Low-loss air-core polarization maintaining terahertz fiber

Continuous fabrication of polarization maintaining fibers via an annealing improved infinity additive manufacturing technique for THz communications

We report the design and fabrication of a polarization-maintaining fiber for applications in fiber-assisted THz communications. The fiber features a subwavelength square core suspended in the middle of a hexagonal over-cladding tube by four bridges. The fiber is designed to have low transmission losses, high birefringence, high flexibility, and near-zero dispersion at the carrier frequency of 128 GHz. An infinity 3D printing technique is used to continuously fabricate a 5 m-long polypropylene fiber of ∼6.8 mm diameter. The fiber transmission losses are furthermore reduced by as high as ∼4.4 dB/m via post-fabrication annealing. Cutback measurements using 3 m-long annealed fibers show ∼6.5-11 dB/m and ∼6.9-13.5 dB/m losses (by power) over a 110-150 GHz window for the two orthogonally polarized modes. Signal transmission with bit error rates of ∼10^-11-10^-5 is achieved at 128 GHz for 1-6 Gbps data rates using a 1.6 m-long fiber link. The average polarization crosstalk values of ∼14.5 dB and ∼12.7 dB are demonstrated for the two orthogonal polarizations in fiber lengths of 1.6-2 m, which confirms the polarization-maintaining property of the fiber at ∼1-2 meter lengths. Finally, THz imaging of the fiber near-field is performed and shows strong modal confinement of the two orthogonal modes in the suspended-core region well inside of the hexagonal over-cladding. We believe that this work shows a strong potential of the infinity 3D printing technique augmented with post-fabrication annealing to continuously produce high-performance fibers of complex geometries for demanding THz communications applications.

Design, fabrication, and characterization of a single-polarization single-mode flexible hollow waveguide for low loss millimeter wave propagation

A flexible metallic waveguide with elliptical core that achieves single-polarization single-mode (SPSM) propagation at millimeter wave was designed, fabricated, and characterized. In order to achieve SPSM propagation, optimization of the lengths of major/minor axes of elliptical core was conducted to cut off one of the two orthogonally polarized fundamental modes and all high-order modes. A one-meter long hollow elliptical waveguide (HEW) with major/minor axis length of 1.5/2.7 mm was fabricated. The substrate tube was a flexible elliptical polycarbonate (PC) tube, which was fabricated through glass-draw technique. Silver film was then coated on the inner surface of the tube. Simulation results show that the 1.5/2.7 mm HEW maintains SPSM propagation in the frequency band from 66.5 to 114 GHz. The SPSM operation was experimentally discussed in detail at 100 GHz. The measured loss of 2.58 dB/m and the output polarization ratio of 99.9% was obtained after propagating one meter. Furthermore, the waveguide was robust to bending and twisting. The additional loss was as small as 0.2 dB/m even when the waveguide was coiled into a circle. The potential application of HEWs as polarizers was demonstrated by using a 10 cm long waveguide for polarization detection and extinction ratio of 22.3 dB was achieved at 100 GHz.

Terahertz polarization-maintaining subwavelength filters

Terahertz (THz) polarization-maintaining waveguides, which have been considered fundamental elements in polarization-sensitive THz systems, are promising platforms in developing functional THz devices. Here, we propose a THz grating based on a subwavelength rectangular polymer waveguide, which filters two polarization states simultaneously. The proposed gratings are characterized and discussed using numerical simulations. We observe two transmission dips with over a 20.9 dB extinction ratio (ER) and around a 21.1 GHz full-width half-maximum (FWHM), where the reflective frequencies of the two polarization waves and the separation between them can be harnessed with appropriate structure designs. Furthermore, we demonstrate that the grating can operate as a polarization-maintaining narrow bandpass filter (ER>12.3 dB and FWHM<1.7 GHz) by introducing a π-phase shift. This work has the potential to open a new avenue for steering polarized THz radiation using the waveguide-based filters, which could be integrated in THz polarization-sensitive imaging, sensing, and wireless communication systems.

Design and numerical analysis of a THz square porous-core photonic crystal fiber for low flattened dispersion, ultrahigh birefringence

We propose a kind of square porous-core photonic crystal fiber (PCF) for polarization-maintaining terahertz (THz) wave guidance. An asymmetry is introduced by implementing rectangular array air holes in the porous core of the PCF, and ultrahigh birefringence and low effective material loss (EML) can be achieved simultaneously. The properties of THz wave propagation are analyzed numerically in detail. The numerical results indicate that the proposed fiber offers a high birefringence of 0.063 and a low EML of 0.081  cm^-1 at 1 THz. Moreover, a very low flattened dispersion profile is observed over a wide frequency domain of 0.85-1.9 THz. The zero flattened dispersion can be controlled. It is predicted that this PCF would be used potentially in polarization maintaining and dispersion management of THz waves.

Ultrahigh birefringence, ultralow material loss porous core single-mode fiber for terahertz wave guidance

In this paper, a novel polarization-maintaining single-mode photonic crystal fiber (PCF) has been suggested for terahertz (THz) transmission applications. The reported PCF has five layers of hexagonal cladding with two layers of porous core. The cladding and core territory of the PCF are constituted by circular and elliptical air cavities, accordingly acting as a dielectric medium. Different geometrical parameters of the proposed PCF including pitches and diameters of circular air holes with the major and minor axes of elliptical air cavities being varied with the optimized structure. Various effects on the proposed PCF such as eccentricity and porosity effects are also carefully investigated. The numerical process is investigated by one of the most popular methods, the finite element method (FEM). All numerical computational results have revealed the ultrahigh birefringence in the order of 1.19×10^-02 as well as the ultralow bulk absorption material loss of 0.0689  cm^-1 at the 1 THz activation frequency. Besides, the V-parameter is also investigated for checking the proposed fiber modality. The proposed single-mode porous core hexagonal PCF is expected to be useful for convenient broadband transmission and numerous applications in the areas of THz technology.

Broadband orbital angular momentum transmission using a hollow-core photonic bandgap fiber

We present the viability of exploiting a current hollow-core photonic bandgap fiber (HC-PBGF) to support orbital angular momentum (OAM) states. The photonic bandgap intrinsically provides a large refractive index spacing for guiding light, leading to OAM transmission with low crosstalk. From numerical simulations, a broad OAM_±1 mode transmission window with satisfied effective index separations between vector modes (>10^-4) and low confinement loss (<3  dB/km) covering 240 nm bandwidth is observed. The OAM purity (defined as normalized power weight for OAM mode) is found to be affected by the modal effective area. Simulation results also show HC-PBGF based OAM transmission is immune to fabrication inaccuracies near the hollow core. This work illustrates that HC-PBGF is a competitive candidate for high-capacity communication harnessing OAM multiplexing.

Polarization-maintaining low-loss porous-core spiral photonic crystal fiber for terahertz wave guidance

A polarization-maintaining porous-core spiral photonic crystal fiber is proposed for efficient transmission of polarization-maintaining terahertz (THz) waves. The finite element method with perfectly matched layer boundary conditions is used to characterize the guiding properties. We demonstrate that by creating artificial asymmetry in the porous core, an ultrahigh birefringence of 0.0483 can be obtained at the operating frequency of 1.0 THz. Moreover, a low effective material loss of 0.085  cm^-1 and very small confinement loss of 1.91×10^-3  dB/cm are achieved for the y-polarization mode with optimal design parameters. This article also focuses on some crucial design parameters such as power fraction, bending loss, and dispersion for usability in the THz regime.

Characterization of cylindrical terahertz metallic hollow waveguide with multiple dielectric layers

Dielectric-coated metallic hollow waveguides (DMHW) are drawing considerable attention for their application in terahertz (THz) waveguiding. This paper theoretically analyzes the multilayer structure to reduce the transmission and bending loss of DMHW. The efficiency of THz multilayer DMHW depends on a proper selection of dielectric materials and geometrical parameters. The low-loss properties are demonstrated by studying the multilayer gold waveguides with a stack of polypropylene (PP) and Si-doped polypropylene (PP(Si)). Comparisons are made with single-layer Au/PP and Au-only waveguides. The effect of dielectric absorption is discussed in detail. It is found that low index dielectric causes more additional loss than that of high index dielectric layers. Several design considerations for the THz multilayer DMHW are pointed out by studying the effects of multilayer structure parameters with a stack of polyethylene (PE) and TiO(2)-doped polyethylene (PE(TiO2)). We conclude that the inner radius of the waveguide and the refractive indices of the dielectrics tend to be larger in order to reduce the influence of material absorption. An optimal value exists for the total number of layers when the dielectrics are absorptive. The absorption tolerances are pointed out to guarantee a smaller loss for multilayer DMHW than that of metal-only waveguide. Finally, a fabrication method for THz multilayer DMHW Ag/PE/PE(TiO2) is proposed based on co-rolling technique.

Theory for terahertz plasmons of metallic nanowires with sub-skin-depth diameters

We investigate the propagation properties of terahertz plasmon of a metallic nanowire with sub-skin-depth diameter. By taking the small radius and the huge relative permittivity into account, we establish an approximate analytical description for this kind of surface plasmon. It is shown that the main propagation properties are closely related to the product of the radius of the metallic nanowire and the complex wave number of the metal. In addition, when the radius of the metal wire is smaller than the skin-depth, the size of the modal field is simply proportional to the radius of the metal wire. We also carefully verify these analytical predictions with rigorous numerical simulations.

Analytical recurrence formula for the zeroth-order metal wire plasmon of terahertz waves

An analytical recurrence formula for the zeroth-order metal wire plasmon of terahertz waves is presented. In the derivation, the property that the relative permittivity of a metal in the spectral region of terahertz wave is huge, the property that the effective index is about 1, some properties of modified Bessel functions, and a suitable Taylor expansion are employed. The recurrence formula is numerically tested for 11 nonmagnetic metals for the whole spectral region of terahertz waves and for the wide radius range from 10 mum to infinity. We find that the relative deviation for the effective index always becomes smaller than 2.1x10(-6) after only four recurrences if a suitable initial input is used. Some related problems, such as the connection to the Newton method and the dependence of the accuracy on frequency, are also discussed.

An explicit formula for metal wire plasmon of terahertz wave

An explicit formula for metal wire plasmon of terahertz wave is analytically derived. The derivation is based on the huge relative permittivities of nonmagnetic metals in the spectral region of terahertz wave, some important properties of modified Bessel functions, and a suitable Taylor expansion. The obtained formula is further checked by many numerical tests. We find that, for all 11 tested nonmagnetic metals, for the whole spectral region of terahertz wave, and for the wide radius range from 10 microm to infinity, the relative deviation for the effective index is always smaller than 5%. This good agreement clearly shows that the derived expression can be conveniently used for the analysis and design of metal wire plasmon of terahertz wave.

Squeezed lattice elliptical-hole terahertz fiber with high birefringence

A highly birefringent elliptical-hole terahertz (THz) fiber with a squeezed lattice is proposed. This THz fiber is formed through regular linear deformation of a circular porous fiber by squeezing it in one direction, which may be fabricated with the existing fabrication technology. By numerical analysis we show that, with a moderate amount of deformation, the proposed THz fiber can exhibit high birefringence on a level of 10(-2) over a wide THz frequency range. And the THz fiber guiding loss caused by material absorption can be reduced effectively, since a dominant fraction of modal power is distributed in the airholes inside the dielectric material.