictor of fracture. Novel volumetric BMD derived from 3D modeling of the hip from DXA images significantly improved the predictive ability for hip fracture relative to aBMD at the femoral neck, but not aBMD at the total hip.

INTRODUCTION

To clarify whether volumetric and geometric indices derived from novel three-dimensional (3D) modeling of the hip using dual-energy X-ray absorptiometric (DXA) images improve hip fracture prediction relative to areal bone mineral density (aBMD).

METHODS

We examined 1331 women who had completed the baseline survey and at least one follow-up survey over 20 years (age 40-79 years at baseline). Each survey included aBMD measurement at the hip by DXA. Volumetric and geometric indices of the hip at baseline and the 10-year follow-up were estimated from DXA images using a 3D modeling algorithm. Incident hip fractures during the 20-year follow-up period were identified through self-report. Cox proportional hazards regression models allowing for repeated measurements of predictors and outcomes were constructed, and their predictive ability for hip fracture was evaluated using areas under receiver operating characteristic curves (AUCs) and net reclassification improvement (NRI) over aBMD at the femoral neck (FN) and total hip (TH) as references.

RESULTS

During a median follow-up of 19.8 years, 68 incident hip fractures were identified (2.22/1000 person-years). A significantly larger AUC of trabecular volumetric BMD (vBMD) at the total hip (AUC = 0.741), femoral neck (AUC = 0.748), and intertrochanter (AUC = 0.738) and significant NRI (0.177, 0.149, and 0.195, respectively) were observed compared with FN-aBMD (AUC = 0.701), but not TH-aBMD.

CONCLUSIONS

vBMD obtained from 3D modeling using routinely obtained hip DXA images significantly improved hip fracture risk prediction over conventional FN-aBMD, but not TH-aBMD.

TRIAL REGISTRATION

The Japanese Population-Based Osteoporosis (JPOS) Cohort Study was retrospectively registered as UMIN000032869 in the UMIN Clinical Trials Registry on July 1, 2018.

Type 2 Diabetes and Change in Total Hip Bone Area and Bone Mineral Density in Swedish Men and Women Older Than 55 Years

CONTEXT

In a cross-sectional study, we found an association between type 2 diabetes mellitus (T2DM) and smaller bone area together with greater bone mineral density (BMD) at the total hip.

OBJECTIVE

This work aims to investigate these associations longitudinally, by studying T2DM status (no T2DM n = 1521, incident T2DM n = 119, or prevalent T2DM n = 106) in relation to changes in total hip bone area and BMD.

METHODS

In 3 cohorts, the Swedish Mammography Cohort Clinical (SMCC; n = 1060), Prospective Investigation of the Vasculature in Uppsala Seniors (PIVUS; n = 483), and Uppsala Longitudinal Study of Adult Men (ULSAM; n = 203), with repeat assessment of T2DM status and dual energy x-ray absorptiometry (DXA) measurements of total hip bone area and BMD on average 8 years apart, a linear regression model was used to assess the effect of T2DM status on change in bone area and BMD at the total hip.

RESULTS

After meta-analysis, the change in bone area at the total hip was 0.5% lower among those with incident T2DM compared to those without T2DM (-0.18 cm2; 95% CI, -0.30 to -0.06). The change in bone area was similar among those with prevalent T2DM compared to those without (0.00 cm2; 95% CI, -0.13 to 0.13). For BMD, the combined estimate was 0.004 g/cm2 (95% CI, -0.006 to 0.014) among those with incident T2DM and 0.010 g/cm2 (95% CI, -0.000 to 0.020) among those with prevalent T2DM, compared to those without T2DM.

CONCLUSION

Those with incident T2DM have a lower expansion in bone area at the total hip compared to those without T2DM.

Opportunistic CT screening predicts individuals at risk of major osteoporotic fracture

Millions of CT scans are performed annually and could be also used to opportunistically assess musculoskeletal health; however, it is unknown how well this secondary assessment relates to osteoporotic fracture. This study demonstrates that opportunistic CT screening is a promising tool to predict individuals with previous osteoporotic fracture.

INTRODUCTION

Opportunistic computed tomography (oCT) screening for osteoporosis and fracture risk determination complements current dual X-ray absorptiometry (DXA) diagnosis. This study determined major osteoporotic fracture prediction by oCT at the spine and hip from abdominal CT scans.

METHODS

Initial 1158 clinical abdominal CT scans were identified from administrative databases and were the basis to generate a cohort of 490 men and women with suitable abdominal CT scans. Participant CT scans met the following criteria: over 50 years of age, the scan had no image artifacts, and the field-of-view included the L4 vertebra and proximal femur. A total of 123 participants were identified as having previously suffered a fracture within 5 years of CT scan date. Fracture cause was identified from clinical data and used to create a low-energy fracture sub-cohort. At each skeletal site, bone mineral density (BMD) and finite element (FE)-estimated bone strength were determined. Logistic regression predicted fracture and receiver-operator characteristic curves analyzed prediction capabilities.

RESULTS

In participants with a fracture, low-energy fractures occurred in 88% of women and 79% of men. Fracture prediction by combining both BMD and FE-estimated bone strength was not statistically different than using either BMD or FE-estimated bone strength alone. Predicting low-energy fractures in women determined the greatest AUC of 0.710 by using both BMD and FE-estimated bone strength.

CONCLUSIONS

oCT screening using abdominal CT scans is effective at predicting individuals with previous fracture at major osteoporotic sites and offers a promising screening tool for skeletal health assessment.

Composite Indices of Femoral Neck Strength in Middle-Aged Inactive Subjects Vs Former Football Players

The purpose of this study was to compare composite indices of femoral neck strength ((compression strength index [CSI], bending strength index [BSI], and impact strength index [ISI]) in inactive middle-aged men (n = 20) and middle-aged former football players (n = 15). 35 middle-aged men participated in this study. Body composition and bone variables were evaluated by dual-energy X-ray absorptiometry. Composite indices of femoral neck strength (CSI, BSI, and ISI) were calculated. Handgrip strength, vertical jump, maximum power of the lower limbs (watts), horizontal jump, maximal half-squat strength, maximal bench-press strength, sprint performance (10 meters), and maximum oxygen consumption (VO₂ max, ml/min/kg) were evaluated using validated tests. CSI, BSI, and ISI were significantly higher in football players compared to inactive men. Vertical jump, horizontal jump, maximal half-squat strength, VO₂ max and sprint performance were significantly different between the 2 groups. CSI, BSI, and ISI remained significantly higher in football players compared to inactive men after adjusting for physical activity level. The current study suggests that former football practice is associated with higher composite indices of femoral neck strength in middle-aged men.

Finite element analysis informed variable selection for femoral fracture risk prediction

Logistic regression classification (LRC) is widely used to develop models to predict the risk of femoral fracture. LRC models based on areal bone mineral density (aBMD) alone are poor, with area under the receiver operator curve (AUROC) scores reported to be as low as 0.63. This has led to researchers investigating methods to extract further information from the image to increase performance. Recently, the use of active shape (ASM) and appearance models (AAM) have resulted in moderate improvements, but there is a risk that inclusion of too many modes will lead to overfitting. In addition, there are concerns that the effort required to extract the additional information does not justify the modest improvement in fracture risk prediction. This raises the question, are we reaching the limits of the information that can be extracted from an image? Finite element analysis was used in combination with active shape and appearance modelling to select variables to develop LRC models of fracture risk. Active shape and active appearance models were constructed based on a previously reported cohort of 94 post-menopausal Caucasian women (47 with and 47 without a fracture). T-tests were used to identify differences between the two groups for each mode of variation. Femur strength was predicted for two load cases, stance and a fall. Stepwise multi-variate linear regression was used to identify shape and appearance modes that were predictors of strength for the femurs in the training set. Femurs were also synthetically generated to explore the influence of the first 10 modes of the shape and appearance models. Identified modes of variation were then used to generate LRC models to predict fracture risk. Only 6 modes, 4 active appearance and 2 active shape modes, were identified that had a significant influence on predicted fracture strength. Of these, only two active appearance modes were needed to substantially improve the predictive mode performance (ΔAUROC = 0.080). The addition of 3 more modes (1 AAM and two ASM) further improved the performance of the classifier (ΔAUROC = 0.123). Further addition of modes did not result in any further substantial improvements. Based on these findings, it is suggested that we are reaching the limits of the information that can be extracted from an image to predict fracture risk.

In vivo quantification of bone mineral density of lumbar vertebrae using fast kVp switching dual-energy CT: correlation with quantitative computed tomography

Background

Osteoporosis is a common, progressive disease related to low bone mineral density (BMD). If it can be diagnosed at an early stage, osteoporosis is treatable. Quantitative computed tomography (QCT) is one of the current reference standards of BMD measurement, but dual-energy computed tomography (DECT) is considered to be a potential alternative. This study aimed to evaluate the feasibility and accuracy of phantomless in vivo DECT-based BMD quantification in comparison with QCT.

Methods

A total of 128 consecutive participants who underwent DECT lumbar examinations between July 2018 and February 2019 were retrospectively analyzed. The density of calcium (water), hydroxyapatite (water), calcium (fat), and hydroxyapatite (fat) [D_Ca(Wa), D_HAP(Wa), D_Ca(Fat) and D_HAP(Fat), respectively] were measured along with BMD in the trabecular bone of lumbar level 1-2 by DECT and QCT. Linear regression analysis was performed to assess the relationship between DECT- and QCT-derived BMD at both the participant level and the vertebral level. Linear regression models were quantitatively evaluated with adjusted R-square, normalized mean squared error (NMSE) and relative error (RE). Bland-Altman analysis was conducted to assess agreement between measurements. P<0.05 was considered statistically significant.

Results

Strong correlations were observed between DECT- and QCT-derived BMD at both the participant level and the vertebral level (adjusted R² =0.983-0.987; NMSE = 1.6-2.1%; RE_linear =0.6-0.9%). Bland-Altman plots indicated high agreement between both measurements. D_Ca(Fat) and D_HAP(Fat) showed relatively similar and optimal predictive capability for QCT-derived BMD (both: adjusted R² =0.987, NMSE =1.6%, RE_linear =0.6%).

Conclusions

Fast kVp switching DECT enabled accurate phantomless in vivo BMD quantification of the lumbar spine. D_Ca(Fat) and D_HAP(Fat) had relatively similar and optimal predictive capability.

Influence of Physical Activity Level on Composite Indices of Femoral Neck Strength in a Group of Young Overweight Men

The aim of the present study was to explore the influence of physical activity level on composite indices of femoral neck strength (compression strength index [CSI], bending strength index, and impact strength index) in a group of young overweight men. To do so, we compared composite indices of femoral neck strength in active overweight men and insufficiently active overweight men. They were divided into 2 groups based on their physical activity level: 70 active overweight men (engaging in more than 150 minutes of physical activity per week; 8.7 ± 4.8 h/wk) and 26 insufficiently active overweight men (engaging in less than 150 minutes of physical activity per week; 1.2 ± 0.7 h/wk). Height (m) and weight (kg) were measured, and body mass index (kg/m²) was calculated. Bone mineral density was measured by dual-energy X-ray absorptiometry at whole body, lumbar spine, total hip, and femoral neck. Body weight, lean mass, fat mass, and body mass index were not significantly different between the 2 groups. CSI, bending strength index, and impact strength index were significantly higher in active overweight men compared to insufficiently active overweight men. After adjustment for age, physical activity (h/wk) and lean mass, only CSI remained higher in active overweight men compared to insufficiently active overweight men. This study suggests that, in young overweight men, being active (engaging in more than 150 minutes of physical activity per week) is associated with greater composite indices of femoral neck strength. To our knowledge, this is the first study that finds a significant difference regarding composite indices of femoral neck strength between 2 groups of young overweight men with different levels of physical activity.

Preparation of BMP-2 loaded MPEG-PCL microspheres and evaluation of their bone repair properties

Autologous or allogeneic bone grafts are common methods to treat bone defects. Bone tissue engineering combining carrier material with the active factor can induce a generation of new bone at the bone defect site. However, its clinical application is restricted by the limited donors, the high morbidity at the donor site, the low activity in vivo, and dose-independent adverse effect. To overcome the limitations of traditional therapies, it is urgent to find and develop a repair material that can replace natural bones. Hence, we designed and prepared suitable MPEG-PCL microspheres loaded bone morphogenetic protein-2 (BMP-2/MPEG-PCL-MS) to effectively solve the problem mentioned above, prolong its reaction time at the targeted site, and avoid the pain of patients caused by frequent administration. The physicochemical properties and in vitro release behaviors were good. The microspheres showed high biocompatibility and strongly induced osteogenesis in vivo. BMP-2/MPEG-PCL-MS has been proven to exert sustained-release in vivo and maintain the inherent BMP-2 activity. They can be directly injected into the bone defect site, or implanted to a large bone defect site together with stent material to exert therapeutic effects. Hence, this smart drug delivery system has promising potential for clinical applications and provides a well-controlled design for combination of tissue engineering and pharmaceutics for further exploration.

Association of abductor hip muscle atrophy with fall-related proximal femur fractures in the elderly

OBJECTIVE

The purpose of this study was to evaluate an association between fall-related intertrochanteric or femoral neck fractures and gluteus medius and minimus atrophy, furthermore, to find a correlation of whether any difference between femoral neck or intertrochanteric fracture and degree of muscle atrophy MATERIALS AND METHODS: A retrospective review of 230 patients with intertrochanteric or femoral neck fracture, aged > 65 years, and 60 age- matched controls was performed. We assessed gluteus medius and minimus atrophy and calculated the cross-sectional area (CSA) and ratio of lean muscle to adipose infiltration (M/A ratio) for each muscle.

RESULTS

The atrophy scores for the g.medius and g.minimus muscles on the fractured side were significantly higher than scores on the healthy side and scores in the control group. The atrophy scores for the g.medius on the healthy side were not significantly different from scores in the control group. The atrophy scores for g.medius were significantly different between the fractured side and the healthy side for all ages, the atrophy scores for g.minimus was significantly different in the patients aged over 75. There was no significant difference in the following parameters between the fractured side and healthy side of the patients aged 65 - 75 years; the atrophy score, CSA and M/A ratio. The patients have a lower CSA and M/A ratio on the fractured side than on the healthy side and lower CSA and M/A ratio than in the control group. However, there were no significant differences in the M/A ratio between the healthy side and the control group. CSA was not significantly different between the fractured side and healthy side in the male patients and in the patients with lower BMI (<30). There was no significant difference in the atrophy scores between subjects with intertrochanteric versus femoral neck fractures, the CSAs of the g.medius and g.minimus were significantly different between the intertrochanteric fracture and femoral neck fracture groups.

CONCLUSIONS

The fractured sides showed greater g.medius and g.minimus muscle atrophy, which may be a predictor of fall-related hip fractures in the elderly. Gluteal muscle volume may be associated with proximal femur fracture subtype.

DXA-Based 3D Analysis of the Cortical and Trabecular Bone of Hip Fracture Postmenopausal Women: A Case-Control Study

Methods using statistical shape and appearance models have been proposed to analyze bone mineral density (BMD) in 3D from dual energy X-ray absorptiometry (DXA) scans. This paper presents a retrospective case-control study assessing the association of DXA-derived 3D measurements with osteoporotic hip fracture in postmenopausal women. Patients who experienced a hip fracture between 1 and 6 years from baseline and age-matched controls were included in this study. The 3D-SHAPER software (version 2.7, Galgo Medical, Barcelona, Spain) was used to derive 3D analysis from hip DXA scans at baseline. DXA and 3D measurements were compared between groups. Total hip areal BMD of hip fracture group as measured by DXA was 10.7% lower compared to control group. Differences in volumetric BMD (total hip) as measured by 3D-SHAPER were more pronounced in the trabecular compartment (-23.3%) than in the cortex (-8.2%). The area under the receiver operating curve was 0.742 for trabecular volumetric BMD, 0.706 for cortical volumetric BMD, and 0.712 for total hip areal BMD. Differences in the cortex were locally more pronounced at the medial aspect of the shaft, the lateral aspect of the greater trochanter, and the superolateral aspect of the neck. Marked differences in volumetric BMD were observed in the greater trochanter. This case-control study showed the association of DXA-derived 3D measurements with hip fracture. Analysis of large cohorts will be performed in future work to determine if DXA-derived 3D measurements could improve fracture risk prediction in clinical practice.

Effects of supervised high-intensity resistance and impact training or machine-based isometric training on regional bone geometry and strength in middle-aged and older men with low bone mass: The LIFTMOR-M semi-randomised controlled trial

INTRODUCTION

Few data exist on the effects of bone-targeted exercise on geometric and biomechanical indices of bone strength in men. The Lifting Intervention For Training Muscle and Osteoporosis Rehabilitation for Men (LIFTMOR-M) trial was designed to compare the efficacy and safety of two novel, supervised, twice-weekly, high-intensity exercise programs in middle-aged and older men with osteopenia and osteoporosis on musculoskeletal health and risk factors related to falls and fractures. The current report includes secondary outcomes of the LIFTMOR-M exercise intervention trial.

PURPOSE

Our goal was to determine the effects of two supervised, twice-weekly, high-intensity exercise programs on bone geometry and strength of the proximal femur, and distal and proximal sites of the tibia and radius in middle-aged and older men with osteopenia and osteoporosis.

METHODS

Generally-healthy men (≥45 years), with low lumbar spine (LS) and/or proximal femur areal bone mineral density (aBMD), were recruited from the community. Eligible participants were randomised to either eight months of twice-weekly supervised high-intensity progressive resistance and impact training (HiRIT) or supervised machine-based isometric axial compression (IAC) exercise training. Intervention group outcomes were compared at baseline and eight months with a matched but non-randomised control group (CON) who self-selected to usual activities. DXA scans (Medix DR, Medilink, France) of the skeletally non-dominant proximal femur were analysed using 3D hip software (DMS Group, France) to derive femoral neck (FN) and total hip (TH) bone mineral content (BMC), volume, and volumetric bone mineral density (vBMD) for total, trabecular and cortical bone compartments. Total FN cortical thickness was determined as well as anterior, posterior, lateral and medial subregions. pQCT scans (XCT-3000, Stratec, Germany) of the 4 and 38% sites of the tibia, and 4 and 66% sites of the radius were conducted to determine a range of geometric and bone structural strength indices. Intervention effects were examined using univariate ANCOVA of percent change, and repeated measures ANCOVA of raw baseline and follow-up data, controlling for initial values, using intention-to-treat and per-protocol approaches.

RESULTS

Ninety-three men (67.1 ± 7.5 yrs, 175.2 ± 6.7 cm, 82.1 ± 11.6 kg, 26.7 ± 3.5 kg/m²) with lower than average aBMD (LS T-score -0.06 ± 1.04, FN T-score -1.58 ± 0.58, TH T-score -1.00 ± 0.58) were recruited, and designated CON (n = 26) or randomised to HiRIT (n = 34) or IAC (n = 33). Compliance to the supervised exercise programs did not differ (HiRIT 77.8 ± 16.6% versus IAC 78.5 ± 14.8%, p = 0.872). HiRIT improved medial FN cortical thickness compared with CON (5.6 ± 1.7% versus -0.1 ± 1.9%, p = 0.028) and IAC (5.6 ± 1.7% versus 0.7 ± 1.7%, p = 0.044). Distal tibia total BMC, vBMD, area and bone strength index, and trabecular BMC and bone strength index all declined for CON compared with maintenance for both HiRIT and IAC (all p < 0.05). HiRIT maintained distal tibia trabecular area compared with a loss in CON (0.2 ± 0.5% versus -1.6 ± 0.5%, p = 0.013). HiRIT and IAC maintained distal radius total BMC compared with loss in CON (-0.1 ± 0.7% versus -3.7 ± 0.8%, p = 0.001; 1.3 ± 0.7% versus -3.7 ± 0.8%, p < 0.001, respectively). HiRIT and IAC maintained distal radius total bone strength index compared with loss in CON (1.4 ± 1.4% versus -6.0 ± 1.6%, p = 0.001; 0.2 ± 1.3% versus -6.0 ± 1.6%, p = 0.004, respectively). HiRIT reduced proximal radius cortical area compared with CON (-3.1 ± 1.0% versus 1.1 ± 1.2%, p = 0.011) and IAC (-3.1 ± 1.0% versus -0.2 ± 1.0%, p = 0.042). No between-group differences were detected in any pQCT-derived bone outcome at the diaphyseal tibia 38% site.

CONCLUSION

Findings indicate that supervised HiRIT provides a positive stimulus to cortical bone at the medial FN compared with supervised IAC exercise, and both HiRIT and IAC preserve bone strength at the distal tibia and distal radius. These effects may translate into a reduced risk of lower and upper extremity fracture in middle-aged and older men with low bone mass.

Biomechanical Computed Tomography analysis (BCT) for clinical assessment of osteoporosis

The surgeon general of the USA defines osteoporosis as "a skeletal disorder characterized by compromised bone strength, predisposing to an increased risk of fracture." Measuring bone strength, Biomechanical Computed Tomography analysis (BCT), namely, finite element analysis of a patient's clinical-resolution computed tomography (CT) scan, is now available in the USA as a Medicare screening benefit for osteoporosis diagnostic testing. Helping to address under-diagnosis of osteoporosis, BCT can be applied "opportunistically" to most existing CT scans that include the spine or hip regions and were previously obtained for an unrelated medical indication. For the BCT test, no modifications are required to standard clinical CT imaging protocols. The analysis provides measurements of bone strength as well as a dual-energy X-ray absorptiometry (DXA)-equivalent bone mineral density (BMD) T-score at the hip and a volumetric BMD of trabecular bone at the spine. Based on both the bone strength and BMD measurements, a physician can identify osteoporosis and assess fracture risk (high, increased, not increased), without needing confirmation by DXA. To help introduce BCT to clinicians and health care professionals, we describe in this review the currently available clinical implementation of the test (VirtuOst), its application for managing patients, and the underlying supporting evidence; we also discuss its main limitations and how its results can be interpreted clinically. Together, this body of evidence supports BCT as an accurate and convenient diagnostic test for osteoporosis in both sexes, particularly when used opportunistically for patients already with CT. Biomechanical Computed Tomography analysis (BCT) uses a patient's CT scan to measure both bone strength and bone mineral density at the hip or spine. Performing at least as well as DXA for both diagnosing osteoporosis and assessing fracture risk, BCT is particularly well-suited to "opportunistic" use for the patient without a recent DXA who is undergoing or has previously undergone CT testing (including hip or spine regions) for an unrelated medical condition.

Proximal femur lag screw placement based on bone mineral density determined by quantitative computed tomography

Following internal fixations for intertrochanteric fractures in elderly patients, lag screws or screw blades frequently cut the femoral head, leading to surgical failure. The bone mineral density (BMD) at various parts of the proximal femur is significantly correlated with the holding force of the lag screw, which in turn is closely associated with the stability of the fixation. However, the appropriate placement of the lag screw has been controversial. As a novel detection method for BMD, quantitative computed tomography (QCT) may provide relatively accurate measurements of three-dimensional structures and may provide an easy way to determine the appropriate lag screw placement. A total of 50 elderly patients with intertrochanteric fractures were selected for the present study. The BMD of the proximal femur on the healthy side, including the femoral intertrochanter, neck and head, was measured using QCT. For testing, the femoral head was divided into medial, central and lateral sections. The BMD of the femoral head was determined to be the highest, while the BMD of the femoral neck was the lowest. In the femoral head, the central section had the highest BMD, while the lateral section had the lowest BMD. The present study used QCT to detect differences in the BMD at various regions of the proximal femur and provided a novel theoretical reference for the placement of lag screws. To obtain maximum holding power, the lag screw must be placed in the central section of the femoral head.

MRI-based assessment of proximal femur strength compared to mechanical testing

Half of the women who sustain a hip fracture would not qualify for osteoporosis treatment based on current DXA-estimated bone mineral density criteria. Therefore, a better approach is needed to determine if an individual is at risk of hip fracture from a fall. The objective of this study was to determine the association between radiation-free MRI-derived bone strength and strain simulations compared to results from direct mechanical testing of cadaveric femora. Imaging was conducted on a 3-Tesla MRI scanner using two sequences: one balanced steady-state free precession sequence with 300 μm isotropic voxel size and one spoiled gradient echo with anisotropic voxel size of 234 × 234 × 1500 μm. Femora were dissected free of soft-tissue and 4350-ohm strain-gauges were securely applied to surfaces at the femoral shaft, inferior neck, greater trochanter, and superior neck. Cadavers were mechanically tested with a hydraulic universal test frame to simulate loading in a sideways fall orientation. Sideways fall forces were simulated on MRI-based finite element meshes and bone stiffness, failure force, and force for plastic deformation were computed. Simulated bone strength metrics from the 300 μm isotropic sequence showed strong agreement with experimentally obtained values of bone strength, with stiffness (r = 0.88, p = 0.0002), plastic deformation point (r = 0.89, p < 0.0001), and failure force (r = 0.92, p < 0.0001). The anisotropic sequence showed similar trends for stiffness, plastic deformation point, and failure force (r = 0.68, 0.70, 0.84; p = 0.02, 0.01, 0.0006, respectively). Surface strain-gauge measurements showed moderate to strong agreement with simulated magnitude strain values at the greater trochanter, superior neck, and inferior neck (r = -0.97, -0.86, 0.80; p ≤0.0001, 0.003, 0.03, respectively). The findings from this study support the use of MRI-based FE analysis of the hip to reliably predict the mechanical competence of the human femur in clinical settings.

Use of Quantitative Computed Tomography to Assess for Clinically-relevant Skeletal Effects of Prolonged Spaceflight on Astronaut Hips

INTRODUCTION

In 2010, experts in osteoporosis and bone densitometry were convened by the Space Life Sciences Directorate at NASA Johnson Space Center to identify a skeletal outcome in astronauts after spaceflight that would require a clinical response to address fracture risk. After reviewing astronaut data, experts expressed concern over discordant patterns in loss and recovery of bone mineral density (BMD) after spaceflight as monitored by dual-energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT). The pilot study described herein demonstrates the use of QCT to evaluate absence of recovery in hip trabecular BMD by QCT as an indicator of a clinically actionable response.

METHODOLOGY

QCT and DXA scans of both hips were performed on 10 astronauts: once preflight and twice postflight about 1 wk and 1 yr after return. If trabecular BMD had not returned to baseline (i.e., within QCT measurement error) in 1 or both hips 1 yr after flight, then another QCT hip scan was obtained at 2 yr after flight.

RESULTS

Areal BMD by DXA recovered in 9 of 10 astronauts at 1 yr postflight while incomplete recovery of trabecular BMD by QCT was evident in 5 of 10 astronauts and persisted in 4 of the 5 astronauts 2 yr postflight.

CONCLUSION

As an adjunct to DXA, QCT is needed to detect changes to hip trabecular BMD after spaceflight and to confirm complete recovery. Incomplete recovery at 2 yr should trigger the need for further evaluation and possible intervention to mitigate premature fragility and fractures in astronauts following long-duration spaceflight.

CTXA hip: the effect of partial volume correction on volumetric bone mineral density data for cortical and trabecular bone

This study compares the results of computed tomography X-ray absorptiometry (CTXA) hip volumetric BMD (vBMD) analyses of cortical and trabecular bone with and without partial volume correction. For cortical bone in some circumstances, corrected cortical volumes were negative and corrected vBMD was very high. For trabecular bone, the correction effects are smaller. CTXA volumetric data should be interpreted with caution.

PURPOSE

Previous studies have reported concerns about the reliability of CTXA hip cortical vBMD measurements generated using partial volume (PV) correction (the "default" analysis, with cortical PV correction). To date, no studies have examined the results of the alternative ("new") analysis (with trabecular PV correction). This study presents in vivo and phantom data comparing the corrected and uncorrected data for cortical and trabecular bone respectively.

METHODS

We used the commercial QCTPro CTXA software to analyze CT scans of 129 elderly Chinese men and women and an anthropomorphic European Proximal Femur phantom (EPFP) and accessed data for two alternative scan analyses using the database dump utility. The CTXA software gives the user two methods of performing the PV correction: (1) a default analysis in which only cortical bone results are corrected; (2) a new analysis in which only trabecular bone results are corrected. Both methods are based on a numerical recalculation of vBMD values without any change in volume of interest (VOI) placement.

RESULT

In vivo, the results of the two analyses for integral bone were the same while cortical and trabecular results were different. PV correction of cortical bone led to a decrease of cortical volume for all four VOIs: total hip (TH), femoral neck (FN), trochanter (TR), and intertrochanter (IT) volumes were reduced on average by 7.8 cm³, 0.9 cm³, 2.5 cm³, and 4.3 cm³ respectively. For TR, where cortex was thinnest, average corrected cortical volume was negative (- 0.4± 1.3 cm³). Corrected cortical vBMD values were much larger than uncorrected ones for TH, FN, and IT. Scatter plots of corrected cortical vBMD against cortical bone thickness showed that elevated results correlated with thinner cortices. When trabecular bone was corrected for the PV effect, trabecular volumes of TH, FN, TR, and IT were reduced on average by 7.9 cm³, 0.8 cm³, 2.6 cm³, and 4.4 cm³ respectively, while vBMD measurements were increased correspondingly. The trabecular volume and vBMD measurements of the two datasets both had highly positive correlations. For the EPFP, the PV-corrected FN data deviated from the nominal phantom value, but was closer for the TR and IT VOIs. Both corrected and uncorrected data overestimated trabecular vBMD, with the corrected results showing greater deviation from nominal values.

CONCLUSION

The default and new CTXA analyses for volumetric data generate different results, both for cortical and trabecular bone. For cortical bone, the uncorrected results are subject to partial volume effects but the correction method of the default analysis overcorrects the effect leading to in part unreasonable results for cortical bone volume and BMD. For trabecular bone, the correction effects are smaller. CTXA volumetric data should be interpreted with caution.

The impact of degenerative disc disease on regional volumetric bone mineral density (vBMD) measured by quantitative computed tomography

BACKGROUND CONTEXT

It has been reported that degenerative disc disease (DDD) is associated with higher spinal bone mineral density (BMD) based on previous studies that used dual X-ray absorptiometry (DXA). However, DDD is often associated with proliferative bone changes and can lead to an overestimation of BMD measured with DXA. Trabecular volumetric BMD (vBMD) in the vertebral body measured with quantitative computed tomography (QCT) is less affected by those changes and can be a favorable alternative to DXA for patients with degenerative spinal changes.

PURPOSE

The purpose of this study is to investigate the effect of DDD on regional trabecular vBMDs in the vertebral body measured by QCT.

STUDY DESIGN/SETTING

Cross-sectional observational study at a single academic institution.

PATIENTS SAMPLE

Consecutive patients undergoing posterior lumbar spinal fusion between 2014 and 2017 who had a routine preoperative CT scan and magnetic resonance imaging (MRI) within a 90-day interval.

OUTCOME MEASURES

Regional trabecular vBMDs in the vertebral body by QCT.

METHODS

QCT measurements were conducted in L1-S1 vertebral trabecular bone. Any apparent sclerotic lesions that might affect vBMD values were excluded from the region of interest. The vBMDs of each level were defined as the average vBMD of the upper and lower vertebrae. To evaluate DDD, Pfirrmann grade, Modic grade, total end plate score, and vacuum phenomenon were documented. Univariate regression analysis and multivariate analyses with a linear mixed model adjusted with individual variability of segmental vBMDs were conducted with vBMD as the response variable.

RESULTS

Of 143 patients and 715 disc levels, 125 patients and 596 discs met our inclusion criteria. Mean vBMD (±standard deviation [SD]) of all levels was 119.0±39.6 mg/cm³. After adjusting for all covariates, Pfirrmann grade was not an independent contributor to vBMD, but the presence of any Modic change (type 1, β=6.8, p≤.001; type 2, β=6.7, p<.001; type 3, β=43.6, p<.001), high TEPS (score 10-12, β=14.2, p<.001), or vacuum phenomenon (β=9.0, p<.001) was shown to be independent contributors to vBMD.

CONCLUSIONS

Our results showed that the presence of certain end plate lesions (Modic changes and high TEPS) on MRI was significantly associated with increased regional QCT-vBMDs in the vertebral body, but no significant association was observed with disc nucleus pathology, unless it was associated with a vacuum phenomenon. When end plate lesions with Modic changes and high TEPS are present at the measuring level, care must be taken to interpret vBMD values, which might be overestimations even if the trabecular area appears normal.

Associations of Serum Cathepsin K and Polymorphisms in CTSK Gene With Bone Mineral Density and Bone Metabolism Markers in Postmenopausal Chinese Women

Cathepsin K plays an important role in bone resorption. The reports of the association of serum cathepsin K with bone mineral density (BMD) and bone turnover markers are conflicting and the role of serum cathepsin K as a bone turnover marker is unclear. The aims of the study were as follows: (1) to investigate the association of serum cathepsin K with BMD and markers of bone turnover and (2) to evaluate the correlations of single-nucleotide polymorphisms (SNPs) within the CTSK gene with serum cathepsin K, BMD, and markers of bone metabolism in postmenopausal Chinese women. A cross-sectional study was conducted with 1752 postmenopausal Chinese women. Four tagging SNPs (rs12085336, rs12746973, rs4379678, and rs10847) of the CTSK gene were genotyped. Serum cathepsin K of 768 and markers of bone metabolism of 1752 including serum intact PTH, 25-hydroxyvitamin D [25(OH)D], procollagen type 1 N-terminal propeptide (P1NP), and β-CrossLaps of type I collagen containing cross- linked C-telopeptide (β-CTX) were measured. The BMD of the lumbar spine and proximal femur were measured by dual-energy X-ray absorptiometry (DXA). No significant relationship was detected between serum cathepsin K and age, BMI, BMD or bone metabolic markers (all P > 0.05) after adjustment for age and BMI. We failed to identify any significant association between the genotypes or haplotypes of CTSK and BMD, bone turnover markers, or serum cathepsin K. Neither serum cathepsin K nor CTSK gene polymorphisms was correlated with BMD or bone turnover markers. Genetic polymorphisms of CTSK may not be a major contributor to variations in the serum cathepsin K or BMD in postmenopausal Chinese women. The results implied that serum cathepsin K may not be viewed as a substitute for bone turnover markers.

Explicit Finite Element Models Accurately Predict Subject-Specific and Velocity-Dependent Kinetics of Sideways Fall Impact

The majority of hip fractures in the elderly are the result of a fall from standing or from a lower height. Current injury models focus mostly on femur strength while neglecting subject-specific loading. This article presents an injury modeling strategy for hip fractures related to sideways falls that takes subject-specific impact loading into account. Finite element models (FEMs) of the human body were used to predict the experienced load and the femoral strength in a single model. We validated these models for their predicted peak force, effective pelvic stiffness, and fracture status against matching ex vivo sideways fall impacts (n = 11) with a trochanter velocity of 3.1 m/s. Furthermore, they were compared to sideways impacts of volunteers with lower impact velocities that were previously conducted by other groups. Good agreement was found between the ex vivo experiments and the FEMs with respect to peak force (root mean square error [RMSE] = 10.7%, R² = 0.85) and effective pelvic stiffness (R² = 0.92, RMSE = 12.9%). The FEMs were predictive of the fracture status for 10 out of 11 specimens. Compared to the volunteer experiments from low height, the FEMs overestimated the peak force by 25% for low BMI subjects and 8% for high BMI subjects. The effective pelvic stiffness values that were derived from the FEMs were comparable to those derived from impacts with volunteers. The force attenuation from the impact surface to the femur ranged between 27% and 54% and was highly dependent on soft tissue thickness (R² = 0.86). The energy balance in the FEMS showed that at the time of peak force 79% to 93% of the total energy is either kinetic or was transformed to soft tissue deformation. The presented FEMs allow for direct discrimination between fracture and nonfracture outcome for sideways falls and bridge the gap between impact testing with volunteers and impact conditions representative of real life falls. © 2019 American Society for Bone and Mineral Research.

Hip Fracture Discrimination Based on Statistical Multi-parametric Modeling (SMPM)

Studies using quantitative computed tomography (QCT) and data-driven image analysis techniques have shown that trabecular and cortical volumetric bone mineral density (vBMD) can improve the hip fracture prediction of dual-energy X-ray absorptiometry areal BMD (aBMD). Here, we hypothesize that (1) QCT imaging features of shape, density and structure derived from data-driven image analysis techniques can improve the hip fracture discrimination of classification models based on mean femoral neck aBMD (Neck.aBMD), and (2) that data-driven cortical bone thickness (Ct.Th) features can improve the hip fracture discrimination of vBMD models. We tested our hypotheses using statistical multi-parametric modeling (SMPM) in a QCT study of acute hip fracture of 50 controls and 93 fragility fracture cases. SMPM was used to extract features of shape, vBMD, Ct.Th, cortical vBMD, and vBMD in a layer adjacent to the endosteal surface to develop hip fracture classification models with machine learning logistic LASSO. The performance of these classification models was evaluated in two aspects: (1) their hip fracture classification capability without Neck.aBMD, and (2) their capability to improve the hip fracture classification of the Neck.aBMD model. Assessments were done with 10-fold cross-validation, areas under the receiver operating characteristic curve (AUCs), differences of AUCs, and the integrated discrimination improvement (IDI) index. All LASSO models including SMPM-vBMD features, and the majority of models including SMPM-Ct.Th features performed significantly better than the Neck.aBMD model; and all SMPM features significantly improved the hip fracture discrimination of the Neck.aBMD model (Hypothesis 1). An interesting finding was that SMPM-features of vBMD also captured Ct.Th patterns, potentially explaining the superior classification performance of models based on SMPM-vBMD features (Hypothesis 2). Age, height and weight had a small impact on model performances, and the model of shape, vBMD and Ct.Th consistently yielded better performances than the Neck.aBMD models. Results of this study clearly support the relevance of bone density and quality on the assessment of hip fracture, and demonstrate their potential on patient and healthcare cost benefits.

QCT of the femur: Comparison between QCTPro CTXA and MIAF Femur

QCT is commonly employed in research studies and clinical trials to measure BMD at the proximal femur. In this study we compared two analysis software options, QCTPro CTXA and MIAF-Femur, using CT scans of the semi-anthropometric European Proximal Femur Phantom (EPFP) and in vivo data from 130 Chinese elderly men and women aged 60-80 years. Integral (Int), cortical (Cort) and trabecular (Trab) vBMD, volume, and BMC of the neck (FN), trochanter (TR), inter-trochanter (IT), and total hip (TH) VOIs were compared. Accuracy was determined in the 5 mm wide central portion of the femoral neck of the EPFP. Nominal values were: cross-sectional area (CSA) 4.9 cm², cortical thickness (C.Th) 2 mm, CortBMD 723 mg/cm³ and TrabBMD 100 mg/cm³. In MIAF the so-called peeled trabecular VOI was analyzed, which excludes subcortical bone to avoid partial volume artefacts at the endocortical border that artificially increase TrabBMD. For CTXA uncorrected, so called raw cortical values were used for the analysis. QCTPro and MIAF phantom results were: CSA 5.9 cm² versus 5.1 cm²; C.Th 1.68 mm versus 1.92 mm; CortBMD 578 mg/cm³ versus 569 mg/cm³; and TrabBMD 154 mg/cm³ versus 104 mg/cm³. In vivo correlations (R²) of integral and trabecular bone parameters ranged from 0.63 to 0.96. Bland-Altman analysis for TH and FN TrabBMD showed that lower mean values were associated with higher differences, which means that TrabBMD differences between MIAF and CTXA are larger for osteoporotic than for normal patients, which can be largely explained by the inclusion of subcortical BMD in the trabecular VOI analyzed by CTXA in combination with fixed thresholds used to separate cortical from trabecular bone compartments. Correlations between CTXA corrected CortBMD and MIAF were negative, whereas raw data correlated positively with MIAF measurements for all VOIs questioning the validity of the CTXA corrections. The EPFP results demonstrated higher MIAF accuracy of cortical thickness and TrabBMD. Integral and trabecular bone parameters were highly correlated between CTXA and MIAF. Partial volume artefacts at the endocortical border artificially increased trabecular BMD by CTXA, especially for osteoporosis patients. With respect to volumetric cortical measurements with CTXA, the use raw data is recommended, because corrected data cause a negative correlation with MIAF CortBMD.

Type 2 Diabetes in Relation to Hip Bone Density, Area, and Bone Turnover in Swedish Men and Women: A Cross-Sectional Study

Men and women with type 2 diabetes mellitus (T2DM) have higher risk of hip fracture, but the mechanisms are not fully understood. We aimed to investigate how T2DM, glucose, and insulin were associated with femoral bone mineral density (BMD), bone mineral area (BMA), and bone turnover markers. We used two cross-sectional cohorts: the Uppsala Longitudinal Study of Adult Men (ULSAM, n = 452, mean age 82 years) and the Swedish Mammography Cohort Clinical (SMCC, n = 4713, mean age 68 years). We identified men and women with normal fasting glucose (NFG), impaired fasting plasma glucose (IFG), and T2DM. BMD and BMA at the total hip and femoral shaft were measured using dual energy X-ray absorptiometry (DXA). Bone turnover markers; CrossLaps and osteocalcin were measured in women. Linear regression models were applied. Men and women showed a progressively higher BMD following the clinical cutoffs of fasting glucose from NFG to IFG to T2DM. In contrast, there was a progressively lower BMA. Men and women with T2DM, compared to those with NFG, had lower BMA at the total hip (- 1.7%; 95% CI - 3.2, - 0.2 and - 1.0%; 95% CI - 1.6, - 0.4) and the femoral shaft (- 2.0%; 95% CI - 3.5, - 0.4 and - 0.6%; 95% CI - 1.2, - 0.01), respectively. T2DM was associated with lower concentrations of CrossLaps (- 8.1%; 95% CI - 12.7, - 3.6) and osteocalcin (- 15.2%; 95% CI - 19.0, - 11.2). These cross-sectional results indicate that those with T2DM have smaller bone area and lower bone turnover, which could increase the risk of hip fracture.

Effects of osteoporosis drug treatments on cortical and trabecular bone in the femur using DXA-based 3D modeling

Effects of osteoporosis drugs on proximal femur cortical and trabecular bone were studied using dual-energy x-ray absorptiometry (DXA)-based 3D modeling method. Changes observed in this head-to-head study were consistent with those obtained using computed tomography in the literature.

INTRODUCTION

The aim of the present study was to assess the effects of osteoporosis drugs on cortical and trabecular bone at the proximal femur using DXA-based 3D modeling.

METHODS

We retrospectively analyzed 155 patients stratified by treatments: naive of treatment (NAIVE), alendronate (AL), denosumab (DMAB), and teriparatide (TPTD). DXA scans were performed at baseline and after treatment, and areal bone mineral density at spine and femur were measured. A software algorithm (3D-SHAPER) was used to derive 3D models from hip DXA scans and compute: trabecular and cortical volumetric BMD (vBMD), cortical thickness (Cth), and cortical surface BMD (cortical sBMD). Changes from baseline were normalized at 24 months and evaluated in terms or percentage.

RESULTS

After 24 months, a non-significant decrease was observed for trabecular vBMD, Cortical sBMD, Cth, and cortical vBMD (- 2.3, - 0.8, - 0.3, and - 0.5%) in the NAIVE group. Under AL and DMAB, significant increases were observed in trabecular vBMD (3.8 and 7.3%), cortical vBMD (1.4 and 2.0%), and cortical sBMD (1.5 and 3.6%). An increase in Cth was observed in patients under DMAB (1.8%). Under TPTD, a significant increase in Trabecular vBMD was observed (5.9%) associated with a non-significant increase of Cth (+ 1%) concomitant with a decrease in cortical vBMD (- 1.1%).

CONCLUSION

Results obtained in this head-to-head study are consistent with those obtained using computed tomography in the literature. DXA-based modeling techniques could complement standard DXA examination to monitor treatment effects on trabecular and cortical compartments.

Femoral neck cortical bone in female and male hip fracture cases: Differential contrasts in cortical width and sub-periosteal porosity in 112 cases and controls

OBJECTIVES

To quantitate differences between cases of hip fracture and controls in cortical width around the mid-femoral neck in men and women.

METHODS

Over 5 years, 64 (14 male) participants over age 55 (mean 79) years, who had never taken bone-active drugs and suffered intra-capsular hip fracture treated by arthroplasty, donated their routinely discarded distal intra-capsular femoral neck bone for histomorphometry. After embedding, complete femoral neck cross sections from the cut surface near the narrowest part of the neck were stained with von Kossa and cortical width was measured radially every 5 degrees of arc. Control material (n = 48, 25 male) was available through consented post mortems prior to the year 2000. Cortical widths were averaged for circumferential octants, each representing 45 degrees of arc. Divergence of individual cortical widths from their means was also examined.

RESULTS

Because sections were required to have a complete cortex, sampling was biased towards cases with sub-capital versus trans-cervical fractures. Compared to sex- and age matched controls, male cases showed larger relative differences in cortical widths than female cases. Unexpectedly, cortical widths in female but not male cases also showed marked over-representation of extremely narrow (<0.1 mm) cortical widths, located mainly posteriorly. The numbers of these very narrow cortical widths observed per subject retrospectively predicted female fracture status in logistic regression independently of mean cortical width values. Together with mean cortical width differences, the numbers of measured cortical widths <0.1 mm (out of 72 measured) raised the sensitivity of predicting fracture status in women from 48 to 80% at 80% specificity. In almost all cases, very narrow cortical widths were identified in regions enclosing a cortical pore roofed on its endosteal surface by thin structural bone defined a priori as trabecular.

CONCLUSIONS

Cortical widths <0.1 mm probably reflect zones where endosteal cortex has been trabecularised through expansion of an un-refilled sub-endosteal canal close to the periosteum. Persistent cortical defects occurring near the periosteal surface, where mechanical loading exerts its greatest stresses, are likely to result in extremes of localized concentrations of stress during a fall, unknown in young normal fallers. Such defects have the potential to help explain the excess of hip fractures among elderly women. Prevention of sub-periosteal tunnelling by osteoclasts might explain in part the additional benefits, beyond an increase in bone density, of treatments that reduce excessive bone resorption or else stimulate new bone formation on previously resorbed surfaces.

Associations Between Lean Mass, Muscle Strength and Power, and Skeletal Size, Density and Strength in Older Men

Studies examining the relationship between muscle parameters and bone strength have not included multiple muscle measurements and/or both central and peripheral skeletal parameters. The purpose of this study was to explore the relationship between lean mass, muscle strength and power, and skeletal size, bone density, and bone strength. We studied the association between appendicular lean mass (ALM), grip strength, and leg power, and central quantitative computed tomography (QCT) parameters in 2857 men aged 65 years or older; peripheral QCT was available on a subset (n = 786). ALM, grip strength, and leg power were measured by dual-energy X-ray absorptiometry (DXA), Jamar dynamometer, and the Nottingham Power Rig, respectively. Multivariable models adjusting for potential confounders including age, race, study site, BMI, and muscle measurements were developed and least squares means were generated from linear regression models. For the multivariable model, percent differences of bone parameters between lowest (Q1) and highest quartiles (Q4) of ALM, grip strength, and leg power were reported. ALM was significantly associated with central and peripheral QCT parameters: percent higher values (Q4 versus Q1) ranging from 3.3% (cortical volumetric bone mineral density [vBMD] of the femoral neck) to 31% (vertebral strength index of the spine). Grip strength was only significantly associated with radial parameters: percent higher values (Q4 versus Q1) ranging from 2.5% (periosteal circumference) to 7.5% (33% axial strength index [SSIx]). Leg power was associated with vertebral strength and lower cross-sectional area with percent lower values (Q4 versus Q1) of -11.9% and -2.7%, respectively. In older men, stronger associations were observed for ALM compared to muscle strength and power. Longitudinal studies are needed to examine the relationship between independent changes in muscle measurements and skeletal size, density and strength. © 2018 American Society for Bone and Mineral Research.

Monitoring bone changes due to calcium, magnesium, and phosphorus loss in rat femurs using Quantitative Ultrasound

Bone mineral density is an important parameter for the diagnosis of bone diseases, as well as for predicting fractures and treatment monitoring. Thus, the aim of the present study was to evaluate the potential of Quantitative Ultrasound (QUS) to monitor bone changes after calcium, phosphorus, and magnesium loss in rat femurs in vitro during a demineralization process. Four quantitative ultrasound parameters were estimated from bone surface echoes in eight femur diaphysis of rats. The echo signals were acquired during a decalcification process by Ethylenediaminetetraacetic Acid (EDTA). The results were compared to Quantitative Computed Tomography (QCT) and inductively coupled plasma optical emission spectrometry measurements for validation. Integrated Reflection Coefficient (IRC) reflection parameters and Frequency Slope of Reflection Transfer Function (FSRTF) during demineralization tended to decrease, while the backscattering parameter Apparent Integrated Backscatter (AIB) increased and Frequency Slope of Apparent Backscatter (FSAB) showed an oscillatory behavior with no defined trend. Results indicate a clear relation between demineralization and the corresponding decrease in the reflection parameters and increase in the scattering parameters. The trend analysis of the fall curve of the chemical elements showed a better relationship between IRC and QCT. It was possible to monitor bone changes after ions losses, through the QUS. Thus, it is an indication that the proposed protocol has potential to characterize bone tissue in animal models, providing consistent results towards standardization of bone characterization studies by QUS endorsing its use in humans.

Prediction of Fractures in Men Using Bone Microarchitectural Parameters Assessed by High-Resolution Peripheral Quantitative Computed Tomography-The Prospective STRAMBO Study

Areal bone mineral density (aBMD) poorly identifies men at high fracture risk. Our aim was to assess prediction of fractures in men by bone microarchitectural measures. At baseline, 825 men aged 60 to 87 years had the assessment of bone microarchitecture at distal radius and distal tibia by high-resolution peripheral QCT (HR-pQCT; XtremeCT-I, Scanco Medical, Brüttisellen, Switzerland). Bone strength was estimated by micro-finite element analysis. During the prospective 8-year follow-up, 105 men sustained fractures (59 vertebral fractures in 49 men and 70 nonvertebral fractures in 68 men). After adjustment for age, body mass index (BMI), prior falls, and fractures, most HR-pQCT measures at both skeletal sites predicted fractures. After further adjustment for aBMD, low distal radius trabecular number (Tb.N) was most strongly associated with higher fracture risk (hazard ratio [HR] = 1.63 per SD, 95% confidence interval [CI] 1.31-2.03, p < 0.001). In similar models, low Tb.N was associated with higher risk of major osteoporotic fracture (HR = 1.80 per SD, p < 0.001), vertebral fracture (HR = 1.78 per SD, p < 0.01) and nonvertebral fracture (HR = 1.46 per SD, p < 0.01). In comparison with the reference model (age, BMI, falls, fractures, aBMD), the adjustment for distal radius Tb.N increased the estimated fracture probability in men who sustained fractures versus those who did not have ones (difference = 4.1%, 95% CI 1.9-6.3%, p < 0.001). However, the adjustment for distal radius Tb.N did not increase the area under the curve (AUC, p = 0.37). Similar results were found for distal radius trabecular separation (Tb.Sp) and connectivity density (Conn. D). They were predictive of all fracture types and increased the estimated fracture risk, but not AUC, in men who had incident fractures. Thus, poor distal radius trabecular microarchitecture is predictive of fracture after adjustment for age, BMI, falls, fractures, and aBMD. Although distal radius Tb.N, Conn. D, and Tb.Sp improve the discrimination between men who will or who will not have fracture, they do not provide clinically relevant improvement of fracture prediction in older men. © 2018 American Society for Bone and Mineral Research.

Fracture Prediction by Computed Tomography and Finite Element Analysis: Current and Future Perspectives

PURPOSE OF REVIEW

This review critiques the ability of CT-based methods to predict incident hip and vertebral fractures.

RECENT FINDINGS

CT-based techniques with concurrent calibration all show strong associations with incident hip and vertebral fracture, predicting hip and vertebral fractures as well as, and sometimes better than, dual-energy X-ray absorptiometry areal biomass density (DXA aBMD). There is growing evidence for use of routine CT scans for bone health assessment. CT-based techniques provide a robust approach for osteoporosis diagnosis and fracture prediction. It remains to be seen if further technical advances will improve fracture prediction compared to DXA aBMD. Future work should include more standardization in CT analyses, establishment of treatment intervention thresholds, and more studies to determine whether routine CT scans can be efficiently used to expand the number of individuals who undergo evaluation for fracture risk.

A novel sideways fall simulator to study hip fractures ex vivo

Falls to the side are the leading cause of hip fractures in the elderly. The load that a person experiences during a fall cannot be measured with volunteers for ethical reasons. To evaluate injurious loads, while considering relevant energy input and body posture for a sideways fall, a subject-specific cadaveric impact experiment was developed. Full cadaveric femur-pelvis constructs (N = 2) were embedded in surrogate soft tissue material and attached to metallic surrogate lower limbs. The specimens were then subjected to an inverted pendulum motion, simulating a fall to the side with an impact to the greater trochanter. The load at the ground and the deformation of the pelvis were evaluated using a 6-axis force transducer and two high-speed cameras. Post-test, a trauma surgeon (PG) evaluated specimen injuries. Peak ground contact forces were 7132 N and 5641 N for the fractured and non-fractured specimen, respectively. We observed a cervical fracture of the femur in one specimen and no injuries in a second specimen, showing that the developed protocol can be used to differentiate between specimens at high and low fracture risk.

Cigarette smoking and hip volumetric bone mineral density and cortical volume loss in older adults: The AGES-Reykjavik study

This study aimed to explore the relationships of several indicators of cigarette smoking habits (smoking status, pack-years, age at smoking initiation and smoking cessation) with quantitative computed tomographic (QCT)-derived proximal femur bone measures (trabecular vBMD, integral vBMD and the ratio of cortical to total tissue volume (cvol/ivol)) and with subsequent change in these measures over the next five years. A total of 2673 older adults (55.9% women), aged 66-92 years at baseline from the Age, Gene/Environment Susceptibility (AGES)-Reykjavik Study, who had two QCT scans of the hip were studied. In multivariable linear regression models, compared to never-smokers, current smokers had lower cvol/ivol at baseline and former-smokers had poorer measures on all outcomes (lower trabecular vBMD, integral vBMD and cvol/ivol), even when adjusted for several potential confounders. Further, among former smokers, those with higher pack-years had worse bone outcomes and those with longer duration since smoking cessation had better bone health at baseline. Analyses of change in bone measures revealed that compared to never-smokers, current smokers had significantly greater loss of trabecular vBMD, integral vBMD, and cvol/ivol. The regression models included adjustment for sex, age, education, and baseline body mass index, creatinine, % weight change from age 50, 25OHD, physical activity level, high-sensitive C-Reactive protein levels, alcohol and coffee consumption, history of diabetes mellitus, arthritis, and respiratory diseases. In conclusion, both current and former smoking showed adverse associations with bone health assessed with QCT. Results suggest that current smoking in particular may aggravate the rate of bone loss at older age and highlight implications for targeting this risk factor in populations that present higher smoking prevalence and vulnerability to bone fragility.

Prediction of fracture load and stiffness of the proximal femur by CT-based specimen specific finite element analysis: cadaveric validation study

Background

Finite element analysis (FEA) of the proximal femur has been previously validated with large mesh size, but these were insufficient to simulate the model with small implants in recent studies. This study aimed to validate the proximal femoral computed tomography (CT)-based specimen-specific FEA model with smaller mesh size using fresh frozen cadavers.

Methods

Twenty proximal femora from 10 cadavers (mean age, 87.1 years) were examined. CT was performed on all specimens with a calibration phantom. Nonlinear FEA prediction with stance configuration was performed using Mechanical Finder (mesh,1.5 mm tetrahedral elements; shell thickness, 0.2 mm; Poisson’s coefficient, 0.3), in comparison with mechanical testing. Force was applied at a fixed vertical displacement rate, and the magnitude of the applied load and displacement were continuously recorded. The fracture load and stiffness were calculated from force–displacement curve, and the correlation between mechanical testing and FEA prediction was examined.

Results

A pilot study with one femur revealed that the equations proposed by Keller for vertebra were the most reproducible for calculating Young’s modulus and the yield stress of elements of the proximal femur. There was a good linear correlation between fracture loads of mechanical testing and FEA prediction (R² = 0.6187) and between the stiffness of mechanical testing and FEA prediction (R² = 0.5499). There was a good linear correlation between fracture load and stiffness (R² = 0.6345) in mechanical testing and an excellent correlation between these (R² = 0.9240) in FEA prediction.

Conclusions

CT-based specimen-specific FEA model of the proximal femur with small element size was validated using fresh frozen cadavers. The equations proposed by Keller for vertebra were found to be the most reproducible for the proximal femur in elderly people.

Comparison of non-invasive assessments of strength of the proximal femur

It is not clear which non-invasive method is most effective for predicting strength of the proximal femur in those at highest risk of fracture. The primary aim of this study was to compare the abilities of dual energy X-ray absorptiometry (DXA)-derived aBMD, quantitative computed tomography (QCT)-derived density and volume measures, and finite element analysis (FEA)-estimated strength to predict femoral failure load. We also evaluated the contribution of cortical and trabecular bone measurements to proximal femur strength. We obtained 76 human cadaveric proximal femurs (50 women and 26 men; age 74±8.8years), performed imaging with DXA and QCT, and mechanically tested the femurs to failure in a sideways fall configuration at a high loading rate. Linear regression analysis was used to construct the predictive model between imaging outcomes and experimentally-measured femoral strength for each method. To compare the performance of each method we used 3-fold cross validation repeated 10 times. The bone strength estimated by QCT-based FEA predicted femoral failure load (R²_adj=0.78, 95%CI 0.76-0.80; RMSE=896N, 95%CI 830-961) significantly better than femoral neck aBMD by DXA (R²_adj=0.69, 95%CI 0.66-0.72; RMSE=1011N, 95%CI 952-1069) and the QCT-based model (R²_adj=0.73, 95%CI 0.71-0.75; RMSE=932N, 95%CI 879-985). Both cortical and trabecular bone contribute to femoral strength, the contribution of cortical bone being higher in femurs with lower trabecular bone density. These findings have implications for optimizing clinical approaches to assess hip fracture risk. In addition, our findings provide new insights that will assist in interpretation of the effects of osteoporosis treatments that preferentially impact cortical versus trabecular bone.

Effects of strength training and raloxifene on femoral neck metabolism and microarchitecture of aging female Wistar rats

The aim of this study was to prevent female osteoporosis using strength training (ST), raloxifene (Ral) or a combination of ST plus Ral during the natural female aging process, specifically in the periestropause period. For a total of 120 days, aging female Wistar rats at 18-21 months of age performed ST on a ladder three times per week, and Ral was administered daily by gavage (1 mg/kg/day). Bone microarchitecture, areal bone mineral density, bone strength of the femoral neck, immunohistochemistry, osteoclast and osteoblast surface were assessed. We found that the treatments modulate the bone remodeling cycle in different ways. Both ST and Ral treatment resulted in improved bone microarchitecture in the femoral neck of rats in late periestropause. However, only ST improved cortical microarchitecture and bone strength in the femoral neck. Thus, we suggest that performing ST during the late period of periestropause is a valid intervention to prevent age-associated osteoporosis in females.

Differences in femoral neck structure between elderly Caucasian and Chinese populations: a cross-sectional study of Perth-Beijing cohorts

Structural skeletal differences of the femoral neck of older Beijing-Chinese and Perth-Caucasian women were compared; adjusting for frame size-related differences, Beijing-Chinese have lower periosteal width; however, indices of internal bone distribution suggest that Beijing-Chinese may exhibit increased resistance to fracture that may relate to the reduced hip fracture incidence.

INTRODUCTION

Ethnic differences in skeletal structure may relate to differences in hip fracture risk in Chinese and Caucasian populations. 2D mass, size, and structural biomechanics were compared in the two populations.

METHODS

Quantitative computed tomography-derived geometric variables were compared in age-matched community-derived female populations, 196 Beijing-Chinese 76.5 ± 4.8 (mean ± SD) years and 237 Perth-Caucasians 77.1 ± 5.0 years. These included scanned area (A), periosteal width (W), bone mineral content (BMC), aBMD, bone cross-sectional area (bCSA), section modulus (Z) and buckling ratio (BR). Assumption-free measures included sigma (σ), related to the distribution of bone in the scanned image previously identified as a predictor of hip fracture, and delta (δ), the center-of-mass displacement from the geometric center.

RESULTS

Compared to Beijing-Chinese, Perth-Caucasians were heavier (Beijing-Chinese 58.7 ± 11.8; Perth-Caucasians 66.1 ± 11.0 kg), taller (154.9 ± 16.7 vs 158.9 ± 6.0 cm), and had higher BMC, A, and W. After adjustment for frame size, BMC was not significantly different but W remained higher in Perth-Caucasians. Differences in variables aBMD, Z, BR, and σ favored higher resistance to failure with Beijing-Chinese before and after adjustment for frame size. δ was similar in both populations; bCSA was higher in Beijing-Chinese before adjustment for frame size but not after.

CONCLUSIONS

Bone mass differences in two populations were related to frame size differences. However, femoral neck width remained smaller in Beijing-Chinese suggesting effects of local genetic and environmental factors. In Beijing-Chinese participants compared to Perth-Caucasians, internal bone distribution suggests increased resistance to deformation if exposed to same force that may, in-part, relate to reduced incidence of hip fracture in Beijing-Chinese.

Dual-energy X-ray Absorptiometry

Bone mineral density (BMD) measurement by dual-energy X-ray absorptiometry (DXA) is the most commonly used method to assess fracture risk. DXA utilizes two different energy X-rays to calculate BMD and, by comparison to a young normative database, the T-score. In 1994, the World Health Organization defined osteoporosis based on T-score, changing the paradigm of the field and forever placing DXA measurements in the center of osteoporosis diagnosis. Since then, many large studies have demonstrated the predictive value of BMD by DXA-for every standard deviation decline in BMD, there is a relative risk of 1.5-2.5 for fracture. This predictive ability is similar to how blood pressure can predict myocardial infarction. Limitations of DXA are also important to consider. While BMD by DXA can identify those at risk, there is a significant overlap in the BMD of patients who will and will not fracture. Special considerations are also needed in men and ethnic minority groups. These groups may have different bone size, thus affecting the normative range of BMD, and/or distinct bone structure that affect the association between BMD and fractures. Finally, BMD can be affected by positioning errors or artifacts, including osteoarthritis, fracture, and jewelry. Of course, DXA has tremendous strengths as well-namely its wide availability, its low radiation exposure, and a large body of evidence that relate DXA measurements to fracture risk. For these reasons, DXA remains the cornerstone of fracture assessment now and for the foreseeable future.