Study of silicon nanofibrous structure formed by femtosecond laser irradiation in air

Reconstructing of Embedded High-Aspect-Ratio Nano-Voids Generated by Ultrafast Laser Bessel Beams

Ultrafast non-diffractive Bessel laser beams provide strong light confinement and show robust advantages for fabricating high-aspect-ratio nanoscale structures inside transparent materials. They take the form of nanoscale voids with typical diameters well below the wavelength and aspect ratio of more than 1000. Delivering 3D morphologies of such nanoscale voids is an important issue to evaluate the result for fabrication. However, the characterization of such laser-induced structures is a difficult task. Here, an accurate and time-saving tomography-like methodology is proposed and adopted for reconstructing the morphology of high-aspect-ratio nano-holes. The technique allows an accurate assertion of laser parameters and position on nano-structured features. The reconstructed configuration reveals that nanoholes morphologies have a close relationship with energy distribution in the focal region. It suggests that the configuration of micro-explosion can be controlled by laser energy deposition in the process of laser-matter interaction down to the nanoscale.

Gold-silicon nanofiber synthesized by femtosecond laser radiation for enhanced light absorptance

In this study, we devised a new concept for the precise nanofabrication of Au-Si fibrous nanostructures using megahertz femtosecond laser irradiation in air and atmospheric pressure conditions. The weblike fibrous nanostructures of Au thin layer on silicon substrate, which are proposed for the application of solar cells, exhibit a specific improvement of the optical properties in visible wavelength. Varying numbers of laser interaction pulses were used to control the synthesis of the nanofibrous structures. Electron microscopy analysis revealed that the nanostructures are formed due to the aggregation of polycrystalline nanoparticles of the respective constituent materials with diameters varying between 30 and 90 nm. Measurement of the reflectance through a spectroradiometer showed that the coupling of incident electromagnetic irradiation was greatly improved over the broadband wavelength range. Lower reflectance intensity was obtained with a higher number of laser pulses due to the bulk of gold nanoparticles being agglomerated by the mechanism of fusion. This forms interweaving fibrous nanostructures which reveal a certain degree of assembly.

PACS

81.05.Zx; 81.07.-b.

Time-resolved photoluminescence of silicon microstructures fabricated by femtosecond laser in air

Green photoluminescence (PL) from silicon microstructures fabricated by femtosecond laser in air was studied at different temperature by time-resolved spectroscopy. The PL decay profiles are well fitted by a stretched exponential function: I(t)=I(0)*exp[-(t/τ)β]. The dependence of the decay time constant τ and of the stretching index β on PL photon energy and on the temperature is investigated. A model of transport and recombination of the carriers is introduced as a possible explanation of the stretched exponential decay. The nonradiative recombination rate of the localized carriers, which is dependent on the carrier density and influenced by the trapping site density and the temperature, is deduced to be responsible for this kind of decay.

Laser-assisted solid-state synthesis of carbon nanotube/silicon core/shell structures

A single-step solid-state synthetic approach was developed for the synthesis of silicon-coated carbon nanotube (CNT) core/shell structures. This was achieved through laser-induced melting and evaporation of CNT-deposited Si substrates using a continuous wavelength CO2 laser. The synthesis location of the CNT/Si structures was defined by the laser-irradiated spots. The thickness of the coating was controlled by tuning the laser power and synthesis time during the coating process. This laser-based synthetic technique provides a convenient approach for solid-state, controllable, gas-free, simple and cost-effective fabrication of CNT/Si core/shell structures.

Laser-assisted production of spherical TiO2 nanoparticles in water

TiO(2) nanoparticles with controllable average diameter have been obtained by laser ablation in water. A monomode ytterbium doped fiber laser (YDFL) was used to ablate a metallic titanium target placed in deionized water. The resulting colloidal solutions were subjected to laser radiation to study the resizing effect. The crystalline phases, morphology and optical properties of the obtained nanoparticles were characterized by means of transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), x-ray energy dispersive spectroscopy (EDS) and UV-vis absorption spectroscopy. The colloidal suspensions produced consisting of titanium dioxide crystalline nanoparticles show almost perfect spherical shape with diameters ranging from 3 to 40 nm. The nanoparticles are polycrystalline and exhibit anatase as well as rutile phases.

Characterization of MHz pulse repetition rate femtosecond laser-irradiated gold-coated silicon surfaces

In this study, MHz pulse repetition rate femtosecond laser-irradiated gold-coated silicon surfaces under ambient condition were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). The radiation fluence used was 0.5 J/cm2 at a pulse repetition rate of 25 MHz with 1 ms interaction time. SEM analysis of the irradiated surfaces showed self-assembled intermingled weblike nanofibrous structure in and around the laser-irradiated spots. Further TEM investigation on this nanostructure revealed that the nanofibrous structure is formed due to aggregation of Au-Si/Si nanoparticles. The XRD peaks at 32.2°, 39.7°, and 62.5° were identified as (200), (211), and (321) reflections, respectively, corresponding to gold silicide. In addition, the observed chemical shift of Au 4f and Si 2p lines in XPS spectrum of the irradiated surface illustrated the presence of gold silicide at the irradiated surface. The generation of Si/Au-Si alloy fibrous nanoparticles aggregate is explained by the nucleation and subsequent condensation of vapor in the plasma plume during irradiation and expulsion of molten material due to high plasma pressure.