Flat metaform near-eye visor

Off-axis metasurfaces for folded flat optics

The overall size of an optical system is limited by the volume of the components and the internal optical path length. To reach the limits of miniaturization, it is possible to reduce both component volume and path length by combining the concepts of metasurface flat optics and folded optics. In addition to their subwavelength component thickness, metasurfaces enable bending conventional folded geometries off axis beyond the law of reflection. However, designing metasurfaces for highly off-axis illumination with visible light in combination with a high numerical aperture is non-trivial. In this case, traditional designs with gradient metasurfaces exhibit low diffraction efficiencies and require the use of deep-subwavelength, high-index, and high-aspect-ratio semiconductor nanostructures that preclude inexpensive, large-area nanofabrication. Here, we describe a design approach that enables the use of low-index (n ≈ 1.5), low-aspect ratio structures for off-axis metagratings that can redirect and focus visible light (λ = 532 nm) with near-unity efficiency. We show that fabricated optical elements offer a very large angle-of-view (110°) and lend themselves to scalable fabrication by nano-imprint lithography.

Metagrating meets the geometry-based efficiency limit for AR waveguide in-couplers

Recently, augmented reality (AR) displays have attracted considerable attention due to the highly immersive and realistic viewer experience they can provide. One key challenge of AR displays is the fundamental trade-off between the extent of the field-of-view (FOV) and the size of the eyebox, set by the conservation of etendue sets this trade-off. Exit-pupil expansion (EPE) is one possible solution to this problem. However, it comes at the cost of distributing light over a larger area, decreasing the overall system's brightness. In this work, we show that the geometry of the waveguide and the in-coupler sets a fundamental limit on how efficient the combiner can be for a given FOV. This limit can be used as a tool for waveguide designers to benchmark the in-coupling efficiency of their in-coupler gratings. We design a metasurface-based grating (metagrating) and a commonly used SRG as in-couplers using the derived limit to guide optimization. We then compare the diffractive efficiencies of the two types of in-couplers to the theoretical efficiency limit. For our chosen waveguide geometry, the metagrating's 28% efficiency surpasses the SRG's 20% efficiency and nearly matches the geometry-based limit of 29% due to the superior angular response control of metasurfaces compared to SRGs. This work provides new insight into the efficiency limit of waveguide-based combiners and paves a novel path toward implementing metasurfaces in efficient waveguide AR displays.

Near-eye display with a triple-channel waveguide for metaverse

We present a near-eye display featuring a triple-channel waveguide with chiral liquid crystal gratings. Our triple-channel waveguide is capable of dividing one field of view into three through both the polarization orthogonality and angular separation. To illustrate its principle, a k-space diagram, which takes into account the aspect ratio of field of view, is depicted. Our results demonstrate that its diagonal field of view reaches 90°, eye relief is 10 mm, exit pupil is 4.9 × 4.9 mm², transmittance is 4.9%, and uniformity is 89%.

Ultracompact Nanophotonics: Light Emission and Manipulation with Metasurfaces

Internet of Things (IoT) technology is prosperous for the betterment of human well-being. With the expeditious needs of miniature functional devices and systems for adaptive optics and light manipulation at will, relevant sensing techniques are thus in the urgent stage of development. Extensive developments in ultrathin artificial structures, namely metasurfaces, are paving the way for the next-generation devices. A bunch of tunable and reconfigurable metasurfaces with diversified catalogs of mechanisms have been developed recently, enabling dynamic light modulation on demand. On the other hand, monolithic integration of metasurfaces and light-emitting sources form ultracompact meta-devices as well as exhibiting desired functionalities. Photon-matter interaction provides revolution in more compact meta-devices, manipulating light directly at the source. This study presents an outlook on this merging paradigm for ultracompact nanophotonics with metasurfaces, also known as metaphotonics. Recent advances in the field hold great promise for the novel photonic devices with light emission and manipulation in simplicity.

Active optical metasurfaces: comprehensive review on physics, mechanisms, and prospective applications

Optical metasurfaces with subwavelength thickness hold considerable promise for future advances in fundamental optics and novel optical applications due to their unprecedented ability to control the phase, amplitude, and polarization of transmitted, reflected, and diffracted light. Introducing active functionalities to optical metasurfaces is an essential step to the development of next-generation flat optical components and devices. During the last few years, many attempts have been made to develop tunable optical metasurfaces with dynamic control of optical properties (e.g., amplitude, phase, polarization, spatial/spectral/temporal responses) and early-stage device functions (e.g., beam steering, tunable focusing, tunable color filters/absorber, dynamic hologram, etc) based on a variety of novel active materials and tunable mechanisms. These recently-developed active metasurfaces show significant promise for practical applications, but significant challenges still remain. In this review, a comprehensive overview of recently-reported tunable metasurfaces is provided which focuses on the ten major tunable metasurface mechanisms. For each type of mechanism, the performance metrics on the reported tunable metasurface are outlined, and the capabilities/limitations of each mechanism and its potential for various photonic applications are compared and summarized. This review concludes with discussion of several prospective applications, emerging technologies, and research directions based on the use of tunable optical metasurfaces. We anticipate significant new advances when the tunable mechanisms are further developed in the coming years.

Augmented reality and virtual reality displays: emerging technologies and future perspectives

With rapid advances in high-speed communication and computation, augmented reality (AR) and virtual reality (VR) are emerging as next-generation display platforms for deeper human-digital interactions. Nonetheless, to simultaneously match the exceptional performance of human vision and keep the near-eye display module compact and lightweight imposes unprecedented challenges on optical engineering. Fortunately, recent progress in holographic optical elements (HOEs) and lithography-enabled devices provide innovative ways to tackle these obstacles in AR and VR that are otherwise difficult with traditional optics. In this review, we begin with introducing the basic structures of AR and VR headsets, and then describing the operation principles of various HOEs and lithography-enabled devices. Their properties are analyzed in detail, including strong selectivity on wavelength and incident angle, and multiplexing ability of volume HOEs, polarization dependency and active switching of liquid crystal HOEs, device fabrication, and properties of micro-LEDs (light-emitting diodes), and large design freedoms of metasurfaces. Afterwards, we discuss how these devices help enhance the AR and VR performance, with detailed description and analysis of some state-of-the-art architectures. Finally, we cast a perspective on potential developments and research directions of these photonic devices for future AR and VR displays.

Electrically Actuated Varifocal Lens Based on Liquid-Crystal-Embedded Dielectric Metasurfaces

Compact varifocal lenses are essential to various imaging and vision technologies. However, existing varifocal elements typically rely on mechanically actuated systems with limited tuning speeds and scalability. Here, an ultrathin electrically controlled varifocal lens based on a liquid crystal (LC) encapsulated dielectric metasurface is demonstrated. Enabled by the field-dependent LC anisotropy, applying a voltage bias across the LC cell modifies the local phase response of the silicon meta-atoms, in turn modifying the metalens focal length. In a numerical implementation, a voltage-actuated metalens with continuous zoom and up to 20% total focal shift is demonstrated. The LC-based metalens concept is experimentally verified through the design and fabrication of a bifocal metalens that facilitates high-contrast switching between two discrete focal lengths upon application of a 9.8 V_pp voltage bias. Owing to their ultrathin thickness and adaptable design, LC-driven dielectric metasurfaces open new opportunities for compact varifocal lensing in a diversity of modern imaging applications.

Nearly dispersionless multicolor metasurface beam deflector for near eye display designed by a physics-driven deep neural network

Dispersion is one of the most important issues in see-through near eye displays with waveguide technology. In particular, the nanophotonics design is challenging but demanding. In this paper, we propose a design method for a multilayer achromatic metasurface structure for near eye display application by a physics-driven generative neural network. Two in-coupling metagratings under different projector illuminations are presented and numerically verified with the absolute diffraction efficiency over 89%. A beam splitter, which provides a balance between compactness and visual comfort in a single-projector-binocular display, is also designed. Finally, we apply this method to an out-coupling metasurface with the capability of enlarging the visible region by threefold.

Metaform optics: Bridging nanophotonics and freeform optics

The demand for high-resolution optical systems with a compact form factor, such as augmented reality displays, sensors, and mobile cameras, requires creating new optical component architectures. Advances in the design and fabrication of freeform optics and metasurfaces make them potential solutions to address the previous needs. Here, we introduce the concept of a metaform-an optical surface that integrates the combined benefits of a freeform optic and a metasurface into a single optical component. We experimentally realized a miniature imager using a metaform mirror. The mirror is fabricated via an enhanced electron beam lithography process on a freeform substrate. The design degrees of freedom enabled by a metaform will support a new generation of optical systems.

Near-infrared thermally modulated varifocal metalens based on the phase change material Sb2S3

Focus-tunable metalenses play an indispensable role in the development of integrated optical systems. In this paper, the phase change material Sb₂S₃ is used in a thermally modulated varifocal metalens based on PB-phase for the first time. Sb₂S₃ not only has a real part of refractive index shift between the amorphous and crystalline state but also has low losses in both amorphous and crystalline states in the near-infrared region. By switching Sb₂S₃ between the two states, a metalens doublet with a variable focal length is proposed. Moreover, the full width at half maximum of each focal point is close to the diffraction limit. And the focusing efficiency can be over 50% for the two focal points. Together with the advantage of precise thermal control, the proposed metalens has great potential in the application of multi-functional devices, biomedical science, communication and imaging.

Design of a compact waveguide eyeglass with high efficiency by joining freeform surfaces and volume holographic gratings

In this paper, a compact waveguide eyeglass integrating freeform surfaces and volume holographic gratings (VHGs) is proposed for full-color display with high energy utilization. The in-coupler with four freeform surfaces collimates the light emitting from the micro image source (MIS) and couples them into the waveguide. The six-layer VHGs as an outcoupler are designed to modulate the light propagating toward the user's eye. The chromatic aberrations and aberrations are well optimized and compensated by the in-coupler. The diffraction angular bandwidth of the gratings matches the angular range of the light propagating in the waveguide. The simulation results show that our proposed eyeglass achieves a diagonal field of view (FOV) of 39.5°, the average diffraction efficiency of the outcoupler achieves 95.22%, and the diffraction uniformity is about 0.95. Because of the integrated designs and compact stable structures, the optimized display system is expected to be flexibly used in various applications.

Design of achromatic augmented reality visors based on composite metasurfaces

A compact near-eye visor (NEV) system that can guide light from a display to the eye could transform augmented reality (AR) technology. Unfortunately, existing implementations of such an NEV either suffer from small field of view or chromatic aberrations. See-through quality and bulkiness further make the overall performance of the visors unsuitable for a seamless user experience. Metasurfaces are an emerging class of nanophotonic elements that can dramatically reduce the size of optical elements while enhancing functionality. In this paper, we present a design of composite metasurfaces for an ultracompact NEV. We simulate the performance of a proof-of-principle visor corrected for chromatic aberrations while providing a large display field of view (>77^∘ both horizontally and vertically) and good see-through quality [>70% transmission and less than a wavelength root mean-square (RMS) wavefront error over the whole visible wavelength range] as needed for an immersive AR experience.

MEMS-actuated metasurface Alvarez lens

Miniature lenses with a tunable focus are essential components for many modern applications involving compact optical systems. While several tunable lenses have been reported with various tuning mechanisms, they often face challenges with respect to power consumption, tuning speed, fabrication cost, or production scalability. In this work, we have adapted the mechanism of an Alvarez lens - a varifocal composite lens in which lateral shifts of two optical elements with cubic phase surfaces give rise to a change in the optical power - to construct a miniature, microelectromechanical system (MEMS)-actuated metasurface Alvarez lens. Implementation based on an electrostatic MEMS generates fast and controllable actuation with low power consumption. The utilization of metasurfaces - ultrathin and subwavelength-patterned diffractive optics - as optical elements greatly reduces the device volume compared to systems using conventional freeform lenses. The entire MEMS Alvarez metalens is fully compatible with modern semiconductor fabrication technologies, granting it the potential to be mass-produced at a low unit cost. In the reported prototype operating at 1550 nm wavelength, a total uniaxial displacement of 6.3 µm was achieved in the Alvarez metalens with a direct-current (DC) voltage application up to 20 V, which modulated the focal position within a total tuning range of 68 µm, producing more than an order of magnitude change in the focal length and a 1460-diopter change in the optical power. The MEMS Alvarez metalens has a robust design that can potentially generate a much larger tuning range without substantially increasing the device volume or energy consumption, making it desirable for a wide range of imaging and display applications.

Design method of nonsymmetric imaging systems consisting of multiple flat phase elements

Imaging systems consisting of flat phase elements can realize the same functions and applications of conventional geometric optical systems, as well as the ones using aspherical or freeform optics, but can achieve more compactness, lighter-weight and easier-alignment. In addition, it is easy to integrate multiple phase elements into a single flat element. Here we propose a novel design method and realize the design of off-axis nonsymmetric imaging systems consisting of multiple flat phase elements. Compared with other traditional design methods of phase elements, the whole design process starts from an initial system using simple true geometric planes. The phase profiles or functions are generated point-by-point directly based on the given system specifications and configuration. In comparison with other direct or point-by-point design methods of flat phase elements, the rays of multiple fields and pupil positions are employed in the design framework. Closed-form phase functions of multiple flat elements are designed quickly and effectively by connecting and integrating the real three-dimensional space and the phase function space. This method can be taken as a fast phase retrieval method to some degree. To demonstrate the feasibility of the proposed design method, we present a high-performance compact system as design example. The design method and framework depicted in this paper can be applied in many areas, such as virtual reality (VR) and augmented reality (AR), miniature cameras, high-performance telescopy, microscopy, and illumination design.