Broadband achromatic metalens for linearly polarized light from 450 to 800 nm

All-silicon metalens for broadband achromatic polarization multiplexing in long-wave infrared wavelengths

Traditional long-wave infrared polarimetry usually relies on complex optical setups, making it challenging to meet the increasing demand for system miniaturization. To address this problem, we design an all-silicon broadband achromatic polarization-multiplexing metalens (BAPM) operating at the wavelength range of 9-12 µm. A machine-learning-based design method is developed to replace the tedious and computationally intensive simulation of a large number of meta-atoms. The results indicate that the coefficients of variation in focal length of the BAPM are 3.95% and 3.71%, and the average focusing efficiencies are 41.3% and 40.5% under broadband light incidence with x- and y-polarizations, respectively.

3D-printed multilayer structures for high-numerical aperture achromatic metalenses

Flat optics consisting of nanostructures of high-refractive index materials produce lenses with thin form factors that tend to operate only at specific wavelengths. Recent attempts to achieve achromatic lenses uncover a trade-off between the numerical aperture (NA) and bandwidth, which limits performance. Here, we propose a new approach to design high-NA, broadband, and polarization-insensitive multilayer achromatic metalenses (MAMs). We combine topology optimization and full-wave simulations to inversely design MAMs and fabricate the structures in low-refractive index materials by two-photon polymerization lithography. MAMs measuring 20 μm in diameter operating in the visible range of 400 to 800 nm with 0.5 and 0.7 NA were achieved with efficiencies of up to 42%. We demonstrate broadband imaging performance of the fabricated MAM under white light and RGB narrowband illuminations. These results highlight the potential of the 3D-printed multilayer structures for realizing broadband and multifunctional meta-devices with inverse design.

Ultra-Thin, Short-Focus, and High-Aperture Metalens for Generating and Detecting Laser Optical Vortices

A combined high-aperture metalens in a thin silicon nitride film that consists of two tilted sectored metalenses is considered. Each sector of the metalens consists of a set of binary subwavelength gratings. The diameter of the metalens is 14 μm. Using a time-domain finite difference method, we show that the metalens can simultaneously detect optical vortices with two topological charges −1 and −2, almost over the entire spectrum of visible wavelengths. The metalens can distinguish several wavelengths that are focused at different points in the focal plane due to a 1-nm change in wavelength resulting in a focal spot shift of about 4 nm. When the metalens is illuminated by a Gaussian beam with left-handed circular polarization, two optical vortices with topological charges 1 and 2 are simultaneously formed 6-μm apart at the focal distance of 6 μm.